My printer does not recognize any network

my e-Station does not recognize any network

Hey there!
Exactly which model are you using? Any additional information would be great, such as what type of network you're trying to connect to and if you are connecting through a wireless or wired connection. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Similar Messages

  • Airport does not recognize any networks, no signal whatsoever, SOMEONE HELP

    Hello, I use an iBook at the office, i have been using it for several months here and at home, worked fine until yesterday, logged on in the morning everything was working fine, until airport had no signal, it did not recognize any networks, at first i thought it was a problem here at the office, all the other computers are working.
    I tried it at home and it doesn´t recognize anything at all.
    The network status says that airport is turned on but it is not connected to any network.
    It`s clearly a problem with my computer, not the network, can anyone help?
    Regards
    Rodrigo

    Rod1, Welcome to the discussion area!
    Verify that the antenna wire is still properly connected to the AirPort card. It may have come loose.
    If you have an iBook G4 you can use the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card to verify that the antenna wire is still properly connected to the AirPort Extreme card.

  • Westell 327W gateway does not recognize Brother network printer

    The Westell 327W gateway does not recognize Brother network printer model MFC-490CW.  Any idea?

    I took a look at the Brother www site and would recommend the following:
    Temporarily Connect the Printer to the Network with an Ethernet Cable
    Run the Brother Installer Application to reconfigure the printer for Wireless (CD That Came w/ Printer)
    You will need the Network Name (SSID) and Passcode (WEP Key) from your Router.
    Once configured you will be able to disconenct the Ethernet Cable and use it wireless.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
    If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me

    hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me

    Ask the carrier in the US who the phone is locked to if they will unlock it for you - put an unlock request into that carrier.
    Other than that and if they refuse to unlock it, then there is nothing you can do except buy a new phone.

  • HT4623 My IPhone 4S does not recognize any wi-fi network.  I have turned it off and on a dozen times and tried 6 places which have wi-fi.  Help

    My IPhone 4S does not recognize any wi-fi network.  I have turned it off and on a dozen times and tried 6 places which have wi-fi. 
    I am trying to update to 7.0.2 and cannot because I cannot access a wi-fi.

    Give this a whirl and see if this helps.
    Forget the network on the device and turn wifi off.
    Turn bluetooth off. (Not sure why, but seemed to help with others)
    Turn on airplane mode and then off again.
    Reconnect to you network and open up a browser to confirm connection.

  • For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

    For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
    We are getting below error.
    The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
    COuld anyone please help us to know, How it can be resolved?
    We also have this below error.
    System Response
    If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
    If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
    Procedure
    The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
    Procedure for System Administration
    Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
    Additional Information:
    System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
    No authorization to log on as a trusted system (Tr usted RC=0).
    /TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
    For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    I have an external firewire burner; it never shows on the desktop unless I insert a CD or DVD - that icon will then show (if I have my preferences set to show those on the desktop). Hae you checked in Disk Utility (Applications > Utilities) to see if it is listed under drives?

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

  • I am now able to receive emails in MAIL, but Yosemite's Mail program does not recognize any of the server's connections that have worked for years!  What do I do next?

    Yesterday, I was unable to receive emails from Google but was able to receive them from another server - but then receiving them began to work again - but now I am unable to send any mail - Yosemite's Mail program does not recognize any of the server's connections that have worked for years, !  What do I do next?

    Mail troubleshooting - Yosemite
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Windows XP re-installation does not recognize any hard drive - help

    Hi,
    I have X60s Model: 17044JU
    I have original XP installed.
    My computer is very slow and I am trying to reinstall XP from my CD (and format HD so I clean everything).
    When Windows installations blue screen shows up and loads drivers etc then it tells me that it does not recognize any hard drive.
    I thought I may need SCSI or RAID drivers but since I don't have floppy I can not load them.
    Any help how to install new XP would be appreciated.
    Thank you
    Miron
    Moderator edit: Masked serial number to prevent mis-use.
    Solved!
    Go to Solution.

    Hi
    I changed BIOS setup from AHCI to Compatibility and indeed it worked.
    However there is easier way to reload new system on thinkpad.
    I didn't know that but you can press ThinkVantage button when you start your laptop and IBM utilities start up.
    Then there is an option to reload the system to be in original state as shipped from the factory. It loads or drivers and initial programs. It also formats your hard drive.
    I found it pretty convenient.
    Thanks for help.
    mc

  • Itunes does not recognize any calender to synchronize with

    My computer is repared and has a new hard disk.
    I have installed the latest version of iTunes and Outlook 2010 on my computer.
    I want to synchronize my iPad with my computer, but iTunes does not recognize any calender to sync with.
    In the old situation I synchronized my iPad with Outlook 2003. That worked fine.
    During the repare-time my iPad has become leading.
    How can I solve my problem

    Hello SCorky,
    The following article provides steps that can help get your devices back into iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • G3/OS 10.3 does not recognize the network

    I just mounted a new Airport network card into a (WiFi capable slot) iMac G3 (576 Mb RAM) running OSX 10.3. After restart, the Airport icon in the toolbar is present, albeit all gray, as one would expect before connecting.
    My network is served by a D-Link 801.11G WiFi router. SSID is not cloaked - it is broadcast and freely accessible: It works, several (non-Apple) laptops recognize the network and connect to it fine.
    However, my iMac does not see the network, neither from the Airport icon in the toolbar nor scanned from the Airport Setup Wizard. I located the iMac right next to the WiFi point to eliminate any signal strength/interference issues.
    I will bring an Airport iBook G4 as well as an Airport Express wireless point to check if there is something wrong with this iMac's card, and will also bring in a long CAT5 patch cord to hard-connect the G3 (to download any Airport patches or firwmare upgrades), but was wondering if anyone has any thoughts on why a non-cloaked 802.11G network would not be recognized by my iMac.
    SK
    iMac G3 slot (blue) Mac OS X (10.3)

    Ensure that you have the antenna wire properly connected to the AirPort card in the iMac.
    Also ensure that your D-Link is configured to work either in 802.11b/g or "802.11b only" mode. Since the original AirPort card in your iMac is 802.11b, your router must be in a 802.11b compatible mode.

  • HP Pavilion Elite e9120y bios does not recognize any cd/dvd/bluray or hard disk drives

    I erased my hard disk to install Windows 7.  Now my computer intermittently does not recognize that there are any drives attached to the sata ports.  I go into BIOS pressing F10 and it does not list any drives at all.  I have a DVD burner and a bluray and a western digital 1TB hard drive connected.  Sometimes they show that they are connected other times it doesn't.  It's strange.
    When it does recognize there are drives connected, I boot up from the Windows 7 DVD.  Then I try to create a partition on the hard drive.  The installation recognizes a 930GB hard drive with no partitions.  Every time I try to create a partition, it says I need a driver for the hard drive.  I have a driver that I downloaded off of HP's website yesterday, the driver for nvidia sata.  I put it on my usb drive.  It recognizes it but says it is the wrong driver.  I don't know what else to do.  I have built dozens of computer and repaired hundreds, but I have never run across a problem like this and I hope you can help me.

    Thanks for your help, but that's exactly the driver I used.  It didn't work.
    My problem is not just with the hard drive.  All three drives (two optical, one hard disk) should show up in bios, whether or not there is a disk in the optical drive or a partition on the hard drive.  It intermittently stops detecting the drives.  One time I boot and go into BIOS they are there, and I can run installation of Windows (partially).  But if a turn off the computer and turn it back on, they've disappeared.  Sometimes they will be detected, sometimes they won't.
    I'm thinking the driver problem with the Windows 7 Professional x64 installation is somehow connected to the drives randomly not showing up.  All drives stop showing up at the same time, not just the hard drive.  So it's not a driver issue.  It has to be connected to the BIOS and motherboard.
    This computer is only 4 months out of warranty.
    Any more help would be appreciated.

  • Adobe reader XI on xp does not recognize wireless network

    upgrade to reader XI but can not connect to internet 'cause does not recognize access through wireless network

    Good morning Michael and thank you,
    Little introduction. Agronomist, family farming enterprise, 53 so I am not native digital. Want to put info on and about my work in the cloud, considering adobe and google, first trying to master it, later will need more services. Several laptops running on windows 7 and XP, connect via wi-fi on cable or 4GLTE; the problem arose in the xp platform in the adobe reader XI, as a stand alone, it displays message that can not connect to the internet, meanwhile the google chrome is up and running, I disable the PDF plugin of chrome, and try different ways on the matter but it was of no use. The problem is with adobe XI on xp, could be some sort of interaction with chrome, but unable to fix it, moreover, only your paid services has, as far as I could find out, have real support, but usually I go first to try and master the thing, and try it in order to see if I can manage the thing, but when I run into trouble could not find any help (besides this, that it is a help, but did not know the outcome from the start). In the other platforms operate well and I like it so far.
    Best regards and a good 2015.
    Roberto Tisnes
    [auto-reply deleted by host]

  • DNG Converter 6.4 does not recognize any RAW files

    Hi,
    I have updated DNG Converter from 6.2 RC to 6.3 and 6.4. DNG Converter 6.2 RC from Adobe Labs recognizes all my RAW files (Canon PowerShot S50, PowerShot SX1IS, EOS 400D). The official releases of 6.3 and 6.4 do not recognize any RAW files of these cameras.
    I select a directory, where the raw files are located, but DNG Converter tells me that no files where selected. With 6.2 RC, I select the directory and everything just works fine.
    What's wrong with this picture?
    atb,
    MOS-6502

    Ahh, I forgot:
    System is Windows Vista Ultimate 32bit, patched up to date.
    atb,
    MOS-6502

Maybe you are looking for