My iPad2 slipped out of my apple magnetic cover and cracked the glass.  I've heard some apple stores will replace it if you tell them what happened

Will apple replace my ipad2 if it slipped out of the magnetic cover and cracked the glass and I have only had it for 3.5 months?

Not necessarily.  To say the iPad slipped out of the magnetic cover, would indicate one picked up the iPad by the cover.  The cover isn't permanently attached and would not hold the iPad in place if it was picked up by the cover.  You should certainly make an appointment at your Apple Store Genius Bar.  Go in and be VERY nice and apologetic.  Above all else, be honest.  If you did accidentaly pick your iPad up by the cover, tell them the truth.  They might take pity on you and offer you a one time replacement.  But, they could also charge you an out of warranty replacement fee.  There is no policy in which you would be guaranteed a free replacement.  Again, nice wins.  Angry loses.  Good luck and I hope it has a nice outcome for you.

Similar Messages

  • Apple, I downloaded a app from tongbu (minecraft pe) and it ask for my Apple ID details and then the app crashed I am scared that it will get my Apple ID and use it on my credit card please tell me what should I do but I don't want to factory reset .

    Hi I downladed minecraft of tongbu, and it asked for Apple ID, it crashed I think it is used to get Apple ID and use it on MY credit card please tell me what to do. I do not want to factory reset because I have a lot of gaming progress, tell me what should I do, I beg you.

    Hello there wkertisrags,
    It sounds like you are concerned about your Apple ID security. I would start by resetting your Apple ID password with this article:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    You can also add some enhanced security with Two-Step Verification, and here is some more information on that:
    Frequently asked questions about two-step verification for Apple ID
    http://support.apple.com/kb/ht5570
    If you feel your account data or security has been compromised you may want to reach out to our Account Security team with this article:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

    I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

    You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

  • Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    Hey there Logic Pro21,
    It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Verify that your computer meets the system requirements for Logic Pro X
    See Logic Pro X Technical Specifications.
    Test using the computer's built-in audio hardware
    If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
    Start Logic with a different project template
    Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
    Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.
    Isolate an issue by using another user account
    For more information see Isolating an issue by using another user account.
    Reinstall Logic Pro X
    Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
    In the Finder, choose Applications from the Go menu.
    Locate the Logic Pro X application and drag it to the trash.
    Open the Mac App Store
    Click the Purchases button in the Mac App Store toolbar.
    Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
    Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
    Click Install to download and install Logic Pro X.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Last night as I was setting up the pin I got distracted and entered the wrong one, now I can't access my phone as I don't know what I entered. Is there anyway around this or do I have to wipe my phone and sign in with my Apple ID and restore from icloud??

    Last night as I was setting up the pin I got distracted and entered the wrong one, now I can't access my phone as I don't know what I entered. Is there anyway around this or do I have to wipe my phone and sign in with my Apple ID and restore from icloud??
    I can't ask for help on chat as I'm away from home and don't have the box with me, and obviously can't get the serial number in my phone as I've locked myself out!!
    Any help will be much appreciated!!

    https://support.apple.com/kb/ht1212

  • I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any indi

    I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any individually nothing happens at all. It also does not ask me for my password any more but my iPad and mac book do.
    I have signed in and out of the app store and the password is correct. I have tried both kinds of reboot but that did nothing. I have tried to update the apps by connecting phone to Mac book pro...it shows the apps being download on the Mac book and says it will sync them to my phone but it does not. Everything else on my phone works fine.
    Any ideas ...Please!

    Thank you, this has resolved both the iphone and ipad problem immediately.  I am concerned that I may have a problem with apps that I bought under my old  AppleID as they will not be recognised.  Any suggestions for this please?

  • My new Ipad2 got connected to my home Wi-Fi and to the network and for 2 days everything was alright. Then I encounteed a problem. Though my Ipad2 was getting connected to Wi-Fi, could'nt access network. How to enable Data Roaming?.

    My new Ipad2 got connected to my home wi-fi and to the network. For 2 days evrything qored well. Then though Ipad2 was connected to wi-fi, it did not open the web page/s. The dialogue box read, `Data Roaming is turned off. You can enable Data Roaming in the Network Section of General Settings' When I tried it, there is no item of Data Roaming displayed in the Network Section of General Settings. It shows only two settings. 1. VPN and 2. Wi-Fi.  How to correct this issue? Help is needed to resolve this issue. I am from India and Apple do not have any local service providers.Pl. help me.

    Sounds like the WiFi is connected, but cannot reach the Internet and is trying to use 3G, but you are in a roaming area so you get the dialog.
    The first thing to try is turning the Wi-Fi off and back on again in Settings.  Or simply turn the iPad off and back on again.  If that doesn't work double-check that other devices are able to use the same WiFi network successfuly, or try the iPad on another WiFi network.

  • HT202159 Tried restarting download from the "Purchases" tab but the app comes out with "an error ocurred " message and I the button next to it is grey without any text or action. Please help, cannot dowload bad piggies game

    Tried restarting download from the "Purchases" tab but the app comes out with "an error ocurred " message and I the button next to it is grey without any text or action. Please help, cannot dowload bad piggies game

    Hi aaronvilla,
    Sorry to hear you are having issues with your iTunes Store purchase.   The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    To report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase, follow these steps:
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    Hope this helps ....
    - Judy

  • Trying to update my ipod but i get the error message network timed out.  I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

    trying to update my ipod but i get the error message network timed out.  I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

    Try the manual method specified here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • In tune show all summary activity during sync between nb and apple device. One of the summary is memory space status. Audio mayb3gb, photo 2gb, app with 3gb. What is other? Other consist of what type of file?

    In tune show all summary activity during sync between nb and apple device. One of the summary is memory space status. Audio mayb3gb, photo 2gb, app with 3gb. What is other? Other consist of what type of file? It show quite substantial storage capacity?? Anyone can answer what is in other??

    "Other" includes data such as contact information and photos assigned to contacts, calendar events, Safari bookmarks/cookies/history, notes created with the Notes application, SMS messages, email stored locally or cached, and 3rd party application data created and stored by the application.
    If "other" is more than say .75GB at the most, you had a corrupt sync. Try syncing again and if the problem persists, the recognized fix for this is to restore your iPad.

  • My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does no

    My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?

    If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
    Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
    An Internet connection will be required (wired or wireless).
    At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.

  • Hi...my last updating software was with 4.2.1 and today I updated new software 4.3.5 and im not happy with more strong vibration ,Can apple consider it  and restore the previous settings of vibration.Thank you

    Hi...my last updating software was with 4.2.1 and today I updated new software 4.3.5 and im not happy with more strong vibration ,Can apple consider it  and restore the previous settings of vibration.Thank you

    Apple isn't here.
    This is a user to user forum.
    Allan

  • Good Evening, I bought a Mac Book Pro in Miami and with Apple Care that was recorded in the Apple Store - Lincoln Road. Now I can not get access to Apple Care here in Brazil. Someone tell me what happens? Please help me solve this problem.

    Good Evening, I bought a Mac Book Pro in Miami and = with Apple Care thatwas recorded in the Apple Store - Lincoln Road. Now I can not get access toApple Care here in Brazil. Someone tell me what happens? Please help mesolve this problem.

    Call Apple Care

  • Using the paste options randomly misses out text, don't use it and use the 'Paste Special...' option instead (MS Outlook)

    Also there seems to be no obvious way to report Office bugs.  This is leaving little room for improvement.  Not sure if there has been any planning on this front???
    For example, [MS Outlook] using the paste options randomly misses out text, (don't use it and use the 'Paste Special...' option instead).  But how do I communicate this to the Office team without knowing at least one of the team personally (which I
    don't)???

    Hi,
    Do you have this issue when pasting in other programs?
    If you are pasting something into Outlook, some formats and images may get lost, especially when you choose the Paste Options as Keep Text Only.
    Once you have this issue again, please try with "Keep Source Formatting". This may keep the Sour Formatting and you may not get the text lost.
    If you have any feedback when using our products, I suggest you press Ctrl + Alt + 7 or Ctrl + Alt + 8 to submit it. Microsoft will always listen to users' voice and make the products better and easier to use.
    Regards,
    Melon Chen
    TechNet Community Support

  • After updating to Yosemite, my screen saver settings are not maintained.  The screen saver reverts to some Apple default.  There is no way to get my setting to be maintained.

    After updating to Yosemite, my screen saver settings are not maintained.  The screen saver reverts to some Apple default.  There is no way to get my setting to be maintained.

    Hi ..
    Might be corrupted preferences.
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.screensaver.plist
    Click Go then move the com.apple.screensaver.plist file to the Trash.
    Restart your Mac then reset your screen saver.

Maybe you are looking for