My ipad says ipad is disable and it needs to connect to iTune?

I have this Ipad taht my cousin gave me to fix, when i turned it on is say ipad is disable and on the bottum says connect to iTune. How do I reset it with out logging in.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost
Message was edited by: Diavonex

Similar Messages

  • IPad says it is disabled and I need to connect to iTunes but when I try to connect it says to enter password for ipad

    My ipad says its disabled and need to connect to itunes but is says to enter password which I don't have because of my kids.  How can I reset the i[pad

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it

  • What does it mean when my ipad says it is disabled and I need to connect to itunes

    Okay, so, I just got an ipad yesterday and when I got to work today it said " ipad is disabled, please connect to itunes", but it will not allow me to connect because I have a password. Anyone have a solution?

    If it is disabled it must be restored.
    Read:
    http://support.apple.com/kb/HT1212
    and
    http://support.apple.com/kb/ht1808
    This is not normal for a new iPad.

  • HT201412 MY IPAD SAYS IT IS DISABLED AND I NEED TO CONNECT TO ITUNES...I HAVE NOT USED IT IN A WHILE. HELP!

    Help, please

    You have to restore the device with iTunes on your computer. There is no other way around this now. This will explain to you how to restore.
    http://support.apple.com/kb/ht1414
    Pay attention to the last part of the article about using recovery mode. You may need it.

  • My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

    My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

    Then try DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My ipod says it is disabled and tells me to connect to itunes but nothing happens how do I fix it, My ipod says it is disabled and tells me to connect to itunes but nothing happens how do I fix it

    My ipod says it is disabled and tells me to connect to itunes but nothing is happening how do I fix it

    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My iphone was disabled and i need to connect to itunes coz i forgot my passcode.what shoul i do

    My iphone was disabled,then hve a message connect to itunes coz i forgot my passcode.

    Connect your iPhone to iTunes on the computer you regularly sync with.

  • HT1414 hi, my ipad states it is disabled an i need to connect to itunes...but my computer no longer recognizes it...not even charging battery......thoughts??

    ipad no longer functions
    states it is 'disabled' and to connect to itunes
    computer wont recognize ipad when connected
    thoughts??

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I forgot my password for my iPod touch and it is showing that it is disabled and i need to connect to iTunes. I don't know what to do? Can anyone help me?

    PLEASE HELP ME!!!!!!!!!!!!

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • HT1766 I am trying to restore my ipad its saying its disable and i need to connect ti itunes

    I have been locked out of my Ipad (disabled) can someone helpme unlock it

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • My iPod has been disabled and i need to connect to itunes but my iPod hasn't been properly set up since its a replacement one from apple and my computer crashed during the process of setting it up. Is there anyway that i could recouver my ipod?

    yes please help

    Place the iPod in Recovery Mode and connect to any computer with iTubes  and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen

  • My iPad says it is disabled and to try again in 21,627,292 minutes?

    My iPad says it is disabled and to try again in 21,627,292 minutes,can someone help me ?

    The device must be restored from the computer it was last synced with.
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iPhone and iPod touch: Unable to update or restore

  • My ipad is disabled and i have to connect to itunes what do i do

    my ipad is disabled and i have to connect to itunes what do i do

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • My kids entered the passcode several times wrong and now it is disabled and written on it"connect to itunes" , when i did connect it to itunes it said "can not connect to ipad because it is locked with a passcode" what can i do pls?

    my kids entered the passcode several times wrong and now it is disabled and written on it"connect to itunes" , when i did connect it to itunes it said "can not connect to ipad because it is locked with a passcode" what can i do pls?

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it.
    If you do it via a different computer that it's not normally synced to then (from here) :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • My phone is on disable and ask me to connect to itunes and when i try it says i need to unlock my phone? how can i unlock it if its locked ?

    my phone is on disable and ask me to connect to itunes and when i try it says i need to unlock my phone? how can i unlock it if its locked ? please help?

    Connect in recovery mode according to http://support.apple.com/kb/HT1212

Maybe you are looking for

  • Not able to clear vendor items in f-44

    hi guru's it is a supplier account that we want to clear. There is a problem of exchange rate as two  posting is in USD and three postings in EURO. So We have posted in FB01 a new posting saying that the 172 USD should equal 133.13 u20AC and not 133.

  • Adobe Camera Raw plugin for Photoshop 7

    Is it still possible to purchase the Adobe Camera Raw plugin for Photoshop 7? If so, can the plugin read *.raw files from an Olympus C-8080?

  • How to use selection buttons in an ALV created without abap objects?

    Hi, I use an alv created without ABAP Objects to show some information. Can I introduce inside the alv, the top buttons to select all rows / none row? And the second question, how may I introduce lateral buttons in the ALV to select indidividual rows

  • Sorting the result set return by EXTRACT for  XMLTYPE

    What is the best way to order the output return by extract?     My SELECT statement:      SELECT             regexp_replace(regexp_replace(extract(xmltype(t.message_xml), '//Event'),'<Event>',''),'</Event>',',')             FROM SUB_XML T            

  • How to Increase Border Thickness of Docking Container

    Dear Experts, I am working with Docking containers in my project. Is it possible to increase the thickness of the border of a Docking Container? I dont see any method as such in the respective class, but there is an attribute called WS_BORDER. I am n