My new macbook air sometimes has trouble starting up. It gets stuck at various stages. I have reinstalled Lion twice. That solves the problem for a few days and then in reoccurs. Any ideas? Thanks, Marty

My new macbook air sometimes has difficulty booting up. I reinstalled Lion twice. That soves the problem temporarily and then after a few days it reoccurs. It also has trouble at times opening mail or Microsoft Word. Any ideas? Thanks, Marty

Marty,
Can you elaborate on what you mean by "difficulty" during the boot sequence? When/where is the difficulty occurring? Are you getting to the Apple logo? Apple logo with spinning gear? Blue screen? Login window? There's many phases to the boot sequence and when it fails can go a long way in determing what's causing the problem.
Also, what sort of third party software is installed? It sounds like at a minimum you've installed Microsoft Office? Anything else?
Lastly, after you reinstall Lion do you perform a restore from backup or remigrate your data/content right back into the new OS? If so that could potentially be the problem right there. But truthfully there's more information that needs to be provided to begin recommending troubleshooting steps.

Similar Messages

  • My ipad is on an infinite loop.  I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started.  I have tried pressing the power and home button at the same time, but it doesn't work. Please help!

    my ipad is on an infinite loop.  I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started.  I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
    I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
    I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.

    You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • I have an iPhone 4S and a 2012 Honda CRV . The streaming BT music is fine but now suddenly it stopped displaying song info on the screen. It worked for about 10 days and then stopped. Any thoughts?

    I have an iPhone 4S and a 2012 Honda CRV . The streaming BT music is fine but now suddenly it stopped displaying song info on the screen. It worked for about 10 days and then stopped. Any thoughts?

    I think that we all know the answer to this one.
    Unfortunatley the device is concidered damaged by water. Apple can do an out of warranty repair which would cost $199. Generally they would just replace the device in this case for the $199.
    The alternative is to Purchase a new device.

  • HT1551 My apple tv (1st gen.) after showing the menu for few seconds shows the apple for a few seconds and then the menu is back, I can't do any operations on the menu

    My apple tv (1st gen) alternatly shows the apple for 30 sec. and then the menu for few seconds and the apple again, like it was restarting.  I can't do any operations

    Welcome to the user to User Technical Support Forum provided by Apple.
    Please do not post your Apple ID on a Public Forum. I have requested the Hosts remove your Personal Information.
    Thana Chootabtim wrote:
    'Your Purchase Could Not Be Completed'
    For assistance, contact iTunes Support....
    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • TS3276 can anyone help on the following please. When I have been away from the office for a few days and check for emails it only supplies the most recent 100 emails and the ones before that are never received. thanks

    can anyone help on the following please. When I have been away from the office for a few days and check for emails it only supplies the most recent 100 emails and the ones before that are never received. thanks

    Does your server have a limit?

  • When I try to update my macbook air to the new OS X Maverick it say unknown error and to please try again later. This has been going on for a few days and was hoping someone can help. Thanks.

    When I try to update my macbook air to the new OS X Maverick it say unknown error and to please try again later. This has been going on for a few days and was hoping someone can help. Thanks.

    After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
    b0n0b0
    Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
    Mar 15, 2014 9:05 AM (in response to Terence Devlin)
    Got it! Thanx.  What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

  • I can no longer access the itunes store and don't know why.the browser bar at the top loads half way and then stops. Any ideas?I am on windows 7.Thanks.

    browser bar at the top loads half way and then stops. Any ideas?I am on windows 7.Thanks.

    it seems to work when you reset the port
    try this only after you've made sure that any antiviral/firewall software isnt blocking iTunes and the internet connection settings are fine
    1. go to windows, accessories and right click on command prompt and run as administrator
    2. type in netsh winsock reset (i know sounds ridiculous but it works type WITH SPACES) and press enter
    3. Message saying "winsock reset successful now reboot your computer"
    4. restart your computer, and open iTunes..backup should run much smoother and faster
    5.Click on iTunes store might be working now

  • Hi ERROR U41M1C212 for Update Elements 9 and PS CS5. Any Idea what it is? Thanks for Help.

    hi ERROR U41M1C212 for Update Elements 9 and PS CS5. Any Idea what it is? Thanks for Help.

    If you look at the bottom/right of this screen you have a list of links in 'More information like this'.
    Have a look at them.

  • TS1398 My iphone 4S has been updated to the newest software and isn't detecting internet, although sometimes it connects for a few seconds and then disappears again. I have tried everything it has said on the internet about this and it still isn't working

    My iphone 4S has been updated to the newest software and isn't detecting internet, although sometimes it connects for a few seconds and then disappears again. I have tried everything it has said on the internet about this and it still isn't working.

    Ok I think it's a problem with my router. I went to my cousin's house and the Wi-Fi worked there perfectly. I was even able to download many apps. So I guess my router probably can't take in more connections. Oh well thanks anyway.

  • Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon

    Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon

    Perhaps this discussion will help with your issue,
    https://discussions.apple.com/message/16502324#16502324

  • I have upgraded to an Iphone 6 and am at IOS 8.2.  My calendar alerts no longer show up as notifications on my phone.  I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?

    I have upgraded to an Iphone 6 and am at IOS 8.2.  My calendar alerts no longer show up as notifications on my phone.  I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?

    I have iPhone 4s but the same problem with calendar on 8.2 iOS - no sound, no notification appears - but everything is switched on.

  • The app fails to download on my ipad- progress bar gets to halfway and then restarts. Any ideas?

    The app fails to download on my ipad- progress bar gets to halfway and then restarts. Any ideas?

    HELLO, Hello, hello..........is there anybody out there................

  • When I turn on or restart my Macbook Pro Retina 15", my entire screen flashes completely bright yellow for a few seconds and then it goes to the normal Welcome screen.  How do I fix this??

    Hi Everyone,
    This problem just started today.  When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user).  This suddenly started today and has not stopped since.  This keeps happening every single time I turn on or restart my computer.
    Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday.  When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates.  Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again.  So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process). 
    Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
    -Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
    -OS X Update (Version 10.9.3) installed May 15, 2014
    -iTunes (Version 11.2) installed May 15, 2014
    -OS X Update (Version 10.9.3) installed May 15, 2014
    -iTunes (Version 11.2) installed May 15, 2014
    -Security Update 2014-002 (Version 1.0) installed April 22, 2014
    I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each?  Or is this new problem totally unrelated?  It's just that this problem started a day after these 2 updates were installed twice.
    My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now.  The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
    If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful! 
    Thank you so much for reading this and for any help you can provide. 
    hope everyone is well,
    Elaine

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • After sleeping my macbook pro 15.4" mid 2012 model for overnight and pass 24 hours time, on wake -- the dock background is white for a few seconds and then it turns back to normal color. . .

    After sleeping MacBook Pro 15.4" mid 2012 model (running Mac OS X 10.10.2 Yosemite) for overnight and pass 24 hours time, upon wake from sleep-- the dock background is white for a few seconds and then it turns back to the normal color.
    Is this normal? Should I be worried? Is my GPU defective?
    My specs:
    MacBook Pro 15.4" Mid 2012 model, Ivy Bridge Quad core i7 2.3Ghz CPU w/ hyperthreading,
    16GB RAM, Nvidia 650M 512MB VRAM/Intel 4000 HD 1GB VRAM, 500GB HD
    Running Mac OSX 10.10.2 Yosemite.
    Thanks to all in advanced.

    It doesn't happen all the time but sometimes and i tried zapping the PRAM and it still happens!

  • When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    Hi
    And without info - it's near to impossibly to help. Try my general troubleshooting note:
    Troubleshooting note
    When iMovie doesn't work as intended this can be due to a lot of reasons
    iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    Creating a new User-Account and log into this
    This forces iMovie to create all pref. and cache files new and error free
    Event or Project got corrupted - try to make a copy and repair
    a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
    version miss match of QuickTime Player / iMovie / iDVD
    preferences are wrong - Repair Preferences
    other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    USB-flash-memories - usually do not work
    Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
    iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
    This You do by
    First -  close iPhoto
    Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
    Thirdly - now select all five options presented
    THEN - WAIT a long long time (>20 hours are not strange)
    free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    Screen must be set to million-colors
    Third-party plug-ins doesn't work OK
    Run "Cache Out X", clear out all caches and restarts the Mac
    Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

Maybe you are looking for

  • Welcome and Rules of Engagement

    Welcome to the <i>Business Process Modeling Methodologies</i> forum! Please see our <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki">Wiki FAQ</a> and use the search before you post. More detailed <a href="htt

  • Photoshop and Iphoto

    Can someone tell me why when im using photoshop file>open I can not open a photo in IPhoto I used to be able to do this now I can not. using photoshop ver 8 Iphoto 09 <Edited by Host>

  • ALEREMOTE locks

    Hello BW Experts, I have an upload problem that ALEREMOTE Locks occurs while loading data in BW. Any suggestion what to do in such case ? Regards , Amol.

  • Certification exams for the coming Teched, which is held at Bangalore

    Hi All, Do we have certification exams for the coming <b>Teched</b>, which is held at november in Bangalore.                                 If yes, please let me know the process for enrolling the certification exam and what are the modules SAP is o

  • CLASSPATH & servlet.jar

    Hi Folks, I'm currently working through the Core Servlets and JavaServer Pages books. I've been trying to set up the development environment, but am having some difficulty. I'm using Tomcat 4.0 and am using the guide on the www.coreservlets.com site.