MSI KT4 Ultra 6590 destroyed "L19"

Hi!
While trying to change the cooling system I pushe my srew driver too much in so I destroyed the Spool (??) L18 near the CPU which is (At least in my opinion) important for the AGP, which means that the Computer boots normally but without image on the screen!
The Question is: how can I change the spool?
Where can I get one to replace it??
which Induction Capacity does it have to have?
mike

Hi,
The answers to your questions I got from MSI for L18:
it can only be done if he has knowledge or experience in soldering
normally, the spare parts can be bought on hardware parts store selling capacitors/resistors etc.
L18,inductor,10n/5%,0603,400mA,RDC=0.26 ohm

Similar Messages

  • Need Help for msi kt4 ultra (6590)

    Mine Windows XP is not compatible with the promise serial ata driver ;(
    The system is much unstable one
    I cannot use the controller serial ata
    What I can make??
    Thanks
    Fede

    During installation XP it says to me that the driver they have not exceeded the compatibility test.
    Windows advises me not to continue.
    But I can make to work the raid with a single disc ATA
    Thanks
    Fede

  • Windows XP and MSI KT4 ULTRA 6590-FISR

    Has anyone figured out how to do a clean install of Win XP with this board?
    I keep getting a "Device Not Certified error", at which point I elect to IGNORE the error and continue.  There is absolutely NO INDICATION of what the problem device is.
    However, at exactly 34 minutes left "Installing Windows", the installation routine locks up and I can't go any further.

    The 2nd day into this,(I am on day 5) I took out my RAM and replaced it from another machine...same problem.
    I then took out my PS and replaced it from another machine...same problem.
    Diagnosing/testing all RAM and the PS showed no problems.
    I then went through the BIOS and performed a multitude of enabling/disabling system settings.  By disabling the following INTEGRATED PERIPHERALS/OnBoard PCI Controller Item:
             LAN Controller
    I was able to get Windows XP to load.
    However, I cannot get XP to boot...not in NORMAL, or SAFE or SAFE with NETWORK, SAFE with PROMPT.   But I am making progress.

  • PROBLEMS AGAIN, MSI KT4 ULTRA GIVE POOR STABILITY IN MY SYSTEM!!!

    Hi, i get problems when overclock (fsb) my cpu with 133 fsb to 136 ONLY!!! , only support the overclock my cpu 1800(1533mhz)--to(1580mhz), high fsb 137 or high  freeze , restart  my system when run games or aplication with geforce 3 ddr 64mb, i modify vol agp to 1.8 , but get error again.  
    HELP ME!!!
    I NEED NEW BIOS THAT  STABILIZE MY SYSTEM!!!
    System:
    MSI KT4-ULTRA 6590-SR
    CPU XP 1800+
    256 DDR SANSUMG
    T.VIDEO GEFORCE 3 DDR 64 detonator 41.09 agp4x
    WINDOWS XP PRO SPK1
    POWER 350 WATTS CODEGEN

    Thanks for you help, but my power 350 watts codegen work a:
    20A---3.3v
    30a---5v
    However i read guide revision 12-12-02 about psu and all configuration is correct  !!!!!!
    My powersupply not is problem
    I NEED THAT MSI MAKE NEW BIOS FOR KT4-ULTRA!!
    Thanks  

  • KT4 ultra (6590) and Randeon 8500 instability

    This is my pc:
    Msi Kt4 Ultra (6590)
    Athlon Xp 2000+
    512 mb ddr pc 2700
    Ati Radeon 8500 Ret.
    maxtor diamondplus 8 80gb
    Pioneer DVD 16x slot-in
    Asus ISDN Adapter internal
    Skystar 2 DVB sat Adapter
    Power Supply Deer 350 W (amd certificaded)---- 5v/35A
    3,3/24A
    Monitor 19"  Philps 109B.
    S.O WinXP PRO SP1.
    My systems runs great but when i play games sometimes my system crash and (very curios) before about 3-5 min of game play i see small interferences like small  white orizzontal  jolt similar the interference when a cellular phone ring near the monitor. the problem it persists with any resolution and any monitor refresh rate !!!!!  
    What i've tested:
    I have the lasted KT4 ultra bios, test any Randeon Drivers (include the lasted 779 beta drivers) and lasted via's drivers
    Near my monitor there isn't any interference source !!
    Monitor is perfect (tested in other system )
    it's not Radeon8500 problem because i play games perfectly in other system (a7v266 and same hardware)
    KT4 are not damaged because i play game perfectly with another video card (geforce2 Mx400)
    It's not a PSU problem because i replaced AMD athlon 2000 + with AMD Athlon 900 (the rest hardware is the same) and the problem it persists.
    although i have 5 years experience under PC assemblage  ,   I do not know that what to make!!!
    is There an incompatibility with Radeon8500 and KT4 Ultra  ??
    Please someone can help me ???  ;(   ;(

    It might be the AGP driving value problem. Set it to EA in BIOS. It works for most people with components like yours.  If that does not help, switch to AGP 2x and see if the problem went away. If it did, look for other DGP Driving values and turn off some AGP related features (sideband, fastwrite etc)
    If that did not help,
    See this post and try to draw come conclusions. Sometimes the Power Supply is at fault not because of being underpowered (which you checked with Athlon 900) but because of the incorrectunstable voltages and other similar crap. With 266Mhz fsb and 333Mhz memory interface the boards now are too sensitive to cheep power supplies.
    Good Luck
    KT3 Ultra2
    Athlon 1800+
    PowerColor Radeon8500 128mb
    No-name 512 memory
    No-name 400W power supply

  • MSI KT4 ULTRA MS-6590

    I have this motherboard: MSI KT4 ULTRA MS-6590 sempron and I have already bought the new CPU SEMPRON (AMD Sempron 2400+). I want to know if my motherboard is compatible with new CPU.
    Thank you 
    Sorry for my English, but I'm Italian.

    Hi
    Not according to http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=356&kind=1

  • MSI KT4 Ultra-SR (MS-6590) And IDE3

    Rig is As Follows:
    MSI KT4 Ultra-SR (MS-6590)
    AMD Athlon 1000Mhz  :(
    512MB DDR333 (PC2700) x1 stick  
    MSI GeoForce 4 Ti4200  8)
    IDE1: Western Digital 40Gb 5400rpm (win xp pr) as master & Maxtor 80Gb 7200rpm as slave
    IDE2: Liteon 52x24x52 CD-RW  )  as master & Samsung 12x DVD as slave.
    Soundblaster 5.1 Live PCI
    350w Power Supply
    MSI D-Bracket 2 &  S-Breackets Fitted Also.
    I have Three Questions.
     >My CPU has a FSB of 200, but the bios (version that came with board) shows it as 100 FSB. See here for athlon bus speeds
    Is it ok to increase the bus speed without damaging the processor.
    >The two brackets that i have fitted (s and d brackets) do not work. Why?
    >What are the optimal and settings for my ram (PC2700 512MB DDR) and GFX Card (MSI GF4 TI4200).
    >Oh yeah, my CPU is now operating at a higher temp than before (using old K7VZA ECS Mobo) @ 50-55. Is this normal??
    Sorry for the n00b questions, it's just that this is the first time iv ever taken my PC to pieces and re-configured it myself  :P
    Thanks in advance.   -RjA

    I can help a little  1000MHZ AMD chip=200FSB XP CPUs=266FSB this is CPU speed . AMD 1000MHZ CPU needs to run @100FSB where a XP CPU can run @133FSB This is MEMORY speed . Trying to crank that poor old chip up to anything other than 100 will do you NO good. You need to buy a bigger cpu of the XP kind. A lot of the older XPs can be had for a low price. 50c isn't not super hot. My KT4 runs in the 40s. You might want to think about a bigger cpu cooler to bring the temps down a bit. Most of your settings should be left at system default, since you only have a 1000MHZ CPU. When you go up to an XP then you can make a few changes. Regards BIGDADDY51 :D  :D

  • Problem with my MSI KT4 Ultra

    Hi all!
    I have a BIG problem, I have tried to look at this board, but there is many different answers out there  ;(
    I have KT4 Ultra with Athlon XP 2600+
    I have set FSB to 166, and when I startup BIOS says Athlon XP 2600+.
    But in windows system, it only says:
    AMD Athlon XP2600+
    2.09Ghz !!!!
    768Mb RAM
    Why is windows only says 2.09Ghz??
    AND, I think my system is very slow. I used to have AMD 1200Mhz. And this sytem is almost like my last computer.
    My System:
    MSI KT4 Ultra ( MS-6590 ) with BIOS
    CPU AMD Athlon XP 2600+
    768MB DDR 400 RAM
    GeForce 4 TI4200AGP 8x
    80 Gb Seagate 7200 Harddrive

    Quote
    Originally posted by swedecom
    Ok, I use these settings in my BIOS, are they right for my system??
    MY SYSTEM:
    MSI KT4 Ultra ( MS-6590 ) with BIOS
    CPU AMD Athlon XP 2600+
    768MB DDR 400 RAM
    GeForce 4 TI4200AGP 8x
    80 Gb Seagate 7200 Harddrive
    MY SETTINGS IN BOIS:
    Spread Spectrum = +- 0.25%
    CPU FSB Clock = 166Mhz
    CPU Ratio = Auto
    CPU Vcore = (V) Auto
    DDR Voltage (V) = Auto
    Termination Vol (V) = Auto
    AGP Voltage (V) = Auto
    Hope someone can help me out  

  • KT4 Ultra (6590) need update of the Promise SATA RAID Controller PDC20376

    The last Bios update AMI 1.4 for the KT4 Ultra (6590) have built in the bios version 1.00.0.18 for the PDC20376 (Promise 376).
    I can configure 2 maxtor (6E040T0) sata1 in a raid0 array and it works under WinXP SP3,
    but the 2 drives are working in UDMA5 according to the FastBuild Utility when the motherboard specifications talks about 150Mb (SATA1).
    It's not an OS problem because the FastBuild Utility at Bios startup show the UDMA5 mode for HDD.
    It's not a Maxtor 6E040T0 (SATA1) problem because have no jumper to set.
    The Promise support center don't provide support for built in raid controller but the responce was that it's related to a known bios issue of the controller, so i have to update.
    For the last Bios version for the S150 TX4 controller look at:
    http://promise.com/support/download/download2_eng.asp?productId=108&category=all&os=100&go=GO
    It's impossible to update the bios with the promise tool because the controller is integrated in the motherboard.
    I read for example than on the motherboard K7N2 Delta-ILSR the bios version of the Promise 376 controller is 1.00.0.21:
    https://forum-en.msi.com/index.php?topic=92756.msg665966#msg665966
    I think the only solution is a modding bios, where i have to replace only the Promise controller bios but:
    1) The tool amibcp.exe can't open the A6590VMS.140 AMI bios (renamed .rom), i don't know why!!!
    2) What promise controller bios rom file is good?
    Can anyone out there help . . . please ?

    This is my results compared to my other UDMA6 HDD on IDE1, HDTach long bench stop with "Read Error" and only quick bench works.
    The version of the Controller driver under WinXP-SP3 is 1.0.1.29 and I configured the driver in the PAM Utility with:
    "Driver Write Cache" enabled and "Write Back" as cache settings (The 2 Maxtor SATA1 in RAID have 2MB of cache, but i don't know How many cache have the controller!!).
    The Burst Speed is too strange!!! quick bench error?
    I made it so your image is clickable.
    -Frankenputer

  • HELP! HELP! HELP! KT4 Ultra (6590)

    Hi People,
    About a month ago I bought a new system... Here are the specs....
    - AthlonXP 1800+
    - MSI KT4 Ultra (MS-6590)
    - 512 Mb DDR PC2700 (Spetek)
    - MSI GeForce4 MX440 AGP
    - Maxtor DiamondMax 9 60Gb IDE
    - LG CD-RW 52x24x52 IDE
    - Generic 60x CD-Rom IDE
    - 320w Power Supply (AMD Certified)
    I have the following problem... RANDOM BOOTS! :( I dunno what is the problem... But I have some questions to MSI and for you... My KT4 hasn´t a cooler chipset on northbrigde, is it normal? Cause my system temperature is between 46ºC (idle) and 48ºC (full)... and my CPU is 47ºC (idle) and 52ºC (full)... HELP! HELP! HELP! What should I do? Ah, BIOS version is 1.2...
    Best regards,
    Bruno.

    Your PC setup is pretty similar to mine. I had similar reboots as well and suspected the KT4 Ultra. It turned out to be a dodgy stick of RAM. Try the ramtesters from http://www.simmtester.com and http://www.memtest86.com, they'll definately find any RAM problems. Other than that disable the auto reboot on crash and see what the message on the Blue Screen tells you.
    For info, since my rebuild with a new stick of ram I'm running...
    4in1 v4.45
    Latest MSI drivers from MSI Update v2 (except the beta graffics driver)
    Bios 1.3 (though 1.2 seemed ok to me)
    XP SP1 with all updates from MS.
    Hope this helps...
    YT

  • No optical-out sound on MSI KT4-Ultra!!

    Hi, I have recently set up a system based on the MSI KT4-Ultra board. I'm using an Athlon XP 1700+, a Radeon 9000 video card, and I've installed Windows 98.
    Although all the drivers and audio applications which MSI provided installed fine, and 2-channel audio from the on-board sound chip works great both for music and for the 3-4 games I've installed so far, I can't seem to get the optical SPDIF port to work! I bought a cable and connected the computer to my Sony MD-player and attempted to copy my CDs onto MD. I go into the MSI control panel and check the box to enable SPDIF-out, removing the speaker cable from the analog line-out just for good measure. When I plug the optical cable into my MD it recognises digital input and prepares for recording. I press record on the MD and play on the computer's CD-player app, but the MD LED shows "no signal". I'm pretty sure both the MD recorder and cable are OK since I've used them to copy CDs from a Kenwood portable CD-player quite recently, so it must be the MB that's giving me problems. Indeed, when I've stopped playback in the CD-player app and went back into the audio control panel, I found that the SPDIF box had been unchecked of its own accord. I've tried this several times, and I've unplugged the S-bracket and reinstalled it all over again just to make sure it was plugged in properly, and I still get the same problem. All audio works fine except optical out! Haven't got a coaxial cable or recorder so I can't check if the coaxial port is equally buggered or if it's just the optical, but I'm getting really annoyed here: this was the one feature I liked best about this board and the only one which isn't working! Any ideas, anyone?

    dude, i think i can get u ur signal, but currently i can only get silent recordings, u may have better luck.
    on the minidisc, there should be a switch or button that will toggle synchronised recording on and off, turning it off should get u a signal, but it wont be in sync wiv the cd, ie u cant trust it to form track gaps.
    hope that helps, done flame me if it dont, if i manage to get substance to my recording, i will send u the info just in case.
    take it easy

  • Linux and MSI KT4 Ultra : DVD problems

    Hi, I own an MSI KT4 Ultra Pure mobo.  The vt8235 Southbridge is supported in the lastest version of the Linux Kernel, 2.4.20 . After upgrading the kernel all seems to work fine, but when the system try to initialize my hdc (Secondary master of IDE, a DVD reader DV-5800A from NEC) it locks up with the message :
    hdc: device {Busy}
    hdc: drive not ready for command
    ide1: reset success!!
    and start looping with this message.
    What can I do to get work my DVD Reader? With my precedent MoBo it works perfectly
    Thanks
    Bye

    Hmmm that error used to happen with an older kernel and an ALI chipset. If you leave it long enough does it give up trying and continue to boot? The ALI did this eventualy.

  • MSI Kt4 Ultra - Sound on Board

    Hello, I have a problem with my onBoard sound.
    Sry for my english, I am german.
    I have a SB Live Volue soundcard and i want to install it, but when i deactivate the onBoard sound i cant't delete the drivers from it.
    Pls, help, how can I deactivate the Sound-on-board, and install my other soundcard right ?
    Pls, when someone is German here, write in german.
    thx.

    Yes, I disabled it in "Integrated Peripherals" the "Serial ATA Controller" and the "Audio Controller".
    Is there someone more, I have to disable ?!
    Or have I to deactivate it on the mainboard, too ?!
    And how can I delete the drivers from Windows ?!
    This drivers are:
    Audiocodecs
    Legacy-Audiotreiber
    Mediensteuerungsgerät
    Vidiocodecs
    I have Windows XP and Win2k, because I use Partition Magic and Boot Magic.
    MSI KT4-Ultra
    Athlon XP 2000+
    GeForce4 MX 440
    256 DDR Samsung 333Mhz
    SB Live 1024
    Midi Tower 350 Watt

  • MSI KT4 ULTRA-BFISR + Ati Radeon 9700 pro = not good??

    Hello everybody!
    First of all, i youst have to say that i think MSI have the best motherboards....
    Here's the problem (i haven't buyed anything yet!):
    I am going to buy MSI KT4 ULTRA-BFISR and ATI Radeon 9700 Pro, but i have read many places that Radeon aint working with MSI KT4-based cards! Im am going to buy an 520W Power (i aint so good in english so i hope you now what i write  :D )
    I am also going to buy 2 x Cosair pc3500 xms ram... Is this one working with the motherboard by the way?
    But my question is: Will the Ati Radeon 9700 pro work with this card? (i must remember to buy the 1.3 version!) I am gonna get my Radeon 9700 pro from USA, how can i now when i order that is an 1.3 card?
    Thank you for answering!  :]

    I think also that even there is two drivers, that is not a reaseon why it isn't work. One time I install only standard VGA drivers, but result was that I got two standard VGA driver.  8o
    First time I try without VIA drivers, then with 4.42 and 4.43 VIA drivers. Result was almost same all the time, it always crash when Nature test start, but this exist also to older mobo (Abit KT7A-RAID). Problem exits few games they lock up or stuttering. Ati demos works fine, but one time that car demo stuttering a lot, but I transfer data at same, so I'm not sure what was reason.
    This moment I don't have possibilities to try Hyperion 4.45 drivers or something else, because it's my friend computer.  
    MSI KT4V 6712 (Bios 1.0)
    AMD Athlon 1.2
    512 MB DDR 333 RAM
    SoundBlaster Live
    ATI Radeon 9700 Pro (Club3D)
    Power 300W
    Realtek Ethernet card
    Samsung 40GB harddrive
    Samsung DVD
    VIA 4.42 and 4.43
    WIN98

  • MSI KT4 Ultra! A little question.

    Hello. )
    I'm very interested, in the new MSI KT4 Ultra, but i've a doubt:
    The pure version of the KT4 Ultra, has a fan on the chipset?
    How many IDE channels come with this pure version?
    Thank you, and sorry about my poor english.  :D

    You can modify de FSB in the bios, but there is a jumper that provides these 3 options, 100mhz, 133mhz and 166mhz. 100mhz for the duron cpu's, 133mhz for the Athlon xp  Palomino and Tbred, and 166mhz for the athlon xp Barton ( not 100% confirmed).

Maybe you are looking for

  • TCode MIR7: Dump while deleting Parked Invoice with zero value

    Hi, We had parked an Invoice using TCode MIR7 with Zero Value with reference of a PO. Now as the value of invoice is zero, we want to delete it using MIR7. In MIR7, when we go to Invoice Document-->Delete, it results in dump. Dump is as follows: Erro

  • BerkeleyDB build  problem -4.6.21( segmentation fault)

    Hi Im using HP-UX11.11 PARISC... When Im trying to build the and install the binaries are created , When i do ./berkeley_db_svc -V.. it creates a core dump Can anyone please tell me how to solve this issue Since i need to install binaries in (local d

  • Little dots automatically fill the password field

    On my iMac I have three accounts, mine, my wifes, and a guest account. When the system is at the login screen, if I click my icon to log in, the password field starts filling up with "characters" (dots) all on it's own. I have to hold the delete key,

  • DISK REQUIRED NOT FOUND????

    DISK REQUIRED NOT FOUND, WHAT DOES THAT MEAN??? THAT ONLY HAPPENS WHEN I TRY TO PUT A MOVIES ON MY IPOD!!! IT WILL UPLOAD INTO ITUNES(A SMALL BLUE DOT) IS NEXT TO THE NAME OF THE MOVIE THAT WONT UPLOAD INTO MY IPOD. YES ITS THE RIGHT FORMAT AND EVERY

  • My Internal Speakers sound drive is missing after I uninstalled Logmein?

    How can I reinstall this driver if I don't have a backup I can run? I uninstalled logmein because it hijacked my sound. Now all I have listed under drivers is headphone port.