My 6th gen ipod is going to sleep after 1 min

since i installed the version 1.1 for my 6th gen ipod nano
the unit goes into a "sleep mode" after around 60 secs?
any ideas or suggestions for a setting change?
thanks,
richww

I'm having the same problem. Have you had any luck since you posted your question?

Similar Messages

  • My brand new 6th gen ipod nano keeps shutting down after about 30 seconds?

    My new 6th generation ipod nano keeps shutting down after 30 seconds. It has been registered with itunes and has about 200+ songs on it. I have not tried to reset it because i was not sure what this would do. Please help!

    This is usually a sign that your headphones are not plugged all the way in.  Make sure you cannot see any silver still showing from the headphone's plug.  It may require a little extra force to get the headphones to become fully inserted.  You should hear a sort of clicking noise indicating that they have been fully seated.
    Also check the headphone port from a damage or debris.
    B-rock

  • My 6th gen nano will go to sleep after 1min. if I don't keep touching the sceen or pushing the buttons. How can I get this function to turn off?

    I can't relax and listen to music as my nano will go to sleep after just one minute of not touching it. This is really irritating and needs to get fixed. Can anyone help? I've read the manual and it doesn't say anything about my problem.

    Your nano is pausing playback when the screen goes dark. The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
    Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
    Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
    Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
    i
    PS: For more on this, with pictures, see this post: https://discussions.apple.com/thread/2765444?start=30&tstart=0

  • Are people in the United Kingdom going to get the 6th gen Ipod Nano as replacement?

    Are people in the United Kingdom going to get the 6th Gen Ipod Nano as replacement for the 1st gen ipod or does this only apply to the United States?

    Looks like we are gettihg six gens as the first have started to hit the mat in the UK if you had replacment pending in November.

  • ITunes 11.1.5 won't sync podcasts to my 6th gen ipod nano--how do I fix this?

    iTunes 11.1.5 won't sync podcasts to my 6th gen ipod nano--how do I fix this?
    Until a few months ago, my iTunes had no problem syncing podcasts to my 6th gen ipod nano. Since an update in the iTunes software version (not sure which version), iTunes just won't sync podcasts to the nano. No other changes have occured and only podcasts are affected.
    What's going on? How do I fix this?

    I had the same problem with my nano when I updated to itunes 11.1.5. It seems that the update does not transfer all of your podcast download preferences. Open itunes, select "Podcasts" from the drop down box in the upper left of the screen. The next screen will give you an option to select "My Podcasts" (top center). This will bring up a list of your podcasts on the left. Right click on one and select "podcast settings". This brings up a settings box on the upper right (this is a new variation) with your current download settings for that podcast. The download setting on mine had defaulted to "off" on all of my podcasts. I just reset them to "all episodes" and all is good.
    Hope this helps.

  • 6th Gen iPod won't stay in standby

    I have a 6th gen iPod classic that I recently resurrected by installing a new battery. I also restored the firmware via iTunes after replacing the battery. I can pause playback and the backlight times out OK but it "wakes up" about 30 seconds to a minute later. This continues to repeat and drain the battery. I have tried forcing it into standby (holding play/pause) and engaging the hold switch to no avail. It seems that if I keep it docked to one of my speaker units it sits and charges and behaves. What could cause this?
    Thanks,
    Joe

    Hello jfusco,
    It sounds like something may have been misseated when you replaced the battery putting extra pressure somewhere on the inside of the iPod causing it to come out of sleep.  Double check to make sure everything is as exactly as it should be.  Not really much else for suggestions at this point.
    B-rock

  • 6th gen ipod nano not recognized by itunes on my PC (Windows 7). tried everything to fix, but still not working... please help

    I have a 6th gen ipod nano that is not recognized by itunes on my PC (Windows 7). I get an error that it 'could not be identified properly'. I have tried all tips on the apple site to correct the problem, including unistalling and reinstalling itunes twice. Nothing works. Has anyone tried something that worked that is not part of the Apple support page (http://support.apple.com/kb/TS3218)? Thank you in advance for any help!

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • My 6th gen Ipod nano does not show up in Itunes or in My Computer

    I do not think that this is a problem with my computer because I own an older 5th gen nano and have never had problems with it before. Both my computer and Itunes has no problem seeing the older Ipod right now. I have followed the troubleshooting guides and I'm still stumped on why my new Ipod won't appear. I've read several disscussions and haven't found the fix yet. My newer Ipod has been connected to another computer before but I don't know whether it was a Mac or a PC, and I believe that is the problem. I was thinking maybe it would help if I completely reset my Ipod, I don't mind losing any music, but I have no idea how to if I can't connect it to my computer. Please tell me how to reset it to facory settings or if you think that something else will work I'm completely willing to try that too. Thank you.

    Thanks for a reply
    The cable that I'm using came with my 5th gen nano. The 6th gen Ipod shows that it's connected but the computer doesn't see it, so I don't think that it's the cable.
    I did try this before when looking at the troubleshooting guide and nothing happens. It just resets and then the Ipod screen tells me that it's connected to the computer. It still is unseen by Itunes and no where to be found in my computer.
    I don't have another computer to plug it into at the moment but I may be able to visit a friend that owns a decent PC in a few days. If that doesn't work out I will be getting a new lap top in a week and I'm hoping that it will work on that, but it won't be a Mac. So, let's say it works when I plug it into one of these computers, should I reset my Ipod from there or is there something else I should do?

  • TS1538 I have 6th gen iPod nano.  When I try to sync it my computer tells me it has malfunctioned and Windows does not  recognize it.  My iPhone syncs fine so the problem must be the iPod.  I have reset the iPod several times and no luck.  Any suggestions

    . I have 6th gen iPod nano.  When I try to sync it my computer tells me it has malfunctioned and Windows does not  recognize it.  My iPhone syncs fine so the problem must be the iPod.  I have reset the iPod several times and no luck.  Any suggestions?

    Hello Alexdad,
    We've an article that can help get your iPod Nano working with your computer.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Cheers,
    Allen

  • I have a 6th Gen ipod nano. Is there a compatability problem with Windows 8.1?

    My 6th gen ipod nano is not being recognised in itunes. I have tried all the suggestions in the itunes troubleshooting section without success. I am running Windows 8.1 , is there a chance of an incompatability problem here?

    I have tried all the suggestions in the itunes troubleshooting section without success.
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Has anyone had a problem with low battery capacity on the 6th gen ipod nano?

    I got my dad a 6th gen Ipod nano for his birthday and he is complaining about very low battery power and i was wondering if other nano users were experiencing this problem

    Samething here.  I got my ipod nano on Christmas 2010 and I always thought that it did not have the 24 hours music playback capacity.  This week I had the ultimate test.  I had to go the hospital and knew I would be waiting a long time. I fully charged my ipod nano (3 hours connected to my computer)... then, I turned it on at 11:30 in the morning and I played the radio non-stop until 5:30 PM when it just stopped working.  That's 6 hours of music playback, not 24...
    Is there something I should know about the battery and how to charge it to maximise music playback??

  • 6th gen ipod nano serial number not being recognised by support

    I have just tried to register my 6th gen ipod nano on Apple's website and I get a message that says the number is not recognised, recheck and try again.  At first used number from nano box, then tried again after connecting nano to computer (same number appears of course) but still not being recognised.  The fact that the serial number is not being recognised is not helpful when you need help from support as they also require this information before they will contact you.  Why is my nano's serial number not being recognised?  More to the point, how do I get apple to recognise it?

    Are you sure aren't mistaking I's for 1's or O's of 0s?
    If you head to Settings - General -> About, does it list the same serial # there?
    B-rock

  • Can i use any headphones into a 6th gen ipod nano? and how loud does the volume go without headphones? - maybe in comparison to an ipad?

    Can I use any headphone with a 6th gen ipod nano? How loud is the volume without headphones? - in comparison the the ipad

    Here's a selection:
    http://store.apple.com/us/browse/home/shop_ipod/ipod_accessories/headphones#m.ip odCompatibility=ipodnano

  • How do I get my windows 8 computer to recognize my 6th gen ipod nano

    how can i get my windows 8 computer to recognize my 6th gen ipod nano?

    Hello Warren,
    Thank you for the details of the issue you are experiencing with your iPod nano.  It sounds like your iPod nano is not being recognized in iTunes on your Windows computer.  I found an article with steps to address this:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Can you sync games and apps to the 6th gen iPod nano?

    Hi, is it possible to sync games and apps to the 6th gen iPod nano because it is a touch screen?
    Thanks,
    Paris

    The_Photographer wrote:
    Hi, is it possible to sync games and apps to the 6th gen iPod nano because it is a touch screen?
    Thanks,
    Paris
    No.  Apps are only compatible with devices running iOS such as the iPod touch, iPhone, and iPad.
    B-rock

Maybe you are looking for

  • Why can I not print PDF files in color?

    Windows 7 Ultimate (x64 Adobe Reader 10.0.11 HP Color LaserJet CP1215 I downloaded U.S.IRS tax Form 1040 for 2014 from Forms and Publications (PDF).  All the text is black. Much of the form has a pale green background that does not extend to the edge

  • This is interesting . . .

    Hi all you FCPro experts - hope maybe someone has been here before! We produce various shows, usually about 5 minutes long. We shoot mostly with Canon XL-2's of course on mini DV. Most of our capture folders are about 20 - 30 gig per show - and when

  • Enable reader in educational version of Professional?

    Hi: I'm currently using Acrobat Professional v7. I need the capability to enable Reader for the forms that I create (I need the user to be able to send the forms back to the department in pdf format. Currently that can only be done if they are using

  • Why after I updated my ITunes to 11.1 and my windos to 8.1 my ITunes won't Sync and can't even find my IPad.

    I updated my windows 8 to 8.1 and now my ITunes 11.1 is not finding my IPAD, my computor know its there, but my Ipad doesn't. I'm not sure why I do updates, give me back my windows 7 and the old ITunes. any help will be great.

  • CS2 - Can't "Save" or "Save As"

    Illustrator CS2 operating in 10.4.11 with 3.5gb of RAM. Opened a simple bar chart to make modifications BUT when I tried to save I received error messages. - If I try to save as an Illustrator file: "An unknown error has occured." - If I try to save