MSMQ workgroup issues discovering queues

I have a problem discovering queues in workgroup servers.
The technical information:
WIndows 2008 R2
MSMQ 5.0
MP MSMQ 2008R2
When I try to discover queues the user discovering it (execute script) is WORKGROUP\xxxxx. I test to use "Local System" "Network Service", runas account.... but didn't work.
The script Discoverqueues.vbs fails with "left".
I found this threath but I don't understand how is be able to use fqdn in a workgroup server.
http://social.technet.microsoft.com/Forums/en-US/8930cfee-6a7f-43e7-aa19-a20ea634c736/fix-a-bug-in-a-management-pack?forum=operationsmanagermgmtpacks
I discard the solution to unsealed MP and reconfigure script.
Can anybody help me?
Thanks a lot.

Hi,
Please check if the following post is helpful.
http://social.technet.microsoft.com/Forums/en-US/8b345a05-c3d7-422b-801c-e207e26ae601/msmq-discovering-queues
Niki Han
TechNet Community Support

Similar Messages

Issue with queues

Hi,
We have an issue with queues in our PROD server. We are having about 35000 IDOCs stuck in 'smq2' with the IDOC on the top of the list in SYSFAIL status, with the message <b>'Problems found during the EXPORT to specified keyin table'</b>.
The short dump on ST22 says 'EXPORT_TABLE_UPDATE_CONFLICT'.
Please advise.
cheers,
Prashanth

Prashanth,
I think this is the issue with the database. Can you check whether the database is having enough space or not. If not kinldy increase the space.
This thread is having the same issue. Check this it may help you:
Process Integration (PI) & SOA Middleware
---Satish

Issue listeneing queue from Weblogic Cluster server with multiple managed server

Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
Weblogic Cluster structure is like
Weblogic Cluster01
--ManagedServer01(http://server01.myhost.com:7001)
--ManagedServer02(http://server02.myhost.com:7001)
JMS Servers
JMSserver01 targeting: ManagedServer01
JMSserver02 targeting: ManagedServer02
JMSmodule
ConnectionFactory01 targeting:JMSserver01,JMSserver02
UDQueue01 targeting:JMSserver01,JMSserver02
Uniform Distributed Queue in Monitoring tab showing like this
mysystemmodule!JMSserver01@UDQueue01
mysystemmodule!JMSserver02@UDQueue01
So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
mysystemmodule!JMSserver01@UDQueue01 10
mysystemmodule!JMSserver02@UDQueue01 10
But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
mysystemmodule!JMSserver01@UDQueue01 0
mysystemmodule!JMSserver02@UDQueue01 10
untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
Solutions that tried
1) we have tried give both server URL coma sparated in provider URL
we need to configur same scenario for 5 managed server with 3 listener on other servers.
Do any one have solution for this.

You need to have:
1. Consumers connected to each UDQ member
OR
2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
For example you can set it to 10 (10s)
Additional Information here:
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
I hope this helps
Best Regards
Luz

MSMQ Discovering queues

Hi
Im having a problem discovering any queues with the MSMQ management pack. The servers are discovered fine as MSMQ 2008 R2 servers. Im wondering if the problem is with the run as accounts. The servers are not on a domain so ive created two Windows runas accounts:
servera\monitor
serverb\monitor
Ive added two entries on the run as profile. servera\monitor is targeted at the servera msmq 2008 R2 server object, and serverb\monitor at the other MSMQ server object.
The following events are logged on servera and serverb:
Event 1:
DiscoverQueues.vbs :
Calling MP Element ID: {A02F8DCE-37D2-0383-DE7E-BD1733219EBB}
Discovery started with following parameters:
Source ID: {A02F8DCE-37D2-0383-DE7E-BD1733219EBB}
Managed Entity ID: {E2820D42-91F3-1663-C20E-42A3F815EC89}
Computer: ded2455
Network: DED2455
Discover Public Queues: True
Discover Private Queues: True
User credentials: WORKGROUP\queue_monitor
Event 2:
The process started at 11:03:48 failed to create System.Discovery.Data. Errors found in output:
C:\Program Files\System Center Operations Manager 2007\Health Service State\Monitoring Host Temporary Files 14\4945\DiscoverQueues.vbs(124, 2) Microsoft VBScript runtime error: Invalid procedure call or argument: 'Left'
Command executed: "C:\Windows\system32\cscript.exe" /nologo "DiscoverQueues.vbs" {A02F8DCE-37D2-0383-DE7E-BD1733219EBB} {E2820D42-91F3-1663-C20E-42A3F815EC89} "servera" "MSMQ" "true" "true" "True" "true"
Working Directory: C:\Program Files\System Center Operations Manager 2007\Health Service State\Monitoring Host Temporary Files 14\4945\
One or more workflows were affected by this.
Workflow name: Microsoft.MSMQ.2008R2.DiscoverQueues
Instance name: servera
Instance ID: {E2820D42-91F3-1663-C20E-42A3F815EC89}
Anyone got any ideas? The public and private queues in SCOM just remain empty. Ive also set the monitor account to be able to access the private queues.
Thanks
Chris

Looks like it is still using the wrong credentials there
User credentials: WORKGROUP\queue_monitor
But you could try to remove the runas credentials again and have it just use its default LocalSystem account and see if that one picks up anything to monitor.
Bob Cornelissen - BICTT (My BICTT Blog)

Issue w/ Queues in Server 10.5.5, Xerox 7760s: They print, but offset

A little background:
Currently we have a mix of 80 fully patched 10.4.11 and fully patched 10.5.5 clients printing directly to 4 identical Xerox Phaser 7760DXs via ipp. They work great. No problems with clients printing directly to the printer.
-BUT-
For reasons beyond the scope of this post, we MUST move the clients to use server queues (PaperCut).
Server is now a clean test server running fully patched 10.5.5 OS X Server with just print services running.
We set up 4 queues the usual way, and then set clients to print to the named queues via LPR, designate the correct driver/ppds on the client.
The clients CAN print, however, out of every app we try, from TextEdit to Illustrator CS3 -anything-
the print outs are blown-up or offset really noticeably -
Say you set up Preview to
print a 7"X5" jpg to centered, on tabloid in landscape. Set the scale option to %100 (no scaling) and
it prints basically off center: up and to the left about 25% of the total page size- really off.
Again, not app related, textedit does this with a single word of centered text, photoshop CS 3, BBEdit, Firefox, etc every print, all print out offset more or less to the same degree, no matter how one sets them up.
Same clients, setups, but printing to the printer directly, rather than by the queues, in all the same apps, you never have this issue.
We did look at this as far as the pstop file version and 10.5.5:
http://www.macosxhints.com/article.php?story=20080925104227545&query=print%2Bque
and no, substituting the older pstop files did not correct the situation.
Ideas, input greatly appreciated.

A little background:
Currently we have a mix of 80 fully patched 10.4.11 and fully patched 10.5.5 clients printing directly to 4 identical Xerox Phaser 7760DXs via ipp. They work great. No problems with clients printing directly to the printer.
-BUT-
For reasons beyond the scope of this post, we MUST move the clients to use server queues (PaperCut).
Server is now a clean test server running fully patched 10.5.5 OS X Server with just print services running.
We set up 4 queues the usual way, and then set clients to print to the named queues via LPR, designate the correct driver/ppds on the client.
The clients CAN print, however, out of every app we try, from TextEdit to Illustrator CS3 -anything-
the print outs are blown-up or offset really noticeably -
Say you set up Preview to
print a 7"X5" jpg to centered, on tabloid in landscape. Set the scale option to %100 (no scaling) and
it prints basically off center: up and to the left about 25% of the total page size- really off.
Again, not app related, textedit does this with a single word of centered text, photoshop CS 3, BBEdit, Firefox, etc every print, all print out offset more or less to the same degree, no matter how one sets them up.
Same clients, setups, but printing to the printer directly, rather than by the queues, in all the same apps, you never have this issue.
We did look at this as far as the pstop file version and 10.5.5:
http://www.macosxhints.com/article.php?story=20080925104227545&query=print%2Bque
and no, substituting the older pstop files did not correct the situation.
Ideas, input greatly appreciated.

Critical issue - delta queues for LIS empty after upgrade BW3.5

The delta queue in R/3 for LIS sources (S260-261-262) remains empty,
even after a successful init delta. Hence I cannot extract delta
records.
BW3.5
PI2004.1
Does the BW upgrade has an effet on the delta queue management in R/3 ?
The previous configuration BW2.0B PI2004.1 did work fine in that
respect.
Laurent Querella
BI Consultant ALTI

Laurent,
from OSS Note 534296 'LBW0: DataSource generation possible for SAP info str.' you can read:
"(...)it is no longer possible to generate DataSources for info structures (transfer) Snn delivered by SAP (where nnn is between 001 and 500) in the BW interface for LIS info structures (TR: LBW0) in the OLTP. (...)The corresponding DataSources are delivered with the Business Content."
I think this is the issue...
However, are you saying that all infostructures are empty ?
And from where your init is taking data ?
After an init your delta tables have to be empty...did you empty all these tables before doing your upgrade ?
Bye,
Roberto

BPM Issue with Queue

HI All,
I created a BPM in our upgraded PI 7.0 SP10 server. However every message is getting the scheduled in Outbound queue(Green Flag) while trying to go to the BPE. I checked SMQ1 and found that the messages are failing with the following error "Password logon no longer possible - too many failed attempts" using user XIISUSER. Now is is confusing to me, because this user is NOT LOCKED. Also, I tried various other users to the same error. Is this some type of new issue with 7.0 compared to 6.40? How can I solve this? I even changed the password of XIISUSER and still no avail. Can this error be turned off in the instance profile?
Thanks for the help!
Chris

Hi Richard,
maybe it's not the user who is locked but his wrong password
somewhere?
check places where do you use this user and change the passwords there too
like RFC dest : INTEGRATION_DIRECTORY_HMI
and other
do you understand the idea ?
Regards,
michal

[Discover] Discover queue and voiting

Discover feature and spotify recommendation is one of the best thing I found in this application.I've noticed spotify replace me all recommenced songs around every week. And here is the first problem , sometimes i dind't had enough time to listen all songs. So I would like to have some queue. Of course now you might thing that, recommendation musinc is generated based on what I listen. so there is not point to show some old history reconnection if I started to listened other category. I thing there should be a way to go to the recommendations history or just don't remove from a week before only add for current week.The second this is that there should be voting button for each song you recommend me, to improve the algorithm settings you apply for recommendation .

CONGRATS on your success with Discover chat!!!

Frequently getting issue in queues

Hi Gurus,
Can any body tell me the resolution for one of the issue which we are currently facing is 'object is locked by this user xxxxx" we are getting in smq2 of
ecc system so we are resolving this issue by resetting the status of queue so it is working fine when we do this activity so again after few hours again
we are getting so whom do we contact to resolve this issue as a pi consultant im manually processisng all these activities for every hour , can any body give the suggestion for this.

Hi,
A temp solution that might help you while you try and sort out the problem. Is to schedule these jobs to restart the queues every 15min or 60min so it can start processing again. Please also have a look in SM12 when to see what locks there are.
How to use SAP's WebAS J2EE's JMS Queue in Exchange Infrastructure
how to restart queues in smq2 automatically
Messages Stuck in ECC SMQ2
Regards,
Jannus Botha

Issue in Queues

Hi Gurus,
We have Oracle queues jobs and recently it was migrated from 9i to 10g. After this migration some of the queues stopped after starting and if I start it again it runs normally. What will be the cause of this issue. Due to this I need to do manual propagation each time the queue has new data. Thanks in advance for your help!

CHeck your error log or even the alert log to find out why the jobs have stopped. Also consider to upgrade from DBMS_JOB to DBMS_SCHEDULER an/or Oracle Pipes to Advanced Qeueing (in case you still used pipes).
Message was edited by:
Sven W.

MSMQ Permissions issue

Hi all,
I've got a windows 2012 R2 cluster with three nodes and three services that connect to their own MSMQ instances. For some reason, one of the services is throwing out 'access denied' messages when trying to listen to the private message queue even though
I have changed the permissions on the queue to everyone full control.
What permissions are required for a cluster service to listen to a private MSMQ? Obviously it needs more than just everyone - full control.
Thanks,
Gary Williams

Hi,
Thank you for posting in Windows Server Forum.
The meaning of the bindingInformation attribute varies for each protocol, but for net.msmq this refers to the server that hosts the queues that IIS should be listening to. In our multi-server scenario we will be putting our queues on a separate server called
msmqserver.
You can check below article might useful for your case.
MSMQ, WCF and IIS: Getting them to play nice (Part 2)
http://blogs.msdn.com/b/tomholl/archive/2008/07/13/msmq-wcf-and-iis-getting-them-to-play-nice-part-2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Issues discovering IPhone5 personal hotspot on wifi

I have a MacBook Retina, using OSX 10.9.3, I usually use personal hotspot on my IPhone5, while it works fine when I have the IPhone connected via USB Cable, If I want to connect via WIFI, it doesn't properly discover my IPhone wifi hostspot (I dont see the network in wifi list) even if the phone is very close, I have to switch on/off personal hotspot option several times on my phone, as well as turn off/on wifi on the mac after which I can see & connect to network. Where as it works fine with a Windows 8 laptop, even if the laptop is in another room about 10-12 feet away.

Try this:
Connect your phone to iTunes and check the name of your phone. If it has an apostrophe in the name such as Greg's iPhone, then you need to edit the name and remove the apostrophe. You can youtube "How to Change the iTunes iPhone Device Name" for easy instructions.
Hope this helps.

Two issues discovered: 5d tether and import movie files

Using both the Canon 5d and 5d Mk2 I had the computer hang on import. In both cases I shot several frames in rapid succession. The 5d hangs after about only 3 rapid frames, the Mk2 after about 9. I'd guess this has something to do with the buffer. Has anyone else encountered this?
Also, when importing some movie files, it hangs and I have to force quit to get out of it. It's not consistent, and I even have to restart on occassion to clear this out.
RAM, processor and disk space should not be an issue-it's a new iMac 27"with 16GB RAM, 2.8 GHz i7 CPU, 2 TB HD with 1.82 TB free. OS 10.6.2.
Are these bugs in the beta, or is something else happening?
_Jeff Shaffer

Best to post this in the Beta forum so the Adobe folks who are monitoring the feedback can read it.

An issue about queues and context

Hi all
I have a value form one queue with some context and I want to add the same context to another queue
I have this starting point in the first queuecwith context after each number
30
30
10
10
20
20
10
10
10
10
90
90
10
10
And in the other queue
100
100
100
100
100
100
100
100
100
100
100
600
100
100
100
100
100
100
The color indicate the context change.
I want to give the same context of the first queue to the second queue because I am mapping one to one field into the target node.
The second queue is longer than the first one but that is ok as long as I can get the first value to right context of the first queue
Thanks

HI again
Do I have to use the format by key insted of changing the context.
I have tried but I am getting this error
formatByExample: Queues do not have the same number of values] in class com.sap.aii.mappingtool.flib7.NodeFunctions method
It is quit a copmlex mapping , I do not think I can use format by key.
any idea how to change the context
Thanks

Issue - CIF queue for activation of IM requiring manual activation.

Hi,
For inbound setting, the CIF queue for activation of IM is getting stuck with ready status. Consequently the background job getting failed with time limit exceed status.
The same queue when activated manually, gets cleared. Thus requirng manual intevetion.
Please suggest solution to get rid of this manual intervention.
Thanks and regards,
Sushant

Hi Sushant,
If you use inbound queues check QIN scheduler on SCM side - transaction SMQR.
From help:
Call transaction SMQR and choose Registration.
Enter the queue name CF* and make the required settings.
EXEMODE: Execution mode (D - Dialog work process; B - Batch work process)
MAXTIME: Maximum runtime that the QIN scheduler uses for activating a destination;
default value: 60 seconds
USERDEST: RFC destination with LOGON data. Specification of a logical destination
with its own language on the local
system. This means that the burden of integration can be distributed to a server group.
NRETRY: Number of repetitions for failed calls, default value: 30
RDELAY: Wait time between individual calls, default value: 300
Regards,
Alexander

MSMQ workgroup issues discovering queues

Similar Messages

Maybe you are looking for