Multiple projects, yet one flash file launched from browser
Hello everyone, I glad to be a part of this wonderful community. I have a really sticky Captivate 4 problem, and I wanted to get my feelers out there now before I really need to get this done before the end of the week. This question has to do with publishing. I have 7 project files, and I created a "menu" slide at the end of each of them that look exactly the same. In this particular slide, there are 7 'click boxes' spread throughout the page that launch all the other projects. If you are wondering why I did this, it's because I'm trying to cut back on load time when a user click on any individual project. Now, my programmer can only launch one .swf file from our webpage to get the first project started. So, does this mean Captivate will dynamically handle launching all of the other projects(assuming multiple flash files are created) when they are launched from these "menu" slides? I'm a bit confused. I'm likely confusing some of you as well. It is hard to put the problem into writing. Please help!
Okay, so lets look at the problem, shall we?
You created seven projects. But you later asked:
So, does this mean Captivate will dynamically handle launching all of the other projects (assuming multiple flash files are created) when they are launched from these "menu" slides?
First off, with seven different projects, you end up with seven different outputs. Assuming you are using Captivate in the basic form, you will end up with seven different SWF files and seven different HTM files that need to be factored into things. You may have more files than that, depending on your options used.
When you create the links using the Click Boxes, hopefully you used the option: Open other project. This means that when the user clicks, the other SWF/HTM or EXE (depending on output) will be launched.
I'm sure you will have other questions. So just post back either in threads of their own or by replying to this thread.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks
Similar Messages
-
Need help with multiple links in one Flash file
Hi, I have to do a banner which is basically 4 different
slides that fade up and down, but the client wants each slide to
link to a different place when the user clicks on it. I know how to
create an invisible button to link the whole ad, but how would I
link each slide? Thanks in advance!Am I getting no replies because this can't be done in Flash?
Is there a better way to do it? Actionscripts perhaps?
BTW, I'll have no access to the html page that the client
will be putting the swf file on so I wouldn't be able to put any
code around the file for linking, like if I did a bunch of jpg's
and found a script on the web somewhere that would fade them up and
down and link them. They want the linking built right into the swf,
is this even possible? Thanks in advance! -
Linking button from one flash file to a different flash file
Hi All,
Wondering if anyone knows how to link buttons in one flash
file to open a specific scene of an entirely different flash file?
If it isn't possible to choose a specific scene, is there a way to
just open a flash file...in the same browser window, but not within
the flash file...if that makes sense?
I'm putting this on a website, so additionally, I will need
to know which file to link it to, the swf, html, or fla.
Thanks!!I would advise against using scenes for your website. You
would need to create a separate html which would load the second
swf file within the same browser window.
This is how you call for it:
on(release){
getURL("
http://www.sitelocation.com/secondswf.html"); -
Making multiple projects into one SCORM
I have made multiple Captivate 5 projects that need to transform into one SCORM Module on my moodle LMS website, and count as one SCORM Quiz/Test. I've tried to even load multiple projects in one zip, but it failed to jump to the other projects when I had them all linked together leaving only this: "loading..." when I click the button to open project on the SCORM package. Please Help... Thanks...
I'm assuming here that your questions are related to the fields in the Quiz Preferences in Captivate.
The Objective ID is the same for all reporting elements in a given module. The Interaction ID Prefix just helps to distinguish which particular module your question data came from if you happen to be viewing it on drilldown inside your LMS. As long as it's not the same prefix as for other modules, it should be fine.
In the Multi-SCORM Packager dialog, the information you add to the fields will be written to the imsmanifest.xml file for the overall package:
Identifier is to provide an ID for your course that will be unique in your LMS. This will also be used to generate the filename of the final zip file.
Title is the name of the course.
Description may or may not be required by your LMS. Test and see. In some LMSs this info gets displayed to the user when viewing a synopsis of the course.
Version is the version of the package. I actually use the date reversed for my versioning (20110520a) with a letter on the end in case I output more than one version on a given day.
Duration is important to add. Some LMSs won't regard your package as compliant without this.
Subject is not something I've generally worried about, but it doesn't hurt to put a brief phrase on what the course topic material is about (e.g. Health and Safety) -
I recently received a PIXMA MG7520 for a gift. It works great with my lenovo laptop/tablet running on Windos 8.0. The one drawback to the HP all-in-one that it replaced is it does not have an ADF. That being said, there must be some way to scan multiple pages into one pdf file. I need help figuring thing out. Thanks in advance!
Solved!
Go to Solution.Hi mdtolbert54,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single PDF document. To do this, please follow these steps:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. Once all settings have been selected, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
7. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned items are saved in previously selected folder location specified in the SETTINGS... window.
If you find that you need advanced scanning options such as adjusting resolution, brightness, contrast, saturation, color balance, etc. in addition to the options selected above, please click on the SCANGEAR button on the IJ Scan Utility Main screen, then adjust the items as necessary.
Once the items above are set for document scanning, in the future, you will only need to launch the IJ Scan Utility, then press the DOCUMENT button to perform the scan (unless you want to make changes to the settings).
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
My Multiple Saves On A Flash File Gone? [URGENT HELP NEEDED]
Hey guys,
I am very disappointed with the fact that I've been working on a school project on a Flash file for numerous days, and yesterday, I was close to completetion when I found out that none my saves were updated. Basically, I spent hours working on the project and I saved my Flash file multiple times; however, I just opened my Flash file today and found out that all of the updates that I had made on the file were gone. Is there any way I can still recover the file/updates through cache possible, and what may have gone wrong?
What I have Tried To Solve The Issue:
- I have done a full scan of the computer but only found the non-updated file.
- I had dragged the saved file onto my USB the previous day before I turned off the computer, but the Flash file on the USB is the non-updated file as well.
- Try to find a cache, unsuccessfully.
- Browsed this forum but found nothing.
- I even checked my Recycling Bin.
Other Info:
- I am using Flash CS3.
- The folder which contained my Flash file has all of the images that I had edited with PhotoShop CS3, as well as the images that I had downloaded online. It's only the Flash file that is old.
Please help me out on this as soon as possible as it's a school project. My hours worth of time is gone and I really don't want to have to start again while there may be a solution to this out there. Thank you very much.You best bet is to get your san folks to give you some disk space for a mount point on the last node in the cluster. Once they assign the lun (not raw) have your SAs make it a mounted file system such as /dbbackup.
Run all of your rman backups on your last node on the cluster. The only draw back is, if that node dies, then you will not be able to run backups. but your backups would be safe as they are on the san.
Only way to have a mounted file system on all nodes in your cluser is to have some sort of third party file system cluster ware .. such as veritas or OCFS2 - then all nodes could see it.
I feel the first node in the cluster (the primary node) is the most busy out of the rest .. so thats why the suggestion of running rman on the last node in the cluster. -
How to download data in multiple sheets of one excel file
Hello,
I want to download data in multiple sheets of one excel file ..through ole2_object.
i have created program but it is not it is not giving the desird op.
here is the code..
create object excel 'EXCEL.APPLICATION'.
call method of excel 'WORKBOOKS' = books.
call method of books 'ADD' = book1.
*****************" Here we r creating the first sheet.
if flag1 = 'X'.
call method of book1 'WORKSHEETS' = SHEET
EXPORTING
#1 = 1. " here 1 indicating the position of sheet means first position.
call method of sheet 'Activate'.
set property of sheet 'Name' = 'Developments_Summary_Report'.
perform excel_fill.
endif.
*****************" Here we r creating the second sheet.
if flag2 = 'X'.
call method of book1 'WORKSHEETS' = SHEET
EXPORTING
#1 = 2. " here 2 indicating the position of sheet means second position.
call method of sheet 'Activate'.
set property of sheet 'Name' = 'BDC_Developments_Report'.
perform excel_fill.
endif.
set property of excel 'VISIBLE' = 1. " due to this property excel window is visible.
call method of excel 'QUIT'.
but it is generating the two different excel file ..
Thanks in advance,
Paresh.Hi,
Copy and paste this code in your SAP
*& Report ZETA_EXCEL_DOWNLOAD_CLIPBOARD *
report zeta_excel_download_clipboard .
include ole2incl.
data: w_cell1 type ole2_object,
w_cell2 type ole2_object.
*--- Ole data Declarations
data: h_excel type ole2_object, " Excel object
h_mapl type ole2_object, " list of workbooks
h_map type ole2_object, " workbook
h_zl type ole2_object, " cell
h_f type ole2_object, " font
gs_interior type ole2_object, " Pattern
worksheet type ole2_object,
h_cell type ole2_object,
h_cell1 type ole2_object,
range type ole2_object,
h_sheet2 type ole2_object,
h_sheet3 type ole2_object,
gs_font type ole2_object,
flg_stop(1) type c.
** Internal table Declaration
data: begin of t_excel occurs 0,
vkorg(20) type c, "Sales Org
vbtyp(20) type c, "Document Category
auart(20) type c, "Document Type
ernam(20) type c, "Created By
vbeln(20) type c, "Document Number
posnr(20) type c, "Item Number
erdat(20) type c, "Created Date
vdatu(20) type c, "Header Requested Delivery Date
reqdat(20) type c, "Request date
condat(20) type c, "Confirm date
lifsk(20) type c, "Header Block
txt30(30) type c, "Order User Status Description
lifsp(20) type c, "Line Block
dispo(20) type c, "MRP Controller
dsnam(20) type c, "MRP Controller Description
vmsta(20) type c, "Material Sales Status
kunnr(20) type c, "Sold To
cname(35) type c, "Sold To Name
regio(20) type c, "State
cufd(10) type c, "CUD
bstnk(20) type c, "PO#
bsark(20) type c, "Ordering Method
matnr(20) type c, "Material
maktx(35) type c, "Material Description
t200(20) type c, "T200
vtext(20) type c, "T200 Description
matkl(20) type c, "Material Group
zzbomind(7) type c, "BOM Indicator
ostat(20) type c, "Order Status
cmgst(20) type c, "CRD
inco1(20) type c, "Incoterms
oqty(20) type c, "Order Quantity
pqty(20) type c, "Open Quantity
unit(20) type c, "UOM
onet(20) type c, "Order Value
pnet(20) type c, "Open Value
curr(20) type c, "Currency key
so_bezei like tvkbt-bezei,"Sales Office
sg_bezei like tvgrt-bezei,"Sales Group
bname(20) type c, "Ordering Party
contact(20) type c, "Contact Name
telf1(20) type c, "Contact telf1
reqqty(20) type c, "Item Request qty
reqval(20) type c, "Item Request value
conqty(20) type c, "Item Confirm qty
conval(20) type c, "Item Confirm value
zzrev(02) type c, "Revenue recognition acceptance
bezei(20) type c, "Revenue recognition text
vgbel(20) type c, "Reference Order for RETURNS
0008text(255) type c, "Internal Order Comment Text
end of t_excel.
data: t_excel_bckord like t_excel occurs 0 with header line,
t_excel_bcklog like t_excel occurs 0 with header line,
t_excel_blkord like t_excel occurs 0 with header line.
types: data1(1500) type c,
ty type table of data1.
data: it type ty with header line,
it_2 type ty with header line,
it_3 type ty with header line,
rec type sy-tfill,
deli(1) type c,
l_amt(18) type c.
data: begin of hex,
tab type x,
end of hex.
field-symbols: <fs> .
constants cns_09(2) type n value 09.
assign deli to <fs> type 'X'.
hex-tab = cns_09.
<fs> = hex-tab.
data gv_sheet_name(20) type c .
* M A C R O Declaration
define ole_check_error.
if &1 ne 0.
message e001(zz) with &1.
exit.
endif.
end-of-definition.
t_excel_bckord-vkorg = 'ABC'.
t_excel_bckord-vbtyp = 'DEF'.
t_excel_bckord-auart = 'GHI'.
t_excel_bckord-ernam = 'JKL'.
t_excel_bckord-vbeln = 'MNO'.
t_excel_bckord-0008text = 'XYZ'.
append t_excel_bckord.
t_excel_bckord-vkorg = 'ABC1'.
t_excel_bckord-vbtyp = 'DEF1'.
t_excel_bckord-auart = 'GHI1'.
t_excel_bckord-ernam = 'JKL1'.
t_excel_bckord-vbeln = 'MNO1'.
t_excel_bckord-0008text = 'XYZ1'.
append t_excel_bckord.
t_excel_bckord-vkorg = 'ABC2'.
t_excel_bckord-vbtyp = 'DEF2'.
t_excel_bckord-auart = 'GHI2'.
t_excel_bckord-ernam = 'JKL2'.
t_excel_bckord-vbeln = 'MNO2'.
t_excel_bckord-0008text = 'XYZ2'.
append t_excel_bckord.
t_excel_bcklog-vkorg = 'ABC'.
t_excel_bcklog-vbtyp = 'DEF'.
t_excel_bcklog-auart = 'GHI'.
t_excel_bcklog-ernam = 'JKL'.
t_excel_bcklog-vbeln = 'MNO'.
t_excel_bcklog-0008text = 'XYZ'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC1'.
t_excel_bcklog-vbtyp = 'DEF1'.
t_excel_bcklog-auart = 'GHI1'.
t_excel_bcklog-ernam = 'JKL1'.
t_excel_bcklog-vbeln = 'MNO1'.
t_excel_bcklog-0008text = 'XYZ1'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC2'.
t_excel_bcklog-vbtyp = 'DEF2'.
t_excel_bcklog-auart = 'GHI2'.
t_excel_bcklog-ernam = 'JKL2'.
t_excel_bcklog-vbeln = 'MNO2'.
t_excel_bcklog-0008text = 'XYZ2'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC3'.
t_excel_bcklog-vbtyp = 'DEF3'..
t_excel_bcklog-auart = 'GHI3'.
t_excel_bcklog-ernam = 'JKL3'.
t_excel_bcklog-vbeln = 'MNO3'.
t_excel_bcklog-0008text = 'XYZ3'.
append t_excel_bcklog.
t_excel_blkord-vkorg = 'ABC'.
t_excel_blkord-vbtyp = 'DEF'.
t_excel_blkord-auart = 'GHI'.
t_excel_blkord-ernam = 'JKL'.
t_excel_blkord-vbeln = 'MNO'.
t_excel_blkord-0008text = 'XYZ'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC1'.
t_excel_blkord-vbtyp = 'DEF1'.
t_excel_blkord-auart = 'GHI1'.
t_excel_blkord-ernam = 'JKL1'.
t_excel_blkord-vbeln = 'MNO1'.
t_excel_blkord-0008text = 'XYZ1'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC2'.
t_excel_blkord-vbtyp = 'DEF2'.
t_excel_blkord-auart = 'GHI2'.
t_excel_blkord-ernam = 'JKL2'.
t_excel_blkord-vbeln = 'MNO2'.
t_excel_blkord-0008text = 'XYZ2'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC3'.
t_excel_blkord-vbtyp = 'DEF3'..
t_excel_blkord-auart = 'GHI3'.
t_excel_blkord-ernam = 'JKL3'.
t_excel_blkord-vbeln = 'MNO3'.
t_excel_blkord-0008text = 'XYZ3'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC4'.
t_excel_blkord-vbtyp = 'DEF4'..
t_excel_blkord-auart = 'GHI4'.
t_excel_blkord-ernam = 'JKL4'.
t_excel_blkord-vbeln = 'MNO4'.
t_excel_blkord-0008text = 'XYZ4'.
append t_excel_blkord.
loop at t_excel_bckord.
concatenate
t_excel_bckord-vkorg
t_excel_bckord-vbtyp
t_excel_bckord-auart
t_excel_bckord-ernam
t_excel_bckord-vbeln
t_excel_bckord-posnr
t_excel_bckord-erdat
t_excel_bckord-vdatu
t_excel_bckord-reqdat
t_excel_bckord-condat
t_excel_bckord-lifsk
t_excel_bckord-txt30
t_excel_bckord-lifsp
t_excel_bckord-dispo
t_excel_bckord-dsnam
t_excel_bckord-vmsta
t_excel_bckord-kunnr
t_excel_bckord-cname
t_excel_bckord-regio
t_excel_bckord-cufd
t_excel_bckord-bstnk
t_excel_bckord-bsark
t_excel_bckord-matnr
t_excel_bckord-maktx
t_excel_bckord-t200
t_excel_bckord-vtext
t_excel_bckord-matkl
t_excel_bckord-zzbomind
t_excel_bckord-ostat
t_excel_bckord-cmgst
t_excel_bckord-inco1
t_excel_bckord-oqty
t_excel_bckord-pqty
t_excel_bckord-unit
t_excel_bckord-onet
t_excel_bckord-pnet
t_excel_bckord-curr
t_excel_bckord-so_bezei
t_excel_bckord-sg_bezei
t_excel_bckord-bname
t_excel_bckord-contact
t_excel_bckord-telf1
t_excel_bckord-reqqty
t_excel_bckord-reqval
t_excel_bckord-conqty
t_excel_bckord-conval
t_excel_bckord-zzrev
t_excel_bckord-bezei
t_excel_bckord-vgbel
t_excel_bckord-0008text
into it
separated by deli.
append it.
clear it.
endloop.
loop at t_excel_bcklog.
concatenate
t_excel_bcklog-vkorg
t_excel_bcklog-vbtyp
t_excel_bcklog-auart
t_excel_bcklog-ernam
t_excel_bcklog-vbeln
t_excel_bcklog-posnr
t_excel_bcklog-erdat
t_excel_bcklog-vdatu
t_excel_bcklog-reqdat
t_excel_bcklog-condat
t_excel_bcklog-lifsk
t_excel_bcklog-txt30
t_excel_bcklog-lifsp
t_excel_bcklog-dispo
t_excel_bcklog-dsnam
t_excel_bcklog-vmsta
t_excel_bcklog-kunnr
t_excel_bcklog-cname
t_excel_bcklog-regio
t_excel_bcklog-cufd
t_excel_bcklog-bstnk
t_excel_bcklog-bsark
t_excel_bcklog-matnr
t_excel_bcklog-maktx
t_excel_bcklog-t200
t_excel_bcklog-vtext
t_excel_bcklog-matkl
t_excel_bcklog-zzbomind
t_excel_bcklog-ostat
t_excel_bcklog-cmgst
t_excel_bcklog-inco1
t_excel_bcklog-oqty
t_excel_bcklog-pqty
t_excel_bcklog-unit
t_excel_bcklog-onet
t_excel_bcklog-pnet
t_excel_bcklog-curr
t_excel_bcklog-so_bezei
t_excel_bcklog-sg_bezei
t_excel_bcklog-bname
t_excel_bcklog-contact
t_excel_bcklog-telf1
t_excel_bcklog-reqqty
t_excel_bcklog-reqval
t_excel_bcklog-conqty
t_excel_bcklog-conval
t_excel_bcklog-zzrev
t_excel_bcklog-bezei
t_excel_bcklog-vgbel
t_excel_bcklog-0008text
into it_2
separated by deli.
append it_2.
clear it_2.
endloop.
loop at t_excel_blkord.
concatenate
t_excel_blkord-vkorg
t_excel_blkord-vbtyp
t_excel_blkord-auart
t_excel_blkord-ernam
t_excel_blkord-vbeln
t_excel_blkord-posnr
t_excel_blkord-erdat
t_excel_blkord-vdatu
t_excel_blkord-reqdat
t_excel_blkord-condat
t_excel_blkord-lifsk
t_excel_blkord-txt30
t_excel_blkord-lifsp
t_excel_blkord-dispo
t_excel_blkord-dsnam
t_excel_blkord-vmsta
t_excel_blkord-kunnr
t_excel_blkord-cname
t_excel_blkord-regio
t_excel_blkord-cufd
t_excel_blkord-bstnk
t_excel_blkord-bsark
t_excel_blkord-matnr
t_excel_blkord-maktx
t_excel_blkord-t200
t_excel_blkord-vtext
t_excel_blkord-matkl
t_excel_blkord-zzbomind
t_excel_blkord-ostat
t_excel_blkord-cmgst
t_excel_blkord-inco1
t_excel_blkord-oqty
t_excel_blkord-pqty
t_excel_blkord-unit
t_excel_blkord-onet
t_excel_blkord-pnet
t_excel_blkord-curr
t_excel_blkord-so_bezei
t_excel_blkord-sg_bezei
t_excel_blkord-bname
t_excel_blkord-contact
t_excel_blkord-telf1
t_excel_blkord-reqqty
t_excel_blkord-reqval
t_excel_blkord-conqty
t_excel_blkord-conval
t_excel_blkord-zzrev
t_excel_blkord-bezei
t_excel_blkord-vgbel
t_excel_blkord-0008text
into it_3
separated by deli.
append it_3.
clear it_3.
endloop.
if h_excel-header = space or h_excel-handle = -1.
* start Excel
create object h_excel 'EXCEL.APPLICATION'.
endif.
* PERFORM err_hdl.
*--- get list of workbooks, initially empty
call method of h_excel 'Workbooks' = h_mapl.
* PERFORM err_hdl.
set property of h_excel 'Visible' = 1.
* add a new workbook
call method of h_mapl 'Add' = h_map.
* PERFORM err_hdl.
*GV_SHEET_NAME = '1st SHEET'.
gv_sheet_name = 'Back Orders'.
get property of h_excel 'ACTIVESHEET' = worksheet.
set property of worksheet 'Name' = gv_sheet_name .
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
data l_rc type i.
call method cl_gui_frontend_services=>clipboard_export
importing
data = it[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
* PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
* PERFORM err_hdl.
call method of worksheet 'Paste'.
* PERFORM err_hdl.
* CALL METHOD OF h_excel 'QUIT'.
*GV_SHEET_NAME = '2ND SHEET'.
gv_sheet_name = 'Backlog'.
get property of h_excel 'Sheets' = h_sheet2 .
call method of h_sheet2 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
importing
data = it_2[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
* PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
* PERFORM err_hdl.
call method of worksheet 'Paste'.
*GV_SHEET_NAME = '3rd SHEET'.
gv_sheet_name = 'Blocked Orders'.
get property of h_excel 'Sheets' = h_sheet3 .
call method of h_sheet3 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
importing
data = it_3[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
* PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
* PERFORM err_hdl.
call method of worksheet 'Paste'.
*--- disconnect from Excel
free object h_zl.
free object h_mapl.
free object h_map.
free object h_excel.
Regards
Sudheer -
Export multiple tables into one flat file
I have data in multiple tables on a processing database that I need to move up to a production database. I want to export the data into a flat file, ftp it to the production server and have another job pick up the file and process it. I am looking for
design suggestions on how to get multiple tables into one flat file using SSIS?
Thank You.Hey,
Without a bit more detail, as per Russels response, its difficult to give an exact recommendation.
Essentially, you would first add a data flow task to your control flow. Create a source per table, then direct the output of each into an union all task. The output from the union all task would then be directed to a flat file destination.
Within the union all task you can map the various input columns into the appropriate outputs.
If the sources are different, it would probably be easiest to add a derived column task in-between the source and the union all, adding columns as appropriate and setting a default value that can be easily identified later (again depending on your requirements).
Hope that helps,
Jamie -
How do i scan multiple pages into one pdf file
How do I scan multiple pages into one pdf file?
That depends on your scanning software. Adobe Reader doesn't scan.
-
Controlling one flash file from an embed one
I have built 2 flash files - one with all of the content, and
one with all of the menu buttons, (I did this so I can update the
"buttons.swf" file without having to edit the "content.swf" file).
I have no problem loading the "buttons.swf" file using the
loadMovie function, but I don't even know where to start when
trying to control the "content.swf" file.
The buttons should be able to control the gotoAndPlay
function of the "content.swf" file so they can control the pages
that appear in the "content.swf" file.
How would I go about doing this, and where would I need to
add the code? Into the "buttons.swf" file, the "content.swf" file,
both, or is it even possible?
Thanks
MikeHi Ned,
I'm using the attached code, where btnholder_mc is the
instance name of the box to hold "buttons.swf"
Using this code "buttons.swf" loads correctly, however, I
don't know how to make this movie control the gotoAndPlay function
of "content.swf".
I should mention that "buttons.swf" has 7 different buttons
within it, each of which I would like to load a different page
within "content.swf". I don't know if this is doable, but I'm
trying to do it as such so I only have to update 1 file full of 7
buttons, rather than 7 different files, each with their own button
(for the purposes of changing themes/design/etc.)
I know that if I loaded each individual button as a movie I
could place an onRelease listener to each to run the gotoAndPlay
function, but I want to avoid having 7 different button movies. Any
ideas? -
How Do You Write Thermocouple Readings From Multiple Channels to One Text File?
Hi Everyone,
I am having difficulty writing a Labview program that allows me to combine readings taken from 8 thermocouples to one text file. I am using a NI cDAQ - 9174 with NI 9219 modules.
Attached is a copy of my program thus far. I have figured out how to combine readings from 8 thermocouples to one waveform chart but the text file will infact be more vital.
I am very new to Labview and only require it for this task so the simpler the solution the better. Apologies for the lack of technical language.
Any help would be much appreciated.
AmyHere's one simple possibility...
Of course, this shows incomplete file handling, and you'll probably want to truncate your floating point values to a few decimal places. I have used this kind of operations for generating text and csv files for thermocouples, much like you are doing.
Good luck!
Dan -
Scanning multiple pages to one PDF file on HP PHotosmart 6525 printer
I tried the solution but there was no box near preview so I could change DPI to 300. Tried to scan 2 documents, no save button either. Help?
Hi nancynurse,
Welcome to the HP Support Forums! I see you are interested in scanning multiple pages to one single PDF file and be able to change the dpi settings. To better assist you can you please leave me with the following information:
1. What is the current Operating system you are running, Windows or Mac and which version?
2. Which solution was it that you tried with no success?
3. How are you scanning, with or without the HP Software?
I hope to hear from you soon so we can begin troubleshooting!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Linking other movie clips within one flash file
hey,
i'm making a flash tutorial for my company. I'm making each
section into a movie clip. so i'm wondering how to link from one
movie clip to another.
ok thanksIt's not confusing, there's just not enough information about
what you have designed already to be able to tell you what you can
do.
How will the movies be arranged in the Flash timeline?
If the movies are all going to be within the same Flash file,
then you will need to have buttons as the links you mention. You
can create your own so that they appear as text if that's what you
want. -
Scanning multiple pages as one pdf file
Hi Im using a Macbook Pro 10.9.5 and am trying to scan multiple pages and save as one pdf file. One suggestion is to use image capture. However, when I try to do this it says no camera or scanner is detected but it does not give me an option to copy multiple pages. Any suggestions. I have tried lowering the resolution but still have no luck.
Hi SusieG1026,
Are you sure to select file type Correct as text in image capture window? -
Multiple projects in one web role using Azure cloud?
How to run One webrole with multiple projects using azure?
In my solution One WCF service and ane website i want run both on one solution,
How to run both in one domain?
anilbabuThanks for replying,
I want to this type of output,
In my project one solution two projects(one website and one WCF service)
what i am asking is
this type
running both projects single service
http://postimg.org/image/oijwkbn7h/
After
i a hosting into azure that url's like this
How can i get this type of output
EX: http://multliplehos.cloudapp.net/
Service url: http://multliplehos.cloudapp.net/Service1.svc
anilbabu
Maybe you are looking for
-
Calendar items not showing ONLY in list view on iPhone
Weird: My Calendar items are not showing in the list view only, on iPhone. They show when I search, they show in month, they show in Day views--just NOT in list view. Ideas?
-
Deltas are not mooving to Next ODS
Hi,The process chain tirggered job is not updating deltas from one ODS to next ODS. Please help me to understand this. Thanks, Vasu
-
DB_HEAP access method with db_hotbackup utility
I open a Db handle with DB_HEAP access method and do nothing about it . When first created , the db file is 8kb , but after excuting db_hotbackup utility the db file is 4kb. if I do db_hotbackup under the failover environment , BDB give me an error m
-
Failed to load operational configuration
Dear support, I have an application which uses toplink grid. However, once I get the data from DB and would like to cache the data, it throws exception. Do you have any idea of the following stack trace? Seems that it is related to failure to load th
-
Elements Organizer 12 Has Stopped Working -- Why?
The program opens fine. Then, while sitting idle the organizer keeps crashing..... Why?