My iphone is not responding and the screen is glowing black. How do I get it to turn on?
How do I fix this? I was just using my phone when it went black. The battery was at 48 % when it turned off. What could be the problem?
this happened to me and what i did was let it go flat and then charge it and it worked. i dont know if this will help but this is what i did when my phone went black.
Similar Messages
-
New iPhone 5c keeps beeping and the screen just stays black.
new iPhone 5c keeps beeping and the screen just stays black?
Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.
-
I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get them imported into Word?
Hi,
I checked your account,your Export PDF subscription is in 'Pending' status.
Once it gets confirmed you will be able to use it.
Please let us know if you require further assistance.
Regards,
Florence -
The app game that I bought for iphone is not available in the itunes store anymore. How can I get it back on my iphone 4
If it's no longer in the store then you won't be able to re-download it - do you have a copy of it on your computer's iTunes (or on a backup) that you could sync back to your phone ?
-
I just got a new Dell Optiplex computer with Windows 7. I installed Firefox 19 on it. The web pages come up narrow, with borders on each side. So the content of the screen is smaller than what I've gotten in the past with Firefox 3.6 on my previous computer. I did the Full Screen command, and that only made the screen taller rather than giving me a full screen (such as I get with the same web pages in Internet Explorer). I've also tried enlarging the text, but that throws off the format of the web page so some parts of it overlap.
What can I do to get a full screen, including full width?
There is a box below this Details box called "Troubleshooting Information" which says I should click Allow and then click Install. Since I don't know what would be installed on my computer, I did not do it.The Troubleshooting Information extension adds some useful information to your post, but in this case, I don't think it's really needed.
Zoom is your best bet. To make it work for you, I have two suggestions.
(1) Switch from "text only" zoom to "full page" zoom. This is proportional like in IE.
View menu > Zoom > ''uncheck'' Zoom Text Only
If you are using the compact menus with the orange Firefox button, tap the Alt key to display the full classic menu bar.
(2) Install an extension that can default your view to a higher zoom level automatically to save time when visiting new sites. Here are two candidates:
* [https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ Default FullZoom Level]
* [https://addons.mozilla.org/en-US/firefox/addon/nosquint/ NoSquint]
With that combination, can you minimize your eyestrain? :-) -
We are novice users of an Ipad. Have recently taken many video clips at a wedding. Ipad now displays message "Not enough storage this Ipad cannot be backed up because there is not enough Icloud storage available etc" Neither option "close" or "settings" will respond and the screen quickly goes blank. Any help would be welcome. Bob.
A reset may help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. Release both buttons and await restart.
-
The display of my iphone is not responding amd the LED is on. What does that mean?
However i can't check settings because the display does not respond, i tried to use three fingers, but nothing happens. It can receive phone calls and notifications, but the display still is not responding so i can't answer phone calls. But now the Led is off.
-
My ipod classic 120 wont respond and the screen is frozen
my ipod classic 120 wont respond and the screen is frozen
Hello Charles,
What happens if you try to do a hard reset? To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear. This may or may not work the first time around so be sure to attempt this at least a minimum of three times.
If the iPod remains frozen, let the iPod's battery drain completely, but attempting to recharge the iPod.
B-rock -
My iphone 5 won't unlock and the screen fades to black.
My iphone 5 won't unlock and the screen fades to black. I can't answer calls or texts. help!
Hard Reset
Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
Peace, Clyde -
I was re-naming a folder with many sub folders attached, suddenly, Thunderbird did not respond and the folder I was re-naming disappeared along with all the sub folders attached to it. How can I get them back? I am not a computer savvy person. Any help would be greatly appreciated.
Thank you.
[email protected]Turned out that my anti-virus was doing a scheduled scan and had found a virus in an email attachment in my deleted items folder, thus nothing being able to do during the scan.
-
It seems that my iphone 4 8gb verizon burnt out when i plugged it in my car charger and the screen went completely black and my iphone was hot when it happened any help how to fix it?
kriss1692 wrote:
I cant use my phone
So use a different phone...
and i dont remember my serial number on it
-> iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
so i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?
It means you should take it to the Genius Bar. You will no doubt need to buy an out of warranty replacement.
-
my aluminum screen cover has come loose ,it seems as if the glue holding the cover and the screen has come loose how can i fix it
its the 2009 15" macbook pro its not under warranty anymore im hoping to be able to fix it myself but im not to sure how
-
I have a powermac G5 running 10.5.8 I kept getting a screen that told me to upgrade, which I did, then was told it was not compatible and now I have nothing.
How can I get back to my old system or download one that will work.'''bold text'''Firefox 4+ versions don't support the old Power PC architecture.
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/<br />
http://tenfourfox.blogspot.com/ <br />
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported -
My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!
Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!
Maybe you are looking for
-
How to access for Virtual machines in System Center 2012 r2 by remote console through code?
Hi All, I am new in System Center. I am using System Center 2012 R2. I have a web application written by dot net, which shows the list of virtual machines created in the SCVMM. Now, I need to select a Virtual Machine from the list, and click a link
-
Black screen. NVIDIA 8600M. Dispute with local repair service.
Hello, I'm looking for help, presumably for a situation with bad nVidia chip descried in article TS2377. If any Apple technicians are here it would be great! My local service provider privately told me that the main Russian service (where all local s
-
Persistent views in a MobileApplication
Is it possible using when using the new MobileApplication, ViewNavigator, and View to have a persistent view so that when you navigate away from the view to another view an activity in the first continues. I am thinking of mobile apps such as video
-
I'm running Thunderbird on Win 8.1, 64 bit, with Windows Defender and EMET. When I get malicious looking emails (some with attachments) I don't open them, but forward them to us-cert.gov and UCE.GOV reporting email addresses. I am viewing emails in t
-
Can we get row counts when using dbms_datapump?
When using dbms_datapump, is there a way to get the rows loaded for each table, similar to the log files when using the command line? I can't seem to find anything. I'm trying to import. Database is 10g r2.