Multiple T Codes to check User Authorization

Dear All,
I had requirement to check the list of tcodes assigned to the users.
Here the input is multiple tcodes(i.e, more than 10 tcodes).
Please provide your inputs / suggestions in this regard.
Regards,
Venkatesh

Hi Venkatesh,
You can use join the below mentioned tables using SQVI transaction and generate the report as per your requirement:
Table Name:
1) AGR_1251
2) AGR_USERS
You can refer the below mentioned document on how to prepare report using SQVI transaction:
How to create Report by using SQVI
Regards,
Hardik Patel

Similar Messages

Ultiroute says "Check user authorization"

My Ultiroute has suddenly started giving me a "Please check your User Authorization" error message when I try to route a board. Ultiboard runs fine, the internal rip-up router seems to be OK, but Ultiroute won't run any more. I can't find any way of dealing with this. The software is Ultiboard 2001 SP2.
Thanks!

Hello,
You should be able to use the same Release Code if your hardware configuration hasn't changed; anyway if for some reason you have issues with this, just use the Online Release Code Generator to get a new code.
Ultiboard/Ultiroute 2001 are products that we don't support anymore, therefore I won't be able to tell you what caused this error.
Did the re-install work?
Are you using a hardware dongle?
Operating system?
Ultiboard version (Personal, Pro)?
Regards,
Fernando D.
National Instruments

Check users authorizations and role

Hello!
How can I check the authorizations of
Web Dynpro application users and also his role.
Thanks
rgds
sas

HI,
Pl go through Following link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/web%20dynpro%20security.pdf
https://help.sap.com/javadocs/index.html
use the method isMemberOfRole.
Regards
Ayyapparaj

Check user role/authorization during Web report run-time?

Hello again,
I ran into a problem. I need to check <b>user's authorization during webtemplate execution (run-time)</b>. I want to have a possibility to allow in one web template extra functionality (through template menu) to key users. Normal users, who are running same report, should not have this extra menu visible.
Is it possible to check user authorizations or roles during web-template run-time?
Thank you!
Vitaliy

Hi Harinam,
From my logic your are right.
The restriction is in two new roles (Requestor and Approver role).
But ->
If I assign my approver role the selection possiblities of the request types during the AR creation is restricted and the AR search function does not work.
If I assign my requestor role the restriction of the request type is not there, but the AR search function works again. :-(
If I assign the original approver role of sap I have the same behavoiur for the AR search.
Both new roles are a 1:1 copy of the SAP standard roles - > Exception, ristriction on request type 'Execption Approval' is not displ.
I have execute ST01 now. If I try to open the log, the system syst "No records that correspond to these search criteria".
But I have found something else.
The problem appears only if I search for Process ID "Access Request Approval Workflow".
If I select other Process ID such as "Control Assignment Approval Workflow" or "Fire Fighter Log Report Review Workflow", everything works fine.
Very strange!
BR
Melanie

Error for customer specific Authorization check (User Exit)

Dear Experts,
I am facing a problem in PM.
I have created a maintenace plan for calibration via t code IP42 and mentioned the order type PM05. Scheduling is done for the order. I got the order number.
I have released the order and got the inspection lot number.
While entering the results recording through t code QE17, the reluts are out of the specified range, i have given the valuation Rejected, immediately system is giving an error message as below:
"Error for customer specific Authorization check (User Exit)"
Though there is no user exit activated in the system, this message is coming and not allowing the result recoring for rejection.
If I'm entering the result recording within the specified range, then valuation is Accepted and its allowing to save.
I have checked the following user exits:
QQMA0002: QM: Authorization Check for Entry into Notif. Transaction
QQMA0026: PM/SM: Auth. check when accessing notification transaction.
The above 2 User Exits are not active.
I have also checked a note 429066. But it says incase of any dump for that user exit only its applicable and more over the current version of the system is ECC 6.0 packae 15, where as that note is applicable upto 4.6C.
Please some one help me on this issue.
Thanks and Regards,
Praveen.

Dear Pete,
I have cheked with my technical team, There is no hotpacks updated recently. This is the implementaion project I'm in, so performing the cycle for the first time.
Any how I got it solved, in T code QE17, after entering the Inspection lot in next screen goto menu path Settings - User settings - Defects recording mention the reprt type and tick on Reprt type Changable.
At the time of result recording if the valuation is Rejected then it ask for defects recording close that window if not rwequired then save, the error message no longer apperaing now.
Regards,
Praveen

Code for user authorization

Hello All,
I have to implement a sample code which will filter out activities according to user authorization. Please help me in this regard.
Thanks in advance.
Paul.

Hi,See the below code and write as per your need.
INITIALIZATION.
AUTHORITY-CHECK OBJECT 'ZPRCHK_NEW'
           ID 'TCD' FIELD SY-TCODE
           ID 'BUKRS' DUMMY
           ID 'PRCTR' DUMMY
           ID 'SPART' DUMMY
           ID 'WERKS' DUMMY
           ID 'VKORG' DUMMY
           ID 'EKORG' DUMMY.
IF SY-SUBRC NE 0.
    MESSAGE I000(VZ) WITH TEXT-002 SY-TCODE .
    LEAVE PROGRAM.
ENDIF.
Regards
rajendra

Document search error in webshop(Error in authorization check: user unknow)

Hi All
actually we have implemented the document search functionality in webshop to access all the documents in webshop who have created order in the webshop.
actually when i am logging into the portal with userid "skumar" after that there was role called "Document Search" when i click that document search role then the document search will be opened, based on the selections in the selection criteria then the documents will be displayed generally.
actually come to my error when i select in the selection criteria "order acknowledgement" and i select the one more column called "period" after that i click the search button then i am getting the error as follows.
<b>Error in authorization check: user unknown.</b>
Can you please help me where to check the authorizations in the system for accessing the documents.
Regards
Sunil

Hi Sunil generally this kind of error will occur when you choose acknoledgement
for Future Periods,eventhough input is past date if the same problem occurs you should check for Su05 Internet USer authoriasations
Reward if helpful
Venkat

User authorization check in report

Hi All,
I want check user name in report while event (at user-command) trigger.
Have 2 buttons in report A.Process B. Display.
any user can press display button. but some of the user only can press Process button.
how can I do this using authorization objetcs.
I donot want to check by sy-uname, because I donot want to hardcode user names.
Thanks & Regards
Gupta......

Hi,
You need to ask to BASIS guy to create the authorization object.
Whenever user clicks the button PROCESS in PAI of that screen you need to write the authority check statement.
For example if i need to validate the country for the particular user :
MODULE user_command_9000 INPUT.
*Authority Check for Country*
AUTHORITY-CHECK OBJECT 'ZO9_CNTRY'
    ID 'COUNTRY' FIELD g_soldto_country.
if sy-subrc ne 0.
     clear g_ok_code.
     message E001(ZMESSAGE_AS) with g_soldto_country.
endif.
I hope this will be useful to you.
Plz reward if useful.
Thanks,
Dhanashri

Error Message code 1900 in syntax check and code LV_ERR in user interface

In my webdynpro component when i did the code inspector check i have an error message in syntax check
which says "Message code 1900: ObjectType WDYN Object name ZXXXX Row 1 Column 0 the size of the PXA buffer reached a critical value at 158 percent. The maximum size is currently 4,194,304 bytes ==> The size of the PXA buffer reached a critical value at 158 percent. The maximum size is currently 4,194,304 bytes.
Another Error message in user interface
which says: "Message Code LV_ERR:ObjectType WDYN Object name ZXXXX Sub-Object Type Sub-Object Name Error Load unit of component is very large (generation limit).==> Error Load unit of component is very large (generation limit) .
Please help in resolving these issues.
Thanks in advance.

Hi,
you need to discuss with the basis team to increase the abap buffersize.
there is a parameter in the transaction rz11.
go to RZ11 and then wirte parameter as abap/buffersize
check its value.
if you increase it, problem will be solved i guess.
thanks
sarbjeet

USER AUTHORIZATION FOR T-CODE OB52 & OKP1

Hi Experts,
I would like to know if there is a t-code that assigns USER to open another t-code.
OB52 & OKP1?
I want to restrict this t-code for only few users....
Is it possible?
Need advice plese
Rey

Hi Rey,
As per my knowledge the authorizations will be done by BASIS consultants.
R.K

I lose the 'authorization' tab in PFCG T-CODE on particular user

hai sap guru's ,
i lose the 'authorization' tab in PFCG T-CODE on particular user . (if i use PFCG in particular user i loose authorization tab)
how can i solve this problem ?
thanks & regards
sathish.

hello
i suggest to make profile parameter
"auth/no_check_some_in_cases = Y or N "
it will help you.
then authorisation tab will be appear
regards
Ramesh

Want a code to check & install JRE automaticallly without user intervention

hi
I am trying to run an applet on a machine that is not having JRE on it.
want a code that will check for such condition and install JRE automatically.
If JRE is already present then it should check for required version and enable it also.
please help in this regard.
thanks in advance
Santosh.

The ability to detect the jre at the update level, as well as the ability to install a specific version are only present if the DT plugins are installed.
These plugins only exist for windows and are only part of the 6u10 (1.6.0_10) versions of java.
The javascript you show uses an undefined minimumVersion variable.
also note, you cannot use the wildcard '1.5.0*' in the call to isWebStartInstalled (which takes minimumVersion arg)
if fixed, this code would still not work as you want, since clients with 1.6.0 or later would sail straight thru and launch.
I suggest replacing isWebStartInstalled() with deployJava.versionCheck('1.5.0*') .
then on systems with the plugin installed, if no 1.5.0* version is installed, the latest 1.5.0_XX will be installed before launching the app.
(assuming the app has also <j2se version=1.5/> or equiv.)
on systems w/o plugins installed, the latest version of java will be installed, and it will be up to javaws auto download to get 1.5.0* version.
this could still have problems, especially on platforms not supporting the plugins (non-windows) , since code keeps checking for '1.5.0*', and installing only latest, so you would want to wrap install with something to prevent repeated attempts to install:
if (deployJava.versionCheck('1.6.0+') && !deployJava.isPluginInstalled()) {
---- don't do any install here - ---
/Andy

Need to add multiple company codes to user accounts.

I am new to SRM 5.0. I have been asked to add all Non-US company codes for two users. Do I have to add it through PPOMA_BBP - under attributes-- select company code and add it there. If so, I have at least 35 Non-US company codes to add. I cannot select them all. Do I have to add them one by one. Or is there any other process? Please advise if I am doing it correctly.

Hi
If it is specific to the two users then you need to assign one by one this is the only why. But if it for then you can maitain that root leve.
regards
satish

ABAP Code To Authenticate Users

Hi,
How can I code a ABAP program/function which will authenticate a user based only on their user id? Do not want to use their password.
I want the entire authentication process to happen in the ABAP code.
Any ideas?
Thanks,
Audrey

Hi,
To check the authorization of the user of an ABAP program, use the AUTHORITY-CHECK statement:
AUTHORITY-CHECK OBJECT '<object>'
                        ID '<name1>' FIELD <f1>
                        ID '<name2>' FIELD <f2>
                        ID '<name10>' FIELD <f10>.
<object> is the name of the object that you want to check. You must list the names (<name1>, <name2> ...) of all authorization fields that occur in <object>. You can enter the values <f 1 >, <f 2 >.... for which the authorization is to be checked either as variables or as literals. The AUTHORITY-CHECK statement checks the users profile for the listed object, to see whether the user has authorization for all values of <f>. Then, and only then, is SY-SUBRC set to 0. You can avoid checking a field by replacing FIELD <f> with DUMMY. You can only evaluate the result of the authorization check by checking the contents of SY-SUBRC. For a list of the possible return values and further information, see the keyword documentation for the AUTHORITY-CHECK statement. For further general information about the SAP authorization concept, refer to Users and Authorizations.
There is an authorization object called F_SPFLI. It contains the fields ACTVT, NAME, and CITY.
SELECT * FROM SPFLI.
   AUTHORITY-CHECK OBJECT 'F_SPFLI'
                        ID 'ACTVT' FIELD '02'
                        ID 'NAME' FIELD SPFLI-CARRID
                        ID 'CITY'   DUMMY.
   IF SY-SUBRC NE 0. EXIT. ENDIF.
ENDSELECT.
If the user has the following authorizations for F_SPFLI:
ACTVT 01-03, NAME AA-LH, CITY none,
and the value of SPFLI-CARRID is not between "AA" and "LH", the authorization check terminates the SELECT loop.
Hope it helps u.
Thanks&Regards,
Ruthra.R

CRM Analytics - User Authorization Not Suficient

Hi Guys,
We have implemented the CRM analytics report, however when I access the menu Sales Pro in CRM and try to open the report Closed Opportunities, I get the error : User Authorization not sufficient.
If I open the error I get the message :
Diagnosis
The user doesnot exist in the BI client or has insufficient authorizations
Procedure
Contact system administrator to verify the user is setup properly in both CRM and BI client
Procedure for System Administration
Verify that the user exist in BI client with the same user id, if not create it and assign proper authorizations as per the configuration guide.
When I run the query or the webtemplate in BW I don't have authorization problems, but I can't run from CRM.
Any suggestion about how to fix it?
Thanks in advance,
Fernando

Hi Fernando,
The report which you have implemented is doing a RFC call to BI system where some other system program is getting called which have authorization logic check for the RFC user ( or the person who is running the report). here report is terminating with error. I have face the similar issue.
generally such reports we use to schedule as a background job with batch user which have SAP ALL access but I feel in your case user who runs the report have not sufficent authorization in BI system and also you are not running report as an background job.
There aretwo tricks to findout the missing authorization which I also have used.
First option : close all the session except one in CRM and than run the report as soon as the error comes open transaction code SU53 to know the missing authorization - may be you can fail here as the authorization check fail in BI.
Second option definitely will work. Whenerror is coming double click on the mmessage to know the message detail(class and number) than again run the report in debugging mode (/H- type in address bar to activate debugging) than set breakpoint in the message and press f8( may be system will not set the break point immediately than you need to debug till the RFC calls BI system) . system will take you to the exact authorization code check where the error is coming. there you can find out the missing authorization object which is not included in the user assigned role. than can ask access team to add in the user role.
I hope this will solve your issue. Please revert with your finding.
Thanks,
Prem

Multiple T Codes to check User Authorization

Similar Messages

Maybe you are looking for