Multiple Sender agreements

Hi!
I want to send the same file but with two different sender communication channels.
Everything in the configuration is the same but I want to use one filesender adapter and one of another kind for the same integration.
Is it possible?
Best regards

Hello Sonny,
We could not create two duplicate sender agreement even thought the communication channels are different.
if you want to use two different Communication channel for same file then create another copy of sender interface .(rename original one)
like sender_agreement1 and sender_agreement2 then in this canse you can create your two different sender agreement with two different CC we need atleast.
If receivers are different then you can use vertual receiver option to create it.
I hope this will help you!!
Monica
Edited by: monica bhosale on Aug 25, 2011 3:52 PM

Similar Messages

Multiple sender agreements mean multiple receiver detr??

I have several JMS Channels that will be process thru one BPM. Is there a way to combine the JMS Channels into one or several
Sender Agreements / Receiver determination? Or will multiple Config's be required?
Thank you.

Parimala,
<i>Would I need 70 receiver determination records?</i>
Unfortunately you will have to do that
Reason: Receiver Determination is associated with SENDER INTERFACE and as you have 70 SENDER INETRAFCES / 70 SENDER AGREEMENTS, you wil have to have 70 receiver determination.
Just look into the possiblity of cutting down on the number of Communication Channels and cominbing all 70 comm channels into a lesser number.
Regards,
Bhavesh

Sender agreements on high availability setup

Hi
We have XI and ERP exchanging some messages. Our ERP system has been switched to high availability setup.
As for one scenarion in XI: ERP is sender and there is ONE sender agreement that can use ONE communication channel (RFC).
In that communication channel, "RFC Server Parameter" is configured for one of the app servers. "RFC Metadata Repository Peremeters" are set to point to the load balancer.
What happens is that this scenarion can be started only from this app server that is configured in the communication channel.
How to enable that both ERP app servers could be th senders for this scenario?
I am missing something obious...
Thanks,
Heiko

This seems strange for me too. But if I set the RFC Message server and Metadata server to use the same system, the connection will not work.
It seems that there are two possible ways:
- change communication channel so that it would not be app server specific. Tried but don't seem to figure out how this should be configured.
- add multiple sender agreements. XI dos not allow multiple sender agreements... requires different receiver... but there is no receiver at all.
Any ideas?
Heiko

Problem with Sender Agreement for EDI File to Idoc scenario

I'm configuring PI for EDI with Seeburger Adapter (Calling as a Module) and I'm having an issue with the Sender Agreement using File Adapter.
Process used is File to IDOC. EDI data will be picked up from VAN (Using existing FTP process rather than using Seeburger FTP) and stored in a folder which is being accessed by PI to send to R/3 to create orders.
All my inbound EDI will be stored in same folder which should be picked up by XI and distribute the same depending upon the respective scenario's in ID and respective mapping/config in IR.
The whole process IR & ID works fine and also creates Idoc in R/3, if I configure for one customer for EDI 850, but when I try to configure for second customer for same EDI 850 having same ANSIX12 version (V4010) as previous customer, I get stuck at the Sender Agreement part for this second customer because I use the same CC for File read for both the customers (Scenarios) and since there is a limitation with File Adapter "sender channel must not be assigned to more than one sender agreement ".
How can I create the Sender Agreement using the same CC for my other scenario?
I tried creating multiple CC for different scenario but when I place a test file for customer A, I see that its being picked up by both CC's.
Pl Advise.
Thanks!
PSR

You need to configure splitter as module in sender file adapter (classifier->bic->splitter) as well as define a message splitter(with partner number and Seeburger mapping) in Seeburger workbench.
Thank you for the reply Aamir,
Do you have any document which can guide me through the process?
Does Seeburger Workbench play any role here? because I'm not using See FTP adapter to connect to my VAN. We get the data from the VAN using FTP process but not using See FTP. I'm using BIC to generate an XSD and SDA file, rest everything is in XI using File to idoc and IDOC to file process.
Thx
PSR

Regd. error in sender agreement(when to check sender uses virtual receiver)

hi Experts,
I am doing a file( SFTP adapter ) to IDOC scenario.
I got an error :
Couldn't retrieve inbound binding for the given P/S/A values:FP=XYZ;TP=;FS=XXXX;TS=XXXX;AN=XXXXXX;ANS=;
I checked my sender agreement and saw some "*" symbol displayed at the end on SA name.
To quick fix it and remove the star symbol'', i have just created SAgreement again and this time i checked "Sender uses virtual receiver " and revomved thestar symbol '' and saved without mentioning anything there.
When i tested it worked! but i want to know what made it work, is it the right practice.
i did a lilttle search on when to use "sender uses virtual receiver" option.i came to an understanding that it is mainly used to handle multiple input file formats in a single configuration scenario.
one more qns:
What are marketplace adapters,is this error comes when we use adapters which are not inbuilt or bought from external vender.
Regards,
Anika
Edited by: Anika Gulati on Jun 10, 2009 1:23 PM

Here are few ways for it...
SAP Process Integration: When to Use u201CSender Uses Virtual Receiveru201D in a Sender Agreement
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40cb67f7-6464-2b10-bcb9-8edb9a3569f9
SAP Network Blog: Virtual Receiver - Why do you 'really' need it?
/people/shabarish.vijayakumar/blog/2008/09/16/virtual-receiver--why-do-you-really-need-it
-SM

Sender agreement at what stage ?

Hi
The two objects of collaboraton agreement are Sender agreement and Reciever agreement. Receiver agreement takes place at the call adaper stage of the XI pipeline. I want to know when the Sender agreement takes place ? Does it happen before receiver determination, the first step of XI pipeline or dooes it happen in any of the pipeline steps ?
Ajith

Hi Ajith
Your pipeline steps follow this
SA
RD
ID
RA
Sender -> CC(SA) ->IS (RD-ID)->CC(RA)-> Receiver
It is not required for Sender IDOC, HTTP, XI, SOAP, MAIL
For these SA is not required as IS take the default properties.
But when you have multiple Adapter engine running on the same PI box then you may need to create mulitple sender agreement on same system. With various key parameters.
For some security reasons also we need to create mulitple sender agreements. Whenever you are dealing with adapters where SA is not required it is always leveraged on RA.
Thanks
Gaurav

Any possiblity to use single Inbound Service Interface with multiple Receiver Agreements

Hi All,
Scenario: PROXY to FILE.
Requirement is to receive to two locations.
Is it possible to use single Inbound interface with multiple Receiver Agreements. I tried using two operation in the Inbound Service Interface, and Operation Specific in Determination. But couldnt proceed further. Do I need to use seperate Service Interface for two receiver locations?
Please suggest some solution.

Hi Naveen,
There is a possibility but in the case in the same server location with dynamic configuration: Placing file in two different directories using single receiver communication Channel
With different location you would need to develop a new adapter module as Amit Srivastava explains and develops here Send File to Two Different Locations using Adapter Module
Regards.

Multiple sender file

Hi,
I have a file to file scenario a bit particular.
There is a unique receiver file communication channel.
Howerver, I must to create multiple file sender communications channels because sender ftp servers are different (and very numerous ! ).
There is any way to avoid configurate so many receiver determination and interface determination, to implement a multiple sender scenario ?
Thanks, in advance

Hi, Udo,
I'm trying your solution, but I must have an error and i don't find it.
In an scenario N senders (N business service) to 1 receiver (business system called TPV):
Receiver Determination
Sender service : *
Sender interface : MI_OUTB
Receiver party :   (none)
Receiver service : TPV
Configured receivers: Service TPV
Interface Determination :
Sender service : *
Sender interface : MI_OUTB
Receiver party :   (none)
Receiver service : TPV
Inbound interface: MI_INB
Receiver Agreement :
Sender service : *
Receiver party :   (none)
Receiver service : TPV
Receiver interface: MI_INB
Also I have created several Business Services with CC and Sender agreements.
And I have 2 problems:
Receiver determination doesn't recognize Interface Determination and REceiver agreement in Configuration Overview
Error RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC in Monitor.
Please, I need your help.
Thanks, in advance
Carme

Error while publishing Service from Sender Agreement

Hello Experts,
I have Enterprise Service Scenario in which i am publishing Enterprise Service from Sender agreement (using SOAP Sender adapter).
When i am trying to publish this Enterprise Service i am getting below Error.
Adapter Engine XXXX for communication channel XXXX not registered in SLD.
Can someone please help me solve this error?
Thanks,
Hetal

Hi.
Pleas check the following threads
how to check adapter engine was registered in SLD or not?
No Adapter Registered for this channel
Regards
Lucho.

Error While activating Sender agreement having WS Sender Adapter.

Hi all,
I am very new to this technology. I have done Demo example Agency. I configured all the objects. While activating sender agreement having WS adapter as sender adapter, I am gettign the following errors.
1. Field Receiver Communication Party has the value "*"; adapter type WS of communication channel GeneratedSenderChannel_WS does not allow generic key field values
2. Field Receiver Communication Component has the value "*"; adapter type WS of communication channel GeneratedSenderChannel_WS does not allow generic key field values
3. Interface FlightSeatAvailabilityQuery_Out | http://sap.com/xi/XI/Demo/Agency is compatible with SAP NetWeaver 2004 (XI 3.0). Business system GeneratedSenderChannel_WS does not support Web service communication using XI 3.0-compatible interfaces
Can any body solve my problem?? where exactly problem lies??
Regards,
Pavani

hi pavani,
pls see this link.it may help you.
http://****************/Tutorials/XI/XIMainPage.htm
http://209.85.207.104/search?q=cache:fC2GF0rQ6WMJ:www.sap-press.de/download/dateien/1191/sappress_exchange_infrastructure.pdfErrorWhileactivatingSenderagreementhavingWSSenderAdapter%2B+sap&hl=en&ct=clnk&cd=1&gl=us
chk each n every step once again. this may happen due to not checking of generic fields.
thanks
klarthik

ERROR in PI : No sender agreement found for , , , , ,

Hello everybody,
i'm working with SAP PI 7.1
it's a new installation.
I created the first easy interface JDBC-Pi-File.
when i activate the CC i don't see any message in SXMB_MONI but in RWM i see the messages in Waiting status and when i look inside i see the follow error:
SOAPFAULT received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_CSIS_DEV, http://xxxx.com/test, SI_DB2SP_DOCUMENTS_AA_02; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_CSIS_DEV, interface namespace http://xxx.com/test interface SI_DB2SP_DOCUMENTS_AA_02 No sender agreement found for , , , , ,
1-Configuration is ok. I create all steps and sender Agreement exist
2-end point http://yyyyy:50100/sap/xi/engine?type=entry is correct and the same in SLD and sxmb_adm -> Integration Engine Configuration
3-i suppose 50100 port is correct because when i try to use 8010 port i have a different error.
4- i alreadi used CPA cache refresh and SXI_CACHE.
Any suggestion?
thanks

after 20 minuts i retry.
Now the error message is changed:
Transmitting the message to endpoint http://yyyyyy:8010/sap/xi/engine?type=entry using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection refused.
Edited by: apederiva on Aug 25, 2010 11:35 AM

Sender agreement not updated in XI cache after commit

Hi all,
somehow none of my created sender agreements appears in the XI cache after commit. I also did a complete refresh of the XI chache.
Any ideas?
Thanks!
Denis

Hmm,
I have created sender agreements for SOAP channels, this would explain why I could not see the agreements...
Actually I am wondering why the 'test configuration' tool in the ID brings up an 'java.io.IOException' in the receiver determination. Prior to that the sender agreement lookup fails. So I thought it's the XI Cache...
I restarted the J2EE engine but the problem remains.
Any other ideas?
Thanks so far!

What's the usage for WSDL of sender agreement?

Hi gurus,
Our scenarios are using soap sender adpater, and we find in PI 7.11 there is a functionality to display the wsdl of sender agreement.
It seems xmlspy can create soap request based on the url format of wsdl, but we can't send the soap request to PI as it gave the error message as below " Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=null;TS=;AN=null;ANS=null;".
Do we have to use the "TOOLS->display wsdl" menu to get the wsdl file to local and then provide it to 3rd party system? If so, we have to export wsdl again whenever data structure changes.
Thanks in advance.

HI,
Do we have to use the "TOOLS->display wsdl" menu to get the wsdl file to local and then provide it to 3rd party system? If so, we have to export wsdl again whenever data structure changes.
---->yes ,we have to export wsdl again whenever data structure changes.
and
we have 2 approaches for generating WSDL FILE
1. in sender Agreement
2. from memu bar-> tools
but we have to generate WSDL file Through Menu bar "TOOLS" because there is chance to provide url and sender details after change the Structure..,..
thanks,

Processing the multiple sender xml one by one in a time gap to RFC

Dear Experts,
I have to process the multiple sender xml file one by one from FTP to RFC in time gap.
For Ex:
I will place 10 xml file in a FTP path at a time, PI is picking 10 file at a time and process it to RFC at a time.
Any other way to process the multiple file one by one through PI in a time gap to RFC
(i,e) PI needs to process the 10 files one by one, once the first file processed successfully from FTP to RFC then the next file to process in a time gap to avoid getting the error in RFC.
Kindly suggest your ideas or share some links how to process this multiple files.
Best Regards,
Monikandan.

Hi Monikandan,
You can use CE BPM with PI 7.1 But first check the suggestion of Anupam in the below thread:
reading file sequentially from FTP using SAP PI file adapter
Regards,
Nabendu.

Sender Agreements for HTTPS

Hi
I am aware that there that there is no Sender Agreement necessary for sender Http scenario, maybe a silly question but why in that case is there a Sender option on the HTTP communication channel ?. Also for HTTPS if there is no sender agreement (hence no Communication Channel) then where can HTTPS be assigned as the Security Level on the channel, i.e. the "Security Check for Incoming Messages option".
Thanks
Damien

Hi!
According to my knowledge in XI there the HTTP Sender service is in disable and eventhough u can create in XI. but now in Latest version like PI 7.1 the service is enable
In mostly in some real time projects there are some requirements like they need some security purposes in that cases mostly they need a Sender agreement mandatory for security purpose.
Inorder to satisfy these requirements they are configuring HTTP sender and hence Sender agreement and but they are selecting as HTTPS protocol and while selecting HTTPS protocol kindly note one point that your network Firewall settings needs to be in open and they needs to all the flow of messages.
I hope now you are free from confusion.
Regards:
Amar Srinivas Eli

Multiple Sender agreements

Similar Messages

Maybe you are looking for