My apps don't work/after update/4th/ did up dates yesterday, now none of my apps are working. When click on them my screen blicks

When I did updates last night about videos. Now non of my apps are working. When I click on them the screen blicks on and off. Everything else see fine.

- Have you tried to reset yur iPod?
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Next would be to restore the iPod from backup via iTunes
- Last would be to restore you iPod to factory defaults/new iPod via iTunes since there may be corruption that is in your backup.

Similar Messages

  • After updating to ios 7, I am now asked to enter my password continuously when using outlook web access for my work emails. This didn't happen before, I only had to enter my password once. How can I fix this?

    After updating to ios 7, I am now asked to enter my password continuously when accessing my emails on outlook web access. Before I just had to log in and I was able to reply, save emails, etc without re entering my password. How do I fix this?

    Similar thing is happening to a relative.
    He upgraded his iPhone 5 and lost his iCloud account and all his email accounts. Major pain in the neck for a senior. And it was not a user error...unless you count the fact that he hit the upgrade button.

  • Enh. COPA0003 don't work when clicking button "profit. segment " of FB70

    Hi all,
    I would like to use the Enhancement COPA0003 to populate some characteristics in screen "Assignment to a profitability segment" of transaction FB70.
    I have activated this Enhancement, and i have put a break point in the function EXIT_SAPLKEAK_001 of COPA0003.
    But when i click on the button "profit. segment " of FB70, the debug isn't executed, it means this enhancement don't work.
    Anyone know how we do to activate this enhancement in FB70 (FB01, FB02 too)? if I'm missing other setting for COPA0003 before it's activating in SMOD/CMOD?
    Thank a lot in advance,
    Vinh Vo

    If the posting is done in batch (or triggered by workflow) function module 
    EXIT_SAPLKEAK_001 is not run. From release 5.00 on characteristic groups are indeed not considered any more during batch input processes because      
    there were problems before with initial chars of a CO-PA line item       
    resulting from a batch input process that actually shouldn't be initial. 
    Please take a look at the sap note 581739  (implemented in standard with 5.00) 
    that put an end to usage of char groups during batch input processes. 
    BR,
    MLM

  • Stamps don't work when clicked on - LiveCycle's fault?

    I am trying to set up my staff with signature stamps in their Reader... I've extended the features on the files they need to use, and sucessfully loaded and saved a new signature to acrobat. However, when I click on the signature to use it, nothing happens. I've tried clicking from the tools drop down, the comments pallet, the stamps pop up...
    I think it has something to do with the fact that the forms I am using are made in LiveCycle Designer ES. It works fine in non livecycle pdfs. Is there anyway I can get around this? These are the forms I need to put stamps on, theres no changing the fact that they're livecycle.
    Maybe if I have them save the form by printing to adobe acrobat? And THEN signing it? But you know how it is, more steps, more confusion, the more my team is fustrated.
    Let me know if you have a solution for this or an alternate way of signing a PDF from reader.

    Paul, let me clear up your confusion:
    When I said I "extended the features" that means I extended the PDF to allow comenting in reader. I have Acrobat Pro 9, and used the extended feature function on the files, and have tested them on both my reader and other people's readers, and it works great. I couldn't have even made the stamp in the first place if it hadn't of worked on the livecycle files (the options wouldnt have appeared). It's just these specific livecycle forms that won't load the stamp after I've made it, all other documents work great.
    Maybe it is possible that since Comments need special treatment to be saved/viewed/printed, that could cause a problem, but that wouldnt explain why it only doesnt work on forms that were made in Livecycle but works on everything else...
    And yes I am using stamps to create digital signatures, I'm surprised you've never heard of it, it is actualy a very popular use of stamps as the actual digital signature function isn't so good. If you want to learn more about them, you can read more about it if you google it: http://bit.ly/bFLamS

  • My pop-up menus don't work when I apply them.

    I have been working in fixing this problem nearly all day and haven't been able to find a solution. I added a pop-menu in DW, but it doesn't show up. I am new to coding and I suspect it has to be a problem with the hierarchy of the code, but I just can't seem to figure it out. Can someone pleeeeeese take a look at my source code and let me know if you can see how to correct this problem. The .js file is in the folder so I know that's not the problem.
    Please please help if you can.
    Here is the link: http://www.graphicmechanic.com/DEKALBCOUNTY/LIVING-IN-DEKALB/LIVING-IN-DEKALB.html
    The link that I applied the pop up menu to is the "Arts & Culture" link in the list to the left in blue area.
    Any advisement that gets me closer to solving the problem would be greatly appreciated!!!!

    I believe it's because the code to create/load the menu is wrapped in a <script> tag that actually calls an external JS file, meaning the external code is executed instead of the code wrapped in the tag. You have this at line 62:
    <script language='JavaScript' type='text/javascript' src='TE_FontMagnify/yahoo-dom-event.js'>function mmLoadMenus() {
    It should be this:
    <script language='JavaScript' type='text/javascript'>function mmLoadMenus() {
    THen you would need to add this after the closing </script> tag to call that external file again:
    <script language='JavaScript' type='text/javascript' src='TE_FontMagnify/yahoo-dom-event.js'></script>

  • Itunes songs don't work when I transfer them to ipod... please help

    I brought 30 songs in itunes today, and managed to successfully transfer 23 onto my ipod. However, the remaining 8 songs do not play on my ipod and exclamation marks come up next to them in the margin. When i look at the information of the songs i can see that I am not allowed to change any details about the song. It is as though I am not permitted to access them or something. I am new to using the itunes store and am unsure what to do, please help!
    Thanks,
    Emma

    I'm confused, are you seeing the ! in itunes, or on the ipod?
    Will those 8 songs play OK in iTunes?

  • TS2621 Have email account on iPad, now email on my computer are blank when I open them. What have I done

    Inset up iPad email for my AT&amp;T account. Now when I open email on computer, the emails I open are blank.  What have I done? They are all fine on iPad. Also, new emails are only going to iPad. Thank you!

    Hi caesarome I have tried to set it up again by choosing Yahoo from the list of providers - but that just took me into a 'set up Yahoo email' page (sign in or create account) . I couldn't use my sky email address or password in doing that. I now have a new yahoo email account [email protected] that I don't want. On the ipad mail it just shows an empty inbox for my Yahoo email (although my sky email address is still there under settings>mail) - no sent, trash, drafts etc. I have also followed other advice that sets up the email again using 'other' provider but changes the host names under incoming and outgoing mail server to apple.imap.mail.yahoo.com and apple.smtp.mail.yahoo.com  That hasn't worked either. The iphone (with exactly the same settings that I had on the ipad before messing around) works fine!

  • Help after updating the OS to 4.3.3 none of the 3rd party app work

    Help after updating the OS to 4.3.3 none of the 3rd party apps work at all they just flash up on the screen and then die.

    install a free app (or any other app) from the app store, then the problem will be fixed.

  • Apps don't disappear after updating

    My updated apps don't disappear after updating concludes on my iPad.  I noticed that this only started happening after installation of iOS7.

    Hi Aleagle,
    Just so you know, the reason this was changed for iOS 7 was in conjunction with the Automatic Update feature that was also introduced with iOS 7. If updates to apps are being done automatically, then you would have no way to know what apps were updated or when. This new list in the Updates tab was added to provide the update history information.
    Cheers,
    GB

  • Hi everyone, I've had problems with some apps on my iPad. The apps don't open after update

    How do I fix apps that don't open after update?

    Try a hard reset ie hold the power and home buttons simultaneously until the Apple logo appears (ignore the red slider). Are you still using iOS 4.3.3, as in your profile? A lot of apps now need an iOS of 6 or higher for the update to download.

  • After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?

    After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?

    ofel wrote:
    After updating my iPhone 4 to iOS7, the controls on the headset are not working ..
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • My iphone 5c crashed after updating to IOS 8.02 and now i don't have anything from the last 3 months. What do I do?

    My iphone 5c crashed after updating to IOS 8.02 and now i don't have anything from the last 3 months. What do I do?

    Don't worry about that. iPhone stuck in recovery mode always happens when you update the iOS on your iPhone. There are two ways to solve it.
    First is is to put your iPhone in DFU mode.
    Step 1. Turn off iPhone
    Step 2. Hold down the Power and Home button.
    Step 3. When you see the Apple logo, release the power button but continue holding the Home button down.
    Step 4. Open iTunes and wait for it to tell you that it’s in restore mode.
    If DFU mode can't solve the problem, I'm afraid the only solution is to try some 3rd party software, like iPhone data recovery or something like that. You may simply try the tutorial here: How to Fix iPhone that is Stuck in Recovery Mode.

  • Updated to 10.8.2 and now none of the MS Office 2011 are working

    Recently, I updated to 10.8.2 and now, none of my Microsoft Office products are launching (2008 or 2011). Any ideas what how this upgrade could have so adversely affect Office and what can be done to correct it?

    We had to completely uninstall MS Office and all associated files. Then we reloaded the app. After a few reboots it worked fine. When I got on the computer today and received the Mt Lion update I was dead in the water again. I'm really not looking forward to going through the entire exercise again not knowing if the next time Apple sends out an update the same will happen.

  • DHTML hotspots don't work when linked from Framemaker

    I'm using Adobes Technical Communication Suite 4 on a 30-day trial to determine how well it will work for single-source publishing. I'm familiar with Robohelp (having used it for over a year) but have had almost no experience with Framemaker (and none with version 11, which is part of the suite).
    Until now, we've been writing in Word and importing files into Robohelp. We use the Dynamic HTML features of Robohelp to create drop-down and expanding text (usually to provide the definition of a term). Word doesn't provide a way to create them, so it has to be done in Robohelp after import. However, with Framemaker, I should be able to create these features in FM have them appear in a linked RH file. There is a Framemaker menu to support their creation.
    But when I attempt to do this, it doesn't work. The " text caption" (that the user clicks on to see the expanded or drop-down text) imports correctly into RH, but the expansion does not work. When clicking on the caption text in the HTML preview, the only thing that happens is that a single space appears where the drop-down text should be. The drop-down text itself remains invisible. (But I know it's there because I can find it in the HTML source code view.)
    I am probably doing something wrong when I set this up in FM. Here is my procedure.
    First, I type the text that will be clickable by the user to elicit the drop-down (this is what I presume Adode means by "text caption"). Then, in a new paragraph, I type the text that is intended to be displayed in the drop-down.
    The instructions (for drop-down text) in the help say:
    "Select the text or paragraph on which you want to place the drop-down text caption. "
    So I select the "text caption" text.
    "Select Adobe RoboHelp > Dynamic HTML Effects > Drop Down Caption"
    I select that menu choice.
    "Select the text that should appear as drop-down text in your online help page."
    I select the next paragraph, which contains the drop-down text.
    "Select Adobe RoboHelp > Dynamic HTML Effects > Drop Down Body"
    I select that menu choice.
    I save the file and then switch to Robohelp and update the linked file.
    The "text caption" then appears in the RH file, but the drop-down text does not appear (except in the HTML source code).
    What am I doing wrong?

    Problem solved, through experimentation.
    For the benefit of those who may experience this problem in the future: the secret is that there must be exactly one return (i.e. one press of the Enter key) between the "text caption" and the "drop-down text".
    If the text caption and drop-down text are on the same line, it doesn't work (the coding for the text caption is disrupted) and if there is anything besides a return between them, it doesn't work (the drop-down text is not displayed).

  • Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error

    After updating to Acrobat Standard and Readre 9.5.2, some (but not all) of my pdf files are now opening with the error "Insufficient data for an image." The files open, but they are fuzzy, pixelated and are missing the bates stamp I applied earlier (using a utility from LexisNexis Casemap). I can open the files fine on another computer with Acrobat Standard 9.5.1.
    How can I uninstall the 9.5.2, or get it to work again?

    Windows 7 64-bit with Samsung SSD on an i5 Lenovo laptop. Yes, I have both Acrobat Standard and Reader 9.5.2 on the machine. Both give the same error when opening the attached file.
    -Dan-
    [email protected]
    Date: Thu, 16 Aug 2012 23:06:52 -0600
    From: [email protected]
    To: [email protected]
    Subject: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
        Re: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
        created by vamalik in Acrobat Installation & Update Issues - View the full discussion
    Hi osieko,Can you share across any such sample pdf file? Also, what OS are you working upon?You have both Acrobat Standard 9.5.2 and Reader 9.5.2 installed on your machine. Right? One option that you can try is to repair your Acrobat/Reader from Programs in Control Panel and see if that resolves the issue.Otherwise kindly attach a screenshot of the error you are receiving along with any sample pdf file.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4627764#4627764
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4627764#4627764. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for