My Macbook pro 1,2 monitor and laptop screen goes black once in a while and then comes back on

Hello all,
Thank you very much for taking the time to view my issue. This issue just started about a month ago, I have a 22" LCD Monitor that I have been using, when this issue started the monitor would flicker and the screen would go black, but if I turned it off for a bit then turned it back on it would come back on. After a while it just started to go black and not come back on at all, so I decided to disconnect the monitor and use the notebook screen, I thought the monitor itself was broken. The notebook screen was working fine up until the last week, it is now doing the exact same thing, when my computer wakes up from being asleep it sometimes flickers then goes black, I can still faintly see the outline of the programs I have up but it is completely black. Sometimes it is a pain to get back on and I have to force shutdown and turn it back on to get it working. I am not sure what the problem is but I really want to get it fixed.
My Macbook Pro 1,2 is the first model made, but it was the best model available at the time. It has a Intel Core Duo 2.16GHz chip with 2GB of ram and a 160GB hard drive, it also has an ATI Radeon X1600 video card with 256mb of Vram. If anyone has any suggestions or resources I can use, I would greatly appreciate you sharing them with me.
Thank you very much in advance!
Sincerely,
Saggz.

Hey Fleurdemimi,
Thanks for the question. I understand you are experiencing issues with your iPhone 4s. Based on the information you have provided, restoring your iPhone in recovery mode may resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Similar Messages

My ipod touch is flashing white on and off, I hold the buttons down, and the screen goes black- but the apple logo does not come on. What do I do?

So I have had this problem before, and know that you hold down the top Power button and the Home button, at the same time, for roughly 10 seconds, or until the apple logo comes on.
The problem is, when I press the buttons and the screen goes black, like it's supposed to before the logo pops up, the apple logo isn't appearing.
I was wondering if that's because my I pod touch was drained when I plugged it in to charge, and I tried to turn it on when it was still charging?
What can I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

MacBook 13.3" (A1181), 2.16 GHz, screen goes black once OS is loaded.

I have a MacBook 13 (model A1181, 2.16 GHz) that I bought from a friend. Everything starts up fine, I get the chime, etc., until it loads the OS. I have a brand new Apple hard drive; brand new Mac OS X Leopard disk; and have tried everything I can think of. I have tried shining a light to see if the screen is just dim--no dice. I have tried completely wiping the drive clean on my iMac and then reinstalling. It gets all the way through the install, then the screen goes black when I'm trying to set my information up. The screen stays up if it's installing the OS, and also if I have the hard drive disconnected on the logic board. As soon as I load the OS, it goes black. The rest of the machine is still running. I have a spare logic board, so I put that in and I get the same problem. What am I missing? Any help would be appreciated. It may be useful to know that I am a computer repair technician (I do component repairs at a motherboard/logic board level). However, I believe all the hardware to be working. I think it may be a firmware issue, but I can't get it to keep a screen long enough to do any software updates. Anyone have any suggestions?

I actually considered that and replaced the inverter, as I couldn't find the cord to external display, but also to no avail. Same thing happened.

I have a macbook pro and the screen goes black for a few seconds and then it is fine..

it keeps doing this constantly. Goes black and then is fine. I tried to do the apple hardware test and it doesn't work. Ever since i updated the software on it it's been giving me problems. What do i do?

Nellinaaaa wrote:
13" mid 2012!
If you have AppleCare, call them. Let them deal w/it.
I tried to do the apple hardware test and it doesn't work.
Meaning? Please provide details.

[SOLVED] Connecting extra Monitor, laptop screen goes black.

Whenever i connect a additional monitor through HDMI (my only output), the laptop screen goes black. If i do FN + external_monitor switch, then the laptop screen turns on but the external monitor turns off.
If you move the mouse you can feel that the desktop has been extended as i wanted, it is just that one of the screens keeps going black. The gnome display settings show both screens as active, the menu is so minimalistic that there is not much to do.
system
[cristobal@orion ~]$ uname -a
Linux orion 3.11.4-1-razer #1 SMP PREEMPT Tue Oct 8 12:31:50 CLST 2013 x86_64 GNU/Linux
As a side note, the custom kernel is almost identical to the original archlinux one, just that USB 3.0 module is disabled.
some packages
[cristobal@orion ~]$ pacman -Q nvidia-dkms bumblebee bbswitch-dkms nvidia-utils gnome-desktop
nvidia-dkms 325.15-2
bumblebee 3.2.1-3
bbswitch-dkms 0.7-1
nvidia-utils 325.15-1
gnome-desktop 1:3.10.0-1
Any ideas?
Last edited by labotsirc (2013-10-15 18:33:18)

The problem is now fixed,
For some weird reason, this time the gnome settings did work. Must have been some sort of rare bug that now i cannot reproduce.
Last edited by labotsirc (2013-10-15 18:32:53)

My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

Lol, figured out the first part. Just for those who may be searching, when you click on the Display Preferences, and click on the arraingment tab... it not only shows where your two screens will be displayed, but the WHITE BAR at the top of one screen is the dock/toolbar. Click and hold to grab this and just slide it over to the screen you'd like it to be on.
You have to release it IN the screen box, not on top of it... and it should pop right over to the new (or old) screen. At any rate, you can put the dock on either (or any) screen that you prefer.
I am thinking of ordering more of these. Lol. 3 monitor setup seems like it would be crazy good.
Still looking for the answer to keeping the new 16" screen on the right without switching between screen #s with that... not expose... Lion feature.
Thanks. Hope my other question has an answer out here.
Paul H

Laptop screen goes black when HDMI connected to TV

I have a Thinkpad Edge 431. I've set it up in Control Panel to duplicate both the laptop and the external monitor when connected by HDMI. It works fine.
When I connect it to my TV, the laptop screen black. The TV displays "No Signal" until the HDMI connection is made. When the laptop screen goes black, so does the TV screen. No sound or picture.
This was working fine until recently, and I can't figure out if I somehow changed settings to make this happen. It's clear that to me that the HDMI port on the laptop works, as does the cable.
The TV port works (I've switched the connection on the cable box to each HDMI port on the TV, to make sure they work).
I can't change anything in Control Panel when I connect the HDMI, because the screen is black.
I've updated the Lenovo system.
The other relevant piece of info: the Intel Graphics Card control panel says that Monitor/TV Settings are not supported (although until recently, I could easily display the computer on the TV).
Can anyone help with this? Thanks!

No video and audio signals to the tv connected

HT4436 On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

HT201263 None of these answers help my problem. My ipad will not leave the Apple logo. I hold both buttons and the screen goes black, then the apple logo immediately pops back up. I can't do anything because the apple logo just keeps popping back on.

I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore

Whenever I try to run Dreamweaver it crashes and the screen goes black

Whenever I try to run Dreamweaver it crashes and the screen goes black. However, when I open photoshop it opens perfectly. Please give me a solution.

can you please post your OS version, DW version and Crashlog if on MAC

I dropped my iPad and the screen went blank. I cannot get it to come back on.

I dropped my ipad and the screen went blank. I cannot get it to come back on.

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. If that does not work you need to take the iPad to an Apple store genius bar to have it evaluated by the technicians.

Why does my iphone 3gs screen goes black after reaching another party and won't come back on to press end the call

why does my iphone 3gs screen goes black after reaching another party and won't come back on to end the call

hi smalley3,
Welcome to the Forums.
The flickering issue maybe due to a bad LCD cable or in some cases, a faulty GPU (the GPU is integrated to the CPU, and the CPU is soldered to the motherboard).
If there's still no image on the screen even after connecting an external display then you likely have a bad GPU.
In this case, I recommend you contact support for service (and also to see if there's a consideration that can be done on the warranty repair).
Support phone list
Regards

When I boot into Win7 I see the windows boot up logo, the. I see my mouse and the screen goes black! It goes black in the login screen, I type my password and I hear the login sound but when I press F2 the brightness won't change! Please help!!!

When I boot into Win7 I see the windows boot up logo, the. I see my mouse and the screen goes black! It goes black in the login screen, I type my password and I hear the login sound but when I press F2 the brightness won't change! Please help!!!

Hi Emma,
Thank you for using Apple Support Communities.
I understand that your Thunderbolt display is just showing a black screen when you boot your computer. The following article should be of help in troubleshooting your display.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Cheers,
Jeff D.

Narcoleptic laptop - screen goes black while working

Hi ho,
About a week ago my mac started acting strange. I'll be working and the screen will just go black. (it just did it again! Sometimes if I'm listening to music on my mac, the music will stop, so it's not just the screen going black, it's like the computer goes to sleep out of the blue.
I was trying out bittorent for the first time and I'm wondering it it's related to that, if there is something I don't know coming on to my computer from the internet, please advise. I took bittorent off and it'll still appear. A window from Opera will open, so I took Opera off my computer in case there is something downloading. I never use Opera, so I don't know why it keeps coming up.
When it goes black, sometimes if I click the power button, I'll hear the disk repower up and the screen will go on, but it isn't all the time. Once I get it started again, it may be a few minutes and it'ss do it again without warning, or it could be 10 seconds. There's no rhyme or reason.
Another thing I notice is that the laptop will get hot, and I'm wondering if it's an emergency mechanism if the computer is getting too hot.
Please help, of course, I'm dead without being able to use my computer! And this is totally messing with my productivity!
Message was edited by: madamep

Hi, madamep. A properly-functioning Powerbook should put itself to sleep (not shut down entirely) before it gets hot enough to do real damage to itself. That may be what's happening with yours, as you say it seems to be getting pretty hot.
I suggest opening Activity Monitor and seeing whether something is using a lot of CPU cycles a lot of the time, thus generating extra heat. If you find that something is, and it's something you recognize and can comfortably turn off, do so. Then see whether the unexpected-sleep problem diminishes or disappears. If there's nothing drawing heavily on your processor, are you using the Powerbook on a soft surface (bed, sofa, lap, etc.) that's inhibiting airflow around the PB's shell and through its cooling vents? If so, don't: it needs unobstructed airflow all around it, including underneath — that's why it has little rubber feet, to keep it elevated slightly above your table- or desktop. Always use it on a hard, flat surface, and if the feet have come off it, replace them with something that will provide airspace under the PB at all times. Also check to make sure the vents haven't become clogged with dust or fuzz: use canned compressed air or a household vacuum cleaner (not the brush attachment — that can generate a lot of static electricity that's dangerous to electronics) to clean the vents from the outside.

My laptop screen goes black when i plug in an Hdmi cord

Initially I had both my tv and computer off. I connected the dvi to the tv and the hdmi to the laptop and turned them both on. I had no issue using my laptop as i tried to sync the computer to the TV. However i must have accidentally hit something in the graphics options as my laptop screen went black. I unplugged the hdmi cord from my laptop and the screen came back up. But now for some reason everytime i plug in the hdmi cord to the laptop the screen goes black. When i take it out it the screen comes back up. Did i change something that is causing this to happen? Any help would be greatly appreciated. Thanks

I have pretty much the same exact problem and setup as DaveA1. I have a Toshiba Satellite Laptop C55T-A5123 which I just purchased a few months ago and when I connect my laptop to my SONY TV via the HDMI cable the screen on my laptop goes black and the TV says no signal. It was working just fine up until about a week ago when I was watching a movie through my VLC player and then the screen flickered a couple times then video went completely out and I've never been able to get it to come back even once.
Here's the specs on my laptop:
http://www.newegg.com/Product/Product.aspx?Item=N82E16834114907
So far I have tried on two different TVs, swapped HDMI cables which work on my other HDMI devices, system restore and attempted to update various different drivers. I am curious to find out if Dave was able to find a solution to his problem.

My Macbook pro 1,2 monitor and laptop screen goes black once in a while and then comes back on

Similar Messages

Maybe you are looking for