My Orders does not list my Photoshop CS5 purchase

I don't see my photoshop purchase in my orders on my adobe profile. My lightroom purchase is there, however. If I try registering the photoshop cs5 I receive a message that the product is already registered. If it's registered why will it not show on my purchased products?

You need to contact Adobe Support either by chat or via phone for information about your account.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Similar Messages

Radial filter does not show in Photoshop CS5

Hi,
I am using the trial of LR5. I have made some adjustments with the Radial Filter. When "opening as a smart object in CS5," the radial filter adjustments do NOT show up. Crop does, basic exposure adjustments, but no radial filter.
Anyone know why? Would it show up in CS6? I do not want to go to CC.
Thanks much for your help.
MF

Just so you understand, LR5 can pass the Radial data to ACR 8.1 in CS6, but you won't be able to alter the radial filters (or any of the LR5 only features) unless you go to ACR 8.1 in Photoshop CC. So, a SO in ACR 8.1 in CS6 will still be limited in terms of what you can and can't do in CS6.

Error of PO - "Purchase Order Does not exists"

Dear Experts,
Here i am facing one error of Purchase Order Creation and its further processing.
I have created purchase order and saved it, system issued message that, Purchase Order XYZ is created. (I have taken trial for 2-3 Purchase orders).
When, i am posting Goods Receipt for the PO, system is issuing the error message, Purchase Order does not exists.
Also in ME2M (PO list display) and Me23N (Display PO),
system is issuing the same message - Purchase Order Does not exists, but in PO Creation it is generating Purchase order normally.
Here is no matter of release strategy, because, PO release is not configured.
Dear Experts, Please guide me on the issue !
Thanks in advance !!!!

there can be hundred of different reason for a failure. Most common reason is a problem with the number ranges, e.g. system tries to create a record with a number that is already there.
This can happen if the number range was reset (or transported from a developement system).
But transaction SM13 gives you all the details.
There you see a line for each posting failure. Double click this line again to get more details.
There you will certainly find a line in red that indicates in which function the failure ocured.
Double click this red line to get more info. Use the buttons above to see the content of the posting. For some failures you can create a dump that gives you much more details.
Best you sit together with an ABAPer who can certainly tell you more how to read a dump and how to find the reason.

Image Processor does not start through Bridge CS5

Image Processor does not start through Bridge CS5, it starts only PS and nothing happen. I do not know, how to repair it.

Most likely you do not have the startup files checked.
In Bridge go to edit/preferences/startup scripts. Make sure you have a check mark for Bridge and Photoshop. Without that they can't talk to each other.

Lightroom 5 apparently does not recognize that Photoshop is installed.

I just installed Lightroom 5, and it does not seem to recognize Photoshop CS5.1, which has been installed for some time. When I click Photo>Edit In, the option for Photoshop and all of the other related Photoshop options, such as Merge to Panorama, etc., are not active, so clicking on them does nothing. This occurs when Photoshop is open. It's as if Photoshop is not installed. Is there something I need to do to ensure that Lightroom 5 recognizes that Photoshop is installed?
I'm not sure whether the problem is that Lightroom does not recognize that Photoshop is installed or that there is some problem that prevents access to Photoshop from Lightroom.
I am using Windows 7. In Preferences for external editing, I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None.

I guess that the problem could be caused by 32bit and 64bit mismatch. Both applications should be 32bit or both should be 64bit.

Planned Order Does not exist

my Stocks and requirements list shows an MRP element of DEPreq for a element data (halb part number). Double clicking on the element I see the pegged requirement part number and planned order. However. SAP says the planned order does not exist nor does the pegged requirement. I can trace upwards in stocks requirement to another part number. the Data element says DIRECT PRODUCTION. but again there is no requirement for that part nor can i get to the planned order for it either, SAP says it does not exist.
These are related part numbers which I suspect may have come from a common Bill of material; but there is no demand for the high level material but yet I have low level componenets in my Stock and requiremnts.
Is this a table inconsistency issue?
thanks in advance

Hi Borries,
Please go thru link below. This also could help enhance your knowledge in planned order.
http://help.sap.com/saphelp_nw04/helpdata/en/c1/376535449a11d188fe0000e8322f96/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5b/ae39704b8611d182ba0000e829fbfe/frameset.htm
rgds,
nanthakumar

Windows control panel routine to designate Elements 12 as my default editor does not list the program. It loaded OK and accepted the key. Your regular help line could not help. What to do?

Windows control panel routine to designate Elements 12 as my default editor does not list the program. It loaded OK and accepted the key. Your regular help line could not help. What to do?

Hi Robbie,
The editor program is NOT under the organizer path as you mentioned in your last message. The actual editor program is at the location I gave in message #1 i.e. as follows
"C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
The one under the organizer is actually the Welcome screen which you have probably set up to go directly to the editor.
If you go to the Open With screen I showed in message #3 and browse to the actual editor as given above, it should show up in your list.
If it doesn't, then Windows is playing up again - and we have to take extra steps.
Brian

I want to transfer a movie I have downloaded from itunes to my new IPAD. I have been on the itunes help menu, it tells me to look under 'devices' tab for IPAD. BUT there is no 'devices' tab and it does not list my new IPAD. Help!

I want to transfer a movie I have bought in itunes to my new IPAD. I have been trying to work how to do this for 3 days now. I have accessed all the itunes help and forums and wiki online. They all tell me to go to the DEVICES tab on itunes and select IPAD then sync. YUP seem simple, BUT there is not DEVICES tab listed on my itunes and it does not list IPAD. Years ago I set up my IPOD no problem and that is listed, but not the new IPAD. Can anyone help? I would love to be able to actually watch films on my IPAD!! thanks

If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

MIGO error 'Purchase Order does not contain a confirmation control key'

Hi,
while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
Still why this message coming, what setting would be bringing this message
Please clarity

Hi,
Until the installation of Note 589422 (with SP SAPKH46C43) you could due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.
This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
589422 Several inbound deliveries can be created with MIGO :
"Implement the program correction.
With Transaction SE91 create message M7394 with the message text:
Purchase order & & does not contain a confirmation control key".
After you implemented this correction, when you want to create an
inbound delivery with Transaction MB01 or MIGO or with
BAPI_GOODSMVT_CREATE and if the purchase order does not contain a
confirmation control key the system displays error message M7394
"Purchase order & & does not contain a confirmation control key".
Hope this can explain the error you met.
Regards,
Mauro

Sales order does not allow make-to-order production

Dear Friends,
I am trying to do do planned order for sales order in MD50 it was showing the error message as
"Sales order does not allow make-to-order production"
Can any one solve this
Shakthi

Hi Shakthi,
It is also possible to set the priority for Requirement Type determination like
0 Material master strategy, then item category and MRP type
1 Item Category and MRP Type
2 as 1, with check for allowed requirement type.
The transaction for this is same as "Requirement Type Determination :
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
Look for "Source".
In this transaction, Please, check "Requirements".
Please, make sure of the following 2 things :
1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
I hope this should solve your problem.
Regards,
Sandeep

IN BW UCCHECK transaction for Unicode does not list Transfer/Update rules

Hi All,
We are going to update our BW system to install Enhancement Package 1 SP 7 on our BW 7.0 and we are going also to convert our data base to Unicode.
We used the UCCKECK Transaction to have a list of the abap programs to be modified before the u201Cconversionu201D procedure.
But the transaction does not list the abap code included into transfer rules, update rules and start routines.
Have you an idea to recover them?
And do you think the conversion procedure will abort if these kinds of routines are not adjusted or they will go in error at runtime?
Do you have experienced this problem?
Thanks a lot.
Antonella

Hi Nils, sorry for delay in replyu2026
Unfortunately we started to develop our routines in BW2.0 and checking some of them we receive the error u201CIn Unicode programs, the "-" character cannot appear in names, as it does here in the name "W-DATE" u201Du2026
And further more in subsequent BW releases the same error is only a u201Cwarningu201D into a NON Unicode system.
So I think we should check and correct all our routines before the Unicode conversion.
My best regards, Antonella

Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014.

in Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014. At first I didn't even see the option but I reinstalled Photoshop CC and now I see the menu option but when I try it there is a message that I need to use Photoshop CC. So I open Photoshop CC and the same thing happens? I can't seem to make it work.

Kitty,
Your screen shot is in the virus scanning queue, where it can linger for minutes, hours, days or weeks.
If you use the camera icon in the reply editor's formatting bar, you can embed your image in your post, where it will be viewable instantly.
then:
As for your issue, make sure all applicable scripts are checked in Bridge preferences:

CRM service order does not create purchase requisition

Dear experts,
CRM 5.0
We have a scenario where saving a released service order should create a purchase requisition in ECC and update the document flow. I have performed the following steps and still the PR isn't getting created.
1. Configuration in CRM and ECC for integration of service processes with logistics and maintaining the purchasing document types.
2. Maintaining standard pruchase groups in ECC table V_TMW01
3. Assigning standard purchase org to the plant
4. Making sure correct RFC destination is assigned to the logical system.
Am I by any chance missing some middleware steps as saving the service order does not even trigger anything in the system?
Thanks
Ritwik

Hi Ritwik,
Just check the following activities are maintained or not
1) You have created the subscription in SMOEAC with Site , Replication object and Service Order
     Process type in the criteria value.
2) You have maintained the customizing entry in CRM in spro for the following combination in logiistics
    Integration for Trans.Type Item Cat. Service Organization Org Unit (Service) Log. Scen.
Regards
Pavan.A

Phases/operation in process order does not exist

phases/operation in process order does not exist this error coming when cor6n is using.why?

HI
After creating Master recipe in C201, under the operations tab you need to define the operations involved in recipe . along with the operation column there is phase indicator column is there which is to be selected whether this operation is phase or not...
Check and revert
Regards
Anupam Sharma

Layout Options - Page Order Does Not Work Correctly

I have a Photosmart C7280 All-in-One printer. The Layout Option - Page Order does not work as expected. The User Guide (page 95) states that the default for a multiple page document is to print first page first. The manual states that to print last page first requires one to change the Page Order to "Back to Front". For my Excel, Word, Internet Explorer and PDF pages, I need to leave the Page Order as "Front to Back" if I want the last page to print first. This makes no sense. In addition, I can't get my Quicken reports to print last page first no matter what I try. Does anyone no why the Page Order does not work as expected for Excel, Word, IE and PDF, and does not work at all for Quicken?

Keisha,
If you uncheck the "show" option, then the corresponding HTML for that item is not rendered on the page. Thus, when you try to inspect that item via APEX_APPLICATION.G_F02, it simply doesn't exist.
One trick that I use when I want to have hidden items on the page, but not make them take up any space, is to concatenate them to items that will be visible.
Using your query as an example, I would re-write it like this:
SELECT APEX_ITEM.CHECKBOX(1,ROWNUM,'CHECKED')ATTENDED,
APEX_ITEM.HIDDEN(2,C.PARTY_ID)
|| APEX_ITEM.HIDDEN(3,C.PARTY_TYPE_CODE)
|| C.PARTY_TYPE_CODE PARTY_TYPE_CODE,
S.PERSON_ID,
S.PERSON_FIRST_NAME AS NAME,
C.PARTY_CASE_ID
FROM CASE.PARTY C
INNER JOIN DN.PERSON S
ON C.PARTY_ID = S.PERSON_ID
WHERE C.PARTY_CASE_ID = :P18_CDBCASE_ID
AND C.PARTY_SEQ_NO = :P18_SEQThus, the second APEX report column will contain the HTML for the hidden items PARTY_ID & PARTY_TYPE_CODE, as well as the value for PARTY_TYPE_CODE. When you submit the page, you should not encounter any issues.
Thanks,
- Scott -
http://sumnertechnologies.com/
http://spendolini.blogspot.com/

My Orders does not list my Photoshop CS5 purchase

Similar Messages

Maybe you are looking for