My ipod was disabled and says connect to itunes,but all of the videos and question say it will delete everying on my ipod. iCloud backup hasent been turned on either. I don't want anythin to be deleted HELP?
My ipod touch 4g was disabled yeterday, and i tried it so many times it say to connect to iTunes. I don't want to because all of the discussions I've read say it will delete all of my data. I have lots and lots of pictures and apps I don't want too lose. Some of them are very valuableto me. I didn't get the chance to turn iCloud back up on, and I really want to. is there any way i can restore my ipod without erasing all of my data. PLEASE HELP, I REALLY NEED IT! By the way my Sleep/Wake button and my volume buttons don't work, so I use assistive touch, my home button works though.
You cannot enable without restoring it and losing everything you have failed to save to your computer.
This is one of the many reason it is very important tostore everything on your computer/cloud service. Nothing should only be on the ipod.
Similar Messages
-
my IPod is disabled and says connect to iTunes but when I plug it in it says I need a password. I would put it in recovery mode but my home button doesn't work. any suggestions?
Use the method listed in this previous discussion for placing the iPod in Recovery mode without buttons
Turn on without Home/Power Button -
HT1212 my ipad says connect to itunes but doesnt allow the passcode to be entered
I apparently disabled my iPad when I didn't turn the keyboard off. It says I need to connect to itunes but when I do it says my ipad is locked...seems like a viscious circle.
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
my daughter had disabled her ipad by putting in passcode to many times, says connect to itunes but then it wont work and says passcode needs to be put in
Follow the instructions in this article http://support.apple.com/kb/ht1212 and you should be able to fix the ipad but keep in mind there is a it is very likely that you will lose all information on the ipad following the instructions in the article
-
My little sister kept typing in the wrong pass code for my ipod touch and now its disabled, and says connect to itunes but i can't unless i'm on my ipod. so please comment helpful solutions!!!!
http://support.apple.com/kb/ht1212
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
-
When I got my ipod I made an account with iTunes right from my ipod.Yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered on the computer. I've tried holding the home and sleep/wake button for 10 sec and then only the home for 5sec and that might have reset it, but it didn't help. If any of you guys know what to do so I can unlock it I would appreciate it VERY much.
If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
Follow the instructions here: iPhone and iPod touch: Unable to update or restore -
My ipod touch says it is disabled and to connect to itunes, but it won't let me. It is froze....what can I do?
Connect in recovery mode to restore, explained in this article: iOS: Unable to update or restore
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
copied from iPhone and iPod touch: Wrong passcode results in red disabled screen -
ipod touch is saying it is disabled and to connect to itunes but when i do it asks for a password ?
copied from iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document. -
my ipod is disabled and says connect to itunes but when i connect it dosent let me connect cuz it says it has a passcode so i can get it out of disabled mode what can i do
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my phone is disabled and says connect to itunes but i want to recover my data's and pictures before restoring it with itunes.
You may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
If you haven't synced it to that computer before then you won't have a backup on it to restore your content from. Do you have any of your content on it for re-sycning and/or have you been backing up to the cloud ?
You can re-download your apps (if they are still in the store) via the Purchased tab in the App Store app, and you may be able to re-download music, films and tv shows via the Purchased tab in the iTunes store app. -
My daughters ipod is disabled and says 'connect to iTunes' but when we connect to iTunes it says ' cannot connect to the ipod because it is locked with a passcode ' but we can't unlock it because it is disabled, how do we fix this???
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My ipod touch is saying its disabled and to connect to itunes but when i do that it does nothing, what can i do to fix it??
If your iPod has been disabled due to multiple incorrect passcode attempts, restore the iPod from the computer to which the iPod is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
Hi, my iphone is disabled now and it says connect to itunes but there are some problems to fix it .
Firstly, i reset my computer few days ago and never used itunes after that .
Secondly, the power button on the iphone is broken so i can't set the recovery mode on the phone.
I Tried connect the itunes with the iphone but the all itunes says 'To allow access , please respond on your iphone' but there's nothing i can do,
iphone doesn't respond at all .
I need some help .... i tried everything i could do ..Hey jinyoung_20,
Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, and express replacement service:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
My iPad is disabled and it's saying connect to iTunes but iTunes' is saying that you need to enter you iPad password...
Those Links are working here...
Try this one,
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097
Maybe you are looking for
-
How to turn off charge alert?
Since I have loaded GDR2 & 3 the charging alert sounds in the middle of the night waking my wife and me. When I place the phone on the wireless charger the charging alert sounds as it always has but what is new is that the alert will sound again some
-
Noise Reduction on slideshow or image export
Hello, does any one know why the Noise Reduction does not work when creating a slideshow or exporting the image ? It simply ignores my noise reduction settings.
-
How to report an offensive post in the discussion?
Well, the topic says it all. How can I report an offensive post in the discussion?
-
Dimension: Automatic Updates of Lower Level Records
Hi - In a dimension, when the parent level record gets updated, does OWB automatically update the child records too? For example, lets say I have two levels - Product Category and Product. So, the product records will have the product category attrib
-
When is the ear file created , is it on deploy or when the project is built
When is the ear file created , is it on deploy or when the project is built in which case whats the path on the file system??