Multiple Item edit with videos (is it possible?)
i am just asking if anyone knows a way to change the video type of several videos all at once,
what i am trying to do is upload 5 series of futurama to my ipod,
i load them into itunes and it automatically puts them under movies, is there anyway of changing it to the tv show section without having to go through every file individually and set it to tv show, thanks
Hold control and highlight each of the episodes that you want to change and then right click and select get info and you can change that for all the videos at once
Similar Messages
-
Problems Sycing multiple Audio tracks with Video. Please help
I have a video clip from my Cannon 70D that im trying to sync with 2 seperate audio tracks from my Zoom. One LR stero track and one wireless mic track.
I select all three clips in the event windo and chose SYNC CLIPS from the clip menu. I take the Syncronized clip and place it in the time line , but when i go to expand audio there are only two track available - The scratch audio from the camera clip and what appears to the LR audio from the Zoom. Hard to tell though because Final Cut renames the Audio for me. I did notice that the sample rate on the video and audio files are different. Could that be the problem?I haven't had much luck with SYNC CLIPS. I suggest you use Multicam instead.
Go to the Inspector and set up your Canon video as Angle 1. Set Zoom XY as Angle 2, and set Zoom wireless mic as Angle 3. Then Select the clips and FILE/NEW MULTICAM CLIP.
http://help.apple.com/finalcutpro/mac/10.1/#ver23c764f1 -
URGENT: Full Time Loop: Multiple QT Files with Video
Hi,
I have a presentation that contains only 1 slide.
Contents:
Video-movie: 2 min.
3 QT files on a loop.
Question:
How do I have the QT files loop for the entire 2 minutes of the video?
THIS IS URGENT; I NEED TO PRESENT THIS AT 7PM TONIGHT.
THANKS.Hi,
This is what i have:
2 minute video
3 self-looping QT files
I want all 4 files to play simultaneously during the entire 2 minutes.
You are certain that QT Pro allows to set these parameters?
Where would I go within QT Pro? -
Find and replace with multiple files and with a watch folder
I am trying to create a watch folder that uses red_menace script to:
1. Have a folder that receives multiple xml files that run the script one by one.
2. then move the files to an output folder.
I tried modifying the set TheFIle to choose file -- the original text file to:
with multiple selections allowed
But that doesn't seem to work. I know i'm missing a step. Any help is much appreciated!
Thanks!
The way i'd like to setup things is having an input folder on the desktop (or just have the application on the desktop and I can drag the files onto it), and let it do it's thing. Once it's done have it export the xml files into an output folder.
Here's what i got so far:
on open
set TheFIle to choose file -- the original text file
set TheFolder to ("Macintosh HD:Users:user1:Desktop:out") -- the folder for the output file
set TheName to (GetUniqueName for TheFIle from TheFolder) -- the name for the output file
set TheText to read TheFIle -- get the text to edit
set Originals to {"KPCALDATE", "KPCALEVENT", "KPCALDAY", "KPCALBODY", "obituaries name", "" & return & "</cstyle></pstyle>" & return & "<pstyle name=\"obituaries text\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>", " .com", " .net", " .org", " .edu", "www .", "www. ", "Ho- nolulu", "<pstyle name=\"kicker 12\"><cstyle allcaps=\"1\">fashion news</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "<component name=\"Headline 1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline 1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 36\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>-", "-", "
Per serving:", "<pstyle name=\"Titlebar - mini, red\"><cstyle allcaps=\"1\">NATION & World </cstyle><cstyle allcaps=\"1\">Report</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "</cstyle></pstyle>"} -- the terms that can be replaced
set Replacements to {"subhed", "subhed", "subhed", "Normal", "obituaries text", ", ", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>
", ".com", ".net", ".org", ".edu", "www.", "www.", "Honolulu", "", "<component name=\"Headline1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 27\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>", " ", "
Per serving:", "","" & return & "</cstyle></pstyle>"} -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (replaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end open
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is missing value then set TheExtension to ""
set TheName to text 1 thru -((count TheExtension) + 2) of TheName
set NewName to TheName & "." & TheExtension
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & "." & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to replaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as Unicode text -- TID's are case insensitive with Unicode text
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
return SomeText
end replaceText
Message was edited by: gamebreakersWhen you use the open or adding folder items to handlers, you need to add the parameters for the file items passed to them.
I'll go ahead and post the applet/droplet version of my original script from the previous topic for reference:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into the Script Editor">
-- search and replace multiple items applet/droplet/folder action
-- the terms to replace - edit as needed
property EditableItems : {¬
"one", ¬
"two", ¬
"three", ¬
"four", ¬
"five", ¬
"six", ¬
"seven", ¬
"eight", ¬
"nine", ¬
"ten", ¬
"eleven", ¬
"twelve", ¬
"thirteen", ¬
"fourteen", ¬
"fifteen", ¬
"sixteen", ¬
"seventeen", ¬
"eighteen", ¬
"nineteen", ¬
"twenty"}
-- the folder for the output file(s) - change as needed
property TheFolder : (path to desktop)
property LastEditItems : EditableItems
on run
the applet/droplet was double-clicked
open (choose file with multiple selections allowed)
end run
on open TheItems
items were dropped onto the applet/droplet
parameters - TheItems [list]: a list of the items (aliases) dropped
returns nothing
repeat with AnItem in TheItems
ReplaceMultipleItems from AnItem
end repeat
end open
on adding folder items to this_folder after receiving these_items
folder action - items were added to a folder
parameters - this_folder [alias]: the folder added to
these_items [list]: a list if items (aliases) added
returns nothing
repeat with AnItem in these_items
ReplaceMultipleItems from AnItem
end repeat
end adding folder items to
to ReplaceMultipleItems from SomeFile
replace multiple text items in SomeFile
parameters - SomeFile [alias]: the file to replace items in
returns nothing
set TheName to (GetUniqueName for SomeFile from TheFolder) -- the name for the output file
set TheText to read SomeFile -- get the text to edit
set Originals to (choose from list EditableItems default items LastEditItems with prompt "Select the terms to replace:" with multiple selections allowed) -- the specific terms to replace
set LastEditItems to Originals
set Replacements to (EditItems of Originals with Title given Prompt:"Edit the following replacement terms:") -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (ReplaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end ReplaceMultipleItems
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is in {missing value, ""} then
set TheExtension to ""
else
set TheExtension to "." & TheExtension
end if
set {NewName, TheExtension} to {TheName, (ChangeCase of TheExtension to "upper")}
set TheName to text 1 thru -((count TheExtension) + 1) of TheName
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to ReplaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as text
if SomeText contains OldItem then
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
try
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
on error ErrorMessage number ErrorNumber -- oops
set AppleScript's text item delimiters to TempTID
error ErrorMessage number ErrorNumber
end try
end if
return SomeText
end ReplaceText
to ChangeCase of SomeText to CaseType
changes the case or capitalization of SomeText to the specified CaseType using Python
parameters - SomeText [text]: the text to change
CaseType [text]: the type of case desired:
"upper" = all uppercase text
"lower" = all lowercase text
"title" = uppercase character at start of each word, otherwise lowercase
"capitalize" = capitalize the first character of the text, otherwise lowercase
returns [text]: the changed text
set SomeText to SomeText as text
if CaseType is not in {"upper", "lower", "title", "capitalize"} then return SomeText
return (do shell script "/usr/bin/python -c \"import sys; print unicode(sys.argv[1], 'utf8')." & CaseType & "().encode('utf8')\" " & quoted form of SomeText)
end ChangeCase
</pre>
Edit: how does the choose from list dialog handle those big strings? I'm guessing not very well - is that why you avoided using them?
Message was edited by: red_menace -
How to select multiple items in ListView?
Is it possible to select multiple items (rows) in ListView? I'm able
to select only one item at a time.
I'm running Forte 30F2 on Windows NT 4.0.
Thanks in advance,
Ramarao
Get Your Private, Free Email at http://www.hotmail.comRamarao,
I talked to Forte support about this recently and they had nothing but
bad news.
They said that you cannot select multiple rows in a listview, and that
this is a
feature that will be in the next release ( release 4 ).
I then asked if it was possible for me to highlight a row manually ( and
do the multiple
select myself ), and they said that also wasn't possible. This is due
to the fact that
there are no displaynode properties that effect display attributes (
like font or color ).
They suggested that I try changing the smallicon to show rows that have
been 'selected'.
In other words, when you ctrl-click on any particular row, you could put
an icon at the
beginning of a row that shows that this row has been clicked on.
I'm still working on this myself, so I will keep you posted.
Jeff Pickett
From: Ramarao P[SMTP:[email protected]]
Reply To: Ramarao P
Sent: Tuesday, March 24, 1998 6:22 PM
To: [email protected]
Subject: How to select multiple items in ListView?
Is it possible to select multiple items (rows) in ListView? I'm able
to select only one item at a time.
I'm running Forte 30F2 on Windows NT 4.0.
Thanks in advance,
Ramarao
Get Your Private, Free Email at http://www.hotmail.com -
Dear all,
I have a input that looks like this:
HeaderKeySomeHeaderInformationItemKeySomeItemInformationItemKeySomeItemInformation...
Here's the actual input
TEHGMESS0026000000288S0001TEI2____026200006112410400000000 18010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000JTEI2____026200006112410400000000 19010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
HeaderKey = TEHGMESS
ItemKey = TEI2____
Is it possible to process this via MessageTransformBean (my actual scenario is JMS to IDoc)? I already tried but I only succeeded when having new lines in my input to separate between Header and (multiple) Items.
So when the input and my configuration looks like below it works, but when I only have a single row input it doesn't work, even when specifying xml.recordHeader.endSeparator = '0' / xml.recordItem.endSeparator = '0'. I even tried xml.endSeparator = '0' but no luck.
Input that works
TEHGMESS0026000000288S0001
TEI2____026200006112410400000000 18010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
TEI2____026200006112410400000000 19010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
Matching configuration that works for input which structures are delimited by new line.
Paramentername
Parametervalue
Transform.Class
com.sap.aii.messaging.adapter.Conversion
Transform.ContentType
text/xml;charset=utf-8
xml.conversionType
StructPlain2XML
xml.documentName
MT_TEI2Split
xml.documentNamespace
http://hansgrohe.com/pi/MQ/TEI2/10
xml.keyFieldName
SATZARTKey
xml.keyFieldType
CaseSensitiveString
xml.processFieldNames
fromConfiguration
xml.recordHeader.fieldFixedLengths
8,4,9,1,4
xml.recordHeader.fieldNames
SATZARTKey,SATZLENHG,NUTZLEN,MESSAE,MESSNR
xml.recordHeader.keyFieldValue
TEHGMESS
xml.recordItem.fieldFixedLengths
8,4,2,10,8,19,3,3,2,10,6,2,10,6,2,10,6,6,6,6,6,11,9,2,10,6,2,10,6,3,4,3,7,14,8,1,31
xml.recordItem.fieldNames
SATZARTKey,SATZLEN,BUCHART,TRNR,ANDGNR,MITEM,TEIVARI,BSTSTATU,REFTYP,ORNO,POS,REFTYP1,ORNO1,POS1,CHATYP,CHARGE,CHAPOS,ABBVONL,ABBNACH,ZUBVONL,ZUBNACH,I2MENG,I2BUNR,REFTYPN,ORNON,POSN,REFTYP1N,ORNO1N,POS1N,BSTSTATN,ABUSERAB,ABUSERFN,ABUSERNA,I2TIME,I2LIDNR,I2FMCODE,FILLER
xml.recordItem.keyFieldValue
TEI2____
xml.recordsetName
records
xml.recordsetStructure
recordHeader,1,recordItem,*
Any clues on this? Is it even possible to have multiple structures in one row? Many thanks in advance
JensSAP came back to me with this answer:
First, I would like to point the documentation for Message Transform
Bean (MTB) in 7.4:
http://help.sap.com/saphelp_nw74/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm?frameset=/en/57/0b2c4142aef623e10000000a155106/frameset.htm¤t_toc=/en/45/0ea2de423c2d6be10000000a11466f/plain.htm&node_id=18
As it is written at the beginning of this document, MTB is used to
call classes written for the Plain Adapter Engine. So you may find
additional documentation about the parameters for convertion in the
documentation of the Plain Adapter Engine
(http://help.sap.com/saphelp_nw74/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm?frameset=/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm¤t_toc=/en/75/246b3de666930fe10000000a114084/plain.htm&node_id=11).There it is written that the structures by default are
arranged line-by-line. The endSeparator just adds additional character
string as a separator after the last column in a row.
I hope that this answers your question. MTB expects the data to be
structured line by line.
You may add a custom module, which transforms the message in the
expected format.
If you have a look at the second link there's even a more precise wording that multiple structures within one line are not supported:
xml.NameA.endSeparator
Even if no specification is made here, a line break must follow since substructures are always expected as a line of the document.
Bottom line is that it's not supported by now and verfied by me with PI 7.4 SP5
Many thanks to Ambrish, Amit and Hareesh for the valuable input. Will probably try to work things out for now following Ambrish's / Hareesh's suggestion as this seems easier to implement. Amit's proposal with a dedicated module however would probably be the more polished solution.
Cheers
Jens -
Can no longer edit info on multiple items
It is so frustrating when an update makes some new change that takes away major functionality. I have a folder of movies in itunes, a genre really, called "home movies". I want to select them all and change something on them. In this case, change them to the new "media kind" Home Videos. So I select them all, or just a few or even just two of them and I get this message:
So in order to change the info in any way on these items, I need to select every single one of them one at a time. Thing is, they are all the same media type anyway. It seems this just must be a major bug, but wonder if anyone has any idea as to how to get around it so that I can access the info on multiple items like before.Neainc1 is on the money. I totally agree. McBlob, the file types are the same and even if they are not, I should be able to multi select them just as I always could before!
I actually called Apple Support and after a long time while the agent checked with senior tech, they agreed it was a flaw and hoped it would be fixed in an update and encouraged me to send feedback to Apple, which I did, but I'm always suspicious about it meaning anything. Still, hopefully they will fix it, but in the mean time, it is possible to downgrade to 10.7 here: http://support.apple.com/kb/DL1576 -
Multiple SharePoint 2010 list items edited simultaneously in InfoPath 2010?
I am looking to distribute a list of accounts to salespeople, so they can update some of the fields for their own accounts and save the changes back to SharePoint. We are currently sending them Excel workbooks, but this isn't ideal. Since the requirements
include drop-down choices, conditional formatting, and data validation, I'm wondering if InfoPath can be utilized so that a salesperson can filter the list by their name and see (only) all of their own accounts (records/rows/list items) at once in InfoPath,
then make multiple changes to different fields (columns) for their accounts, and finally submit the form--saving multiple edited records simultaneously. Think Datasheet View, but with conditional formatting and data validation. Is this
possible in any application?Hi ired25,
Few point to mention here.
InfoPath form will be linked with each SharePoint List item
user can change/update their own record using Datasheet view(validation will be applied for sure if it configured as formula)
you can think to use edit form InfoPath form to leverage infopath's powerful rule engine, which might delayed user's productivity but very safe for data.
I dont think a InfoPath for can handle multiple item in one single form.
For permission you can think of "Item level permission" from list settings => Advance settings
As a thought "Content approval" can be used for data sanity.
Hope this will help
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply. -
Edit Multiple items.Is There a way?
I have a very large number of recorded Tv-shows in my mac,I want to edit them all together.So that I can place them in the Tv Shows library instead of the movies library.They are about 200 Episodes So I can't do it one by one.How can I edit the Video tab when in ''multiple items,Get info''.I Have the same proplem with music videos.How can I edit them all together?
Thanks, Eustace and Kirk.
To Kirk--I saw that screen when I was trying to troubleshoot before doing the smart thing and asking the forum--but do I have to have both drives plugged in at the same time? It's (appropriately) only showing the one that's currently plugged in (whether "Oldie" or "Newbie").
To Eustace--yes, that's what I would assume would happen--it's what happened when I plugged in "Oldie" for the first time. I was caught off guard when it didn't prompt me this time. For plenty of people, "hey, if I plug in any external HD it asks if I want to use it as backup--sweet! Because I [launched my old one out of a fifth-story window by mistake] or something.
I really appreciate both of your quick and helpful replies. Thank you! -
Is it possible to query multiple items in a single OPC read?
I am trying to read several data items at one time via OPC. Is this possible? If so, how? I have tried passing multiple URLs to specific items and a single URL header with multiple variable names. Both methods return an OPC error about invalid items. I am trying to do this to speed up OPC access times. Reading each item one-at-a-time is a little time consuming for our application.
The only way to read multiple datapoints via OPC is to build an OPC item that contains multiple pieces of information. I checked this here, and I had no problem reading an array of data from an OPC Server with DataSocket.
I read the "opc:/Matrikon.OPC.Simulation/Random.ArrayOfReal8" data item from a Matrikon OPC Simulation Server that publishes an array data item. The OPC Demo server is available for free download at http://www.matrikon.com/opc/htdocs/simx.htm. You can read this as an array of doubles in LabVIEW.
For your application all you will need to read your data multiple items at a time is a server that can publish arrays.
Hope this helps. -
A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5. -
Error while creating Multiple Items Shopping Cart with Asset Assignment
Hi All,
I am creating Shopping Cart with multiple items for different Assets.
Example: I have Two Assets (Asset A with the budget of $1000 and Asset B with the Budget of $1500) in the back end system.
Asset A assigned to Order 102649996 (value - $1000) and Asset B is assigned to Order 102645121 (Value - $1500).
I am trying to create Shopping Cart with Two Items for Asset A and Asset B (which are available in Back End).
I created First item (001) in the Shopping Cart for Asset A and Value $750.
I copied the First Item Details to Second Item (002) and changed the Asset as B and Value $1000.
When I click on Check tab in Shopping Cart Browser, the SRM System is giving the Error Message like
Item 001 Order 102649996 budget exceeded
Item 002 Order 102649996 budget exceeded
I am getting the above error, only when I copy the first item details to the second item while creating Shopping Cart.
Actually the Budget is not exceeded (Asset A Budget is $1000 - First Item and Asset B Budget is $1500 - Second Item) and SRM system is taking the order 102649996 (which is assigned to the Asset A) for the Second Item 002 also.
Kindly let me know the Solution or Please let me know do we have any OSS note to resolve the issue.
Thanks a lot in advance.
Best Regards,
Sudarsan
Edited by: KOYYA SUDARSANA NAIDU on Aug 18, 2008 8:22 PM
Edited by: KOYYA SUDARSANA NAIDU on Aug 19, 2008 6:29 AMHi. It is a "feature" of SRM.
I asked SAP about it and did not get a good response.
If you enter Asset A, it will copy the internal order number from that asset into the cart. You can not see the internal order in the web, but you can see it in BBP_PD.
If you then change the asset to asset B, it will not refresh the internal order number.
This means you get internal order A on asset B.
It happens any time you change asset number, so if you copy a line then change you will get this problem.
We ended up using the BBP_DOC_CHANGE_BADI to RFC into R/3 and update the internal order number.
Regards,
Dave. -
DVWP with Multiple Item Form duplicates values on the screen on new item
Hello,
I have created a custom page in SPD called Submit.aspx. I have 3 custom lists (A,B and C). On that page I have two list webparts (from list A and B) and one multiple item form DVWP (list C). I have edited the list webparts to display the Add new item link only.
Sometimes when a user adds a new item numerical values are duplicated on the screen from the item below (see the screenshot). It happens only on the screen. When a user saves the form or refreshes it the values disappear. How can I fix this to not duplicate
the values when a new item is created. Projects on the list are sorted alphabetically. The item before the last one on the screenshot is the new item that has identical values as the last item. On save or refresh duplicate values
disappear from a new item.Hi LetMe, it would be difficult for anyone to help you with the amount of customization you've done, unless you provide the code for us to check.
cameron rautmann -
Cannot have multiple items selected in a DropDownList when edit the forum in sharepoint
hi ,
i have custom forum for new and edit, in new forum we have controls drop down values, when select drop down1 values that related values are displayed in dropdown2 , when edit item that time we getting error
Cannot have multiple items selected in a DropDownList.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Cannot have multiple items selected in a DropDownList.
Source Error:
HttpException (0x80004005): Cannot have multiple items selected in a DropDownList.]
System.Web.UI.WebControls.DropDownList.VerifyMultiSelect() +124
System.Web.UI.WebControls.ListControl.RenderContents(HtmlTextWriter writer) +10956501
System.Web.UI.WebControls.WebControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.WebControls.WebControl.RenderContents(HtmlTextWriter writer) +13
System.Web.UI.WebControls.WebControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42
ASP._controltemplates_amat_appayrequest_webparts_appayrequest_appayrequestusercontrol_ascx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\CONTROLTEMPLATES\AMAT.APPayRequest.Webparts\APPayRequest\APPayRequestUserControl.ascx:350
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +253
System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +87
System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +53
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240Hello,
Could you please share your code with us? Also explain how you are binding DDL.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Possible to make an item editable for certain users and read only for other
Is it possible to make an item editable for certain users and read only for others?
I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?Thank you, your suggestion worked.
It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.
Maybe you are looking for
-
hello, my i phone 4 froze suddenly. before it did, the battery was 80% full. i called it from another phone and i can hear a ringing tone but my phone is completely dead. i pressed the operating button and nothing happens. also i tried connecting
-
Problem with temp space allocation in parallel query
Hello I've got a query which matches two large result sets (25m+ rows) against each other and does some basic filtering and aggregation. When I run this query in serial it takes about 30 mins and completes successfully. When I specify a parallel degr
-
Got a new Mac. How do I not miss a beat?
I have have all my projects on my macbook pro. I need to transfer everything to my new mac pro. All my capture scratches are on external drives all I need is my project files,So everything will pop up on my new computer in finalcutpro just how they a
-
User entered format not retained when using BAPI_CLAIM_CREATE
The notification text entered by the end user from a portal login is sent in (tables: notif_text of BAPI_CLAIM_CREATE) and when retrieved later there are unexpected extra spaces or condensing of space or paragraph formatting is messed up. I have t
-
File Write Error upon Export Movie
Using iMovie 9.09 under OSX 10.8.5 My sequence of events: 1. Import from Canon digital video camera 2. Create a project from the imported clips (no edits - it is an athletic event) 3. Share to iDVD 4. In iDVD create a disk image, then exit iDVD 5