My iPhone 4 blinks light grey and grey when trying to connect to wifi.

I have restarted my Wifi, no change. I have reset my network settings, no change. I have reset my phone and turned it off multiple times, no change. Other people in my household have no problem connecting to the Wifi. It has not been able to connect all day. I have had Wifi issues before, and I just got another phone from Apple not too long ago....maybe 3 months ago. Please help!

Also! Everytime I type a password in it says unable to join. I am typing in the password correctly. My neighbors wifi password is not working either. But they are still connected.

Similar Messages

  • When trying to connect to wifi,

    when trying to connect to wifi , it is saying cna not scan for wireless connections

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Ever since I downloaded ios7, my iPhone 4s keeps freezing when trying to connect to wifi. Help?

    My iPhone 4s keeps freezing whenever I try to connect to wifi. It either won't even open wifi, and when it does, it'll freeze as soon as wifi is open. I can force quit the settings area, and it unfreezes the iPhone, but it doesn't fix the settings area, which is still frozen. I have come to points when I can connect to wifi, but it only lasts about 30 seconds before dropping the connection. This happens everywhere, even at home, when I'm right next to the router. What should I do?

    Try resetting your settings. Settings > General > Reset.
    I had this happen shortly after updating and it worked when I reset.
    Doesn't delete anything though.

  • I set up my iPad mini without a computer and now, when trying to connect it to my mac it asks if I want to set up as new iPad

    I set up my iPad mini without a computer and have been using it for months.  Now, when trying to connect it to my mac it asks if I want to set up as new iPad or restore from back up (Which I don't have). 
    Is there a way I can connect to my computer and itunes without losing everything I've done on it for the past months?

    Go ahead and set it up as new. It's just new as far as iTunes is concerned. Shouldn't result in the loss of anything.

  • Error 403  and 500 when trying to connect  SLD and IR,ID

    Hi all
    i have installed xi in my system. iam getting an error 403 and 500 when iam trying to connect to sld and ir,id. I  think we have to set the roles  .i don't know how to set the roles. please help me in this issue.
    thanks in advance.
    s.reddy

    Reddy,
    For 403 error take a look at: note 698017
    ICM Patch Collection (VII)
    Also go through the thread:
    403 ERROR
    For 500 error go through the threads:
    500 internal server error
    500 Internal server error
    ---Satish

  • IPad displaying an Hotspot Error message when trying to connect to wifi. How do I fix?

    When attempting to connect to the public wifi network at work on my iPad, I started getting the following error message today: "Error Opening Page - Hotspot login cannot open the page because the network connection was lost."  In order to utilize the network, you must read and accept a user agreement, which will not load and instead displays the error.  I have already tried turning of the wifi and turning it back on and rebooting the device.  This has never been a problem before, and I have had my iPad for several months now.  Further, my iPhone is connecting to the same network with no problem.  How do I correct this problem??  Thank you so much for any help provided!

    Hi elizabeth_lynn,
    Thanks for using Apple Support Communities.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    If you're unable to join a nearby Wi-Fi network
    Try restarting your Wi-Fi router by turning it off and then on again.
    Note: If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    When joining an 802.11n Wi-Fi network, ensure that your router is properly configured. See this article for more information.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings, including passwords, VPN, and APN settings.
    Hope this helps,
    Mario

  • I keep getting error "Unable to join the network" when trying to connect to wifi

    Help!  I have tried to connect to multiple networks and keep getting the same error message.  I have reset my network settings and wiped the ipod clean restored.  Any ideas?

    No.
    Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS1538 Iphone 5 crashes laptop and netbook when attempting to connect to itunes.

    Iphone 5 crashes laptop running win 7 enterprise and netbook running win xp pro when connected via usb, isn't recognized in itunes or on pc device manager connected to desktop. It will charge using original cable and mains charger. Any ideas? been at it most of the day!

    Problem solved, faulty USB cable.

  • My wife has bought an iPad from a friend. My wife has an iphone with an iCloud account. When trying to connect to iCloud from the new iPad it says her username and password are not authorised. Any help

    MMy wife had bought an iPad from a friend. My wife already has an iPhone, which is registered to iCloud. She cannot acces iCloud from the new iPad. It says her username and password is not authorised. What do we need to do.

    This could be a couple different things.
         The device is not authorized to the Apple ID.
             Continue setup for the ID on the device.
      There is an account issue
            Is she able to get signed in at
                   Appleid.apple.com
                       and manage the account
    Can she get signed in at
      Supportprofile.apple.com  ?
             How many devices are registered to that Apple ID?

  • When trying to connect by wifi my Apple TV with my pc I get the message impossible to connect

    I cannot connect my Apple tv by wifi with my PC (pentium VISTA). I get the message "Impossible lot stablished connection con library of...".
    I have two wifi network: main an a second one created by my Airport Express. The problem arrives with both networks. ITunes is updated, running and the computer is in the same network

    it's difficult to understand your wifi setup
    is it both a shared internet from adhoc connection to a pc
    and a airport express?
    for adhoc connection to a pc to work the pc can't be connected to the wifi router just so you know

  • 'Alert: No Internet Connection' Error when trying to connect to Wifi networks

    Hi,
    I have a 13' MBP late 2012, reccently I've been unable to connect to any secured Wifi network after updating to the OSX 10.9.2,
    I've tried everything-
    - Restarting
    - Resetting the PRAM
    - an SMC reset
    - Restarting in Safe Mode
    - Repairing Hard Drive & Permissions in Disk Utility
    - And even reinstalling: Maverick OSX 10.9.2 (Combo) Update
    - I've even compared my laptops settings with my Sister's laptop who has also downloaded the update but does not have the same problem, they are all the same as far as I can see.
    The problem is prevelant in every Wifi network I try to connect to, the only reason I am able to connect to the internet at all right now is that I've disabled the WEP key setting for my router.
    It just keeps repeating the 'Alert: No Internet Connection' or a 'Connection Timeout' warning...
    Any help would be greatly appriciated!
    Thanks

    I have tested your xsd file in versions 10.0.5.1279 and in CR XI - no errors.
    You may try to update your Crystal Reports 10. There are SP5 and SP6 available to download from the following location:
    http://support.businessobjects.com/downloads/service_packs/crystal_reports_en.asp#CR10

  • "password incorrect" when trying to connect to wifi

    I can successfully connect to my WPA2 encoded wifi connection from many different devices in the household. One of the iPhone4s' cannot connect though, after entering password, it very quickly comes back with an alert "Password incorrect for [endpoint name]". It can happily connect to any other wifi network. An other iPhone4s can succesfully connect. I have tried most of the voodoo tricks listed here (entering wi-fi password with quotes, resetting phone network settings, restarting router), to no avail. Which device should I be returning?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipad freezes when trying to connect to WIFI.  It say i am connected, but can't access sites

    I am using the Wifi in my house and I am connected.  The IPad 3 freezes.  My phone which is an I phone 4 works fine on the wifi.
    What shold I do

    You can try clearing Safari and see if that fixes the problem.
    Go to Settings>Safari>Clear History, Cookies and Data or Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I changed the passlock screen somehow and now it's grey and boring when I type my code in how do I get the colours back?

    I changed the passlock screen somehow and now it's grey and boring when I type my code in how do I get the colours back?

    You're welcome.
    Be aware, eye candy ***** more battery.

  • I don't always hear or feel my phone when I'm in my workshop. Is there an app that can ring a bell or flash a light on and off when I receive a call or text?

    I don't always hear or feel my phone when I'm in my workshop. Is there an app that can ring a bell or flash a light on and off when I receive a call or text?

    There are a number of hardware devices that you may want to look at. Some of them require that the iPhone be placed into a "base station" in order to work. Following is one set of possibilities: http://www.harriscomm.com/index.php/equipment/cell-phones-accessories/cell-phone -accessories/loud-ringers.html
    If you do an internet search for something like "ringer for cell phone in home" you will find a variety of others.

Maybe you are looking for

  • My MacBook Air is boiling within 3 minutes of run

    Hi, I bought my MacBook Air around end of 2010. And recently I started experiencing overheating within 10 minutes of run by using common softwares and web browsing. Actually sometimes I've Chrome or Firefox with over 200 tabs (with flash blocker) or

  • Dynamic PL/SQL code into ODI Procedure

    Hi guys: I have a PL/SQL code to execute into a ODI proc that changes because of a loop. I have to update N tables that have the same prefix and its sufix is the dynamic part of my PL/SQL. Also I have to set the DT_ETL (I already have a variable in m

  • Restrict the no of values to 10 for select-options

    hi gurus, i have the require that the user can put only 10 distinct values for a select-option for selection screen....now to disable range selection and other signs than eq to i have used function module select_options_restrict.. The only thing whic

  • Solaris 8 solaris 7 system file includes

    Hello, I would like to get the header files from /usr/include/sys/*.h of a solaris 7 or previous OS, and copied them on a solaris 8. (on ultra sparc). Where can I find those headers? What are the risks to do this? Thank all in advance.

  • R&R 4.21 keeps trying to reinstall

    I have an X61T (7767-BFG) running Vista SP1 with all MS and Lenovo updates installed up to and including yesterday (29 April) If I try to start Rescue & Recovery from the start menu, windows installer runs then stops with a copy error ('An error occu