Muti-page HTML Web Engine that shows filename or other details

I am getting frustrated with the limited web support in Lightroom 2.1. I am looking for a very basic HTML based web engine that can show labels, flagged status or name on the thumbnail page. I don't have the time to figure out the SDK and start writing my own.
I have tried the TTG engines, which will allow you to put additional info into the thumbnails, but it dumps everything into one page and it doesn't stack the thumbnails correctly.
Can anyone point me to something that would work. It just shouldn't be this hard.
Thanks,
Chris

Right.
There are 3 ways to use CSS:
Inline: styles applied to the  HTML code between the <body> tags.  This is not usually recommended.
Embedded:  inside  <style> and </style> tags between the  <head> tags in your HTML document. This code is applied to only one page.
External: a physical file that contains nothing but CSS code and applies to all site pages that are linked to it.
If you have a unique style you want to use on a single page, either use embedded CSS (in the HTML document itself) or set up a unique class in your external stylesheet.
CSS classes:
.center {text-align:center}
.right {text-align:right}
.left {text-align:left}
HTML:
<p class="center"> this is centered text</p>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media  Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Similar Messages

  • HT5262 My first time backing up my iPhone 4. I cannot find the page on my computer that shows File Device Backup.  I need step-by-step

    My first time backing up my iPhone 4. I cannot find the iTunes page on my computer that shows File>Device>Backup.  I need step-by-step instructions, please!

    Hey Jilleemay,
    Thanks for the question. You may need to enable the iTunes menus for Windows:
    iTunes: Turning on iTunes menus in Windows 8 and 7
    http://support.apple.com/kb/HT5610
    To do so, press Control-B on your keyboard. You should then see the menubar at the top of iTunes (see image below). You can then access the File menu and backup your device.
    Thanks,
    Matt M.

  • "Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

    I created a site column at the root of my site and I have publishing turned on.  I selected the Hyperlink with formatting and constraints for publishing.
    I went to my subsite and added the column.  The request was to have "Open in new tab" for their hyperlinks.  I was able to get the column to be added and yesterday we added items without a problem. 
    The problem arose when, today, a user told me that he could not edit the hyperlink.  He has modify / delete permissions on this list.
    He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
    Link in New Window checkbox, the Display Text, and Tooltip:
    "Message from Webpage  There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
    We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
    The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
    and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem.  I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
    Summary from this link below: Comment out, below, in AssetPickers.js
    //callbackThis.VerifyAnchorElement(HtmlElement, Config);
    perform IISReset
    This is referenced in the item below:
    http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
    TThThis is possibly the same information that I saw, possibly from the above link as reference.
    http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
    Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
    I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
    Thank you!
    Matt

    We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
    I blog about this issue and having the office reference.
    Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
    So if you apply the April CU then you will be fine.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • How do I change my Mail photo id tag that shows up in other mac users mail?

    I looked around for what I thought was the obvious places like system preferences in Mail and accounts. I do not have a login setting to my mac since I'm the only one using it so I have no log in photo. The pic that is up is of me when I first got my mac and I'd like to update it. Where can I edit that outgoing photo of me which is ugly that shows up in emails I send to mac users?! Thanks, Matt

    Mail isn't sending the photo. The Address Book photos are put on incoming mail that matches a user in the Address Book. You need to retouch your photo in the other users' Address Books.
    It is possible other users could be getting your picture from a server. From Address Book's Help:
    "A picture can appear in a contact’s card even though you haven’t added a picture yourself. If a picture whose filename matches the contact’s email address and whose file extension is .tiff (such as [email protected]) is located on your computer in a folder named Library/Images/People, or is located on a computer or server you’re connected to in a /Library/Images/People folder, the picture will automatically appear in Address Book, Mail, iChat and other applications where the contact’s email address is used."

  • Fonts missing in CS2 that show up in other programs

    I recently moved my copy of Photoshop CS2 to a new Windows 7 computer and all seemed to work well until I had need for a specific font. It's not there.  The font shows up in the Windows Control Panel and in other software, like MS Word, but it's just not on the list in Photoshop.
    I'm not sure how to proceed, but that missing font is an important one for me and I'll appreciate any help that might be available.
    Thanks,

    After checking my font inventory against those that show up in my PhotoShop selector window, I find that there are several that appear in the Windows Control Panel, MS Word and other Office applications, as well as Acrobat and InDesign, but not in PS.  It appears that PhotoShop is the only thing that has this problem, so the solution should be within that process.  I've followed a suggestion found in another thread, by deleting the PS font list files, but that seems to have no effect.
    This is an especially thorny problem since my firm's logo depends upon one of the missing fonts.  Is there any possible solution in re-installing PhotoShop, or even in an upgrade to a later edition?  I'd prefer not to spend the money for the latest, but have to solve this problem somehow.

  • How to I delete the web address that shows up on the top of the page on all my printed material?

    When printing packing slips from a program called Red Cheetah we get web address across the top of the page. How do we delete theis information?

    File > Print setup > Margins & settings

  • Web Module: Works great, but is it possilble to publish an HTML web gallery that does not use thumbnails, but just displays all photos (one above another)?

    It would be nice if a published web gallery did not require clicking or sliding in order to view a new picture. Is there a template that just puts up every image in the gallery, full-size, one above another? That's how I like my webpages - see, for example, www.sgrhoa.net/betz/150205/ .
    Thanks!
    Bill

    The built-in templates do not do that. At a quick glance, none of the available templates from Adobe's site do that either.

  • Every time i click anywhere, on any page, the blinking line that shows up when you're typing appears on the page.

    for instance, when i was typing this question, the blinking line appeared in the box. when i clicked outside the box, it appeared next to the header above this form, as if i could type there.
    a lot of the time, if i try to click away, the blinking line applies itself to the entire page. if i do manage to get it to vanish, i can't scroll with my arrow keys; if i don't, hitting the down arrow takes me to the bottom of the page, and hitting the up arrow does nothing.
    i can still follow links and such.

    You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing]: press F7 to toggle
    See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    See http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • Not receiving some mail that shows up on other servers

    Sometimes I do not receive all emails in Mail. I can however find them on my service provider's email app. It only seems to happen with a couple of senders, but not all the time. At least I'm aware of those because they involve business dealings that I apparently missed. I've checked 'rules', rebuilt the mailbox, checked the firewall and resent the missing message from my server's account. All to no avail. HELP!
    This problem is not new to me with Leopard. I also had this problem with previous OS versions.

    Nope.
    I restarted the device, I verified that I have internet, I even deleted the account and re-entered all that information again.
    It reloads nearly all my emails fine, in fact all of them that I know of, EXCEPT for this one from my friend, sitting at the top of my inbox on my iMac.  It's an email sent by my friend from his iphone, with a 126K photo attached. 
    Is there some reason iOS would refuse to show me this mail, like a junk filter? 
    Thanks
    Bob

  • My mothers iPod dosent show her primary  mail acct and asks for a password for that acct and when i click on the one that shows its her other acct and it asks for the password for the primary acct and then refuses the password can someone help?

    My mothers iPod dosent show her primary mail acct and asks for a password for her primary mail acct and shows her secondary acct without any label and password please help tried everything do i need to delete both accts and start over????

    also the secondary acct does not show up on mailboxes just #of e-mails something is not right with this iPod should we delete the mailing accts and redo them or...... please help my mother almost threw the iPod overboard on her last overseas trip and ive tried everythin i know to do so help help help

  • I have an icon on my phone that showed up the other day

    looks like a circle with a lock in the middle .. what is it for??

    This may be of interest:
    Locking Orientation
    (Note that I am a representative of the organization for the above link, which is not endorsed by Apple).

  • Hiding the outline section of PPT converted to HTML in Page Viewer web part

    Hello,
    I've converted the PPT (Office 2010) to HTML using .SaveAs command. I'm adding this HTML on my SharePoint site in a page viewer web part. I get an outline section for PPT which shows all the slides. By default, I want the outline section to be closed (collapsed)
    so that I see PPT slide in full view.
    Has anyone done this before?
    Thanks,
    Ajit

    Hi Ajit,
    When we save PPT as HTML page, the PPT HTML page uses a lots of html pages and JavaScript functions to show the slides in a web browser. When we click "Outline" button, we can be able to show or hide the outline. Actually, this button uses JavaScript to
    do so.
    In this case, in order to show full page on load, we can simulate the action that clicking the "Outline" button onload.
    Open the PPT HTML folder(if we save PPT to HTML, there will have a folder)
    Open the file outline.htm with text editor
    Modify the Load function to be:
    function Load() {
        if (IsWin("PPTOtl")) {
            LoadOtl();
            parent.gOtlLoaded = true;
            var btn = new TxtBtn(
            "nb_otl", "nb_otlElem", parent.ToggleOtlPane, GetOtlState);
            if (btn != null) {
                btn.SetPressed();
                btn.Perform();
            return
        if (g_supportsPPTHTML) {
            if (IsWin("PPTNav")) {
                LoadNav("NavObj", UpdNav);
                parent.gNavLoaded = true;
                return
            if (IsWin("PPTOtlNav")) {
                LoadNav("OtlNavObj", UpdOtlNav);
                parent.gOtlNavLoaded = true;
                return
    Once we done, and upload the files to SharePoint again, the page viewer web part will show the PPT in full page.
    If there is anything unclear, please feel free to ask.
    Thanks,
    Jinchun Chen
    Jinchun Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact tnmff AT microsoft.com(Please replace AT with @)

  • How to set an input box in an HTML Web Resource embedded in a CRM 2013 form

    I have embedded an HTML web resource that contains some input boxes in a custom CRM form. In the CRM form I have created some fields that corresponds to the input boxes in the web resource and they are hidden.
    The reason to do so was the limitation of the CRM not giving me the flexibility of the layout I was looking for. So basically, the user enters the data in the web resource and once saved they write to the hidden fields. On the other hand, when the form loads
    the values from the hidden fields are copied into the web resource input boxes.
    I am having a hard time setting those input boxes from the corresponding hidden fields on the form. I can read the crm fields easily using JavaScript. I can also get to the HTML web resource using the following:
    var target = Xrm.Page.getControl("WebResource_CriticalPath").getObject(); I also appended the contentWindow.document to the end of this and it comes back not null but when I try to get to the HTML element which is the inputbox I am trying to set
    the value to, I get a null reference. I am using:
    target.getElementById('input20'); to get to the element. I know this is not supported and I have to use Xrm.Page but I cannot figure out how to do so.
    Also, any advice on how to do the writing back (i.e. from the element to the form field) when the record is save would be helpful.
    I really appreciate any comments/help in this regard.

    Hello,
    What I would suggest is try to do everything from your html webresource. Add following code to set you field's value during onload:
    document.getElementById('input20').value = window.parent.Xrm.Page.getAttribute('hidden field id').getValue();
    Add following code to onchange hanlder to put changes back:
    window.parent.Xrm.Page.getAttribute('hidden field id').setValue(document.getElementById('input20').value);
    Dynamics CRM MVP/ Technical Evangelist at
    SlickData LLC
    My blog

  • How to view all pages of a multi-page HTML email in Mac Mail 5+ (Lion to Mavericks)?

    In previous versions of Mac Mail (up to that included with Snow Leopard, Mail 4), it was possible to scroll through all pages of a multi-page HTML email, like that send from the Tivoli Storage Manager reporting system.
    Since Lion, that has not been possible. The first page displays, but that's it.
    As a possible complication, I'm accessing an Exchange server, not IMAP.
    I have not been able to find a setting that might be related to this, nor have I found anyone who seems to be perturbed by this issue. Perhaps there's very few of us trying to read multi-page Tivoli reports on a Mac.
    In any case, I would prefer not to switch to a different mail app, or sign on to the Outlook Web Service version of our email to see the full report.
    Any thoughts?

    I've been able to find someone willing to do some testing that I can't do without installing old versions of Reader on my computer.  The surprising (to me) result is that the Submit button causes the problem.  By simply removing the Submit button, Reader 10 is now able to print page 1.  The Submit button was set up to do a "mailto".  I don't know whether other destinations also cause the problem of the page not printing with old versions of Reader.

  • Page HTML Body Attribute - can there be more than one in this area?

    In "Oracle Database Application Express Advanced Tutorials", Release 3.0, B32469-01 on page 10-10, in the section labeled "Create a Call to the disFormItems Function" in step 6........it reads:
    //start citation
    In the Page HTML Body Attribute, enter the following:
    onload="disFormItems(); first_field();"
    //stop citation
    My questions are:
    Can there be more than one "onload" statement?
    If yes, how do you string them together?
    Assume the second function I want to add is "disFormItems_local()"
    Thank you,
    Maggie

    Okay, I have figured it out, I believe. So, I will provide my own answer in case someone else is looking for this type of situation in the future.
    I edited the page definition by adding another function, disFormItems_local(), to the HTML Header Attribute.
    Next, I edited the item's HTML Form Element Attributes to call the function, onchange="disFormItems_local()"
    Then, I created a call to the disFormItems_local function in the page HTML Body Attribute, onload="disFormItems(); first_field(); disFormItems_local();"
    Other stuff that you will need to know is to be found in Chapter 10 page 8, Enabling and Disabling Form Elements of the 3.0 Advanced Tutorials.

Maybe you are looking for