My iphone came up with that timing circle and just turned off and did not come back on ? even when i charge it now it still wont turn on ,do you know the problem?
my iphone came up with that timing circle and just turned off and did not come back on ? even when i charge it now it still wont turn on ,do you know the problem?
If the battery was empty (and it may then take 10 to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
Similar Messages
-
I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?
Plug it into power for at least 15 minutes. If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
IPhone 5 spontaneously turned off yesterday will not come back on
Yesterday while charging my iPhone 5 it just turned off. No impact or anything it was just sitting there. Unplugging and re plugging the charger does nothing. Pressing and holding the home and power button does nothing. Trying to connect to iTunes does nothing. When plugged to the PC I get "USB device not recognized." I also keep getting this message is I press in the home button so I'm getting some kind of communication between the PC and phone. The phone has been slow and apps have been freezing since iOS update and now this has happened. I'm not sure what else I can try. Has anyone else experienced this?
Do the reset again, but this time hold the two buttons until you see the apple logo and then release.
-
my iphone completely turned off and will not come back on, even when connected to the charger. how can i turn it back on?
Hello ozzy9294,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Best of luck,
Mario -
Recently while playing my IPOD 5th Generation on my automobile deck I saw error 19 appear and it powered down and did not com back on. I jacked it onto a computer and saw error 49 come up. Can anyone help with what the problem might be?
What were you doing when you received error 49 on the computer?
-
my ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help
Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M. -
My iphone 4s has switched off and will not switch back on even when its connected to power charger or laptop. can someone help please
Just read that someone had the same problem on 3gs and someone had replied to press the home button and power button at same time, so I tried this and within a few seconds my phone had switched itself back on.
-
i recently purchased used macbook pro 15" but unfortunately i erase the harddisk and did not have back up but when i try to reinstall the mac os x lion it ask me the id password,how i can purchse the mac os x lion.
where from i can buy the mac os x lion because i am using windows base system when i try to buy from apple web side it show in app store only not in itunesHave you tried booting from the Recovery HD to reinstall Lion?
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
You will need the Apple ID and password used to purchase Lion. If you have not purchased Lion, then you will need to purchase the Snow Leopard DVD and install Snow Leopard then update it to 10.6.8 to access the App Store where you can purchase and download Lion under your own Apple ID. Or you can purchase the Apple USB Lion installer flash drive at any local Apple retailer or the Online Store. -
Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!
For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download -
Does anyone know how I can get all my pictures back on my I Phone whaich has been backed up by I Cloud? My I Phone 5 has been replaced because of a broken on off button. Only some of my pictures have come through. I'm not sure if it takes more time or not.
Any info will be greatly appreciated.
ThanksMany users have lost photos while preforming a restore from backup or upgrading the iOS. Recall, only photos in the camera roll are backed up to iCloud. There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
See:
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream. If using Photo stream, but sure to move the received photos to a permanent album. If you have been doing that, then you can sync those photos back to your device.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered. I'm afraid I have no advice in this case - there is no "cure". -
my iphone 4 froze while syncing an update. i got it running by restoring it to original settings. i synced with computer but pictures wont come back. How do I get them?
When the restore finished, did you "Set up as new phone" or "Restore from backup?"
When was your last backup? -
Do you know the problem?
Hi
I am writing an applet where I use keyDown function of Java and also I use stereo sounds.
When I am running the applet using the Internet explorer, it does not play the stereo sounds, only the mono sounds and also when I am pressing keys it works fine. However, when I am running the applet using the appletviewer then all sounds are played but when I am pressing any key it does nothing.
Can you please explain me that and how can I run the applet and have both, play all the sound (stereo and mono) and pressing keys works fine?
ThanksThanks for your response
I don't think that this will help me because even when I don't use stereo sounds when I am running the applet using the appletviewer when I press keys It does nothing -
When I go to open my phone normally my pass code screen pops up. It was working fine all day and then all of a sudden it started freezing. If I slide the bar across to open my phone it just freezes on that screen and I can't get into my phone. I had to shut my phone completely down to get in. I tried to turn my pass code off and I can't even get into that screen. So please help!
Try resetting by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
Ipad2 came without messages app. Please help me in figuring out why! :)
What version of iOS have you get (Settings > General > About > Version) ? Messages was introduced with iOS 5, so if you aren't on that then you can update to it and you should get the Messages app.
Connect the iPad to your computer's iTnnes and copy any purchases off the iPad via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
Maybe you are looking for
-
I have a email address . It is not possible to buy icloud storage for it or to add to my first account where i have plenty of icloud storage available. <Email Edited by Host>
-
Problem using Epson V600 scanner in Photoshop CS2
The scanner opens its dialogue window, no problem. I can do a Preview scan without any problem, but when I request a Scan, this progresses properly, but the resultant scan is presented in the Photoshop workspace on top of the Epson dialogue windows.
-
RT31P2 + WRT54GL + Vonage problems
Hey guys, I've been having a recurrent issue for a while now, and lately the problem has gotten a lot worse. Before I describe the problem, I would like to explain the exact set-up that I have to better explain the situation. (I have had this set-up
-
Hello experts, We are working on an ECC 6.0 implementation for IAS/IFRS. Therefore, it is necessary to have two accounting ledgers (IFRS ledger and Legal ledger for the country - Chile) in order to support two different kind of material valuation (on
-
Whether I'm watching a DVD or playing MP3's off of my hard drive, I get this weird stop and go along with a 'honking' type sound. Sounds kind of like the buzzer when you get a question wrong on Jeopardy. I posted this almost a month ago but got no re