My PCMCIA-GPIB cannot start in win2000 system, tne error code is code 10

I installed the Driver V1.60 on my PC,and the PC can identify the card as PCMCIA-GPIB.But It cannot tested pass,as I open the Device manager,I can see the card is errored as "cannoe start,the error code is code 10",
and the resouce all are "?".

Hello,
This type of problem is difficult to diagnose without getting more information. Does it pass Diagnostics? If it fails, what part fails. Error 10 is not a common GPIB error. First I recommend going to http://www.ni.com/support/gpib/pnp2000/default.htm to troubleshoot.
If you cannot resolve the issue in this way, please go to:
http://sine.ni.com/apps/we/niae_asc.main
and request either phone or email support.
Kim L.
Applications Engineer
National Instruments

Similar Messages

Error 244: The DataFinder cannot start due to an internal error.

I have LabVIEW 2010 and, during Windows start-up, this error message pops up:
"The DataFinder cannot start due to an internal error.
(244): Please wait till the National Instruments PSP Service is running and try starting the DataFinder again or reboot your computer."
I have had this error message pop up for the past year so it is a recurring thing. It started showing up a few months after I had installed the LabVIEW program onto my computer, so I am not sure on what caused this message to consistently pop up. I find that it also causes a delay in the starting up of my computer--my other start-up applications will begin to show only when I close the error window. Please help! Thank you.
Solved!
Go to Solution.

Hi xcontradictorx,
It sounds like the National Instruments PSP Server Locator might not be started. Could you go to Control Panel >> Administrator Tools >> Services and locate the National Instruments PSP Server Locator? Double-click on it and make sure that the service is started. If it is, stop it and start it again (just by hitting the stop and start buttons). If it is not, start it, then go to the Recovery Tab and choose Restart the Service as the action for First, Second, and Subsequent failures.
If after change the settings for the PSP service the issue continues I would think that for some reason the PSP service is just being started late for some reason. Could you do a test real quick: disable the DataFinder in msconfig, reboot, then run the DataFinder.exe from C:\Program Files\National Instruments\Shared\DataFinderDesktop\bin. This should place the MyDataFinder app in your system tray (it looks like a yellow gear).
If this is successful, then we will need to change the order of startup services such that the DataFinder just starts after the PSP service.
Try the following:
1) Locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
2) Delete the DataFinder entry
3) Add a shortcut of DataFinder.exe to C:\Documents and Settings\All Users\Start Menu\Programs\Startup
4) Reboot
This should do all the standard Windows Startup (like starting services, etc.) and then launch the DataFinder.
One question: do you use the DataFinder at all? Either with DIAdem or the Data Finder toolkit? If not, you could try removing it from the Startup items. Just go to Start >> Run... and type "msconfig". Choose the Startup tab, locate DataFinder, and deselect it. Click apply. This will probably get rid of the error message.
Patrick H | National Instruments | Software Engineer

Error: The DataFinder cannot start due to an internal error

Hello,
I get the same error message every time I reboot my Win 7 PC:
"National Instruments DataFinder"
"The DataFinder cannot start due to an internal error."
"Please wait till the National Instruments DataFinder Index Service is running and try starting the DataFinder again, or reboot your computer. "
I tried finding a DataFinder Index Service in the Control Panel --> Admin,istrative Tools --> Services, as mentioned in this post http://forums.ni.com/t5/LabVIEW/Error-244-The-DataFinder-cannot-start-due-to-an-internal-error/td-p/...,
but there was none such listed service:
I cannot find any mention of a DataFinder or a DataFinder Index Service anywhere else on my PC. Can you please help to find out where this error is coming from and how to fix it? As far as I am aware, I do not use this DataFinder. Thanks!
Regards,
Brandon

Hello BrandonVonk,
The toolkit wouldn't show up in your installed programs list as it is more like a plugin to LabVIEW. Instead, pull up NI License Manager and go to Local Licenses > LabVIEW XXXX > Toolkits and see if it is listed amongst the toolkits you have installed. There should be a geen box next to it to indicate that it has been installed and activated.
Hope this helps,
Siana A.
Application Engineering
National Instruments

Unknown error in reservation system (API error type A code 3)

Good Day
I hope someone can give me some info for the following error.
I create a travel plan and when I click on Book I do some times get the following error
"Unknown error in reservation system (API error type A code 3)"
Can anyone please assist, as this does not always happens.
Regards
Jaco Nel

MONO PKGBUILDs have a number of unique requirements. Have a look at some of the official ones, like Banshee itself, or F-spot, for example.

Navigation Cannot Start from this location. ERROR ...

Navigation used to work fine on my X6, but since having to do a hard reset of the phone (due to other problems!) I cannot use the Navigation.
Everytime I get the error 'navigation cannot start at this location' and it doesn't seem like the phone can ever pick up my location.
I have tried un-installing and re-installing the application but to no-avail!
I haven't even wasted my time calling Nokia Support, as they are totally useless!
Does anyone have any ideas on how to fix this please?
I am gutted, my phone used to be amazing, now it seems as soon as I resolve one issue, there becomes another!!

After a huge update of my maps 3.06 using wifi direct to my N8 anytime I tried using destination on my phone only to get an error message "car navigation cannot start from this location". It didn't matter where I wanted to go to I got the same message. I use navigation more than any other app on my phone even phoning and texting and this is why I stay with Nokia so to loose my navigation would be a diaster. I googled the problem and found some tips to delete "cities" and any map files I could find but to no avail. I did a hard reset but stillI couldn't navigate and in OVI Store Installed Apps I could see Ovi maps and navigation 3.6 and also 3.08. I googled how to delete Ovi Suite Installed apps and got the tip to install Nokia Suite 7.1 which I did and deleted every file with map in i's namet . I was left with a file maps 3.08 4kb in size which couldn't be deleted but I continued and installed Maps 3.06 again and after a little fine tuning I can now navigate with data turned off again. Yahoooeeeeee

Cannot start Outlook 2007, a program error occurred. Tried lots of things....

I'm getting an error message of: "Cannot start Microsoft Office Outlook. A program error occurred. Quite Outlook and Microsoft Windows and then start again. A program error occurred. Quite Outlook and Microsoft Windows and then start again." when
I try to start Outlook 2007 running on windows 8.1. (standalone with pst file, not exchange)
I have tried:
Restarting computer (hard boot)
Running in safe mode: Outlook /safe
Resetting the nav panel: Outlook /resetnavpane
Running scanpst on the pst files.
Outlook /cleanprofile
Creating a new profile
Checking if windows search is running (it was) and restarting it.
All with the same error message.
I'm stumped. Any ideas how to get Outlook to open? Was there some sort of windows update that ran last night and messed up Outlook? It worked at end of day yesterday.
Thanks in advance.

Thank you for the update, seems the problem has been resolved, right? If this issue comes back or you need further assistance on it, please feel free to contact us.
Cheers,
Steve Fan
TechNet Community Support

Cannot start from the system after rescue and recovery

I have T42 and did "restore factory contents." In the process, I use IBM product recovery CD from 1 to 6 and reboot. However it does not start from Windows XP but IBM rescue and recovery with rapid restore. I cannot get out form this although I restart the computer. I appreciate any advice. Thanks.

Hello and welcome,
My memory is a little fuzzy on this, but IIRC some of the older laptops used a 2-step recovery process. You first did the recovery from CD which put the recovery image and restore program on the HD. One the next boot, the restore program starts, and you select to restore your drive from there.
So, do the recovery from media, reboot to the newly installed restore program, and select to restore your hard drive.
I hope that makes sense... and applies to your machine...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Cannot start Skype because system is unavailable

my skype is unavailable

Try to reset all Skype settings.
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Cannot start services in Mewdia Center (errors 0x80070005 and 70006)

I have an HP Touchsmart IQ506 desktop with integral TV tuner.
I recently did a system recovery (not restore) to Vista and upgraded to Win7 with my disc, then to SP1.
The computer searched for the tuner, but no luck.
I looked to the services, and they were not started, so when I tried to start the ehRecvr and ehSched, I got error messages as above -- Access denied.
I have been able to start and stop the MMCSS and WMP Network services with no problem.
The TV was working fine prior to the recovery, and nothing has been added to, or removed from, the system other than USB thumb drives.
I have not installed all updates since the recovery, so are there any which might result in this error message?
I had not installed all of the updates prior to the recovery, either.
How can I gain access to start the services?
I am the only one who uses the computer, and there are no kids in the house, so that possibility is out.
Suggestions?

Your TV Turner need different driver after you update OS
I just can find this
http://www.radarsync.com/drivers/id179187/AVerMedia_A327_Mini-Card_Hybrid_Analog%2fATSC
I found that based on your TV turner spec
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01481523&tmp_task=prodinfoCategory&cc=in&dlc=en&lc=en&product=3752245#N1796
I suggest follow up with HP to find the correct driver or software
good luck

Win2000 System Log Error caused by NI-Serial

I've installed a PCI-485/2 board into my computer along with NI-Serial 1.45. The board passes diagnostics and works properly, but every time I reboot my Win2000 computer I get a System Error log entry ID 18:
"No Parameters subkey was found for user defined data. This is odd, and it also means no user configuration can be found."
I've already tried reinstalling NI-Serial, but it didn't help. Can someone explain this error message?

Your system is completely unaffected by that message. (It just happens to be there for legacy reasons.)

Cannot start xampp -- 32 bit compatability error

just installed xampp for the first time. i used the latest version (1.8.1-1) from the AUR.
trying to start it by running:
sudo xampp start
gives the following error:
XAMPP is currently only availably as 32 bit application. Please use a 32 bit compatibility library for your system.
i am running a 64 bit system, but i have installed gcc-libs-multilib-4.8.0-4, lib32-gcc-libs-4.8.0-4, and gcc-multilib-4.8.0-4
the relevant section from /opt/bin/lampp (which /usr/bin/xampp is a symlink to):
# XAMPP is currently 32 bit only
case `uname -m` in
*_64)
if /opt/lampp/bin/php -v > /dev/null 2>&1
then
else
$de && echo "XAMPP gibt es zur Zeit nur als 32-Bit Applikation. Bitte verwende eine 32-Bit Kompatibilitaetsbibliothek fuer Dein System."
$de || echo "XAMPP is currently only availably as 32 bit application. Please use a 32 bit compatibility library for your system."
exit
fi
esac
trying to run
sudo /opt/lampp/bin/php
returns
bash: /opt/lampp/bin/php: Permission denied
the relevant permissions are:
lrwxrwxrwx 1 root root 9 Sep 19 2012 /opt/lampp/bin/php -> php-5.4.7
-rwxr-xr-x 1 root root 9.8M Sep 30 2012 /opt/lampp/bin/php-5.4.7
any ideas?

Still would like to get this working...

Cannot start iChat with friend - receive error "Invalid remote IP address"

I'm having trouble connecting to iChat with friend. We are both using AIM accounts and click on connect. The other person accepts the invitation and iChat tries to connect. It fails and I receive the error message, "invalid remote IP address". I'm am using Mac OS X Tiger while my friend has Leopard. Does that make a difference? I appreciate any feedback.

The Leopard end should make sure that in System Preferences > Sharing has Internet Sharing Off.
Also they should not be connected to the Internet twice such as Wifi and Ethernet to the same router.
Using Parallels in Leopard causes a similar issue.
In this case turn Off the two VPNs in System Preferences > Network (and set Parallels itself to get it's Own IP and not share the Mac's)
Some MIMO modem or Wifi routers can cause this.
Get a new modem or router is the simple answer to that one.
11:24 PM Monday; August 11, 2008

I cannot start iDVD. It shows error message -1712 under Lion.

Can´t I use my iDVD any more? Are all my iDVD projects "lost" because I can´t open them any more. Thx for help

First try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - launch IDVD and try again.
Happy Holidays

Intel Management Engine Interface, Device status: This device cannot start (Code 10).

hi Tec,
Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
Issue: my computer auto restart after 2 hours please resolved the issue
Logs captured from System summary:
[Problem Devices]
Device PNP Device ID   Error Code
Intel(R) Management Engine Interface
PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.
Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled.

Hi Jeenny,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I cannot start RSA1 anymore

The following error message is coming up:
Entry in inbound table already exists
Message no. E0 412
Diagnosis
Inbound parameters already exist in the partner profile under the following key:
/T90CLNT090/LS//RSSEND//// (T90CLNT090 = our BW system)
This relates to the key fields in table EDP21:
SNDPRN Partner number
SNDPRT Partner type
SNDPFC Partner function
MESTYP Message type
MESCOD Message code
MESFCT Message function
TEST Test indicator
Procedure
Please check the EDI partner profile.
Execute function
I checked TA WE20 and found that NO partner profile for the BW system (Myself connection)
Can create a partner profile for BW system:
Partner No. : T90CLNT090
Partner Type: LS
Type: US(user)
Agent: PROGRAMMER
I can save it, but if I start RSA1 the above mentioned error message is coming up again and
the partner profile in WE20 has dissapeared!

Hi,
Check below link:
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/cannot-start-rsa1-after-system-copy-846680
Thanks
Sunny

My PCMCIA-GPIB cannot start in win2000 system, tne error code is code 10

Similar Messages

Maybe you are looking for