Multiple constraining classifiers in generic templates - compiler broken

can not compile multiple constraining classifiers to a generic template if the classifier is defined in the template:
     public <U, T extends U> void a() {}
will compile.
java language specification: 4.4 Type Variables says:
     public <T extends Object & Comparable<? super T> > void a() {}
will compile, but:
     public static <U, T extends U & Comparable<? super T> > void a() {}
will not compile.
U is defined within the template but is only accepted as a constraining classifier to T if it is on its own. When the interface is added, the java compiler breaks.
(please ignore ">" as required.)
compile error message:
"a type variable may not be followed by other bounds"

thanks...You're wecome.
B.t.w. my guess it's not the compiler, though.+1
'select' isn't broken :-)I'll put that one in my bookmarks, next to The Ten Commandments
; )

Similar Messages

  • How do I select multiple songs and uncheck them from compilations (itunes 10.5.2)

    So I found to my annoinance that itunes has recently moved much of my music to compilations that shouldn't be there. I tried searching online for how to turn compilations off or select multiple songs and uncheck them from compilations all at once and although I found both answers, they must have only worked for older versions of itunes. I no longer can find the option to turn off compilations under preferences and when I try to select multiple songs at a time then press "Get Info" the "part of a compilation" checkmark is not there. It is only there when one song is highlighted. This is very frustrated. In fact I would venture to say I've never been so angry with Apple. There are 609 songs "stuck" in my freaking compilations! I don't have time nor should I have to take the time to go through every single song right clicking it, pressing "Get info", unchecking "part of compilation" then clicking ok. WAY TOO MUCH TIME! If anyone has any good news on a faster way to do this I'd be VERY THANKFUL!

    This was a life saver! I even started to manually tick the box as well!

  • WAD generic template

    IN BI 7
    I transport a generic template in QUALIT,  in SPRO==> Settings for Reporting and Analysis==>BEx Web==> Set Standard Web Templates
    I setted the ad hoc analysis with =ZANALYSIS_PARTTERN_XXXX which I created in DEV and transported in QUALIT
    then I luanched a query, the new generic template expected was not showed.
    then I manually changed  the URL  by  "QUERY=ZQ02&TEMPLATE=ZANALYSIS_PARTTERN_XXXX "
    the generic template was showed.
    I want the generic template to be generated automaticlly when we executed the query.
    Please who can tell me which step I miss in customizing or something else
    THANKKKKKKKKKKKKKKKKKKS

    Hi,
    Why not try the T.Code RSCUSTV27. Put in your Z* Template that you have created and set it as the Standard Web Template. After setting this, all the web templates will open up in that template.
    RSCUSTV21 will give you the present templates information.

  • Defaults template grayed out, getting generic template instead of custom

    Hi.
    Great forum!
    Suddenly, (after a Freehand crash) when I go to open a "New" Freehand document, the custom "Defaults Ltr" template I set up is gone, and I get a more generic template. When I try to select the "Defaults Ltr" template as my default in Preferences, it is grayed out, and if I try to recreate the old template, and save it as "Defaults Ltr", it won't let me do it. (Well, it does, but it is still grayed out if I try to reselect it in Preferences). I seem to recall fixing this by trashing some preference files once, a long time ago, but that didn't work this time.
    Freehand MX, Mac G4, 10.4.11

    I've answered my own question - with the help of Freehand Help.
    I needed to take the "Template" I saved, Get Info on it, and check the "stationery pad" box. All is well now.
    Strange that I never had to do this before, though.

  • Generic Templates for all customers

    Dear experst,
    can I use in the PI a generic template for different customers sending messages via PI.
    That means the sender is 1 : N customers.
    Please advice how we can do it.

    hi,
    That depends on what it's a "generic" for you and what is exaclty your flow: which receiver adapter ?
    but yes you can do it in by adding several receivers in the Receiver Determination... if the receiver CC should be different... that means if receiver folder / filename should be differents (for instance, if it's a file adapter). Always in Receiver Determination you can define a condition for the routing to different receiver, else every time ALL receivers will receive the info.
    regards
    Mickael

  • AcroForm FDF Template functionality broken by updates

    We have many cases where we build an FDF file that went sent to the browser causes a PDF to be assembled (and form fields filled in) from multiple PDFs containing acroForm templates.  Each time an Acrobat patch is applied by my company, this functionality is broken.  While broken, the PDF is still assembled but all of the form fields are blank.  FDFs that do not rely on templates and simply fill in a standard acroForm work fine.  Also, the template based PDF technology still works if loaded into Acrobat OUTSIDE the browser, it is only broken in the browser.  This tells me that the FDF is constructed correctly.
    To fix the problem we must run a repair from within Acrobat on each client machine to restore the functionality.  However, version 9.3.4 appears to be the nail in the coffin and a repair will no longer fix the problem.
    Has Adobe dropped support for this functionality?  I know this is the 'old' way of doing things but it will be a massive task to update all of our forms.

    Was this issue ever resolved?
    I see similar behaviour with an FDF I hand crank.
    On my XP machine with Adobe Reader 9.4, the PDF opens empty.
    On my other XP machine (also on a Vista box  and a Windows 7 box) with Adobe Reader 9.0, everything is good to go.
    Is there a 'patch' available for 9.4?
    Or am I missing something here?
    Any ideas?
    Thanks,
    .......Cameron

  • Multiple users using the same templates?

    The place I work puts out a weekly TV show and we regularly use the same lower thirds for various titles that come up throughout the show. After opening them up in Motion 3 I saved the titles as templates, which is great because now I can do all the work in FCP rather than Motion.
    However, the templates are saved to my user on the local HD. We have multiple editors that work on multiple computers.
    Is there a way to make the templates available on all computers to all users?
    Any suggestions is appreciated.
    jesse.

    Too, here's one more roadblock to (hypothetically) consider.
    Even if what we've discussed happened to work, there would be one more issue: network bandwidth. When you add one of these "Master Templates" to a FCP timeline, then drag it to the browser, then right-click and select "Reveal in Finder", it points straight to the Templates folder that I alluded to earlier. Locally.
    So if this template lived in one central place then, potentially, all editors could be trying to access it, in real-time, remotely, simultaneously. I think this would wreak havoc quickly. Unless of course you're employing a SAN. Now we're talking about a whole new beast. (Unless you've got a SAN already. ;))
    Bottom line is you're going to distribute templates to all editors individually. Unless you're developing new templates all the time, then this shouldn't be too much of a chore. Just out of curiosity, how many editors will this be deployed to?

  • Unable to create a subsite based on the generic template - save site as a template

    hi,
    am using a  save site as a template functionality to create a sub site. when i select the custom template, and click on ok button,am  getting server error in appln.
    in the site template i have
    1) 2 document libraries with permissions broken[ stop inheritance]
    2) 4  Groups created L1, L2,L3,L4
    am stuck with ,  how to proceed/  create a  subsite based on the  template  site
    note i have uploaded the  wsp file in the new site collection and activated it . ma getting the custom site template name in the tab.
    would like to get clarification  about the  custom permissions:
    if i break the permissions on the document libraries, will this sec.permissions be intact, [ not changed] as the orginal ? i mean if i broke the permissions, in the newly created subsite also, will the permissions be broken? i need this broken functionality
    as per my requirement.
    help is  highly appreciated!
    Das

    hi,
     am not bale to get the correlation id. am getting server error in application. yellow page error!!
    and regarding the permissions i have checked this blog
    http://sergeluca.wordpress.com/2011/06/02/sharepoint-2010-save-as-template-what-is-saved-what-is-not-saved/
    Serge says that, if i am not wrong,
    we cant perform stop inherit the permissions  for the doc lib and create a  sub site based on this site template.
    also if i  stop inheriting from site permissions  also.
    can anyone from MSFT, pls confirm this. or any msd doc says about this.
    Das

  • Set multiple values in a web template via JavaScript

    Hi,
    I have a web template displaying a query containing a mandatory variable. Multiple values are allowed for the variable.
    By manually inserting a link in the template I succeeded in setting a single value for the variable with JavaScript, but how is it possible to pass multiple values for that variable?
    So far my link target looks like this:
    "sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&
    TEMPLATE_ID=ZJS_WT_1&VAR_NAME_1=ZJS_V_R&VAR_VALUE_EXT_1=1"
    How do I have to modify the line?
    Cheers,
    Jost

    Jost -
    I haven't tried this yet...but I suspect it could work. In the below example, I have a variable on Company Code and am setting it equal to 3 different values. Give it a shot.
    &CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT
    &VAR_ID_1=ZCCMPCOD0001
    &VAR_ID_2=ZCCMPCOD0001
    &VAR_ID_3=ZCCMPCOD0001
    &VAR_OPERATOR_1=EQ
    &VAR_VALUE_LOW_EXT_1=IP01
    &VAR_VALUE_HIGH_EXT_1=
    &VAR_SIGN_1=I
    &VAR_OPERATOR_2=EQ
    &VAR_VALUE_LOW_EXT_2=IP05
    &VAR_VALUE_HIGH_EXT_2=
    &VAR_SIGN_2=I
    &VAR_OPERATOR_3=EQ
    &VAR_VALUE_LOW_EXT_3=IP50
    &VAR_VALUE_HIGH_EXT_3=
    &VAR_SIGN_3=I

  • Multiple compnay codes--Blue print template

    Hi Guys,
    I need a Business Blue Print Template with Multiple Company codes,for Reference.Please send the documet to [email protected]
    thanks in advance and points will be assigned..
    suresh

    Hi Suresh,
    When you create a G/L account it is possible to fill in the field  Alternative account number (see the help).
    When you want you can assign this to the countries own chart of account and report on this.
    In this case I advise you to use one chart of accounts and use Alternative account number for reporting by country.
    Now it is possible to use one controling area. This is use-full when you want to make total reports over the company codes.
    In controlling you store document currency, company currency and controlling area currency. It is possible to use paralel currencies.
    When you are doing settlement to an other companie code's it will create an inter company posting. But it is possible with the exchange rates that you have results you don't want
    Paul
    Alternative account number in company code
    The alternative account number field in the company code area is freely definable. You could use it to enter:
    the account number from your legacy system or
    the account number from a country chart of accounts if your corporate group uses a standard chart of accounts.
    The alternative account number is only issued in the financial statement if you explicitly assign it to the relevant items in the financial statement version.

  • Allocation of multiple expenses in single posting template

    Hi
    With reference to Message 843069, we would like to suggest improvement to enable multiple allocation of expenses to respective departmental segments using a single Posting Template when each expense is allocated in various proportions of 100% among its Departments.
    Example
    Allocation of Stationery expense (1000 00) to its Department (1000 01) 1
    and (1000 02) 2 at 50% each and allocation of Postage expense (2000 00)
    to its Department (2000 01) 1 at 60% and (2000 02) 2 at 40%.
    We need these allocations to be saved in a single Posting Template to
    create a single Journal Entry at one goal.
    Kedalene Chong

    If you are using multiple queries then how are you designing the final web template, I meant are you doing data binding for queries with web tempaltes and then insert all the templates in to a main template?
    or are you just using multiple table web items and using a single template for all the queries?
    If you have Javascript then try using multiple templates for multiple queries and write the javascript for the related template and then put all in a main template.

  • Template compiler error!

    Hi Igor and everyone.
    The following line causes a compiler error with my VS2012.
    Can somebody explain to me why please.:
    template< template<typename, typename> class BP, typename T1, typename A,
    typename... Args >
    struct are_all< BP, T1, A, Args... >
        static const bool value = are_all<BP, T1, A>::value && are_all<BP, T1,
                                  Args...>::value;
    1>atest.cpp(8): error C2143: syntax error : missing ',' before '...'
    1>atest.cpp(9): error C2143: syntax error : missing ';' before '<'
    1>atest.cpp(9): error C2059: syntax error : '<'
    1>atest.cpp(10): error C2143: syntax error : missing ';' before '{'
    1>atest.cpp(10): error C2447: '{' : missing function header (old-style formal list?)
    Regards
    Chong

    On 2/10/2015 9:28 AM, "chong kyong kim" wrote:
    The following line causes a compiler error with my VS2012.
    VS2012 doesn't support variadic templates.
    Igor Tandetnik

  • Template compilation error

    I am getting compilation error on following peice of code:
    template <typename KEY>
    class XYZ
    private:
        map<KEY,int>  m_Map;     
        typedef map<KEY,int>::iterator it;
    }Error: No parameters provided for template.
    I have CC version Sun C++ 5.5

    Following code is compiled successfully. I added 'typename' keyword. Without this keyword compiler shows warning but produces correct code. Have you installed the latest patch for your compiler?
    % cat test.cc
    #include <map>
    using namespace std;
    template <typename KEY>
    class XYZ
    private:
    map<KEY,int> m_Map;
    typedef typename map<KEY,int>::iterator it;
    XYZ<int> s;
    % CC -V -c test.cc
    CC: Sun C++ 5.5 Patch 113817-19 2006/10/13
    ccfe: Sun C++ 5.5 Patch 113817-19 2006/10/13

  • Foreach syntax + generics, Possible compiler bug?

    I'm encountering an odd problem trying to use generics and the foreach (colon) syntax. The code in question:
    for (Iterator<String> it = col.getParameterNames().iterator(); it.hasNext();) {}
    for (String paramName : col.getParameterNames()) {}col is an instance of an inner class of the class whose method this code snippet is from, getParameterNames has the signature:
    public Set<String> getParameterNames();
    The first line, using the Iterator<String> explicitly, compiles fine. The second line, when present, raises the compiler error:
    found : java.lang.Object
    required: java.lang.String
    for (String paramName : col.getParameterNames()) {
    I cannot seem to reliably reproduce this situation in other (simpler) classes I write, but this one in particular seems to trigger it. Is it possible this is a compiler bug, or might there be something I'm doing incorrectly that I'm missing? Are my expectations about how the second line should work incorrect? It seems to in other circumstances...
    javac is 1.6.0_01. Any ideas?

    Here is a quick update, I'm more inclined to think of this as bad behavior now.
    This code compiles:
    public class Test {
    Vector<InnerTest> inners = new Vector<InnerTest>();
        public class InnerTest {        
           public Set<String> someSet() { return (new HashMap<String,String>()).keySet(); }
        public Test() {
            for (InnerTest it : inners) {
                for (String s : it.someSet()) {        
    }however, the following does not:
    public class Test {
    Vector<InnerTest> inners = new Vector<InnerTest>();
        public class InnerTest<P> {        
           public Set<String> someSet() { return (new HashMap<String,String>()).keySet(); }
        public Test() {
            for (InnerTest it : inners) {
                for (String s : it.someSet()) {        
    }Again, the problem might be with my expectations (I haven't gone through the specifications yet with this in mind), but I can't fathom how or why the unused parameter would make a difference in that method's tpye matching.

  • Multiple Filters in a Generic ldap Search.

    Hi all,
    'am involved in developing a generic ldap search utility. I would like to know if there is a provision to give multiple filters while searching the LDAP.
    The scenario is like this,
    like if i give the search criteria as java ldapSearch "empid=111*" I will get a series of results.
    WHAT I WANT:
    Will i be able to specify something like empid=11* and lastname=xxx*.
    Any pointers on this would be of tremendous help.
    Anticipating a reply.
    Regards,
    Sathya Sayee.S

    You can use | as 'or condition'. For example the condition
    sn=foo and (email=[email protected] or email=[email protected])
    (&(sn=foo) (|(email=[email protected]) (email=[email protected]))
    the operator are :
    AND : &
    OR : |
    NOT : !
    the notation works as HP calculator notation
    Simon Pierre NOLIN

Maybe you are looking for

  • DVD drive problem or dodgy disk?

    Hi all, I am currently trying to install a program (Logic Studio) on to my iMac.  The first install disk works fine but the installation fails on the second disk with an error in the log basically saying "an error occurred while extracting files from

  • Problem rendering -- only part of the comp gets rendered

    I'm puzzled as to why our comps are only getting the first part rendered. then it stops and the rest looks like a still image. could this be a memory issue? We're using IMacs with Tiger. Thank you!

  • 'DVD or CD sharing' isn't possible. HELP!

    Okay so i got a MacBook air on the 27th December I have done ALL the updates available, I now want to setup DVD or CD sharing however this is not an option when I go on 'system preferences', 'Sharing'. Help I have already like read all the forums and

  • How to delete the horiz line of addresses beneath the address bar

    How to delete the horiz line of addresses beneath the address window. They are not affected by the "delete recent sites" tool.

  • Will Match sync higher bit rate songs to an iPod Nano?

    Hi, well I was just wondring whether my music would be updated to the 256kbps bit rate on my fith gen Nano if I did decide to upgrade to iTunes match. It'd be a pointless upgrade for me if it didn't since I don't have an iPhone or a Touch and I can't