Multiple Invoice type to single Invoice list

Hi,
I am getting data for various interfaces and based on which i have defined order types and billing types respectively. However while trying to create invoice list from these invoices standard SAP R/3 throws a error. I am using IS-Utility for billing and process followed is Order to Invoice hence there is no delivery
Eg:
Interface                                   Sales Order type                         Billing Document Type                         Invoice List Type
Test1     ------->                                  Z001          ------->                             Z001                     ------->                         Z004
Test2     ------->                                  Z002          ------->                             Z002                    ------->                          Z004
Test3     ------->                                  Z003          ------->                             Z003                    ------->                          Z004
Message for Error log:      "The billing type could not be determined for the specified transaction"
Can some Please help me and give me viable fix for the same.
Thanks In advance,
Anand Iyer

Go through the definition given by SAP
Probably, your issue falls under the last category.
G. Lakshmipathi

Similar Messages

Combining multiple deliveries in to single invoice in exports

Dear All,
While combining multiple deliveries in to single invoice in exports process, the invoce is getting split due to different header data.how to over come from this problem because this is client requirement.
Split due to different header data
Name $000000001 $000000002
Number of foreign trade data i 0000000610 0000000612
Regards,
Siddarth

Hi..
1)In VTFL-Header- Maintain B in redertime export field.
2)In VTFL Item level for your item category make sure you have maintained Data VBRK/VBRP as 003.
Save.
Try again creating invoice.
Regds
MM

Want to add multiple idoc type with single message type.

Hi Gurus,
I have a problem. I want to add multiple idoc type with single message type in WE20.
How we can do this in WE20 or is there any other way to do that?
Please help me.
Thanks in advance.
Srimanta.

hi,
basically in partner profile i.e. in we20 , we add details to the receiver / sender port that we have created using we21.
so what exactly we do in that is that we first use the message type for those idocs that we have created.
now based on those message type we create a process code. now this is the reason why you cannot apply several message types with the same name in we20... as process code is unque for each message type.
so thats why you can only assign the same message name to several idocs in we82 and then in we20 define the process code for that message type.
it will solve your problem.
hope this will help you!!!
Thanks & regards,
punit raval.

Is there a service to list invoice types and all invoices for a customer?

Hi gurus!
The header/subject speakes for it self: is there a service method that lists all available invoice types?
The customer uses ecc with ehp3 and I have only found a service for getting an invoice for an invoice Id. But I also want to list all invoices for a certain vendor/customer and to list all invoices for one or more search criteria and thus get a list of invoices that spans over several vendors/customers.
I have got the service info from the following place:
http://help.sap.com/content/documentation/esoa/docu_esoa_erp.htm
and there chosen "Enterpise Services for Enhancement Package 3 for SAP ERP 6.0".
I'm not sure I have read the library of services correctly though. Is it possible that a method for invoice can be under a service which is not a service for invoice? Or is the library very "strict" so that I can assume that there actually are no services for the purposes stated above? There is no search functionality that I can see...
All the best
Benny

I'm not looking to cripple my computer over a virus software hang-up.
The computer is already crippled. Remove the Intego product, which is worse than useless and worse than the imaginary "viruses" would be if they really existed, which they don't, by following the instructions on this page. If you have a different version, the procedure may be different.
Back up all data before making any changes.

Multiple sales order with single invoice

Hi !
For the same dealer can we make single Invoice dispatching with multiple sales order ??? and How ?
Thanks.

Hi Indrajit
If you want to create a single sales order into Multiple delivery then make sure that the delivery split should take place
The following are the parameters for the delivery split
Ship to party , route , delivery date, Shipping point ,Confirmed quantity date , Delivery priority
Example :
Say you have line item 1 & line item 2 , for line item 1 you have different ship to party and for line item 2 you have different ship to party then delivery split will take place for this two line items
Regards
Srinath

SharePoint 2013 List - Multiple Data Types in the Same List

In the same SharePoint 2013 list in Data Sheet View, I want to have one column where my end users enter inputs for KPIs. There are 3 groups of KPIs (A, B and C) and they each have different data types (A-string, B-decimal, C-percentage) and I want to be
able to base their input options off of the KPI type
Does anyone have any suggestions on how I can leverage my parent-child relationships so when an end user...
1. Picks KPI type A, they can select from a choice filed (Green, Yellow, Red)
2. Picks KPI Type B, they can enter a decimal (-1.000 to 2.000)
3. Picks KPI Type C, they can enter a percentage (-100.00% to 100.00%
I'm using if I want to keep this in one list, one column and in data sheet view that the out of the box solutions won't meet my requirements. I was looking at some solutions from Bamboo (Lookup Selector Column) but don't think that applies here.
Thanks!
Johnny

Hi Johnny, you can accomplish this using cascading lookups in InfoPath if that program is available to you. Otherwise, if you want a 3rd party product, we use the Kwiz cascading lookup and it's worked wonders for us:
http://www.kwizcom.com/sharepoint-add-ons/sharepoint-cascading-lookup-plus/overview/
Note: I have no relationship with Kwiz, just vouching for the product.
cameron rautmann

Outputting multiple variable types from single output vi

Hello,
I am trying to make a vi that takes some inputs (they are not too relevant to my problem) and has a single output.
My problem is that I'd like the output variable type to be left unknown until runtime.
For example, the vi will decide appropriately when to output an integer, string or double variable type.
Furthermore, inside the vi, I need a way to select the appropriate variable type to send, hence I need a way to check the type of a variable (I don't really know how to do that either).
Can someone give me some advice?
Thanks
David

Data types are determined at compile time. You cannot have a run-time decision for a data type.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Multiple Output Type

Hi Gurus,
What is the configuration required to Assign 2 multiple output types for single invoice type.
i have configured a new ouput type. i have maintained the condition record also and maintained in procedure as well.
but the new output type defined is not triggered only the existing output type is displayed.

Hi,
You can do it under the transaction NACE
First create all required output types under "output types" option under application "V3"
Then assign those to your output determination procedure under "Procedures"
Assign this "output determination procedure" to your billing type under transaction V/25
Then maintain output condition records under VV31 transaction.
If you do it correctly, when you create your billing document system will automatically determine the correct output type in to the billing document.
I found below link very useful to understand how to configure output types in SAP.
[Output type configuration|http://learnsaptips.blogspot.com/2010/08/output-determination-in-sap.html]
Best regards,
Rahal

Reg- Single invoice for multiple delivery docs

Dear All,
WIth the suggestions from the below given thread, i have changed the routines in copying control for item level as 03.
SAP ERP Sales and Distribution (SAP SD)
Using delivery duelist(VF04) , I selected 2 pending docs and tried to create billing doc , but it got created as separate invoice. what is the actual process to create single invoice from multiple delivery document.
Rgds

Those deliveries having same criteria like,
1. Payer
2. Payment Term
3. Incoterms
4. Destination country
5. Billing date
6. Actual Goods issue date
7. Foreign data trade
8. Billing doc type
9. Shipping conditions
10 Account assignmment group
11. Exchange rate
12 Billing relevance field in the item category
13 Sold to party
will be combined into one Billing document automatically and this controlled from the copy control table. and it VTFL choose your delivery header and in that at item level VBRK/VBRP should be 001
In VF01 you can input three or more such deliveries and execute then those will be combined in to a single bill and you can do that in VF04 also
Regards
Raja

Single invoice for multiple deliveries

hi friends,
its a case of multiple deliveries in single inoice. split analysis shows split due to defferent header data , number of foreign trade data . As far as I know every delivery is bound to have a unique foreign trade data. How can I combine deliveries into one single invoice.My customer, material , order type , delivery type are all the same.
Pl. help.
regards,
rahul

Hi,
In your case ,kindly check the copy control configuration in VTFL for the field " Determ.export data     B--Redetermine export data
once it is maintained and system will combine multiple deliveries into one invoice in your case.
copy control configuration
Target Bill. Type FE                   From Delivery Type LF
                          Invoice                                    Delive
Copying requirements   003 Header/dlv.-related
Determ.export data        B     Redetermine the export data
Allocation number      E
Reference number       A
Copy item number      Tick
If you have any further clarifications let me know
REgards
Damu
REgards
Damu

Single invoice for multiple DO & Output for the same!

Dear Gurus,
I have configured an output type for Export & its for Collective billing,where we have a contact,a sales order and multiple Outbound deliveries but have one collective billing for multiple DOs.
Here the issue is :-
1-when i go for collective invoice ,it does not generate a single invoice with all DOs
2-thus due to which output too is not getting generated.
I want the settings needed for collective invoice & output type for this export invoice.
Regards
Swati Bhatt

Hi,
!- Combination criteria in billing is different (gives two diff nos.)
In copy control at item level DATA VBRK/VBAP assign routine 001(SAMPLE INVOICE SPLIT)
2-Number of foreign trade data is diff again.
Check foreign trade data, It should be same in all delivery document
kapil

Billing due list gettnig updated with unwanted Invoice type

Hi SAP Guys,
Using VF04, i get a Billing due list. The issue is - I don't want a particular invoice type to be seen in the Billing due list though that invoice type exists and has different purpose.
Please, advise.

hi,
pl do it this way
1) go to VF04 t.code
2)enter the selection criteria as required to carry out the billing process.
3) then the second field in the VF04 selection screen, you have billing type field > on the right side you have an arrow > clikc to open it > on the top you will find two green light and two red lights > here you have options to select or exclude
a) a range of billing doc types
b) single values.
4) now go the red light single values and give the billing type which you dont want to invoice.
5) click the execute button there.
6) Now all the screen selection is done
7)Now click the save button > it will ask do you want to maintain billing due list > click yes > give a name and save it.
8) now you have created a varaint for VF04.
9) Execute the due list.
regards
sadhu kishore

Multiple invoices of a single vendor

Hi friends,
Instead of FB60, I would like to know if I have multiple invoices for a vendor if it is possible to go to a particular transaction and key in the general info only once and then key in the invoice number, account being charged along with the invoice amount. I believe there is a screen called (Multi Voucher-Single Supplier) but unable to trace.
This would allow us to type in the invoice number, the invoice amount and the G/L account to be charged on a continuous basis and not have to key everything separately each time for high volume vendors. It saves time in keying. Please advise.
Thanks
Ajay

Hi,
You can create a LSMW or a Z-Program for this.
Hope this helps, if yes, please assign points.
Regards,
Harish

Multiple deliveries into single invoice

Gurus,
My business requirement is like this,
Order is created and delivery process is done with PGI,but the material moves with manual invoice/DC,but the end of the week,all deliveries are compiled into a single invoice for particular customer.Wheares the header condition,business item remains same.When i tried to put all deliveries for the customer X in vf01 and execute,the individual deliveries cannot be convereted into into single invoice.When split analysis is done it says header is different,but to my knowledge all header ,business items are unique.Kindly help me at this ase

- Try using Tcode VF04. Opt for delivery related billing active.
- Select the desired delivery in Billing due list. (Press Ctrl Key from keyboard to select multiple lines).
- Then you have 2 option
1. To click on Collective Billing button to do a collective invoice for the selected delv doc.
2. To analysis whether you will be able to a collective billing or not. To analysis that
- click on simulation button.
- Billing Doc Simulate: Billing Doc Overview Screen
- Select all lines.
- There first go for Logs, by pressing Log button.
- Then click on Split Analysis button to get split analysis.
- If you find any split reason and modify/adjust your copying control accordingly to do combine billing
- Finally, click on Collective Billing button to do a collective invoice for the selected delv doc.
Regards
JP

Single invoice for multiple orders with different divisions

Dear All,
while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
Thanks In advance
Regards
CNRNAIR

Hello
single invoice for multiple orders with "different divisions" invoice is getting split
FYI - Different Division means different Sales Area.
So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
Thus, combining docs with different sales area is practically impossible.
Provided, you are using common division.
Hope this assist you,
Thanks & REgards
JP

Multiple Invoice type to single Invoice list

Similar Messages

Maybe you are looking for