Multi-org Tables & Views in R12

We r in the process of upgrading Oracle Applications from 11i to R12. Now my question is
1. What about the Multi Org related tables once we get upgraded to R12 since the Multi Org choice is provided at the form level itself in R12.
2. Do the views related to Multi Org still exists in R12. If yes then what is purpose of the same.
Thanks in advance
Regards
-Mahesh

Anybody who hav Noticed the differences in Multi Org tables and Views in Database Level b/w ii1 and R12 plz answer this.
Regards
-Mahesh

Similar Messages

List partitioning multi-org tables

Hi
I am doing list partitioning on receivables multi-org tables on org_id column. Running into a performance problem with multi org views. The multi-org views for receivables tables are defined like below with a nvl condition on org_id (partitioned column) in their where clause
create or replace ra_customer_trx
select select * from ra_customer_trx_all
WHERE NVL(ORG_ID,NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV ('CLIENT_INFO'),1,1), ' ', NULL, SUBSTRB(USERENV ('CLIENT_INFO'),1,10))),-99)) = NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV ('CLIENT_INFO'),1,1), ' ', NULL, SUBSTRB(USERENV ('CLIENT_INFO'),1,10))),-99)
Queries against the view are doing all partition scan when I exptected partition pruning to kick in and the query goes only against the spefific partition.
select count(1) from ra_customer_trx ---- does all partition scan
select count(1) from ra_customer_trx_all where org_id = <> ---- does single partition scan, works well.
When I recreate the view with out any function calls on the org_id column partition pruning happens.
In a non partitioned environment which has an index on org_id column, both the above sqls use the index and yield same result.
So my questions are -
1. Is there a way to get around this problem without having to modify the oracle supplied multi-org views? Any options I can supply in the partition script?
2. In a non-partitioned env, with an index on org_id how is the optmizer able to go against the index and where as it is not able to in partitioned environment..? Both these envs has the same view definition with NVL(org.......) consition.
Does anyone have any suggestions?
Thank you.

user2317378 wrote:
1. Is there a way to get around this problem without having to modify the oracle supplied multi-org views? Any options I can supply in the partition script?You mean to say that the expression used in the view belongs to some Oracle supplied schema, like APPS? Or is this a view you've created yourself?
Can you show us the output of EXPLAIN PLAN using DBMS_XPLAN.DISPLAY when querying the view? Use the \ tag before and after to use proper formatting in fixed font.
Please make sure that the "Predicate Information" section below the plan is also included in your post. If it is missing your plan table is old and needs to be upgraded using $ORACLE_HOME/rdbms/admin/utlxplan.sql or dropped if you're in 10g which provides a system wide PLAN_TABLE.
2. In a non-partitioned env, with an index on org_id how is the optmizer able to go against the index and where as it is not able to in partitioned environment..? Both these envs has the same view definition with NVL(org.......) consition.
These are two different questions. One is about partition pruning not taking place, the other one about an index not being used.
Can you show us the output of EXPLAIN PLAN using DBMS_XPLAN.DISPLAY when querying the unpartitioned example? Use the \ tag before and after to use proper formatting in fixed font.
Please make sure that the "Predicate Information" section below the plan is also included in your post. If it is missing your plan table is old and needs to be upgraded using $ORACLE_HOME/rdbms/admin/utlxplan.sql or dropped if you're in 10g which provides a system wide PLAN_TABLE.
It would be interesting to know how Oracle can use the index given the complex expression in the WHERE clause.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Multi layer table view/navigation controller hierarchy best practice

Hi,
I am new to iPad/iPhone development and wondering what the best practice for multiple layers of table views is? I understand the principle of a navigation controller providing the framework for moving up and down a list but have not yet quite got my head around if you should have one navigation controller for the whole tree or several navigation controllers.
In my app I need to have the following:
Main view -> window view showing some interactive elements (picker, buttons etc.)
Setup view -> Hierarchy managed by nav controller/table views
The setup view needs to manage the following hierarchy...
- Level A:
- Global app variables (one table view)
- Level B Items (table view showing list of items at belonging to Level B)
- Level B Item 1 (table view showing list of items at level C belonging to level B item 1)
- Level C Item 1 (table view showing list of items at level D belonging to level C item 1)
- Level D Item 1 (table view showing list of items at level E belonging to level D item 1)
- Level E item (table view for properties of item at Level E)
- Level D Item n
- Level C Item n
- Level B Item n
Each level in this has some properties and then a list of child items.
What would be the best way of structuring this? I would assume that creating a class that extends a view controller for each level is a given but what about the control of the navigation? Should this be handled by one navigation controller or one per level? I think I know the right answer but have not seen a neat way of implementing
I think I am also best off having each level in it's own xib but, once again, am not 100% sure that this is the best design pattern.
Many thanks in advance for any help/pointers!
Cheers
jez

Hi Julian,
I have struggled with the same questions you are addressing. On a previous project we tried to model based on packages, but during the course of the project we encountered some problems that grew overtime. The main problems were:
1. It is hard to enforce rules on package assignments
2. With multiple developers on the project and limited time we didn't have time to review package assignment
3. Devopelers would click away warnings that an object was already part of another project and just continue
4. After go-live the maintenance partner didn't care.
So, my experience is is that it is a nice feature, but only from a high level design point of view. In real life it will get messy and above all, it doesn't add much value to the development. On my neew assignment we are just working with packages based on functional area and that works just fine.
Roy

Multi Org Reports

I am developing reports in Developer 2000, Reports 2.5 that are implemented in Oracle Financials. We have moved to a Multi Org environment, as a result I can no longer see any data in reports that use views. What steps need to be taken to correct this. This is of high priority. Thanks in advance for your help.
null

Oracle Financials requires the user environment to be set.
Add the following calls into the Before & After report triggers.
Before Report Trigger
SRW.USER_EXIT('FND SRWINIT');
After Report Trigger
SRW.USER_EXIT('FND SRWEXIT');
Also all select statements should use the multi org tables (_ALL) eg po_headers_all.

Multi-Org Setup

Hi,
I am having task to upgrade 11.5.10 to R12, but Multi-Org setup is mandatory for upgrade to R12.
Can you guy provide me the document where I can find patches to be applied for Multi-Org Setup.
Regards,
Raj

I am having task to upgrade 11.5.10 to R12, but Multi-Org setup is mandatory for upgrade to R12.
Can you guy provide me the document where I can find patches to be applied for Multi-Org Setup.This question was asked and answered many times in the forum before, please see old threads for the links you need to refer to.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Multi-Org++AND+Setup&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Multi-Org++AND+Setup+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Multi-Org++AND+Setup+AND+Upgrade&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Reports 2.5 / Multi Org?

A Partner asked the following question:
"I have been designing custom reports for a client using Reports 2.5 which are then implemented in Oracle Financials. The client has now moved to a Multi Org environment. What do I need to do to my reports to get them working with Multi Org?"
This does not sound like a Reports question, per se. Does anybody have experience with this and can offer suggestions? Thanks.

Oracle Financials requires the user environment to be set.
Add the following calls into the Before & After report triggers.
Before Report Trigger
SRW.USER_EXIT('FND SRWINIT');
After Report Trigger
SRW.USER_EXIT('FND SRWEXIT');
Also all select statements should use the multi org tables (_ALL) eg po_headers_all.

Custom code for Multi-org - Use x_all tables or views with set_client_info?

Trying to determine what is normal for custom sql and plsql within 11i. I am trying to find out what other 11i installations are using in regards to custom code. Are you using the all tables or using the views utilizing setclient_info. Any feedback would be appreciated.
Note: We have converted to multi-org and are setup as a single organization.
Thanks, Ira

Hi,
Using views or table are depend upon the requirement of clinets and implementation.
If one need to access multiple tables, its always good to have a view and access that... else its same to access view or table...
Thanks
Yogi

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

ESYU: R12 - Order Management를 위한 Multi Org Access Control(MOAC) setup 방법

Purpose
Oracle Order Management - Version: 12.0 to 12.0
Information in this document applies to any platform.
R12의 Order Management에 대핸 Multi Org Access Control(MOAC) setup 방법에 대해 알아본다.
Solution
일반적인 MOAC Setup:
1. HRMS에서 Security Profile을 정의:
a. HRMS Management responsibility 선택
b. HRMS Manager> Security> Profile로 이동
c. Security Profile이 정의되어 있는지 확인 (OM responsibility 혹은 Site level로)
d. 만일 아직 setup 되어져 있지 않다면 Operating Units를 입력
e. 저장
Note: 만일 위 d step과 같이 새로운 security profile을 생성하였다면 concurrent program 'Security List Maintenance'를 꼭 실행해야 한다.
그렇지 않으면 multiple operating units가 OM forms의 LOV에 나타나지 않을 것이다.
이 program은 multi-org access를 validating 하기 위해 사용하는 table에 data를 생성한다.
Navigation: HRMS Management> HRMS Manager> Processes & Reports> Submit Process & Report> Security List Maintenance
2. MO Profile Options setup:
a. MO: Security Profile - 이 profile setting은 MOAC functionality를 활성화 한다.
b. MO: Default Operating Unit - 이 Operating Unit는 OM forms과 report에서 default가 될 것이며, 이를 clear 하거나 변경하기 위해 LOV를 사용할 수 있다.
Keep the MO profiles in sync:
MO: Security Profile은 site와 responsibility level로 setting 할 수 있다.
MO: Default Operating Unit은 site, responsibility, user level로 setting 할 수 있다.
Application이 원하는대로 동작되지 않는것을 발견하면 이 profile options의 setting 값을 확인한다.
3. OM setup:
R12 upgrade 시 OM Profile에서 migrate 된 새로운 OM System Parameters를 확인:
Order Management Super User> Setup> System Parameters> Values
(See <<NOTE 393646.1>>-R12 Readiness Cheat Sheet: Migrated OM Profile Options)
4. Form에서 hidden field 'Operatin Unit'를 활성화시키고 default folder로 저장:
Sales Order and Order Organizer forms
Quick Sales order and Organizer forms
Sales Agreement forms
Pricing and Availability form
Other forms
Note: Sales Order form에서 hidden field 'Operating Unit'를 'Show' 하기 전에 fotm안에 이 field를 위한 공간을 만들어 놓아야 한다.
예를 들면 Customer Number field를 짧게 하거나 Operating Unit field로 이 field를 덮어씌울수 있다.
Reference
Note 393634.1

Hi Larry,
Have you considered adding the exec apps.mo_global.set_policy_context call to your connection's start-up script?
Tools -> Preferences -> Database -> Filename for connection startup scriptNot the most flexible approach, so I'm not sure if it is appropriate for your application, but just a thought. You might create distinct connection names with different start-up scripts for each org_id.
Regards,
Gary
SQL Developer Team

GL_SET_OF_BKS_ID in R12 Multi-Org Form

Hi,
I am migrating a 11i form into R12. In R12 it will be a Multi-Org form. For that I have created operating unit items for selecting operating unit.
I am using MO_GLOBAL.set_policy_context to set selected operating unit context.
I have 2 profiles being used in my form i.e. ORG_ID and GL_SET_OF_BKS_ID.
After doing all this exercise mentioned above, ORG_ID value is being retrieved correctly using FND_PROFILE.VALUE but still value of GL_SET_OF_BKS_ID is blank.
Is there any option available to set this profile value other than FND_PROFILE.put like MO_GLOBAL set ORG_ID value.
Regards,

For question 1:
Changing set_of_books_id to ledger_id in subledgers may be a very bit hit in datamodel changes.
I think they have changed that in SLA / GL, as Accounting Convention (4th C) has been added to SOB.
http://realworldoracleapps.blogspot.com/2009/02/r12-financials-overview-and-new.html
For question 2:
Yes, set_of_books_id and ledger_id are one and the same. SLA will take care of the mapping.
You may check the link http://www.orafaq.com/node/2242
By
Vamsi

Create one plan element for multi org in OIC R12

Hi There,
Can I create one plan element and use this plan element for 2 orgs, like US and CANADA?
In EBS R115, I have to create more than 100 plan elements in each org.
I want to know in R12 if i still need to do this. If I can create one set plan elements for multi orgs, will save a lot of time. The only difference of org US and CANADA is currency.
Thanks a lot !

It is same in R12 also. You need to do the same as what you did in 11i. Not much changes on plan definition side.

R12 limit the user privilage under multi-org situation

Hi
In R12, users needn't change the repsonsibilty to achieve the same transaction for multi-org.i.e. u can do the ou1,ou2....under the same AP responsibility.
while if i want to limit users privilage under this situation, user1 is just limited to the ou1, user2 is just limited to the ou2....how can i relaize it?
Any help will be preciated.
Regards,
Chelsea

you can achieve this easily...I would suggest go through Documentation atleast once. This Subject is very new.
Here is one senario how can it acheive for AP Invoice Entry
Responsibility: Payables
Navigation: Invoices:Entry > Invoices
On the Invoice Workbench, you can select an Operating Unit, or enter another field, such as PO or Supplier Site, from which the system will default an OU. Your list of available OUs is determined by your multi-org security profile defined in Oracle HR and associated to their responsibility through the MO Security Profile profile option.
How it works....once the application automatically provides the operating unit of new (uncommitted) invoices during entry. The following are methods by which the operating unit is derived:
1)Default Operating Unit from “MO: Default Operating Unit” Profile Option
2)Default Operating Unit from Invoice Batch Header
>>When entering invoice batches, users have the option of establishing a default operating unit for the invoices entered in the batch. This can be overridden at the invoice level as with any other value (Payment Method, for example) entered in the Invoice Batches window.
3)Derive Operating Unit from Transaction Attributes
>>>Oracle Payables will derive the operating unit of an invoice based on certain user entered attributes. If the user chooses a PO (via PO Default or QuickMatch features) or supplier site when the Operating Unit field is empty, the Operating Unit corresponding to the selected value will be populated onto the invoice.
4) Set Operating Unit from Single Operating Unit Security Profile
>>>>> That mean when a user’s security profile contains only one operating unit, it can be said that the user’s operating unit context has been “set” to this operating unit. This value is automatically defaulted to all new invoices and it cannot be overridden.
Hope this make sense.
same is true for other activity like payment , period close.Let me know , in case if you are not clear.
thanks

About Multi-ORG for EBS R12.1.1 .. Oracle error -20001 ORA-20001 APP-FND-02

I have two questions:
1. If I have only single organization, Do I need to set up multi-org? We will be using AR, AP, and GL modules only.
2. Is there any step-by-step process to set up multi-org?
I am getting error: "Oracle error -20001 ORA-20001 APP-FND-02901. You do not have access to any operating unit. Please check if your profile option MO:Security Profile includes any operating unit or the profile option MO: operating unit is set has been detected in MO_GLOBAL_INIT" when I access any form for Entry.
Thanks

1. If I have only single organization, Do I need to set up multi-org? We will be using AR, AP, and GL modules only.Yes.
2. Is there any step-by-step process to set up multi-org?https://forums.oracle.com/forums/search.jspa?threadID=&q=MultiOrg&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
I am getting error: "Oracle error -20001 ORA-20001 APP-FND-02901. You do not have access to any operating unit. Please check if your profile option MO:Security Profile includes any operating unit or the profile option MO: operating unit is set has been detected in MO_GLOBAL_INIT" when I access any form for Entry.Does this happen to all responsibilities?
Please see the steps in (ORA-20001: APP-FND-02901 Errors Encountered When "Requests" Tab is Selected from PFT or EPF [ID 859072.1]) to set the profile option at the responsibility level for the responsibility you are trying to access.
Thanks,
Hussein

Table View MULTI SELECT option and Event handling problems

Hello All,
I am facing problem while giving miltselect option in a table view. When i mention multiselect attribute in Select option in table view, i am unable to select all the rows which i want to select,because i have an event onRowSelection event activated so when i select a row then it will automatically go to the event and i am unable to do multiple select.
Can you guys pl tell me is there any way thtat i can put check boxes in a table column and by that i can get values of row seelct and can perform my subsequent SQL operation.
Also i am not able to navigate in table view through BYPAGE or BYLINE option. When I click on navigate button then page got refreshed and i lost data.
One more query guys , can you pl tell me how can i store my internal table values from one event for the another event. I have used EXport/Import but internal table values get refreshed as page got refreshed on event switching/selection.
Please respond.

hye rahul.
as i told you my second solution, will help you . the values remain in the corresponding UI elements.
For example , you have a drop down and table view. both will trigger events. bind the data of the table at drop down event and bind the dat of the drop down at table event.
event = cl_htmlb_manager=>get_event( runtime->server->request ).
CASE event->id.
when 'dd1'.                   drop down event is fired.
bind data for drop down
dd ?= cl_htmlb_manager=>get_data(
                                      request = runtime->server->request
                                      name    = 'dropdown'
                                      id      = dd_id'           " name of the drop down id
along with drop down bind data for table view
    tbv ?= cl_htmlb_manager=>get_data(
                                      request = runtime->server->request
                                      name    = 'tableView'
                                      id      = 'tbv_id'           " name of the table view
when 'tbv_id'.                   drop down event is fired.
bind data for drop down
dd ?= cl_htmlb_manager=>get_data(
                                      request = runtime->server->request
                                      name    = 'dropdown'
                                      id      = dd_id'           " name of the drop down id
along with drop down bind data for table view
    tbv ?= cl_htmlb_manager=>get_data(
                                      request = runtime->server->request
                                      name    = 'tableView'
                                      id      = 'tbv_id'           " name of the table view
This is how data should be binded in case of Stateless application. All the UI elemets must b binded again.. as the global data is refresed again.
Hope this helps.
Regards,
Imran.

Apps 11i SET_CLIENT_INFO in Multi-Org environment

How do you set the client info (dbms_application_info.set_client_info) in a portal session so reports have access to correct Operations ORG data in a multi-org environment

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Multi-org Tables & Views in R12

Similar Messages

Maybe you are looking for