My macbook was working yesterday and today it wont turn on and i put my charger in but its not working on my computer. but it works on my sisters. What does it mean? Is it broken?
my macbook was working yesterday and today it wont turn on. I put my charger in but its not working on my computer. but it works on my sisters. What does it mean? Is it broken?
Hi SarahHannah,
If you are having trouble activating iMessage, this article contains relevant troubleshooting steps:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Take care,
- Ari
Similar Messages
-
I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported. What does this mean, and how do I get back all my photos and fix this? thanks.
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know some details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
where is you library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
Trying to send "Message" on iPad 2 and keep getting message that "x" is "not registered with iMessage." Never happened on previous iPad. What does it mean and how do I solve?
Trying to send "Message" on iPad 2 and keep getting message that "x" is "not registered with iMessage." Never happened on previous iPad. What does it mean and how do I solve?
-
My normally reliable Time Machine is giving following error message;-
The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use.
What does it mean and how do I deal with it?I have loaded it into ML using a great and free utility unpkg.. it probably works much the same as Pacifist.
Locate your downloaded 5.6 dmg file.. click it so you can see the pkg but don't bother opening it.
Download, install and run unpkg.
http://www.timdoug.com/unpkg/
Drag the airport utility 5.6 pkg over to unpkg.. and it will create a new directory on the desktop.. named AirPortUtility56.. drill down to Applications, Utilities and you will find the unpackaged utiity.. drag it to your main utilities directory or just run it where you are.. -
My phone 5 died and now it wont turn back on or seem to charge at all. I've tried several different charger cords and outlets. And all the phone will do is show the empty battery symbol. please help! Any suggestions are apprecaited!?! thanks
Hello Cooper,
Thank you for the details of the issue you are experiencing with your iPhone 5. I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am trying to set up my email on my ipday, but I keep getting yahoo server is unavailable, please try again later. What does this mean?
I just discover
ed that all you need to do is change you yahoo password from your computer and then set it up on your iphone. That's it -
the procedure entry point Sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. what does this mean?????
Hi Vas, I'll do my best.
I don't think the current error message you're getting is related to the previous one.
I have researched a little bit on the error message you're getting, and it seems to be one that has been going on for a few years, and from what I can see it relates to the iPod Photo cache folder.
It also appears that the actual phone does sync even though you still get this message.
I suggest you have a look at these webpages for further information
https://discussions.apple.com/thread/2441003?start=0&tstart=0
http://support.apple.com/kb/TS1314
Good luck and let me know how you get on -
i restored my iphone 5c and it shut off and now it wont turn back on i tried to restore it nothing its fully charged and i tried to hold the home button and lock button it shows the logo and shuts off again
1st, try to do a hard reset if that does not work try this article
http://support.apple.com/kb/ts3281 -
My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I rented Sherlock Holmes: A Game of Shadows and when I tried to watch it, the movie would not play. I received the error message (-42408). What does this mean and what should I do?
Is all other content purchased using the same iTunes Store account also failing to play with that error message?
-
hi all,
i kinda have some trouble here with my itunes acc.
i just moved from usa to indonesia,
my question is,
i try many time to change the country of region,
but the itunes said that i have an active itunes match..
what does it mean?
how can it turn it off?
thank you so muchClick here and request assistance.
(66007) -
Please help, Ive tried resetting my ipod and plugging it in to itunes and nothing is responding. The scrren is white then it turns to blue and all these diffrent patterns. I dont know what else to do???
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Adding new vault a message saying "New vault could not be added. Ensure that destination path has appropriate permissions and that vault has a unique name.
What do I do?Check to make sure you have write permissions on the folder you are trying to make the vault in and that there are no other vaults in that folder using the name you are trying to use to make this new vault.
-
In an earlier version (Firefox v.31) on this, and (presently) on two other PC's, I was/am able to run add-on FT DeepDark 11.3.1 without any problems. It was only recently - after updating to v.32.0.3 on this PC that this situation started. The PC in question is a Dell Dimension 8400 Intel P4 running Windows 7, though I'm thinking it may have something to do with the newer version of Firefox. Could anyone help me with this? I like this add-on because it is easier in my eyes when browsing the internet. Thanks
PS: Attempted to install the troubleshooter, and again I received a similar error: "Troubleshooter could not be installed because Firefox cannot modify the needed file."This error has been reported before in this bug:
https://bugzilla.mozilla.org/show_bug.cgi?id=730040#c21
Please read that bug I linked you to and let me know if the last comment in the bug solves your problem. Apparently the problem is about the addon .xpi file being read-only. Try right-clicking it, going to Properties and unchecking the "Read-only" attribute box at the bottom of the dialog. Click Apply, then OK. -
I think I uninstalled the soft wear thats runs the phone.. is there some where i can download it and put it on the phone????
Sounds like a hardware issue. Make an appointment at an Apple store. There is no software fix for a hardware failure.
Maybe you are looking for
-
Error message on Illustrator when trying to open a file - please help!
Cant open the illustration. There is not enough room for the window. Increase document area and try again. Please help me open my files......
-
PDF to Excel- internal data errors
We have Acrobat XI and we converted a PDF document to Excel. It looked like it worked properly. However, we discovered when trying to sort the date field, that some of the dates became corrupted in Excel . It affected the stored values of the dates
-
DESELECT FUNCTION IS NOT WORKING IN MIRO TCODE
Hi All, I am creating a BDC for MIRO t-code, When recording I have selected DESELECT function( technical function text is ADMA) to deselect all the items. The Deselect function is working well when i do recording, But same is not
-
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin Source: Microsoft-Windows-Hyper-V-VMMS Date: 16.9.13 13:03:39 Event ID: 15350 Level: Error Description: The virtualization infrastructure driver (VID) is not running.
-
CRM Interfaces with R/3 programming
Hello Experts, I am new to CRM programming in ABAP. Can anyone send me some example programs for interfaces, BADIs and BDOCs in CRM which can be used as a reference for integrating CRM with R/3 interface developments. Thanks Ricky