My monitor is vga computer is nci, with an nci-vga connector attached(c00035) and then a vga-vga ca

vga-vga cable between. Monitor signals "No signal" and "Check your connection"
I have pretty much ruled out cable or monitor error because I have tried different connections with 2 cables and 2 monitors. Both of these were connected to my A1223 (Which the 2133w is to replace) and they all worked perfectly.
This computer is to replace my A1223w. (Which I maxxed out.)
What is my problem or where have I goofed? Remember, I have no monitor output so I can not interact with my unit.
Thanks for whatever help you may have to offer.
PercyP

Is this your pc?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03183981&cc=us&dlc=en&lc=en&product=5192567
Then you have a dvi-d output at the pc.
Dvi-d is digital, your vga monitor is analog.
You can't use a simple connector fron digital to analog, you would need a converter.
Other adapters work from vga2dvi-a (=analog) or vga2dvi-i (analog+digital). A vga2dvi-d can't work ....
You'll need a monitor with dvi input which understand digital signals or a graphics card which offers analog signals too.
V.
*** Say 'Thanks' with Kudos ***

Similar Messages

I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands

I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .

You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them.

I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into m

I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN! And then to further add insult to injury, I'm prompted to enter in the license number of my product. I've gone through this process a dozen times now...SCREAM!!!

Paulou12 what type of a Creative Cloud Membership do you have? You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Finally if you are in a managed environment then please work with your I.T. department to apply the update.

I am encountering crashes with Photoshop Elements 12. If I uninstall and then reinstall the software, will I jeopardize the 100s of photo images I have already moved into the Organizer? Any cautions for me

I am encountering crashes with Photoshop Elements 12. If I uninstall and then reinstall the software, will I jeopardize the 100s of photo images I have already moved into the Organizer? Any cautions for me?

If the app is designed correctly, the no, you won't. However, you'd have to ask the people who wrote the software, Adobe.

My macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?, my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?

my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?, my macbook is running very slowly with the internet. It starts off ok and then slows down - any suggestions?

How much free disk space do you have and how much memory do you have, running which operating system? Need that information to have any basis to make recommendations.

Importing photos from Iphone to computer and there is a message it is having trouble with this part way through on a phot and then stops

I am having trouble importing photos onto my Mac book Pro from my Iphone...in the middle of the import I get a message stating that they are having trouble with one of my photos and then stops importing...want to save photos and clear the phone storage

Hello cindysc
Try importing the photos using Image Capture and see if that changes things. If it still gets stuck, try and email the photo to your self and download it that way.
iOS: Unable to import photos to computer
http://support.apple.com/kb/ts3195
Regards,
-Norm G.

The back up is on my work computer. Can I set it up as a new iphone and then later upload the info from itunes

Hi,
My phone got stolen and I just got my replacement iphone 4 today. I don't have the itunes back up on my computer, but I do have it backed up at work. I want to start using th phone- can i set it up as a new phone and then update it in a few days when I get to work.
Thanks

Yes, but the first time you sync with a new iTunes library it will delete any iTunes media an apps from your phone and replace them with the media in the iTunes library your are syncing with (purchased apps and music can be redownloaded for free: http://support.apple.com/kb/HT2519).
When you get to work, connect your phone to your computer, then right-click on the name of your phone when it appears in iTunes on the left sidebar and choose Restore From Backup.

My G5 is starting up with an icon of a file folder with the smile face. Motor runs loudly and then nothing. What is going on?, my G5 is starting up with an icon of a file folder with the smile face. Motor runs loudly and then nothing. What is going on?

My G5 is starting up with an icon of a file folder with a blue smile face. The motor will run loudly for a few minutes and then nothing. I can not get it to run at all.
Any suggestions?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't work, Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

I have Elements 12 on my pc. I installed elements 13 but it will not boot up. Both products are registered with Adobe.When I sign in to 13 and then accept the software agreement it does not load. Do I need to uninstall Elements 12?

Pertaining to my question above.....I have uninstalled Elements 13 and then re-installed but I have the same problem as stated above. Any ideas on how to solve my problem? Elements 12 boots up just fine.

cactisken
You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
Can you still use 12/12.1 on this same computer that will not let you use 13?
What specific Window operating system are you using?
Let us go through the usual drill...
1. Does the problem exist with and without the antivirus and firewall(s) disabled?
2. Are you using a pen and tablet device instead of a mouse?
3. Did you install the program with antivirus and firewall(s) disabled?
4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
from SLCache to SLCacheOLD.
5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
computer as Premiere Elements 13?
Let us start here and then decide what next.
Thank you.
ATR

HT4623 hi, i tried updating my iphone IOS with latest update. I download latest update and then went tried to install. It shut down phone & asked me to connect to itunes. i didnt backup, will i lose my data.. havent connected to itune, waiting for suggest

Hi, i tried updating my iPhone IOS with latest sw update. I download latest update and then tried to install it. This immediately shut down my iPhone & the icon on screen showed iTune logo & data cable. I havent connected to iTunes yet as i want to know how to backup my data on phone before i complete the update process on iTunes. waiting for suggestions. Thanks

If you are now seeing a screen with the USB cable and an iTunes logo, you'll need to connect your iPhone to a computer with iTunes installed, provided the data on your iPhone hasn't already been lost it should back-up once it's connected in iTunes.
Regards,
Steve

Need assistance creating applications with superseedence to uninstall Office 2010, Lync 2010 and then install Office 365 click to run 2013

We are getting ready in a few months to uninstall our locally installed Office 2010 and head to the cloud with Office 365 2013. I have created applications to uninstall Office 2010 and Lync 2010 and then added them to the supersedence tab for Office 365
office 2013 click to run with appv5.
When deploying the office 365 2013 application it does not uninstall office 2010 or lync 2010 with the supersedence. I am able to manually uninstall Office 2010 and Lync 2010 with the command lines I am using in the applications.
The application uninstall for Office 2010 is:
The application uninstall is an exe so I created an application, created a deployment type with the location of our Office 2010 admin point, installation program and uninstall program are set with the same line as I have tried to deploy it separately and
also as a supersedence in the Office 365 application setup.exe /uninstall ProPlus /config "\\sccmserver\share\Office2010\ProPlus.ww\silentuninstallconfig.xml. The silentuninstallconfig.xml was created from the original config.xml file and edited
to these settings:<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="NO" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="Reboot" Value="Never" />
<Setting Id="SETUP_REBOOT" Value="NEVER" />
<OptionState Id="ProductFiles" State="Local" Children="force" />
</Configuration>
The detection method is the folder path to see that office 14 exists. When I deploy this the machines finish with success showing this exists, but does not uninstall Office 2010.
running the command line manually mapped to this location on a machine uninstalls office 2010 without issue.
Lync 2010 uninstall:
Lync is an exe so I am using the LyncSetup.exe /silent /uninstall. The application is in the supersedence tab for Office 365 2013. This never installs. If I create a softare distribution and deploy it on its own it uninstalls without issue.
We are going to use Lync 2013 with our office 365 2013 installation so we need to uninstall this. The detection method for lync is file system folder and the Microsoft lync folder for detection.
MS Office 15 (Office 365) was created with the click to run tool. I can install this with the application I created using the appv5 package created with the click to run tool. The issue is we need Office 2010 and Lync 2010 uninstalled first.
Having both versions of Office installed in test has caused issues where Office 15 365 will not list in add and remove programs and cannot be uninstalled even with the fix it article to remove office 2013.
I have looked at many articles and so far it is not working for us. Any help appreciated to get us to the cloud.
Thanks,
Brit

The applications I have for uninstall of office 2010 and Lync 2010 for some reason do not uninstall. Manually testing the command lines they do. The detection method seems to be hanging things up. On the lync uninstall detection method I have
the setting type of file system, type folder, path c:\program files\ folder name Microsoft Lync.
I highly recommend using something other than a file/folder "exists" detection method. Installers are constantly leaving things behind due to environmental inconsistencies. It may leave files/folders behind with a schedule to delete files on next reboot.
These things are unpredictable and very hard to use. I just use the "HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall" Registry location. There you can actually key off the "Product Version" DWORD as well which gives you an even more accurate method
to determine if the application you are trying to deploy (or expect to exist) is truly there. This, of course, being if you are not using an MSI. If you have MSI technology ALWAYS use the product code unless the person writing the MSI chooses to use the same
product code for every version release of their product. In which case, Use the registry method.
As far as getting the supersedence and everything working. You need to start from the basics. Create Applications for all of the apps you want to remove. Make sure they install and uninstall properly (seems like overkill but it isn't that hard). Once you
have working install/uninstall applications then you can easily apply supersedence to your new applications with a setting of Uninstall on the superseded apps you should have no problem getting rid of them. I have done this for numerous things.
For example, I did this with Cisco Jabber to replace older versions of jabber, older versions of cisco unified personal communicator and lync and OSC. All of these replaced versions had to have an Application but once it was in it took two seconds to apply
all the supersedence rules and now I know when I push that software out no matter version is running on any machine it will pull all the old apps off and put the new one on.
Dustin Estes - MCP | www.dustinestes.com

With Mozilla Firefox, I cannot go to "File" and then "Send Link" so as to pull up an email ready to send via Outlook Express, as I can with Internet Explorer - how do I change the settings to permit this?

If I am using Explorer, I can go to "File" and then "Send Link" -
an email will automaticallt pop up, with the website url pasted in;
I merely put in the recipents email address, hit Send, and away it goes
With Firefox, the email does not pop up; I have to manually pull up an email ("create mail"), then copy and paste the website url
displayed by Firefox
I want to override this default to Explorer

Hi,
Please try this: '''Tools''' (or '''Alt''' + '''T''') > '''Options''' > '''Applications'''. Look for or start typing '''mailto''' in the search box and for the '''Action''' change it to the desired mail client (the application that opens up in Explorer) if the value is different.
'''Options''' > '''Applications''': https://support.mozilla.com/en-US/kb/Options%20window%20-%20Applications%20panel
Managing Actions: https://support.mozilla.com/en-US/kb/Managing%20file%20types

I have had my Ipad for approx 4 years. When working with an app, the screen will go black and then back to the home page.

I have had a IPad for 4 years, for several months when working with apps, the screen will go black and then return to the home page

Hi sjeure,
Thanks for using Apple Support Communities. I would recommend restarting and resetting your device to see if the unexpected app closing still happens:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari

Can anyone help me with a proplem,my computer recently crashed with all my itunes libary attached to it. i purchased icloud storage and got back the purchased muisic that i had paid for,but the rest of my cd storage remains missing,is there any way of dow

please can anyone help with a problem thats just happened to me. My computer has crashed after a power surge and now i can not get to my itunes libary,i downloaded the icloud and it appears that all the purchased music i aqquired as come back but all the cds i have burned have not.Is their anyway i can download my ipod touch itune libary on to another or new computerthanks

I can help you for the future. Regularly back up your computer to an external hard drive (or cloud alternative). If you have your library backed up, it could be reinstalled on your new computer. In your current situation, you will have to reload all of your CDs as syncing of non-iTunes purchased music is only one way (Computer to iPod)

Home sharing comes up on computer, i click the library i want to see says downloading and then nothing

Home sharing comes up on computer, i see the library i want to access,says downloading then nothing happens

Hi Gary0129,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Cheers,
- Judy

My monitor is vga computer is nci, with an nci-vga connector attached(c​00035) and then a vga-vga ca

Similar Messages

Maybe you are looking for

My monitor is vga computer is nci, with an nci-vga connector attached(c00035) and then a vga-vga ca