My microsoft keeps telling me to rebuild but when I do it doesn't complete it. It says it might have to be with my back up. any help?

Any time I open up microsoft word, powerpoint, or excel it is telling me to rebuild so I follow the steps. It goes through all the steps but once it gets to the end it won't complete... I don't know how to fix this. It is saying it could be something to do with my back up that I am using. help??

This is exactly what it says when I open any office program
"Your Office database index is missing and needs to be rebuilt. This is usually caused by restoring an identity with Time Machine."

Similar Messages

My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

I'm trying to sync my new iPhone with I tunes on my Mac and it keeps telling me my iPhone or device is timed out???..Tried my old iPhone and it synched fine ??? Any help would be appreciated.

I'm trying to sync my new 5s with Itunes on my Mac and it keeps telling me that my device is timed out??? No clue what that means ...Hooked up my old Iphone 4 and it still syncs....Any help would be much appreciated..
Thanks!

Is your Mac running the current iTunes version?
If so, any change after restarting your Mac?

TS1717 I can get on my itunes but when I go to update it has an error saying that I can not connect to update server. Any suggestions

I can get on my itunes but when i go to check for updates it has an error saying that I can not connect to update servor. I checked my firewall and Itunes is checked for exceptions, any ideas

See if this helps:
Trouble installing iTunes or QuickTime for Windows

I cant connect my i phone 4 to itunes, it keeps telling me to uninstall and re install 64bit version which i do, then it says iphone doesnt have privillages or something like? any ideas?

hi!
any ideas as to why my Iphone will not connect to my I tunes account?
it says to re-install 64bit version which i do and then it says your phone
has no access privalages or something like that, any ideas?
regards Karl

Found this thread by searching the forum. I hope it helps.
https://discussions.apple.com/thread/5471311

In my current iMovie project clips now cannot be dragged from an event to the project. They play fine in the event but when dragged to the project they go blank. - even clips I have already used with no problems!

Clips go blank when I drag them from an event to the project itself. The clips are still intact in the event.
I have tested creating a new project and different clips but the error recurs - now I can't add anyclips at all to any projects,
Has anyone got a solution to this problem please?

Trashing iMovie's preference file may fix this problem.
Go to your Home folder <your user name>/Library/Preferences (not the Library folder at the top level in Macintosh HD). Similar to Lion, on Mountain Lion (10.8.3), the Home Library folder will be hidden (unlike pre-Lion OS X versions). To access it, click and hold down Go in the Finder menu bar, then press and hold down the Option key - the Library folder will appear in the drop down list. Slide the pointer down to highlight the Library. As you release the mouse button the Library folder will open.
In the Library/Preferences folder, locate a file named "com.apple.iMovieApp.plist". With iMovie closed, drag this file to the Desktop. When next opened, iMovie will create a fresh preference file with the default settings (you can change these settings in the menu item "IMovie>Preferences" if desired). Also, it's now safe to drag the old preference file to the Trash. Trashing the file will not harm your existing Events or Projects.
Note that these instructions apply to iMovie '11, which you are using. For those on iMovie '09 the preference file is named "com.apple.iMovie8.plist". Earlier versions have a similar name.
John

HT1688 My iphone 4 has face time capability but it does not have the face time app in settings for me to enable it. I have restored it with no luck. Any help?

My iphone 4 has face time capability but does not have the face time app in settings to turn it on. I have done a restore and it didn't do anything. Can anyone help?

There is no FaceTime app. To initiate FaceTime go the contact page of the person you want to FaceTime in your Contacts app and select FaceTime at the bottom of the screen.

Not able to install onedrive for business, keeps telling its already installed but its not (W7)

not able to install onedrive for business, keeps telling its already installed but its not (W7)
after a change of the 365 office version OneDrive for business it is not possible to reinstall the software
it keeps telling me it is already installed.
I think some settings are still there from the old install.
how can I remove them or force the reinstall

yeah finally
Problem solved! , my tube is back to normal ( to rock )
all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
Regards,
evil_night13

My itunes keeps telling me to contact support when i try to connect a visa card and will not let me buy music. any ideas why?

my itunes keeps telling me to contact support when i try to connect a visa card and will not let me buy music. any ideas why?

No one here can say specifically why. But you need to do what it says, contact iTunes Support. Click the Suppor tab above then the link under the Contact Us area and you'll be take to a page where you'll be guided appropriately.
Regards.

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

Well... what IS the error message?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

When Safari launches it keeps telling me I can't get a Community Toolbar. I don't care. I just want this message to go away. Any thoughts?

When Safari launches it keeps telling me I can't get a Community Toolbar. I don't care. I just want this message to go away. Any thoughts?

See:
Safari COMMUNITY TOOLBAR?!!!: Apple Support Communities
safari community toolbar: Apple Support Communities
and about a hundred other discussions of the same subject.

My iPhone 5 keeps turning off saying the battery is dead but then when it's connected to the charger it's says the battery could be anywhere between 40-60%. Any solutions

My iPhone 5 keeps turning off saying the battery is dead but then when it's connected to the charger it's says the battery could be anywhere between 40-60%. Any solutions

This is often due to fautly battery. Make Genius reservation and take iPhone to Apple Store for free quick battery diagnostic testing.

Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?

Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?
To be specific. I have the imac late 2013 model, and i just bought the trackpad this October 2014. I have been using magic mouse without any problem. I just want to have a new experience with the trackpad. Any time i on my imac, i will have a normal screen with my picture and a guest column at the center. I need to click either my picture or the guest in order to have the space where i can key in my password with the keyboard. But unfortunately, my trackpad will show that it is connected and the cursor will be moving in front of the screen if i touch the trackpad, but if i try to click, i will get no response. I have to put back batteries inside my magic mouse and then click on my picture if i want to log in with my id or i click on the guest image if i want to log in as a guest. it is only after this that my trackpad will start responding.
i want to use only trackpad for now so as to be more efficient with it. I don't want to be putting back batteries inside the magic mouse only to on my imac. I need a solution please.
Thanks.

It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
Tom

Ever since I upgraded to IOS 7 on my iPad, it does not remember my passwords, even though I check "keep me signed on". Is there a setting somewhere that I am missing? I did not have this issue with the previous OS. Thank you.

Ever since I upgraded to IOS 7 on my iPad2, it does not remember my passwords, even though I check "keep me signed on". Is there a setting somewhere that I am missing? I did not have this issue with the previous OS. Thank you.

Thank you, James, but I do have a WiFi connection on the iPad mini. The Numbers files update on my iPad third generation and iPhone just fine when connected to the same network.
Do you have any other suggestions?
Thank you!

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

My microsoft keeps telling me to rebuild but when I do it doesn't complete it. It says it might have to be with my back up. any help?

Similar Messages

Maybe you are looking for