My iPhone 6 will not auto rotate after installation of version 8.0.2. The auto rotate lock is off in settings and in the Kindle app, but nothing will go to landscape.
Since the installation of 8.0.2 my iPhone 6 will not auto rotate in any app. I have locked/unlocked the feature in settings several times using the command bar but to no avail. I read using the Kindle app and it also is locked in portrait whether the lock is on or off.
Edselbe wrote:
Your auto lock got turned on. Swipe up on the screen and tap the upper right icon. This will allow it to work again!
Actually, the OP tried that (six months ago) and it didn't work. They resolved the issue (six months ago) by updating their system software (six months ago).
Similar Messages
-
I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work
So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
Reboot both the computer and the phone and try again. -
My computer is saying that I am not in the US and so I am unable to view shows, Youtube, etc. I've gone under the location settings and put US several times but nothing has worked. What should I do?
It may not be your computer telling you this, it is probably the company providing the shows to you over the Internet. If that is the case, no setting on your computer can change it because the media company is going by your network address (IP address), which is where your Internet modem (cable or DSL) connects to the outside Internet. If the location of your Internet connection appears to be outside the US (even if it is mistake), media companies that distribute shows under contracts with geographical restrictions may lock you out.
If you use a service like a VPN service, you may have the ability to use IP addresses from other countries so that you can appear to be connecting from there. But it takes some setting up. -
Dear Supporters,
Last night when i installed new software through connected by itunes the software installed but now just detailed below when i try to start give bellow options and than not working
1st, language. i select ENGLISH
2nd Country, i select PAKISTAN
3rd, wifi, i on wifi
4th, activateing your phone and in runing condition
''it may takes a few minutes to activate your phone'' after this option the error comes which is bellow
''TRY AGAIN
your iphone could not be activated because the activation server is temporarily unavailabe. Try connecting your iphone t iTunes to activate it, or try again in couple of minutes''
so please kindly resolve this above given problem
thanks
Regards
Javed Hussain Karachi PakistanGenerally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
One day the phone just got stuck on ios6 screen then once unlocked it said plug into iTunes. Once I did the phone will not allow me to complete a restore. At the last stages the phone will cut off. I have asked a friend to have a look and he thinks it is stuck in recovery mode loop? I don't know what else to do. The phone is not under warranty and I bought it second hand before Christmas. Please give me any help or advice.
Sounds like a hardware failure. Make an appointment at the genius bar of your local Apple Store. There is no magic that can fix a hardware failure.
-
Thanks in advance!
you have the purchased (not subscription) version of lr 6 (as an upgrade to lr5).
if all that is correct, then when you start your lr 6 installation you will be prompted for the lr 6 serial number. if lr 5 is not installed you will then be prompted for your lr 5 serial number.
if you enter the correct number at the correct time, installation should proceed. -
I have downloaded the kindle app but I am unable to registrar as it keeps saying username and password incorrect ( I don't rember using this app before) and I am at a loss at how to reset
Are you entering your Amazon account id and password ?
-
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
Windows xp will not boot up after installation of desktop software 4.3.
windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???
I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer. -
HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2
My iphone 5 does not ring anymore after upgrading to ios 7.0.2. It did not happen right away, but maybe 2 weeks ago. I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in. I also turned my phone off and it still only vibrates when calls and messages come in.
I found another feed and said there is a silent button next to volume bar. That was the problem.
-
After update iOS7, my iphone 4s not able to connect any Wi-Fi. I tried all the possible ways, but faild.
Settings > General > Reset > Reset Network Settings
-
AirPrint - iPhone 5 can not find printer after router change
AirPrint - iPhone 5 can not find printer after router change; however router is exact replacement of previous one (Zyxel, issued by Imagine wireless). AirPrint was working previously. Printer is on same network. Wireless printing working fine. Have tried rebooting prtiner, phone and router. Any suggestions?
I'd look to HP for support.
Here's an HP Airprint-related trouble-shooting page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03314085&tmp_task=solveCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=5271613
Lots more info on the HP support site. -
My Ipad will not come on after reset. All i get is the little white apple to appear that is it. Any suggestions ?
Hi Dawg70,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
Judy -
My iphone 4s crashed today and will not go back on. I see the apple logo, but nothing else will happen.
Hello jaicob1990,
Try the steps in the article below; it will give you multiple options on how to resolve the issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!
Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.
Maybe you are looking for
-
Basicly ive had this fone for about 3 days. and suddenly it wouldnt turn on.. it just froze when it got to the the 'nokia' bit at the start so i took the battery out,put it back in and turned it on again... still no luck so i took the standard 64mb M
-
Why is it that I can receive but not send mail in my iPad? I can do so if I reset the password, but I must do this every time I want to send mail. This is absurd, cumbersome, and utterly impractical. Any help would be greatly appreciated.
-
Uploading multiple excel sheets
Dear All, We are having 4 different excel sheets where data is stored regarding the quantity of laptops, desktops, printers & xerox machines. This data is to be loaded into the SAP tables with Co Code & BA Code as primary key which is there available
-
How can I set up under https 1.1 a proper host header using the url class? I tried it a couple of times in proxy environments and I got back the message: ?Missing host header?. Many systems do ignore the host header and it works fine. However typical
-
Lync Inactive Timer Not Working - Starts after 5 minutes rather than 20 minutes
I have a client who has her Inactive timer set to 20 minutes. I verified that the registry entry is set as such. We have rebooted her system and cleared her Lync cache files. She does not have a screen saver set, and her plugged in power setting f