Multiple Headphone Jack Adapter?

Does anybody know if there is some adapter I can buy somewhere on the internet (if so on eBay?), that lets you plug it into the headphone jack of the iPod, and then it has more than one (maybe 3) headphone jacks, so more than one person can listen to a movie. Also does anybody know what this is called?

Monster iSplitter for iPod in the Apple store split into 2. Guess you will have to buy 2 if you need to split in 3.

Similar Messages

Headphone tip stuck in headphone jack no sound comes out or goes in, what should i do?

i just got my macbook pro unibody, and first time i insert headphone in the jack the little piece of the head phone gets stuck in the jack. what should i do ? Does the warranty cover that kind of stuff( cause i think they should) or is there a solution? anything, please help!!

I had the same problem. I tried tweezers, glue and neither worked. If you can, bring it into the Apple Store.
Otherwise, a cheap fix so you can use headphones/earbuds:
I bought a USB to headphone jack adapter and it worked well. This is the one I got:
Syba SD-CM-UAUD USB Stereo Audio Adapter
http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o01_s00_i00?ie=UTF8&p sc=1
I'm sure many other similar adapters would work too.
It didn't require any device drivers, it was plug and play.
Once you plug it in, go to System Preferences, Sound, and click the Output tab at the top of the dialog box. Then select: C-media USB audio device
Your headphones should work now, but I think your internal speakers will remain inaccessible until you get your MacBook repaired.

How do i get the sound to turn back onto my macbook? There's an unremovable headphone jack stuck inside the jack hole

A piece of a headphone jack broke off inside my macbook, and i am unable to remove it. Since it is still in the laptop, my laptop is unable to play music from the internal speakers, is there anyway i can override this and get the speakers to work without removing the jack?

Get a USB headset or a USB to headphone jack adapter.

Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

Hey everyone,
I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air).
I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
I can't do that. I tried.
Please help!
Thank you.

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

I asked same question
Any answers

Using Headphone Jack with Multiple Displays with Mavericks

I recently installed Mavericks on a 2011 Mac Mini (previously was running 10.6.8); the Mac Mini is connected via HDMI to my HDTV in my living room and connected via mini display to HDMI to a second HDTV in my basement. I am running an extended USB cable to the basement to have a keyboard/mouse at each HDTV (living room is using a Bluetooth keyboard/trackpad).
After I installed Mavericks, I was immediatley having problems with my monitors. Each monitor showed up in my audio settings, but for some reason, I could not select the living room HDTV for sound, it just bounced off the HDTV name and went to another selection. After analyzing it for a while, I determined that when I had a line into my headphone jack, I could not select that living room monitor. As soon as I removed that line, I could select it (as an fyi, the other HDTV in the basement worked fine for sound with the headphone jack being used). I would prefer to be able to use the headphone jack as I have that plugged into my home theater system to play sound through my sound system.
Also, whenever I reboot my Mac Mini, my extended cable USB keyboard/mouse becomes unusuable and I have to unplug the keyboard & mouse and plug them back in for them to work and recognize the keyboard/mouse. The USB maintains power as I plugged my iPhone into it and got a charge after a reboot of my Mac Mini, it just doesn't automatically pickup the keyboard/mouse. Everything worked perfectly in 10.6.8, so any solution(s) would be welcomed so I don't have to go back to that OS.
Thanks.

Actually, there is an adapter that will do exactly what you want:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=6B2 FAAD2&fnode=home/shopiphone/iphoneaccessories/headsets&nplm=TN544LL/A
If you read one guy's experience, he says:
"I can even use it to connect to the auxiliary jack of my car stereo so the call goes through the car speakers and I use the adapter's microphone to speak. "
So this ought to do ya. (And, of course, the iPhone music will indeed pause when the call comes in -- this happens even if you are using "normal" headphones).

Iphone4s headphone jack broken, is there an adapter to listen to music through charger port?

My IPhone 4S headphone jack no longer works. It's one month out of warranty. It's the second phone that this has happened with. Is there an adapter available to let me use charger jack to listen to music?

all these would work
http://www.amazon.com/iDRIVE-ADAPTER-MASERATI-61120440796-61120440812/dp/B003P6D GMK/ref=pd_sim_cps_18
http://store.apple.com/au/product/MC748ZM/A/apple-composite-av-cable?fnode=45
http://store.apple.com/au/product/MC596ZM/B/apple-iphone-4-dock?fnode=45

My ipod headphone jack is only allowing sound in one headphone. i tried multiple headphones to make sure it wasn't the headphone but the jack itself. i have a ipod video 5th generation.

My ipod headphone jack is only allowing sound in one headphone. i tried multiple headphones to make sure it wasn't the headphone but the jack itself. i have a ipod video 5th generation.

Had you brought the same pair of headphones to the Apple Store with you and they worked there? If you hadn't, the wire or plug on those headphones may have failed. Try a different pair if you can and see if those work.
Hope this helps

Pantech Jest 2 Headphone Jack

I will never understand why the last few phones I have purchased come with a 2.5mm headphone jack rather than a standard 3.5mm, but.....the Pantech Jest 2 is among them.
I have never bothered to try to connect them before because I could never find a set of headphones that would fit the jack. I recently found an adapter (from 2.5mm to 3.5mm) at Radio Shack and bought 2 so that I could finally use my phones as mp3 players. The problem is, I have tried both adapters on 2 different Jest 2s, also tried hooking the phone up to regular headphones and also mp3 speakers, and the sound still comes through the cell phone rather than the audio line out.
Is there a setting in the phone that I am overlooking or something? I have read the manual and there is literally no reference to this or any other issue related to the headphone jack other than that it exists. Searching turns up other people asking the same question but none have been answered. Anyone have any ideas?

Yes...I had done the same when I went to Radio Shack, showed them my phone and explained what I needed. I actually bought 2 because I have multiple Jests, and tried them both. Not sure why they don't work. It is simple hardware and shouldn't be dependent on models, etc.
I went in to Target yesterday and found a "headset" package that is made specifically for cell phones and my model was listed, a 2.5mm adapter was included. I bought 2 of these @ $21 each. These DO work and I was even able to use a standard audio cable to connect it to mp3 speakers and my car stereo. However, I am extremely disappointed in the performance of these phones. When you play the music through the phones speakers, it sounds normal. But once passed through the jack-which is only capable of mono and not stereo-it sounds terrible.
Frankly I don't know why they bothered to make this phone an mp3 player. It can't be plugged into any headphones or audio devices and sound as was intended. Really, MONO?

Headphone Jack No Longer Works

Does anyone know of headphones that may plug into the bottom outlet of the iPod, where it connects usually to stereo equipment. My iPod still works with this connection, to charge it, to listen on my computer, on my stereo but the headphone jack no longer works so I can't use it in my car or at other times.

Ok I just talked to headroom and with this adapter you can go directly to a set of headphones or to one of their amps. Additionally the pin connector provides improved sound quality over the cheap headphone jack that comes stock on the ipod.
http://tinyurl.com/272myv

How to make my computer send all the audio through optical audio cable instead of headphone jack?

Howdy,
To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
Thanks in advance!
My desktop is:
ENVY h8xt,
• Windows 8 64
• 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
• 12GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB 7200 rpm SATA hard drive
• No secondary hard drive
• 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
• 300W Power supply
• SuperMulti DVD Burner
• Wireless-N LAN card (1x1)
• 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
• No Additional Office Software
• No additional Security Software
• No TV Tuner
• Beats Audio (tm) -- integrated studio quality sound
• HP USB volume control keyboard and mouse with Win 8 keyboard
• Adobe Premiere Elements & Photoshop Elements 10
And the laptop:
HP ENVY 15t Quad
• Windows 8.1 64
• 4th generation Intel(R) Core(TM) i7-4700MQ Processor
• NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
• 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
• 8GB DDR3 System Memory (1 Dimm)
• 1TB 5400 rpm Hard Drive
• 24GB flash Hard Drive Acceleration Cache
• No Additional Office Software
• Security Software Trial
• 6-Cell Lithium-Ion Battery
• No Internal DVD or CD Drive
• Standard Keyboard
• HP TrueVision HD Webcam w/ integrated digital mic
• 802.11 AC WLAN and Bluetooth(R) [2x2]
This question was solved.
View Solution.

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My iPhone 5 is suddenly having audio issues through the headphone jack.

So this is a strange situation, and I'll try to explain in depth so that someone might be able to suggest a solution. As reference, I have an iPhone 5 that I purchased in late-February. I've had every other model of iPhone except for the first iPhone, so I am pretty familiar with the device. I used to be on AT&T, and switched to Verizon when I upgraded to the iPhone 5.
Two days ago, I was on a six hour road-trip, and I'd been playing my music like normal through my car's auxillary cable. After stopping for lunch, I went to plug my music again, but once the music started to play, I realized that only the drums were playing at normal levels while the vocals were very, very soft. I switched through a few different songs, and realized that all the songs were being played at different levels; sometimes the backup vocals were normal levels while the instrumentation and lead vocals were quiet, or vice versa. I decided to plug my iPhone in to charge, and when I did this, the audio levels were all normal. However, the iPhone was NOT charging. I removed the charger, and the audio went back to being weak and distorted. I went back and forth at this for a bit, trying to figure out what was going on.
Since then and after some testing, I realize that my iPhone will now only charge anywhere EXCEPT in the car charger (I simply use my USB cable that came with my iPhone and plug it into the power adapter I have in the car). This morning, I tested the audio in my home speaker system, and I had the same audio issues. Only half the song's tracks would be at normal audio levels, while the other half would be at a very quiet, almost nonexistent level. I tried plugging my charger into the phone to see if that'd make a difference, but instead of the audio going back to normal like it does in the car, the music stopped and there was just crackling and very noisy distortion sounds.
I'm super confused and not sure what to do. This has never happened to me with any of my iPhones. I am updating my software right now, and am hoping that that may help somehow. Otherwise, I'm at a loss. Any suggestions as to what I should do would be greatly appreciated!

Do the new iMacs have digital audio out through the headphone jack?
Yes.
http://support.apple.com/kb/SP576

IPOD touch. - Headphone jack no longer working.

I'm new to this site, and it's sincerely making me angry.
I got an ipod touch NG december 2008. It ran fine, but it seems as soon as my warranty ran out, the headphone jack decided to mess up. Now, I only get audio out of my right headphone, and not the left. It is not to do with the headphones, as I've tried multiple pairs. So, now I read that I have to pay 99 dollars for a repair fee? Is this how it is? Or are there any loopholes around that ridiculous fee considering I paid three hundred dollars for something I expected to actually work.
Has anyone else had this problem? How'd you fix it?
I'm sincerely annoyed with apple, and very much considering changing MP3 forms. Because, my family have all owned a certain IPOD product, and they've all had problems.
Someone, please reply.

the same thing happened to me but i didnt know it would cost about 100 bucks to repair. ive tried it with 3 diffrent pairs of headphones

Headphone Jack Dying

My headphone jack no longer works. I was hoping that maybe someone could recommend a product that can connect through the dock connecter, but still be portable. and ideas?

I have tried to do few searches for you and hardly find any earphones with the dock connector, unlucky the new Nano's earphones cant fit it as it comes with an additional minijack. I have asked a technician in Hong Kong, he suggested that you can buy an (USB) dock adapter and cut the USB-end plug and replace it with a minijack (input) and plug an ordinary earphones with it.

T420 headphone jack no sound

New problem here.
1. recently updated all drivers and such through lenovo updates and drivers after replacing laptop screen.
now headphone jack no longer works. could be just coincidence. Sound continues to port through speakers, and I can't find any diagnostic to help me see if the audio card "sees" the headphones.
yes, the headphones have been tested elsewhere.
your suggestions appreciated.

It depends since the jack is usually 4 pin (for sound and mic). Its possible that the connections don't line up correctly. Try some other head phone or 3.5mm stereo device. If you've used it before and it worked with it maybe something is in there or its damaged. Its not possible to trouble should those possibilities.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Multiple Headphone Jack Adapter?

Similar Messages

Maybe you are looking for