Multiple Printer issue

I've hooked up 2 printers and an external hard driver to an AE via a USB hub. The Brother MSC 9700 and the hard drive perform okay, but the Epson Stylus Photo 2200 crashes XP every time I print from it. It does print, but whether I print a test page or a program, Explorer.exe crashes with a debug message. If I disconnect the Brother and only run the Epson, the program does not crash.
Message was edited by: mguerrette

Hi,
In order to get multiple copies of prints from SAP you need to make following configuration.
go to SPAD
select the printer, from which you need to get multiple copies of prints.
Double click on it,
Now you will see the details of the printer with tabs like
Device Attributes , Access method , output attributes , Tray Info.
now select output attributes
there you will see Copy Counter with drop down selection. in that select
PASS COPIES AS SEPARATE OUTPUT REQUEST(IN SAP SYSTEM)
Please let us knwo if you have any other issues,
Regards,
Ravi

Similar Messages

Adobe forms multiple print issue

Hi All,
I am new to ADOBE forms and my development involves generating prints of the same form with different data on it in one go. Now everythign is working fine except for the print preview bit. I want to disable print preview and dialog. I have passed all necessary parameters for FP_JOB_OPEN but that is not providing desired results. Could anyone please advice me on how to fix this issue?
Regards,
Renjith

Hello Renjith,
Please try the below code. It should work.
DATA : ls_params TYPE sfpoutputparams.
ls_params-dest = <dummy printer maintain in your table TSP03 like 'LP01'>.
ls_params-nopreview = 'X'.
ls_params-nodialog = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
     ie_outputparams = ls_params
EXCEPTIONS
     cancel = 1
     usage_error = 2
     system_error = 3
     internal_error = 4
     OTHERS = 5.
Reward point if it solve your issue.
Thanks and Regards,
Gopi

Oracle Reports Printing issue

I have multiple printing issues with Oracle Reports developed in 10g. Please help me to resolve the issue.
1. Even though i set ORIENTATION to landscape, it is printing Portrait .
I have tried the below options
1. I SET ORIENTATION AS landscape Under Data Model, System Parameters
2. I have tried to pass ORIENTATION=landscape from the Keymap File
3. I have tried to set ORIENTATION=landscape Under Paper layout Main,Header and Trailer Sections.
2. Always the report is trying to fit in a single page (Width wise) which is annoying the user. I want to set Scaling instead of fit to a single page. How will i achieve this?
i was trying to display the reports in SPREADSHEET Format.
Thanks for all your Help.

Hello Chris90909,
switch width an height properties as Inol mentioned.
http://nycapex.blogspot.com/2010/03/landscape.html
If you have any question about the issue, let us know.
Don't forget to mark Correct or Helpful accordingly.

Multiple computers network printing issues

Hi All,
I am hoping someone can help.
I have 8 x 2.4 ghz 24" Imacs operating 10.4.11 networked via ethernet to two printers, (Canon ipf5000 and Canon ipf6100). The Imacs are wired through Cisco switches to the printers. When sending from Adobe CS4 I use a specific Canon printing plugin for the printers mentioned. When I have multiple print drivers running, (or even open and not active), the printer driver can't handle it. The various drivers seem to affect each other causing miscues galore. Will a true print server clear this up?
Any thoughts or suggestions?
Thanks in advance,
phil

Hi j_dext,
I understand the printer is setup on the network and working on the one computer but the other one isn't recognizing the printer.
I will be happy to help you.
Print a configuration page to get the printer's IP address.
Printing Information Pages. Go to the section M1210 / M1218nfs series to print it from the control panel.
If you have a valid IP address for the printer then try and access the embedded web server for the printer.
Type the IP address into Internet Explorer address bar.
If it loads the printer's network page then the printer is on the network.
Power cycle the computer and router.
Make sure the computer is on the proper network.
Find out what the computers IP address is.
Hold down the Windows key on the keyboard and the letter R.
Then type "cmd", then type "ipconfig".
Check the computers IPv4 address.
The first 3 sets of numbers should match the first 3 sets of numbers on the printers IP address to be on the same network.
Do the first 3 sets of numbers match the printer's IP address?
Try and ping the printer.
In the same window type ping IP address of printer. (space in between ping and the IP)
Do you get any replies back?
Then run the installation again if everything is recognized and you get a reply back.
HP LaserJet Full Feature Software and Driver 32 bit.
HP LaserJet Full Feature Software and Driver 64 bit.
Please let me know if this resolved the issue or if you need further assistance.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Firmware upgrade?? Printing Issues?? HP Designjet Z6100ps

I have a Designjet purchase as a demo in 1/2008. The last firmware upgrade that is currently installed is GG-GG_9.0.0.4. I am having printing issues where it prints about 4" of my prints from Apogee Printdrive (which comes from a windows computer) and then wants a restart with the firmware error code. Prints from the MAC are fine and will go straight thru. I have tried multiple firmware upgrades (the latest is GG-GG_11_00_00-2_mvl40-x86-opt_B.dmg) and it is all invalid. After a week of trial and error and trying different upgrades from different computers I am at my whits end. We print to the this printer presslayouts to look at before plating for press. Printing Banners from the MAC is no problem. Anyone have any suggestions. And of course, warranty and service is nill.

I am linking you to the the Designjet forums below. Please just repost your question their it will have better chance of getting answered.
Designjet forum

HP OfficeJet 2544 Windows 8.1 Printing Issue

Hi there,
I am having a frustrating problem with my HP OfficeJet 2544. It happens all the time if I want to print anything more than one or two pages, and it only happens to me on my Desktop PC (i.e. my wife's laptop doesn't experience the issue).
What is happening is this: I send a document (multiple pages) to the printer, and then after the first page or so, I get a Windows 8 error message popping up saying the document couldn't print. The printer then spits out whichever page it is currently printing, usually half printed. If I want to print a multi page document, I have to print it one page at a time. I can't even send it to the printer in groups of 2 or 3 pages!
The printer is connected wirelessly, but I don't think it is a wireless issue. We have good strong signal in our house, and in any case, if it was a wireless connection issue my wife would have the same issue, which she does not.
I thought there was some bug in my Windows 8.1 installation, so I did a clean reinstall. This did not fix the issue. I have also tried reinstalling the drivers (did not work either) and clearing out the Print Spooler folder (again, no luck).
The only thing I can think of is that a while back the HP Update program said there was a Firmware update for the printer, which I installed. But if this was the problem, I imagine it would be affecting my wife's Laptop too?
I am getting fed up with the issue, and as I am doing a part-time degree I have to print multi-page documents from time to time! Does anyone have any ideas?

Hello @SamuelH82
I have some ideas that come to mind when I read through your post about the printing issues you have solely from your computer, as the other computer works find with the printer.
The printer hardware proves to test out alright, as the other computer does function fine with it.
I would suggest first running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. This alone could help fix the problem.
Also, try printing from other programs. Do they all appear to have the same problem?
Disable any firewalls and anti-virus' temporarily. Try printing again to see if that helped.
How far is the printer from your computer, and what are in between them that could cause interference? Having the computer and printer too close could cause disconnections.
Let me know the results thus far and your findings.
Enjoy the rest of your day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Mac O/S X with CS3 printing issues to a Xerox

I have multiple systems running 10.4.x and 10.5.x using CS3. We can get Acrobat to print when we select "Print as Image", all other applications in the suite will NOT print until we convert them to a PDF. Things were fine when we were using CS2, but once we upgraded all our systems to CS3 we've had nothing but printing issues. What can we expect when CS4 is pushed out?!? Does any one have any recommendations how to FIX this printing problem, we've reloaded our print drivers multiple times, but NO luck?
Thanks for any ideas or resolutions.
Bob

Reset the printing subsystem and then make sure you install the latest
printer drivers.
Mike

CS3 Printing Issue--Won't Collate

OK, here's my issue--I'm unable to print collated copies from any CS3 application (InDesign, Acrobat). I've tried every combination of checking/unchecking the collate box in both the application's print dialog and the printer settings to no avail. This happens on multiple printers (so I know it isn't a printer issue) and I'm able to collate from non-CS3 applications (Word, for example), so I believe it to be CS3 specific.
I'm currently running CS3 5.0.3, but iI had the same problem under a clean install of 5.0.
Any ideas? Manually collating is killing me.

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Yet another Windows Printing Issue

I've searched the net and these forums all afternoon trying to resolve my printing issues. I've followed all the common links posted by people who are tired of explaining the solutions to no avail. I do have the Gutenprint 5.1.3 driver installed. It doesn't list the 2100TN, but lists the 2100.
Gear:
Windows 2003 Server
HP LaserJet 2100TN Printer attached shared through Win2k computer on the local network.
PowerBook G4 (wireless)
I've been successful printing in the past with this equipment. I'm not sure what happened, except I do remember resetting the print services on my Mac a while ago. That wiped out all my printers. That must have been because I lost print capabilities to the LaserJet.
Any help is appreciated. This is a work environment and I need to print with my Mac fonts.

Greg
Thank you for trying to help. The work environment is a Windows 2003 Server, about 10 Windows 2k computers on a single domain. The HP printer is connected via the printer port on a Reception desk computer and shared as 2100TN. Let's call this computer Shubunkin. Shubunkin shares the printer to all on the network, including (hopefully) my Powerbook G4, which is connected via a wireless router. The G4 accesses the network folders via Samba - smb. The IP address of Shubunkin is in the same subnet as the other computers.
Long story short, I have spent many hours trying to figure this out on multiple occasions. The last time I was connected was by a $100/hr tech that helped sort out some networking issues we were having after a move. At the end of the day, I asked him if he could take a look at my Mac and get the printer working. It took all of 10 min., but I'm not even sure he knew how he did it. He's a Windows tech. I do remember the printer showing up somewhere in the printer browser (AppleTalk maybe) on my Mac and choosing it. It was late and back last October.
I want to be concise; I'm just not sure what information you all need to help. I do appreciate any efforts!!

Illustrator fill effects and printing issue

We just got a new canon imagepress C1+ printer and it's amazing so far. However when we try to print AI files with complex fill effects it never works. It just prints a blank page... As soon as we remove the fill effects and put something more simple in it prints it fine. We need the fill effects though.
We can't bypass it by rastering it because then it leaves these weird lines on the page. If we save to pdf it takes too long because we make changes all day on the files.
Has anyone ever seen anything like this or how to reduce the size when putting in complex fill effects? I'm not even sure it's the size issue because I printed off a simple fill effect design that was 300mb and it went fine.
Thanks for your help!

Thanks for all the responses. Well it is a one layer AI file. It does print when rastered but it leaves weird lines on the page. There is no transparency on it so that wouldn't work.
It does use a RIP when processing it to print. However on the server when spooling then printing the ram on the fiery controller shows it barely using it. So not sure if that would be the problem? It very well could be a driver problem because it prints fine to all other printers beside this new one. However Ive tried multiple drivers and still nothing. I wonder if this would more than likely be a printer issue as opposed to a illustrator issue?

Printing Issues with HP OfficeJet 100 and Windows 8.1

We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP ENVY 100 D410 Printing issues...

I have an HP ENVY 100 that has recently started having printing issues. We recently upgraded to Mountain Lion and had no problems in the upgrade nor have we had any other software that we've changed. The problem seems to be somewhat random and the results are always the same. When commanded to print the printer acts as if it is running out of ink and then distorts the fonts creating vertical lines on the page and skipping rows creating what almost looks like a bar code. It's most peculiar and the only way I can find to solve the issue is to completely restart both my system and the printer. Thinking that I had a driver issue on my Mac I used the utility on the printer to update drivers and none were found. To insure that the problems wasn't isolated to just my machine I tried our laptop as well and it seems to have the same problem. Has anyone had a similar problem?

Hi Talon,
That more liekly related to the software indeed, I would suggest trying the following steps:
Reset the printing system as listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01371980
Open the Applications folder, then Hewlett-Packard and then open the Device Utilities folder, launch the HP Setup Asisistant and follow the steps to reconfigure the device.
If there is no Hewlett-Packard folder simply re-add the printer by clicking the plus button under Print & Scan.
Now try printing and follow for any difference.
If the same persists uninstall any HP Software by following the HP Uninstaller under the Hewlett-Packard folder.
If there is no Hewlett-Packard folder follow the steps listed under Mac OS X 10.6, 10.7, and 10.8 > I used Apple Software Updates to install the product software below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02440673&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=5157536#N1305
Download and isntall the latest Lion Software below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-97934-2 &cc=us&dlc=en&lc=en&os=219&product=4073738&sw_lang=
Once completing the installation click the Apple icon and install any available Software Update.
Shlomi

New airport extreme and printer issues

OK here is the deal
I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. Thanks

There have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
Sorry to be so vague, just thought it might be a start for you.

Printing issue

I just replaced my b/w cartridge which was working for about 10 copies and now trying to print a colored copy and while the color print is fine, the black ink is coming out blurry/smudged. The screen indicates "Print cartridge problem (Black) Refer to device documntatnion to troubleshoot" I took out the cartridge, shook it, put it back in - no luck - help! Thanks

Hi @LYNNHAAG , and welcome to the HP Forums!
I see you're experiencing print issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Need help diagnosing cause of printing issue w/ image distortion

Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian

Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian

Multiple Printer issue

Similar Messages

Maybe you are looking for