Multiple region printing to PDF (including charts)

Hi,
Has anyone created PDFs using FOP or Cocoon to print multiple report regions from a page. One of the regions I wanted to print to PDF is a chart !
Or is BI Publisher the only option ?
Thanks a lot
A

I do have the same problem..Gurus can you please help on this?.

Similar Messages

Multiple Region PDF's

I just finished installing BI Publisher and have successfully created pdf documents from reports. Now I have a page with multiple regions (4 to be exact). It seems that the printing options are on a region by region basis.
Is there a way to print a whole page as a PDF?? Ideally, it would be like a 'printer friendly' report (without tabs etc.) but contain the entire page not just one region .

Scott,
There's no print-friendly PDF version of a page. So you're right, it's on a region by region basis. There are however report queries available under shared components. Those report queries allow you to use RTF based report layouts, which can include multiple regions, combinations of regions and charts, and you can include the values of you application and page items, if you want to display those values in your PDF as well (e.g. form values).
You can find samples for RTF templates on the BI Publisher OTN site:
http://www.oracle.com/technology/products/applications/publishing/index.html
Regards,
Marc

How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
When I clicked the Save button it showed the page that I scanned and showed 1/1. On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
Not to mention HP's Customer Support is useless!
I'd appreciate any help I can get with this problem.
Thanks,
Mark

Hi BH,
I see your diagram. I just scanned something. The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram. The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram. I can't see the plus sign because it is not there.
I tried re-installing the software and drivers as you suggested but that did not have any affect.
Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
I've noticed that on HP's support forum web page there is only 1 solved request for assistance. That doesn't give me much confidence in HP.
Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
Thanks,
Mark

Print to pdf often doesn't work with multiple pages?

When I try to print to pdf, it often doesn't work right.
I can select, for example, multiple Excel worksheets to print. It looks fine with 4 pages in Preview, but when I select save as .pdf, it only prints 2 of the 4 pages, and it prints those in 2 separate documents rather than a single .pdf document with multiple pages.
Is there a way to do this? Is this an Apple error or Microsoft error? Since it looks fine in Preview, my guess it is an Apple error?
Mark

It sounds like this is the problem with the way Apple handles multiple orientations in a pdf document. You can use Acrobat to print the files - it handles multiple orientations correctly. There was a previous thread on this:
http://discussions.apple.com/message.jspa?messageID=1983431#1983431

How to print an excel file (2010 version) with multiple tabs into a pdf file with bookmarks (acrobat 9). I was able to do this easily using excel (2007 version).

Recently I got a new laptop, with excel 2010 version and acrobat 9 standard.
I could no longer print (save as) an excel file with multiple tabs into a pdf file with bookmarks.
My old computer has excel 2007 version and acrobat 9 standard.
Print an excel file into pdf with bookmarks was a piece of cake.
Both machine has the same add-in -- Acrobat PDFMaker Office COM addin
Thanks if anyone could help me with this.
Tom

You need to upgrade Acrobat to a newer version.
On Thu, Oct 30, 2014 at 4:12 PM, excel-pdf-bookmarks <

Report Title Displaying in Multiple Lines on PDF Format when i Print in PDF

Report Title Displaying in Multiple Lines on PDF Format when i tried to print in PDF Format, is there any limit for Report Title Characters
Displaying Like -
LRDP
Open
Label
Paradigm
Forecast
Report
Any Info Appreciated
~Srix

Got It .. Just need to chnage the Width Parameter.......!

Can no longer print multiple files from a PDF package

Prior to our upgrade to Acrobat Pro X, we had the ability to print multiple files within a PDF package. We would simply select the files we wanted to print, say print and it would print them all. It no longer does so, although it still allows us to select multiple files and to select ALL from the print menu but then it only sends the first file to the printer.
We have tried it on both Windows XP and Windows 7 and it won't work correctly on either one.
Does anyone have any ideas? This is very frustrating as these packages are created by folks bundling their e-mail messages to send to the fileroom for printing and filing in the official case files. With the old method we were able to quickly print out all the messages without attachments, and then would only have to individually print those messages that had attachments. As stands now if we get a package with 100 messages in it we will have to select and print each file individually instead of being able to print the 75 without attachments as one print job and then only have to do the seperate handling for the remaining 25 with attachments.
Any and all suggestions are welcome.

I'm using windows 7. The Acrobat that came with the Adobe Creative Suit 4 is Adobe Acrobat Pro. When I am on a web site that has a page in PDF I click on the printer icon and the print page comes up but the preview side is blank and will not print the page.

Printing to PDF - Acrobat Splits Into Multiple Files - ERROR

Good Afternoon,
I have an excel document of 20 tabs... when I print preview the document, I have twenty pages, and it prints as one document (20 pages.)
When I print to PDF (selecting Adobe as my printer) the Save As dialogue box comes up, as it should. After saving the PDF, it only saves half the pages in the file and a SECOND dialogue box comes up. The result is two PDF documents, each with half my tabs.
I have looked all over excel to find a reason this is... why would Adobe want to split my document for me? It is really annoying to have to combine the PDFs after the fact. What can I do to resolve this?

Excel (not Acrobat) creates separate print job when worksheets in a book have different page setup option.
So check the page setup options for each sheet in the book and ensure they are the same.

Printing multiple documents in single pdf on double sided printer

What is the best way to print a PDF document with a large number of documents so that the start of a successive document does not end up printing on the back page of the prior document? Each document has a cover page and could be used as a "key", but not sure how to set that "cover page" as the key which could then be used to instruct the printer to start on a new page - almost as if a new print job??

http://www.a-pdf.com/?product-mg
is a program which you can select a bunch of pdf files and combine them into one pdf. In the options pane , you can tell it to automatically add a blank page at the end of each odd numbered pdf file. You can simply then print the new combined pdf double sided on your copier, and it would print correct.
If you want to still have the pdf as separate pdfs, in Options you can select " bookmark by file name" before combining.
After combining, view the new pdf in Acrobat and you can 'split pdfs by top level bookmarks.

Prints of a pdf include the bleed after I alter things in illustrator? Can't understand please help.

I have been given a leaflet to adjust which is in pdf format. After alterations I resaved the pdf and printed a sample but the print now has a white border around it. Why have the dimensions changed?? Or what has happened?
Please help.

krisbkrisp,
Does the PDF look right on screen?
When you print from PDF in Acrobat/Reader, you should make sure that the print size of the contents is not reduced; depending on version, it may have different names (Print As Image or Zoom = 100% will give you fuill size, whereas Shrink oversizes pages to paper size or a Zoom level of less than 100% will shrink the contents).

When I print large PDF's of 10+ pages I get multiple duplicate pages.

When I print large PDF's of 10+ pages the print order goes in the following sequence.
Page 1, Page 1-2, Page 1-2-3, Page 1-2-3-4, Page 1-2-3-4-5 .... and continues in that fassion until the printer is out of paper.
When a smaller document prints it comes out fine like page 1-9 in sequesnce as it should. I am using Windows XP Pro SP3 fully patched and Adobe Reader X 10.1.3. This is very strange as there is only one machine in the office that is doing it and I have tried instalingin and reinstalling the printers and the Adobe readr in order to fix this and there isn't really anything that I can find that might be causing the issue.

While we all have MacBooks in this forum not all of us use Pages. There's a Pages Support Community where everybody uses Pages. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/iwork/pages

Printing to PDF broken after installing a font manager

I'm currently trying to figure out why after installing Extensis suitcase printing to PDF is broken. I have tried the following fixes that I have seen so far
I have gone into distiller and removed the other font locations in there and just supllied windows\fonts
I have gone into control panel regional and language optionss and checked the install files for complex script
I have gone into pdf printing options and unchecked the rely on system fonts only
I have also gone through and removed and readded the windows font files. However if the adobe fonts are removed it makes the distiller window huge and can't be restore even with removing and reinstalling acrobat.
Using the above I have gotten two pc's to work but the third continues to give me the following error.
%%[ Error: invalidfont; OffendingCommand: findfont ]%%
Stack:
/Font
/Courier
/courier
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Currently the system is using acrobat 9 pro and extensis suitcase 3. I'm not sure where to go from here, I have tried to find any related posts but I have seen anything that I haven't already tried. Let me know if anyone has any ideas or needs more info.
Thank you

I am not very good at reading the Distiller error message. However, it is saying a font can not be found. Temporarily, go into the job settings file and select warn and continue or ignore for the embedding fonts warning. The default typically is set to fail. After you get a PDF, check to see which font is giving you problems. The fonts have to be included in Distiller or you will get this error and failure of you do not have one of the first two options selected. Don't know if that will help, but it is something to look at.

Can Automator Print to PDF?

I want to create a workflow that includes printing a selected file to a PDF. But Automator can't seem to do it. The one command that looked the most promising, "Save as Adobe PDF" won't load. Every time I try to add it to the workflow I get an error message reading "The action 'Save as Adobe PDF' could not be loaded because it is not Universal."
Is there any way to get Automator to print a file to PDF?
Is thre some 3rd party PDF printer I could add to my Printers that it culd then access?

I wonder if this will work for you. I found this in Automator's help:
Process PDF files from the print dialog
You can run a workflow on a PDF file in the Print dialog by saving the workflow as a print plug-in. You can then choose your plug-in from the PDF pop-up menu in the Print dialog. This is useful if you want to do changes to multiple files when printing.
Some sample printing workflows are included with OS X in the Scripts folder inside the Library folder.
Open Automator
Choose File > New.
Click Print Plugin.
Click PDFs in the Library. You can now drag PDF related actions into your workflow.
When you save your finished Print-plug in, you can use it from the print dialog from the application you are printing from.
Choose File > Print. Click the PDF pop-up, then choose Edit Menu, and select your workflow.

Acrobat PDF 8 printer missing pdf options

I have seen this discussed in a few places, but have never come across a fix that works for me. Basically when trying to print to the pdf printer, the pdf options is not available in the drop-down of printer settings. This is affecting about 10 of my machines at different sites.
I have tried removing the ppd and letting Acrobat repair it. I have also tried multiple other suggestions to change the permissions of the ppd file. the other method I have tried is to remove the pdf preferences from ~/Library/Preferences.
I am running 10.4.11 on all of these machines with the latest version of Acrobat 8 professional.
Thank you for any help you can provide!
-Ken

I've been playing with this for a couple of months now and haven't got any closer to a solution. It is not application specific. The problem can be seen when printing from any application to the Adobe PDF 8 printer.
The only thing I can think of that may be different is that I modified the Adobe installer to include the volume serial number for our organization.
Things I have tried that have not worked:
* Cleared caches, preferences, fixed permissions, verified no disk problems
* removed PPD, and PDF plugins from /Library/Printers/PPD\ Plugins/ and /usr/libexec/cups/backend/pdf088
* removed preferences and application support files from /Library and ~/Library
* Let Acrobat repair everything
* Reset print system
* Ran all updates
* Manually uninstalled CS3 and re-installed
I have the same problem on Leopard, but I am able to fix it by fixing the two aliases located in ~/Library/Preferences/com.adobe.print/AdobePDF8/Aliases/ Or just simply delething them and letting them regenerate.
I know more people out there are having the same problem, I just don't see any answers out there that actually work.
Thank you,
Ken

Multiple regions

Hi
If you have reports in multiple regions, Is it possible to print all the reports at once instead of indivdually in their respective region.
Marco

Hi Dimitri,
I've done that on my OTN workspace app. I created the report query using "select empno, ename from emp order by 1". Did a page button and got the pdf as I would expect. I then went back and added a second query "select deptno, dname from dept order by 1", applied changes to save the query and again to save the report query. Went back to my page, and the pdf still only shows the emp report. Went back to the report query, the second select statement is definitely there but even the Test button only shows the emp query. Is there something else I need to do?
Andy

Multiple region printing to PDF (including charts)

Similar Messages

Maybe you are looking for