My iphone 4 is stuck on iTunes screen and the update server cannot be contacted to restore my phone. Help!!!!

I have given the iTunes server 10 hr's now and I am unabkle to do anything on my computer to restore my iPhone 4.
I am able to do everything else on my computers iTunes but not restore my phone.
Any ideas would be great.

Hello jraff21,
I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
The iPhone [device name] could not be restored. An unknown error occurred (4005).
The iPhone [device name] could not be restored. An unknown error occurred (4013).
The iPhone [device name] could not be restored. An unknown error occurred (4014).
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Restore using another USB cable.
Learn more about updating OS X.
Learn more about updating Windows.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
Learn more about other update and restore errors.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Similar Messages

  • Ipod Touch Stuck On iTunes Screen. The iPod 'iPod' cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable.

    I got a new ipod touch for Christmas.
    Today I was going to put music on it, i was told there was updates.
    So I went ahead to do them.
    My Ipod is stuck on the screen with the usb cord pointing to the itunes logo.
    In Itunes i'm told :
    Itunes has dected an ipod in recovery mode. You must restore this ipod before it can be used with itunes.
    Turning the ipod off - the same screen appears when it's back on.
    When I click restore ipod and after restore and update is clicked ; Extracting software loads up at the top.
    When its done this is the message I get:
    The iPod 'iPod' cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable.
    I've been looking up trying to figure it out myself and have read making sure a setting in Lan Settings in Internet Properties has ; Automatically detect settings checked. I still get the same ipod message.
    I've tried holding the power and home key to turn it off, then powering it back on. But that doesn't work.
    I installed itunes today, so its up to date - I checked.
    I don't know what else to do.
    Can someone help me out, please? :}
    The operating system was ios 5 something? It wanted to update to 6 i believe.

    I've tried the top part but now that i've looked to the bottom:
    Additional Information
    The “hosts” file may also be blocking gs.apple.com.
    Select the hosts file (normally you can find your hosts file at C:\WINDOWS\SYSTEM32\DRIVERS\ETC).
    I put this in the url bar?
    When it gives me the list of names, im not sure what to do from there. The steps aren't that clear for me.

  • I have an iPod 4G, but I can't update to iOS 5. When I click on 'update' in iTunes it says 'The iPod server cannot be contacted' I have tried everything, even re-installing iTunes. Plus I cant update on the iPod alone. How can I update to iOS 5?

    I have an iPod 4G, however I cannot update using iTunes. It says 'The iPod software update server could not be contacted. Make sure your network settings are correct and your connection is active.' I have checked my connections, they're fine. My apps won't update because it require iOS 5, it's currently 4.3.5. Also, I cannot update using my iPod only. What to do to update iPod?

    Have you looked here:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

    My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

    Hello jraff21,
    I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
    The iPhone [device name] could not be restored. An unknown error occurred (4005).
    The iPhone [device name] could not be restored. An unknown error occurred (4013).
    The iPhone [device name] could not be restored. An unknown error occurred (4014).
    Try these steps to resolve the issue:
    Install the latest version of iTunes.
    Restart your computer.
    Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
    Restore using another USB cable.
    Learn more about updating OS X.
    Learn more about updating Windows.
    Restore your device on another computer.
    If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
    Learn more about other update and restore errors.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • My iphone 5 is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and it won't recognize it or anything. what can i do?

    my iphone 5 is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and it won't recognize it or anything. what can i do?

    Turn it off by holding home+ power button untill the screen goes black ( as soon as it goes black, release the buttons).. This might take some practice , so dont worry if on the first try your phone reboots and goes to itunes screen again.
    Now, with your phone powered off, enter DFU mode:
    Method 1)
    Attach the phone to the pc
    Turn the phone off
    Hold power and home together for *exactly* 10 seconds
    Release power but keep holding home until the pc beeps as a USB device is recognized.
    Whilist in dfu mode, itunes will recognize the device and it will ask you if you wish to restore it. Simply click restore, and the restoring proces will begin.
    This will hopefully fix your iphone.
    Cheers

  • My iPhone 3gs is stuck on black screen with the apple logo, help

    my iPhone 3gs is stuck on black screen with the apple logo, help

    then get it replaced if that doesnt work or try to le tthe battery die and recharge

  • My iPhone 5s is stuck in large screen and won't allow me to swipe or turn off...what to do?

    My iPhone 5s is stuck in large screen and won't allow me to swipe or shut down to turn off. Help! thanks

    Most welcome!
    Cheers,
    GB

  • HT201263 I see the "Connect to iTunes" screen and the device appears in iTunes. Everytime I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete

    I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.

    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up pictures

    I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up all of my pictures from my phone.

    If you backed up the device, all the data is in the backup. Restore the backup.
    A better question is why would an intelligent person not copy the pictures from the device to the computer regularly, especially before attempting an update, as the device is designed to be used?

  • I have a Iphone4. Trying to update from 4.3.3 to IOS 5 or 6.  There is no 'Update Software' button under Utilities/General. Tried updating using Itunes but it comes up 'The Iphone software update server cannot be contacted' ????

    I have a Iphone4. Trying to update from 4.3.3 to IOS 5 or 6.  There is no 'Update Software' button under Utilities/General. Tried updating using Itunes but it comes up 'The Iphone software update server cannot be contacted' ????

    iOS 4.3.3 doesnt have the "Update your Software" tab so you will need to go to itunes and back up your iphone then restore your iphone and it will download the latest iphone software (6.1.4) if you dont want 6.1.4 download your current version and hit shift on your keyboard (alt if your on Mac I think) and click restore iphone and find your downloaded software 4.3.3 then download iOS 5 or 6 and do the samething after your phone boots up from restoring it to 4.3.3.

  • IPhone 6. While talking on the phone, email interferes w/audio for other party. Email message pops-up on the screen and the other party cannot hear me until I click "close" & remove the message. Ideas??

    iPhone 6. While talking on the phone, email interferes w/audio for other party. Email message pops-up on the screen and the other party cannot hear me until I click "close" & remove the message. Ideas??

    Alex, thanks for the reply but it did not answer my question. I only want to turn off notifications & interruptions while I am on the phone. For this desired result, the only way the Do Not Disturb feature would help is if I manually turned it on before each phone conversation. Since my phone rings at random times, this is not possible. Basically, I just want to "opt out" of call-waiting. When I had a landline I never had call waiting. I don't want to be interrupted. But beyond that, even if I am being interrupted why are these notifications preventing the other party from hearing my voice?

  • HT201210 my ipad2 show itunes and the usb but in my macbook shows iphone software update serves cannot be contacted... pls. anyone can help.

    my ipad2 show itunes and the usb but in my macbook shows iphone software update serves cannot be contacted... pls. anyone can help.

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem
    Diavonex's reply is not pertinent to your problem at all

  • Iphone 4s is stuck on apple logo and the power button is broken.......Also, the phone has not been jail broken......HELP?

    iphone 4s is stuck on apple logo and the power button is broken.......Also, the phone has not been jail broken......HELP?

    Greetings bruce0bruce,
    It seems your device is not functioning, and the Sleep/Wake button isn't working as well. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • HT5704 after updating to ios 6.1.3 seems my factory unlocked 3gs is not working, i cant even restore..the message displayed is "itunes software update server cannot be contacted" 'm using latest itunes with winows xp system...........please please help me

    after updating to ios 6.1.3 seems my factory unlocked 3gs is not working, i cant even restore..the message displayed is "itunes software update server cannot be contacted" 'm using latest itunes with winows xp system...........please please help me

    There is no such thing as a "Factory Unlocked iPhone "
    They are either locked to a carrier who may at some stage offer unlocking
    or sold direct to a user by Apple (from their own Stores or online .)
    Those iPhones are NOT locked
    Where did you get your iPhone
    If from Apple try this
    http://support.apple.com/kb/HT1808

  • Iphone software update server cannot be contacted

    think i posted this in the wrong place
    whoops!
    here we go again:
    I am trying to update my iphone software to 5.0.1, and everytime i do I get a message saying "Iphone software update server cannot be contacted -make sure your network settings are correct and your network connection is active and try again later"
    This has been going on for weeks, and I've tried everything
    I have turned off firewalls to the best of my knowledge
    I did that thing where you go to the LAN tab and choose detect settings
    I've downloaded the newest version of itunes
    I'm not very technologically savvy, so if anyone can help me - i would need a pretty clear walk through of what to do
    I really want to get this zombie jogging app, but my iphone needs to update before it can get on the phone
    someone
    help me
    be merciful

    Plz help!!!!!!!!!!!!!!!!!!
    i am facing same problem.....from two days i am unable to update my iphone........
    plz anybody help....

Maybe you are looking for

  • Apple TV on tv with receiver - not working

    Hi...are there any tricks to setting this up?  Tried hdmi from Apple TV into receiver....worked for 1 day, then "no signal " (on ANY input/HDMI tv port) - by the way, I got a HULU 3 for Xmas  and the exact same thing happened.  Only worked for 1 day.

  • Gibson Dark Fire guitar

    Gibson has done it again!!  After creating a new chapter in guitar history with the Robot Guitar, they have brought the technology to a new level with the Dark Fire.  Based off the classic look and beauty of the original Les Paul design that has been

  • IPod Firewire 10 GB Mac-formatted. Windows doesn't recognize it

    Hello, folks, I'm iPod newbie, got older 10 Gb Firewire touch wheel iPod recently and trying to connect it to PC. PC has Belkin Firewire card. I've charged ipod, then reset it, installed iTunes, Xplay and MacDrive software on my PC. When i connect ip

  • Invalid serial number during first install

    Just wrapped off the seal on the OS X SL Server i just got. But when i come to the part of the installation where I´m supposed to enter the serial that came in the box, i get the following message: "Invalid serial number entered Setup requires a vali

  • PUT QUERY RESULT ON ONE ROW INSTEAD OF MULTIPLE ONE

    Hi I have two tables with the column id_table1 to join them. My first table "table_one" contain 3 fields and one record. id_table1 : 1 table1 : project1 date_project : 2005/08/01 My second table "table_two" contain 3 fileds and 3 records which contai