My macbook pro opens eventually, then operates really slowly, freezing all the time.

HELP!!!! My Macbook which has been the pillar of reliability in its 3 years of life, however it struggles to open up now and freezes with a wheel whenever i try to open it up. Has anyone had any previous issues similar? I back it up regularly and as far as i'm aware it has plenty of spare capacity on the hard drive. Any thoughts??

HELP!!!! My Macbook which has been the pillar of reliability in its 3 years of life, however it struggles to open up now and freezes with a wheel whenever i try to open it up. Has anyone had any previous issues similar? I back it up regularly and as far as i'm aware it has plenty of spare capacity on the hard drive. Any thoughts??

Similar Messages

  • Macbook Pro screen showing green line and blacks out all the time

    My macbook pro have been recently showing green horixontal line all over the screen at times , and it goes away  after restarting couple of times, after i log in the screen black outs after couple of minutes and sometimes the screen act weird 

    I would suspect that there is a hardware component failing. I would take it in for diagnosis.
    Barry

  • MacBook Pro is slow and I have rainbow wheels all the time.

    Using Macbook Pro 17in with Snow Leopard. It is behaving like my old pc used to.

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Usually the HDD is the primary area that will have an adverse affect  on performance.
    Ciao.

  • Macbook Pro is slow, freezing all the time and has Wi-Fi problems

    Hello!
    My Macbook Pro started acting kinda strange a couple of weeks ago. It's slow, freezing all the time and constantly connecting and reconnecting to the Wi-Fi network after around half a minute of usage.
    Here is the story, as far as I know:
    In the start of 2014, pup-up boxes started popping up on my Macbook Pro. They said that I had to enter a password for the Keychain to gain access to a service or something. The odd thing about it was that I had never set up my iCloud Keychain. It just started appearing without me knowing why. Unfortunately, I didn't know the password for this due to the fact that I never set it up. I tried every password combination that could possibly work, but I didn't get through it. I tried different solutions, but nothing worked out. I solved it by simply making a new user account on my Mac. I used this for like 1 month before the whole Mac with all its user started messing itself up.
    It might be worth to notice that this secondary-user didn't require a password to log in, so when I closed my Macbook and re-opened it, it would continue where it was left off. This might have been the reason for the Mac sometimes to get really warm while being in my backpack, which might also have caused the problem. I am not sure though.
    After using the secondary user for a while, the Mac started acting strange again. This time it was something different. One day, my girlfriend started up my Macbook Pro and noticed that it was extremely slow. I assumed it was just in the need of a restart, but that wasn't it. The computer started freezing all the time at first. It froze when I clicked something in an application, and I had to wait like 10 seconds for it to go back to normal. If I was typing anything on Facebook, it would freeze, but I could still use any other tab of the browser without any problems. However, they would freeze to if I did anything special on other websites. Every other program would also freeze for reasons like typing or clicking on anything.
    After a short while, it started being really slow during startup and use. A few days ago, my Macbook Pro also started disconnecting from Wi-Fi networks while trying to load pages. It doesn't disconnect every time, but it does sometimes. It tries to reconnect after that, and if it succeed's, everything is back to normal for a while.
    Additionaly, the battery have been draining faster, and when it reached 0%, the computer turned off and closed all the open programs. Normally it has entered Sleep Mode, but not anymore.
    Do any of you have any clue what the issue might be?
    I have done the following:
    - Reset PRAM
    - Restore to system defaults
    - Installed AVG Antivirus and scanned it
    - Repaired and verified disk in Disk Utility.
    - Uninstalled Adobe Flash Player.
    I hope anyone can help me! I really need my computer for educational use!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD  com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/U.+\/Shared\//b'$'\n''s/(\/Users\/)[^/]+/\1USER/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//g;s/\).*/)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • After the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

    after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • I downloaded Yosemite to my macbook pro and now it is running extremely slow, freezing all the time. I did the Etresoft and copied the results as suggested to other  Please help me fix the issue.

    Problem description:
    I upgraded to Yosemite recently.  Now my computer acts like it has a virus although my virus checker says it is clean.  It is slow, freezes all the time, I have to turn off my computer to get it to work again.  I don’t like the new Yosemite.
    EtreCheck version: 2.0.7 (93)
    Report generated October 30, 2014 at 3:57:56 AM CDT
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 512 MB
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:26:55
    Disk Information: ℹ️
      APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 498.88 GB (434.65 GB free)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.devguru.driver.SamsungComposite (1.4.12 - SDK 10.6) Support
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.12 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.12 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.12 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.12 - SDK 10.6) Support
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.trendmicro.itis.dca.plist Support
      [running] com.trendmicro.itis.uimgmt.agent.plist Support
      [running] com.trusteer.rapport.rapportd.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.trendmicro.icore.av.plist Support
      [running] com.trendmicro.icore.main.plist Support
      [running] com.trendmicro.icore.wp.plist Support
      [running] com.trendmicro.itis.plugin.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
      [running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.amazon.cloud-player.plist Support
      [failed] com.facebook.videochat.[redacted].plist Support
      [loaded] com.trendmicro.itis.uninstaller.plist Support
      [running] com.zeobit.MacKeeper.Helper.plist Support
    User Login Items: ℹ️
      Flux Application (/Applications/Flux.app)
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Trend Micro Titanium Application (/Applications/TrendMicro.localized/iTIS.app)
      Dropbox Application (/Applications/Dropbox.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      Genieo Application (/Incompatible Software/Genieo.app)
      KiesViaWiFiAgent ApplicationHidden (/Applications/Kies.app/Contents/MacOS/KiesViaWiFiAgent.app)
      KiesAgent ApplicationHidden (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
      fuspredownloader ApplicationHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
    Internet Plug-ins: ℹ️
      o1dbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      googletalkbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 Support
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User Internet Plug-ins: ℹ️
      WebEx64: Version: 1.0 - SDK 10.6 Support
      NPRoblox: Version: 1, 2, 8, 25 - SDK 10.9 Support
    Safari Extensions: ℹ️
      Omnibar (Disabled)
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          14% WindowServer
          5% Safari
          4% Dropbox
          2% hidd
          1% lsregister
    Top Processes by Memory: ℹ️
      172 MB Safari
      142 MB softwareupdated
      90 MB rapportd
      66 MB Dropbox
      64 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      33 MB Free RAM
      1.40 GB Active RAM
      1.38 GB Inactive RAM
      1.08 GB Wired RAM
      4.82 GB Page-ins
      237 MB Page-outs

    Thank you all for the help.  My mac still freezes.  I've deleted what you suggested.  I hope it did it right.  Can you check and help me out?
    Also I went through the list and saw this
    MATSHITADVD-R   UJ-8A8
    Could this be the reason why my CD/DVD player quit working because it's crap?
    thanks
    Problem description:
    My macbook pro still freezes at times and i have to power it off and on again after downloading Yosemite.  This never happened prior.  This is my second time running etresoft.  I deleted the mackeeper as suggested.  What else is going on?
    EtreCheck version: 2.0.11 (98)
    Report generated November 4, 2014 at 10:26:26 AM CST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 512 MB
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 2 days 18:23:38
    Disk Information: ℹ️
      APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 498.88 GB (433.64 GB free)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/SmartSwitch.app
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.12 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.12 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungComposite (1.4.12 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.12 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.12 - SDK 10.6) Support
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.cmfsyncagent.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.icloud.fmfd.plist
      [failed] com.apple.rcd.plist
      [failed] com.apple.spindump_agent.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
      [failed] com.apple.warmd_agent.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.awdd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-weekly.plist
      [failed] com.apple.tccd.system.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.trendmicro.itis.dca.plist Support
      [running] com.trendmicro.itis.uimgmt.agent.plist Support
      [running] com.trusteer.rapport.rapportd.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.trendmicro.icore.av.plist Support
      [running] com.trendmicro.icore.main.plist Support
      [running] com.trendmicro.icore.wp.plist Support
      [running] com.trendmicro.itis.plugin.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.amazon.cloud-player.plist Support
      [failed] com.facebook.videochat.[redacted].plist Support
      [loaded] com.trendmicro.itis.uninstaller.plist Support
    User Login Items: ℹ️
      Flux Application (/Applications/Flux.app)
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Trend Micro Titanium Application (/Applications/TrendMicro.localized/iTIS.app)
      Dropbox Application (/Applications/Dropbox.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      KiesAgent ApplicationHidden (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
      fuspredownloader ApplicationHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
      KiesViaWiFiAgent ApplicationHidden (/Applications/Kies.app/Contents/MacOS/KiesViaWiFiAgent.app)
    Internet Plug-ins: ℹ️
      o1dbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      googletalkbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 Support
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User Internet Plug-ins: ℹ️
      WebEx64: Version: 1.0 - SDK 10.6 Support
      NPRoblox: Version: 1, 2, 8, 25 - SDK 10.9 Support
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          9% Safari
          6% WindowServer
          5% com.apple.WebKit.Plugin.64
          4% hidd
          0% authd
    Top Processes by Memory: ℹ️
      172 MB Safari
      146 MB com.apple.WebKit.Plugin.64
      56 MB WindowServer
      52 MB iTunes
      47 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      64 MB Free RAM
      1.13 GB Active RAM
      1.07 GB Inactive RAM
      1.10 GB Wired RAM
      23.40 GB Page-ins
      1.55 GB Page-outs

  • My Macbook Pro *****! I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button.

    I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button. a 2 week old computer is not supposed to do this! it wastes all its time being so flashy that it just craps out all the time. sometimes i feel like i should have stayed with my virus covered PC. at least when it shut down randomly you could turn it back on, but with the macbook pro, it just keeps restarting itself over and over. need help with this, any answers?

    Here's a novel thought. Take it back to the vendor. Should have done that one week ago.

  • This is my 3rd macbook air and pro that kicks me out my yahoo email all the time and tells me my password is wrong when its not this been going on 2 years 3 different macs sometimes it dont do it for months after a software update

    this is my 3rd macbook air and pro that kicks me out my yahoo email all the time and tells me my password is wrong when its not this been going on 2 years 3 different macs sometimes it dont do it for months after a software update

    Don't switch email providers. Switch to another email client on your Mac. It is not Yahoo. I have 3 Yahoo accounts and never have any problems getting or sending mail from/to those accounts. But I don't use the built in Mac Mail program. I use Thunderbird. I use thunderbird on both Mac OS X and Windows. Been using it for some time now with no problems getting my Yahoo mail, Google gmail mail or form my work email account.

  • Hi i;m using macbook pro . magic mouse pointer not moving, but do all the rest of things

    hi i;m using macbook pro . magic mouse pointer not moving, but do all the rest of things

    thank you, i have tried you suggestion but it is still just prompting me to restart rather than allowing me to install the os from the os boot disk. the problem began when the macbook was just showing me a folder icon with a question mark on it rather than starting normally. reading through forums lead me to replace the hard drive and hard drive data cable to try and resolve the issue. however, even after having done this the folder with the question mark is still appearing. i cannot get the os istall disk to boot properly. it recognises that the disk is in the drive but continually prompts me to restart and wont allow me to boot from the disk. sorry if my previouse discription wasnt accurate. does this soun familliar and can you help with this more detailed discription of the problem? thank you.

  • Ipad air 2 freezes all the time....can't open apps or type

    my ipad air is virtually unusable. it freezes all the time when i try to type. i have rebooted, both hard and soft, i have turned off predictive type. but nothing helps. also when i try to open an app i have to tap super hard in order to have it open; any app.
    called apple but they try to make me be the culprit. this has to be the worst ipad ever. and apple's support is appalling .
    any suggestions? anyone else having the same issues?

    ok, so i was on phone with apple support 2x. problem still not solved. i did two "restore to factory setting" no problem solved. i have found however the major culprit and hope that this will be addressed in future update of ios8.1: my personalized keyboard shortcut were freezing up the typing ability on keyboard. so i deleted all of them. a little better. not freezing nearly as often. however, the typing is still cumbersome as its lagging behind big time. so have to go over everything i typed or tried to type again, correcting everything.
    i dont believe its a true hardware issue i am leaning towards a coding trouble on a broader spectrum.
    anyone else experiencing this annoyance?

  • Waveburner and Soundtrack Pro :ask for a serial and XS key all the time

    Dears all,
    i have installed the Logic package on a new Mac. All seems fine but all the time i start Waveburner or Soundtrack pro i get a serial number and xs key dialog box. Can someone help me ?
    Thanks in advance.
    The system is a iMac 27 3.4 os 10.8.3.
    Best
    -Anton

    Problem solved in this way :
    Launch Waveburner -> type or copy the Logic 9 serial -> at the second dialog box ( insert xs key or type the serial ) type or paste the Logic 8 serial number.
    It work and also Sountrack is running flawless without serial ask.
    Cheers.
    -A

  • MacBook Pro crashing / freezing all the time

    Hi,
    Earlier this year (2014) I bought a new MacBook Pro from the Apple Store and have been plagued by it repeatedly crashing. If anyone can help me get to the root of the problem then that would be very much appreciated.
    The model is a MacBook Pro 13" / 2.5GHz / 4GB RAM / 500GB hard drive / OS X 10.9.5. The entry model mac, not retina.
    It's probably worth pointing out that I have not done anything with it that might explain the crashing (e.g. installed non-mac products, spilled anything on it, travelled with it, thrown into under a bus, etc).
    From the point at which I got it, it has intermittently crashed. Usually when browsing the internet, the cursor will turn into a spinning beachball that stops me from clicking on anything, the cursor then disappears and the grey circular loading diagram appears at the bottom of the screen (the one that shows on start up, just above the dock). The screen does not grey out or anything, whatever was showing on the screen before it crashed will still be showing, but the loading diagram will be overlaid. The loading circle spins for varying amounts of time but never recovers, it always eventually just permanently freezes. At which point there is nothing I can do but hold down the power button to restart the thing.
    Originally I thought it was because I had too many programmes open but it even freezes when only google chrome is open and nothing else. I followed the online troubleshooting steps but that made no difference. I spoke to apple support via chat on a number of occasions and followed their advice to the letter. This included somebody remotely viewing my desktop and getting me to 'verify the disk', which flagged no issues. We then did a back-up and erased and re-installed the operating system. Again this made no difference. Virus scans and other trouble shooting measures have not flagged anything up either.
    I have been to the 'genius' bar with it twice now (the first time was not because it froze but because it simply cut out one day and would not charge or turn on). The second time was for the freezing. We opened some tabs in chrome and simultaneously observed the memory usage in activity monitor. It looked like chrome was taking up pretty much all of the RAM and they said this may be something to do with it. The fix they recommended was to stop using chrome and only use safari which is 'optimised' for usage with macs. That was two weeks ago. I have only been using safari since then but it still crashes. Most recently it crashed with only around 5 safari tabs and no other programmes open. 
    My most recent encounter with the apple support wizards resulted in nothing more than sarcastic comments about why I was reluctant to erase and install the operating system for a third time. They said there was nothing more they could do so I'll have to wait for another appointment with the genius bar - that'll take a month or so, hence why I am on here.
    I'm getting to my wit's end with it. My old £200 Toshiba could operate with 5 times the number of tabs open and was only a fifth of the price.
    As I mentioned, any solutions - or ways of identifying what the problem actually is - would be greatly appreciated.
    Many thanks,

    Dear Linc,
    I have the same problem. Below is the result of running the script. I am grateful for any pointers.
    Many thanks
    Start time: 16:52:39 12/29/14
    Model Identifier: MacBookAir6,2
    System Version: OS X 10.10.1 (14B25)
    Kernel Version: Darwin 14.0.0
    Time since boot: 22 minutes
    Root access: No
    Diagnostic reports
       2014-12-29 Google Chrome hang
       2014-12-29 Safari hang x2
    Log
       Dec 29 16:26:29 process Dropbox109[350] caught causing excessive wakeups. Observed wakeups rate (per sec): 814; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 102198
       Dec 29 16:26:31 process com.apple.WebKit[440] caught causing excessive wakeups. Observed wakeups rate (per sec): 1745; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 66323
       Dec 29 16:26:42 process Messages[223] caught causing excessive wakeups. Observed wakeups rate (per sec): 918; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 141623
       Dec 29 16:26:46 process Microsoft Databa[298] caught causing excessive wakeups. Observed wakeups rate (per sec): 868; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 131520
       Dec 29 16:26:55 process syncdefaultsd[246] caught causing excessive wakeups. Observed wakeups rate (per sec): 536; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 89543
       Dec 29 16:27:00 process Mail[224] caught causing excessive wakeups. Observed wakeups rate (per sec): 261; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45203
       Dec 29 16:27:20 process Install in Progr[467] caught causing excessive wakeups. Observed wakeups rate (per sec): 39949; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 684910
       Dec 29 16:27:20 process Dropbox109[456] caught causing excessive wakeups. Observed wakeups rate (per sec): 41050; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 1843892
       Dec 29 16:27:20 process warmd_agent[468] caught causing excessive wakeups. Observed wakeups rate (per sec): 39848; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 683599
       Dec 29 16:30:29 jnl: b(1, 4): replay_journal: from: 20515840 to: 6814720 (joffset 0x11502000)
       Dec 29 16:30:29 jnl: b(1, 4): journal replay done.
       Dec 29 16:30:30 com.apple.xpc.launchd.domain.pid.virusbarrierd.67: Could not resolve origin of domain. XPC services in this domain's bundle will not be bootstrapped: error = 107: Malformed bundle, taint = missing executable
       Dec 29 16:30:31 com.avast.uninstall: Service setup event to handle failure and will not launch until it fires.
       Dec 29 16:30:52 com.avast.userinit: Service setup event to handle failure and will not launch until it fires.
       Dec 29 16:30:56 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.336: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
       Dec 29 16:30:56 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.336: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
       Dec 29 16:34:31 process Mail[276] caught causing excessive wakeups. Observed wakeups rate (per sec): 274; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 62820
       Dec 29 16:34:31 process Dropbox109[350] caught causing excessive wakeups. Observed wakeups rate (per sec): 764; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 167269
       Dec 29 16:34:48 process Safari[272] caught causing excessive wakeups. Observed wakeups rate (per sec): 228; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 56184
       Dec 29 16:34:54 process com.apple.WebKit[295] caught causing excessive wakeups. Observed wakeups rate (per sec): 1345; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 337154
       Dec 29 16:34:57 process syncdefaultsd[496] caught causing excessive wakeups. Observed wakeups rate (per sec): 45785; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 366777
       Dec 29 16:34:57 process nsurlstoraged[255] caught causing excessive wakeups. Observed wakeups rate (per sec): 389; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 100196
       Dec 29 16:34:57 process spindump_agent[316] caught causing excessive wakeups. Observed wakeups rate (per sec): 465; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 113844
       Dec 29 16:40:29 com.avast.update: Service setup event to handle failure and will not launch until it fires.
       Dec 29 16:50:29 com.avast.update: Interval spawn of service failed: 139: Service cannot presently execute
    kexts
    com.intego.virusbarrier.kext.realtime (928)
    net.kromtech.kext.Firewall (2.3.7)
    Agents
       com.avast.home.userinit
    com.intego.commonservices.taskmanager
    com.intego.virusbarrier.alert
       com.avast.userinit
    com.intego.netupdate.agent
    com.anchorfree.hsshelper-mac
       com.adobe.ARM.UUID
    com.apple.photostream-agent
    com.jdibackup.JustCloud.autostart
    com.jdibackup.JustCloud.notify
    com.intego.commonservices.uninstaller
    com.hp.devicemonitor
    com.oracle.java.Java-Updater
    com.intego.commonservices.integomenu
    com.huawei.HWPortCfg.plist
       com.zeobit.MacKeeper.Helper
    com.google.keystone.user.agent
       com.adobe.ARM.UUID
    com.apple.AirPortBaseStationAgent
    Startup items
    /Library/StartupItems/HWNetMgr/HWNetCfg
    /Library/StartupItems/HWNetMgr/HWNetMgr
    /Library/StartupItems/HWNetMgr/StartupParameters.plist
    /Library/StartupItems/HWPortDetect/HWPortCfg
    Bundles
    /System/Library/Extensions/hp_fax_io.kext
       -        com.hp.kext.hp-fax-io
    /System/Library/Extensions/hp_io_printerclassdriver_enabler.kext
       -        com.hp.hpio.hp-io-printerclassdriver-enabler
    /System/Library/Extensions/JMicronATA.kext
       -        com.jmicron.JMicronATA
    /System/Library/Extensions/MBBDataCardDriver.kext
       -        com.MBB.driver.MBBDataCardDriver
    /Library/Extensions/hp_io_printerclassdriver_enabler.kext
       -        com.hp.hpio.hp-io-printerclassdriver-enabler
       /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
       -        com.AdobeAAMDetectLib.AdobeAAMDetect
       /Library/Internet Plug-Ins/AdobePDFViewer.plugin
       -        com.adobe.acrobat.pdfviewer
       /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
       -        com.adobe.acrobat.pdfviewerNPAPI
       /Library/Internet Plug-Ins/Flash Player.plugin
       -        N/A
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
       -        com.oracle.java.JavaAppletPlugin
       /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
       -        com.microsoft.sharepoint.browserplugin
       /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
       -        com.microsoft.sharepoint.webkitplugin
       /Library/Internet Plug-Ins/Silverlight.plugin
       -        com.microsoft.SilverlightPlugin
    /Library/PreferencePanes/Citrix Online Plug-in.prefPane
       -        com.citrix.StandAlone
    /Library/PreferencePanes/Flash Player.prefPane
       -        com.adobe.flashplayerpreferences
    /Library/PreferencePanes/JavaControlPanel.prefPane
       -        com.oracle.java.JavaControlPanel
    /Library/ScriptingAdditions/Adobe Unit Types.osax
       -        N/A
    /Library/Spotlight/iViewCatalogImporter.mdimporter
       -        com.iview.iviewcatalogimporter
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
       -        com.skype.skypeabdialer
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
       -        com.skype.skypeabsms
    Library/Caches/com.apple.Safari/Extensions/AdBlock.safariextension
       -        com.betafish.adblockforsafari
    Library/Caches/com.apple.Safari/Extensions/Awesome Screenshot.safariextension
       -        com.diigo.safari.awesomeScreenshot
    Library/Caches/com.apple.Safari/Extensions/clea.nr Videos.safariextension
       -        com.CleanYouTube200okconsulting.safariextension
    Library/Caches/com.apple.Safari/Extensions/wrc.safariextension
       -        com.avast.wrc
       Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
       -        com.Google.GoogleEarthPlugin.plugin
    Library/PreferencePanes/Hazel.prefPane
       -        com.noodlesoft.Hazel
    App extensions
    com.wunderkinder.wunderlistdesktop.sharingextension
       com.wunderkinder.wunderlistdesktop.todayextension
    com.getdropbox.dropbox.garcon
    Apps
    /Applications/Dropbox.app
    /Applications/Google Drive.app
    Contents of /Library/LaunchAgents/HWPortCfg.plist (checksum 1745362745)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.huawei.HWPortCfg.plist</string>
                <key>OnDemand</key>
                <false/>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/StartupItems/HWPortDetect/HWPortCfg</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.avast.userinit.plist (checksum 84920623)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.avast.userinit</string>
                <key>Program</key>
                <string>/Library/Application Support/Avast/hub/userinit.sh</string>
                <key>KeepAlive</key>
                <false/>
                <key>RunAtLoad</key>
                <true/>
                <key>AbandonProcessGroup</key>
                <true/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.intego.commonservices.integomenu.plist (checksum 1276779959)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>KeepAlive</key>
                <dict>
                            <key>SuccessfulExit</key>
                            <false/>
                </dict>
                <key>Label</key>
                <string>com.intego.commonservices.integomenu</string>
                <key>LimitLoadToSessionType</key>
                <string>Aqua</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/commonservices.bundle/Contents/MacOS/IntegoMenu.app/Con tents/MacOS/IntegoMenu</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
                <key>MachServices</key>
                <dict>
                            <key>com.intego.commonservices.integomenu</key>
                            <true/>
                </dict>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.intego.commonservices.taskmanager.plist (checksum 2770223182)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>KeepAlive</key>
                <false/>
                <key>LimitLoadToSessionType</key>
                <string>Aqua</string>
                <key>WatchPaths</key>
                <array>
                            <string>/Library/Intego/TaskManager/.start</string>
                </array>
                <key>Label</key>
                <string>com.intego.commonservices.taskmanager</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/TaskManager/TM_Notifier.app/Contents/MacOS/TM_Notifier< /string>
                </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.intego.commonservices.uninstaller.plist (checksum 190387482)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>KeepAlive</key>
                <false/>
                <key>LimitLoadToSessionType</key>
                <string>Aqua</string>
                <key>WatchPaths</key>
                <array>
                            <string>/Applications/</string>
                            <string>/Applications/Intego/</string>
                </array>
                <key>Label</key>
                <string>com.intego.commonservices.uninstaller</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/Intego Uninstaller.app/Contents/MacOS/Intego Uninstaller</string>
                </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.intego.netupdate.agent.plist (checksum 1570577179)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.intego.netupdate.agent</string>
                <key>LimitLoadToSessionType</key>
                <array>
                            <string>LoginWindow</string>
                            <string>Aqua</string>
                </array>
                <key>OnDemand</key>
                <false/>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/PrivilegedHelperTools/NetUpdateAgent.app/Contents/MacOS/NetUpd ateAgent</string>
                </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.intego.virusbarrier.alert.plist (checksum 397299966)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.intego.virusbarrier.alert</string>
                <key>LimitLoadToSessionType</key>
                <string>Aqua</string>
                <key>RunAtLoad</key>
                <true/>
                <key>WatchPaths</key>
                <array>
                            <string>/Library/Intego/virusbarrier.bundle/Contents/Resources/start_alert</str ing>
                </array>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/virusbarrier.bundle/Contents/MacOS/VirusBarrier Alert.app/Contents/MacOS/VirusBarrier Alert</string>
                </array>
                <key>MachServices</key>
                <dict>
                            <key>com.intego.virusbarrier.alert</key>
                            <true/>
                </dict>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3285446522)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
                <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
                </array>
                <key>StartCalendarInterval</key>
                <dict>
                            <key>Hour</key>
                            <integer>16</integer>
                            <key>Minute</key>
                            <integer>18</integer>
                            <key>Weekday</key>
                            <integer>1</integer>
                </dict>
                <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/com.avast.init.plist (checksum 17654464)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>KeepAlive</key>
                <false/>
                <key>AbandonProcessGroup</key>
                <true/>
                <key>Label</key>
                <string>com.avast.init</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Application Support/Avast/hub/init.sh</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
                <key>StandardErrorPath</key>
                <string>/dev/null</string>
                <key>StandardOutPath</key>
                <string>/dev/null</string>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.avast.uninstall.plist (checksum 3425227779)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>KeepAlive</key>
                <dict>
                            <key>PathState</key>
                            <dict>
                                        <key>/Applications/Avast.app</key>
                                        <false/>
                            </dict>
                </dict>
                <key>AbandonProcessGroup</key>
                <true/>
                <key>Label</key>
                <string>com.avast.uninstall</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Application Support/Avast/hub/autouninstall.sh</string>
                </array>
                <key>RunAtLoad</key>
                <false/>
                <key>StandardErrorPath</key>
                <string>/dev/null</string>
                <key>StandardOutPath</key>
       ...and 3 more line(s)
    Contents of /Library/LaunchDaemons/com.avast.update.plist (checksum 3870293393)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>KeepAlive</key>
                <false/>
                <key>AbandonProcessGroup</key>
                <true/>
                <key>Label</key>
                <string>com.avast.update</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Application Support/Avast/components/update/update.sh</string>
                </array>
                <key>StartInterval</key>
                <integer>600</integer>
                <key>ThrottleInterval</key>
                <integer>10800</integer>
                <key>RunAtLoad</key>
                <false/>
                <key>StandardErrorPath</key>
                <string>/dev/null</string>
                <key>StandardOutPath</key>
                <string>/dev/null</string>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/com.intego.commonservices.daemon.integod.plist (checksum 3331282155)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.intego.commonservices.daemon.integod</string>
                <key>RunAtLoad</key>
                <true/>
                <key>KeepAlive</key>
                <true/>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/integod</string>
                </array>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.intego.commonservices.daemon.taskmanager.plist (checksum 2890455724)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.intego.commonservices.daemon.taskmanager</string>
                <key>RunAtLoad</key>
                <true/>
                <key>KeepAlive</key>
                <true/>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/TaskManager/TaskManagerDaemon</string>
                </array>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.intego.commonservices.icalserver.plist (checksum 1036205248)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>ServiceIPC</key>
                <true/>
                <key>Label</key>
                <string>com.intego.commonservices.icalserver</string>
                <key>Sockets</key>
                <dict>
                            <key>Listeners</key>
                            <dict>
                                        <key>SockNodeName</key>
                                        <string>127.0.0.1</string>
                                        <key>SockServiceName</key>
                                        <string>47807</string>
                                        <key>SockFamily</key>
                                        <string>IPv4</string>
                            </dict>
                </dict>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/IntegoiCalServer</string>
                </array>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/com.intego.commonservices.metrics.kschecker.plist (checksum 500882172)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.intego.commonservices.metrics.kschecker</string>
                <key>Program</key>
                <string>/Library/Intego/im_ks_tool</string>
                <key>RunAtLoad</key>
                <true/>
                <key>StartInterval</key>
                <integer>86400</integer>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.intego.netupdate.daemon.plist (checksum 698519948)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.intego.netupdate.daemon</string>
                <key>RunAtLoad</key>
                <true/>
                <key>KeepAlive</key>
                <true/>
                <key>OnDemand</key>
                <false/>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/netupdated.bundle/Contents/Resources/com.intego.netupda ted</string>
                </array>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.intego.virusbarrier.daemon.emlparser.plist (checksum 3875365843)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.intego.virusbarrier.daemon.emlparser</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/virusbarrier.bundle/Contents/MacOS/vbemlparser</string>
                </array>
                <key>MachServices</key>
                <dict>
                            <key>com.intego.virusbarrier.daemon.emlparser</key>
                            <true/>
                </dict>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.intego.virusbarrier.daemon.logger.plist (checksum 1390371758)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.intego.virusbarrier.daemon.logger</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/virusbarrier.bundle/Contents/MacOS/virusbarrierl</strin g>
                </array>
                <key>MachServices</key>
                <dict>
                            <key>com.intego.virusbarrier.daemon.logger</key>
                            <true/>
                </dict>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.intego.virusbarrier.daemon.plist (checksum 2263010952)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.intego.virusbarrier.daemon</string>
                <key>KeepAlive</key>
                <true/>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/virusbarrier.bundle/Contents/MacOS/virusbarrierd</strin g>
                </array>
                <key>MachServices</key>
                <dict>
                            <key>com.intego.virusbarrier.daemon</key>
                            <true/>
                            <key>com.intego.virusbarrier.daemon.checkin</key>
                            <true/>
                </dict>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.intego.virusbarrier.daemon.scanner.plist (checksum 3058859818)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.intego.virusbarrier.daemon.scanner</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Library/Intego/virusbarrier.bundle/Contents/MacOS/virusbarriers</strin g>
                </array>
                <key>MachServices</key>
                <dict>
                            <key>com.intego.virusbarrier.daemon.scanner</key>
                            <true/>
                </dict>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.mackeeper.AntiVirus.plist (checksum 2747479378)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
           <dict>
                            <key>Disabled</key>
                            <false/>
                            <key>Label</key>
                            <string>com.mackeeper.AntiVirus</string>
                            <key>Program</key>
                            <string>/Library/Application Support/MacKeeper/AntiVirus.app/Contents/MacOS/AntiVirus</string>
                            <key>OnDemand</key>
                            <false/>
                </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.torch.update.agent.plist (checksum 2884032329)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.torch.update.agent</string>
                <key>StandardOutPath</key>
                <string>/var/log/TorchUpdater.log</string>
                <key>StandardErrorPath</key>
                <string>/var/log/TorchUpdater.log</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/usr/local/libexec/TorchUpdater</string>
                            <string>--hello=torch</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
                <key>KeepAlive</key>
                <false/>
                <key>StartInterval</key>
                <integer>1800</integer>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist (checksum 3798729423)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
           <dict>
                            <key>Disabled</key>
                            <false/>
                            <key>Label</key>
                            <string>com.zeobit.MacKeeper.plugin.AntiTheft.daemon</string>
                            <key>Program</key>
                            <string>/Library/Application Support/MacKeeper/MacKeeperATd</string>
                            <key>OnDemand</key>
                            <false/>
                </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 394026997)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.adobe.ARM.UUID</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
                            <string>semi-auto</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
                <key>StartInterval</key>
                <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 4116814193)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.adobe.ARM.UUID</string>
                <key>ProgramArguments</key>
                <array>
                            <string>/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
                            <string>semi-auto</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
                <key>StartInterval</key>
                <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.avast.home.userinit.plist (checksum 1055595367)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.avast.home.userinit</string>
                <key>ProgramArguments</key>
                <array>
                            <string>~/Library/Application Support/Avast/hub/userinit.sh</string>
                </array>
                <key>KeepAlive</key>
                <false/>
                <key>RunAtLoad</key>
                <true/>
                <key>EnableGlobbing</key>
                <true/>
                <key>AbandonProcessGroup</key>
                <true/>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 2855546243)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Label</key>
                <string>com.google.keystone.user.agent</string>
                <key>LimitLoadToSessionType</key>
                <string>Aqua</string>
                <key>ProgramArguments</key>
                <array>
                  <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
                  <string>-runMode</string>
                  <string>ifneeded</string>
                </array>
                <key>RunAtLoad</key>
                <true/>
                <key>StartInterval</key>
                <integer>3523</integer>
                <key>StandardErrorPath</key>
                <string>/dev/null</string>
                <key>StandardOutPath</key>
                <string>/dev/null</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.jdibackup.JustCloud.autostart.plist (checksum 2966143524)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
    <key>Label</key>
    <string>com.jdibackup.JustCloud.autostart</string>
    <key>ProgramArguments</key>
           <array>
    <string>open</string>
    <string>/Applications/JustCloud.app/Contents/Resources/Utility.app</string>
    <string>-n</string>
    <string>--args</string>
    <string>9</string>
    <string>-l</string>
           </array>
    <key>StandardOutPath</key>
    <string>/Users/USER/Library/Logs/JustCloud/lagent_out.log</string>
    <key>StandardErrorPath</key>
    <string>/Users/USER/Library/Logs/JustCloud/lagent_err.log</string>
    <key>RunAtLoad</key>
           <true/>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.jdibackup.JustCloud.notify.plist (checksum 1673226260)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
    <key>Label</key>
    <string>com.jdibackup.JustCloud.notify</string>
    <key>ProgramArguments</key>
           <array>
    <string>open</string>
    <string>/Applications/JustCloud.app/Contents/Resources/Utility.app</string>
    <string>--args</string>
    <string>7</string>
    <string>1</string>
           </array>
    <key>StandardOutPath</key>
    <string>/Users/USER/Library/Logs/JustCloud/lagent_out.log</string>
    <key>StandardErrorPath</key>
    <string>/Users/USER/Library/Logs/JustCloud/lagent_err.log</string>
    <key>StartInterval</key>
    <integer>1200</integer>
    <key>RunAtLoad</key>
           <false/>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.zeobit.MacKeeper.Helper.plist (checksum 3328303008)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
                <key>Disabled</key>
                <false/>
                <key>EnvironmentVariables</key>
                <dict>
                            <key>ZBTimeStamp</key>
                            <string>20141124160414</string>
                </dict>
                <key>Label</key>
                <string>com.zeobit.MacKeeper.Helper</string>
                <key>LimitLoadToSessionType</key>
                <string>Aqua</string>
                <key>OnDemand</key>
                <false/>
                <key>Program</key>
                <string>/Applications/MacKeeper.app/Contents/Resources/MacKeeper Helper.app/Contents/MacOS/MacKeeper Helper</string>
       </dict>
       </plist>
    DNS: 203.113.188.1
    User login items
       iTunesHelper
       -        /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
       Dropbox
       -        /Applications/Dropbox.app
    AdobeResourceSynchronizer
       -        /Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app
       Google Drive
       -        /Applications/Google Drive.app
       HotstockedPrecision
       -        missing value
       Alfred 2
       -        /Applications/Alfred 2.app
       HazelHelper
       -        /Users/USER/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelHelper.a pp
    Safari extensions
       AdBlock
       Awesome Screenshot
       avast! Online Security
       clea.nr Videos
    Restricted files: 573
    Lockfiles: 9
    Elapsed time (s): 170

  • Macbook Pro getting slower and slower, freezing all the time

    Hi,
    My early 2011 Macbook Pro is gettin slower and slower, and I'm pretty sure Mavericks only worsened the condition. This is my report, can someone help me on why this is happening?
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    Startup Items:
              FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 1 day 1:28:0
    Disk Information:
              TOSHIBA MK5059GSXP disk0 : (500,11 GB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) /: 499,25 GB (54,63 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              JMicron USB to ATA/ATAPI bridge 500,11 GB
                        EFI (disk2s1) <not mounted>: 209,7 MB
                        Filmes (disk2s2) /Volumes/Filmes: 499,76 GB (330,53 GB free)
              Apple Computer, Inc. IR Receiver
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. iPhone
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              de.novamedia.driver.NMSmartplugSCSIDevice          (1.0.1)
              com.Cycling74.driver.Soundflower          (1.5.1)
              com.bresink.driver.BRESINKx86Monitoring          (8.0)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.oracle.java.Helper-Tool.plist
    Launch Agents:
              [failed] com.brother.LOGINserver.plist
              [loaded] com.oracle.java.Java-Updater.plist
              [loaded] de.novamedia.VodafoneDeviceObserver.plist
    User Launch Agents:
              [failed] com.akamai.single-user-client.plist
              [loaded] com.facebook.videochat.[redacted].plist
              [failed] com.google.GoogleContactSyncAgent.plist
              [loaded] com.macpaw.CleanMyMac.helperTool.plist
              [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
              [loaded] com.spotify.webhelper.plist
              [loaded] com.valvesoftware.steamclean.plist
    User Login Items:
              uHD-Agent
              GrowlHelperApp
              Alfred
              uTorrent
              Dropbox
              iShutdown
              HyperDock Helper
              Assistente de gestor de conteúdo
    3rd Party Preference Panes:
              Akamai NetSession Preferences
              Fan Control
              Flash Player
              Flip4Mac WMV
              Growl
              HyperDock
              Java
    Internet Plug-ins::
              DirectorShockwave: Version: 11.5.9r620
              o1dbrowserplugin: Version: 4.9.1.16010
              Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 2.3.8.1
              RealPlayer Plugin: Version: Unknown
              Silverlight: Version: 5.1.20913.0 - SDK 10.6
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
              Flash Player: Version: 11.9.900.170 - SDK 10.6
              QuickTime Plugin: Version: 7.7.3
              googletalkbrowserplugin: Version: 4.9.1.16010
              npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
              JavaAppletPlugin: Version: Java 7 Update 45
    Bad Fonts:
              None
    Old applications:
              Content Manager Assistant:          Version: 1.10.4086.78 - SDK 10.5
                        /Users/duarte_cunharosa/Applications/CMA.app
              Content Manager Assistant:          Version: 1.10.4086.78 - SDK 10.5
                        /Applications/CMA.app
              FacebookVideoCalling:          Version: 1.2.0.157 - SDK 10.5
                        /Users/duarte_cunharosa/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
              Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
              Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
              Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
              Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
              Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Document Connection.app
              Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                        /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
              Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Excel.app
              Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
              Microsoft Outlook:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Outlook.app
              Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
              Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                        /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
              Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
              Microsoft Word:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Word.app
              Miro Video Converter:          Version: 2.6 - SDK 10.0
                        /Applications/Miro Video Converter.app
              My Day:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/My Day.app
              Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
              Plants vs:          Version: 1.0.40 - SDK 10.5
                        /Applications/Plants vs. Zombies.app
              RipIt:          Version: 1.6.2 - SDK 10.5
                        /Applications/RipIt.app
              SLLauncher:          Version: 1.0 - SDK 10.5
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              Solver:          Version: 1.0 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
              UPlayBrowser:          Version: 1.0.1.23853 - SDK 10.5
                        /Library/Application Support/Ubisoft/Assassin's Creed Brotherhood/UPlayBrowser.app
    Time Machine:
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 464.96 GB Disk used: 414.09 GB
              Destinations:
                        Time Machine [Local] (Last used)
                        Total size: 698.32 GB
                        Total number of backups: 3
                        Oldest backup: 2013-12-20 18:10:54 +0000
                        Last backup: 2013-12-22 19:52:17 +0000
                        Size of backup disk: Too small
                                  Backup size 698.32 GB < (Disk used 414.09 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   9%          Transmission
                   4%          Dropbox
                   2%          WindowServer
                   2%          Dock
                   1%          Google Chrome
    Top Processes by Memory:
              123 MB          Google Chrome
              119 MB          iTunes
              102 MB          Dropbox
              87 MB          Google Chrome Helper
              66 MB          Finder
    Virtual Memory Statistics:
              148 MB          Free RAM
              995 MB          Active RAM
              859 MB          Inactive RAM
              1.03 GB          Wired RAM
              7.80 GB          Page-ins
              4.84 GB          Page-outs

    If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic  test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
    Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
    You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
    Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
    The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
    If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
    Step 2 
    Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
    PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    You can then quit Terminal. Please note:
    ☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
    ☞ When you type your password, you won't see what you're typing.
    ☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
    ☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
    ☞ The commands don't change anything, and merely running them will do neither good nor harm.
    ☞ Remember to post the output. It's already in the Clipboard. You don't have to copy it. Just paste into a reply    
    ☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
    ☞ Don't post the contents of the Terminal window.
    ☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply.

  • Macbook Pro freezes all the time

    Hi,
    I have a fairly new early 2011 Macbook Pro 13". It has been running perfectly fine until about last Wednesday. Now whenever I try to do anything, I get the spinning beach ball of death. It does'nt matter what program it is, I always get it. My HDD, which is the standard 500GB, only has 174GB used, so it is not an issue of being too full. My laptop fell off my desk in class on Tuesday, but was in my Speck hard shell case, which snapped, but there was not a scratch on the laptop. Now it is not really working. Could my HDD be failing for some reason?
    Thanks,
    Tyler

    Have you tried repairing the hard drive?
    Repair the Hard Drive - Lion
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    If the above doesn't help any then reinstall OS X:
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • My Macbook Pro started freezing all the time & going to sleep on its own for no reason

    I've been having trouble for a few weeks with my computer freezing way too often for seemingly no reason - I'm using it exactly the same way I always have with no problems, and even actively trying to have less applications open (which seems to have no effect). I can't always load simple webpages without it freezing and giving me the color wheel and it's just MUCH slower in general. It is seriously making it difficult to use my computer for work  or for fun...
    It has also started going to sleep on its own - the screen will just go black (or sometimes BLUE) and the keyboard lights turn off, and the only way to get it to wake back up is to close the computer, wait, open it again and click or press a key. It doesn't respond to any keys/clicks until it has been closed and reopened.
    It seems to overheat really easily lately as well - but it does not always overheat when it freezes.
    SMC reset did not seem to have an effect. Activity Monitor doesn't show anything crazy, everything is pretty much 0% except Firefox around 7-12% as I'm typing this. 246 GB available on my hard drive so that doesn't seem to be the problem either. Right after restarting my computer it seems better but the problems quickly resurface...
    I googled for help before posting this and someone had suggested running the command
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tail | open -ef
    in Terminal, which they said "Normally the command will produce no output, and the window will be empty." But mine gave this:
    Tue Apr 15 21:04:24 My-MacBook-Pro kernel[0] <Debug>: disk0s2: I/O error.
    Tue Apr 15 21:04:42 My-MacBook-Pro kernel[0] <Debug>: disk0s2: I/O error.
    Tue Apr 15 21:35:04 My-MacBook-Pro kernel[0] <Debug>: disk0s2: I/O error.
    Tue Apr 15 21:35:20 My-MacBook-Pro kernel[0] <Debug>: disk0s2: I/O error.
    Wed Apr 16 10:56:46 My-MacBook-Pro kernel[0] <Debug>: disk0s2: I/O error.
    Wed Apr 16 10:57:03 My-MacBook-Pro kernel[0] <Debug>: disk0s2: I/O error.
    Wed Apr 16 12:11:17 My-MacBook-Pro kernel[0] <Debug>: disk0s2: I/O error.
    Wed Apr 16 12:11:35 My-MacBook-Pro kernel[0] <Debug>: disk0s2: I/O error.
    Wed Apr 16 12:11:52 My-MacBook-Pro kernel[0] <Debug>: disk0s2: I/O error.
    Wed Apr 16 12:23:01 My-MacBook-Pro kernel[0] <Debug>: disk0s2: I/O error.
    I don't know what that means or if that is useful info to help solve my problem? I just want to know what I can do to make my mac go back to normal!
    I ran Etrecheck:
    Hardware Information:
        MacBook Pro (15-inch, Early 2011)
        MacBook Pro - model: MacBookPro8,2
        1 2 GHz Intel Core i7 CPU: 4 cores
        4 GB RAM
    Video Information:
        AMD Radeon HD 6490M - VRAM: 256 MB
        Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
        Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:24:42
    Disk Information:
        Hitachi HTS725050A9A362 disk0 : (465.76 GB)
            (null) (disk0s1) <not mounted>: 200 MB
            Macintosh HD (disk0s2) / [Startup]: 465.44 GB (229.26 GB free)
        MATSHITADVD-R   UJ-898 
    USB Information:
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
        Apple, Inc. MacBook Pro
    Kernel Extensions:
        com.digidesign.iokit.DigiDal    (8.0.3f1)
        com.paceap.kext.pacesupport.snowleopard    (5.7.2)
    Startup Items:
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        M-AudioFastTrack: Path: /Library/StartupItems/M-AudioFastTrack
        PACESupport: Path: /Library/StartupItems/PACESupport
    Problem System Launch Daemons:
        [System]    org.samba.winbindd.plist 3rd-Party support link
    Launch Daemons:
        [System]    com.adobe.fpsaud.plist 3rd-Party support link
        [System]    com.google.keystone.daemon.plist 3rd-Party support link
        [System]    com.microsoft.office.licensing.helper.plist 3rd-Party support link
        [System]    org.eyebeam.SelfControl.plist 3rd-Party support link
        [System]    PACESupport.plist 3rd-Party support link
    Launch Agents:
        [System]    com.google.keystone.agent.plist 3rd-Party support link
        [System]    com.hp.help.tocgenerator.plist 3rd-Party support link
        [System]    com.m-audio.mobilepremkii.helper.plist 3rd-Party support link
    User Launch Agents:
        [not loaded]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [not loaded]    com.facebook.videochat.[redacted].plist 3rd-Party support link
        [not loaded]    com.spotify.webhelper.plist 3rd-Party support link
    User Login Items:
        Flux
        iTunesHelper
        RescueTime
    Internet Plug-ins:
        o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
        nplastpass: Version: 2.5.5 3rd-Party support link
        Unity Web Player: Version: UnityPlayer version 3.5.2f2 - SDK 10.6 3rd-Party support link
        RealPlayer Plugin: Version: Unknown
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
        FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 3rd-Party support link
        QuickTime Plugin: Version: 7.6.6
        Flash Player: Version: 13.0.0.201 - SDK 10.6 3rd-Party support link
        googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
        SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 3rd-Party support link
        AdobePDFViewer: Version: 10.1.1 3rd-Party support link
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
        JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Outdated! Update
    iTunes Plug-ins:
        Quartz Composer Visualizer: Version: 1.2
    3rd Party Preference Panes:
        Flash Player  3rd-Party support link
        Growl  3rd-Party support link
        M-AudioFastTrack  3rd-Party support link
        M-Audio MobilePre  3rd-Party support link
    Old Applications:
        None
    Time Machine:
        Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU:
             5%    firefox
             3%    EtreCheck
             2%    WindowServer
             2%    hidd
             1%    mds
    Top Processes by Memory:
        545 MB    firefox
        74 MB    mds
        57 MB    WindowServer
        41 MB    Mail
        41 MB    Finder
    Virtual Memory Information:
        1.88 GB    Free RAM
        818 MB    Active RAM
        458 MB    Inactive RAM
        880 MB    Wired RAM
        190 MB    Page-ins
        0 B    Page-outs

    Eric - I dont understand how I'd use caffeinate.  I am not running any code or particular script.  My system goes to sleep if surfing the web, or running Word or Excel, etc. 
    Or..  Are you saying I should go through and type 'caffeinate X' for all of my applications?

Maybe you are looking for