My printer is not taking pages properly.

my printer is not taking pages properly and also the pages bend towards left side while taking initially.

Hello kgr1,
Welcome to the HP Forums.
I see that you are having some paper feed issues.
I do have a few suggestions that we can try in the attempt to resolve the issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please check the Paper Clear out door that is located on the bottom of the unit for any bits of paper that may have been torn off in the past.
Let me know how you made out and if you have any other questions or concerns, please feel free to ask.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

My printer is not taking hold between two print ? What Do i do ?

Hello Sir ,
I have Hp Laserjet 4200n Printer.Operating System installed is Windows XP,But this printer is not taking hold between two print ? What Do i do ?
Regards
Vishal Bhadle
09922222700
[email protected]

It depends on exactly what printer you have. For example, if you have an old Epson printer that is not AirPrint compatible, there is an iPad app called Epson iPrint that will allow you to print from certain selected programs (e.g., Safari, photos).

The printer is not lined up properly on portrait orientation.

HP Photo smart 7520 The printer is not lined up properly on portrait orientation. The margin at the top is too high and chops off all but the bottom portion of the letters on the website address. On Word all of my documents are set to close to the top with a larger margin at the bottom than the set up calls for.
Windows 7 Professional

Please check the paper size loaded in the printer input tray, the size requested from application (document size) and the paper size configured in the printer drivers.
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

Live View Not Rendering Page Properly

Can someone explain why the LIVE VIEW in DW5.5 wouldnt render the page properly? I have a site that I developed, and when I view it in every browser... FF, IE, Opera, Safari, etc there are no errors and the page renders properly. However, when I view a page in the Live View, my footer section (which is done by a server side include) renders skewed far to the right. It must have something to do with that SSI, because I have other SSI's on the page and they are fine. It's just that one single one (the footer).
As I said, the site renders perfectly in all browsers, just not in Design View. I am evaluating DW5.5 for use using the trial period, so perhaps there is some feature that's turned off? The code for the site is a bit too much to put here, but right now I'm just looking for reasons that there would be such a drastic difference.
Thanks.

To paste code, go to the web forum (email doesn't work for this).
Click on 'Use advanced editor'
>> (insert icon) > Syntax highlighting > plain.
Paste your CSS & HTML code into the box.
Code looks like this........
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Delta upload not taking place properly

Hello Everyone,
I am trying to load data from R/3 to BW.
My data target is ODS.
For the first infopkg i m doing "initialize delta update".
Now i am making changes in particular field in R/3-say i am changing the name of the proj from ABC TO XYZ.
Now I m scheduling delta infopkg.But its not displaying the change. i hv even added new record in R/3 side and then tried wid delta infopkg but its still not taking the update.
I have defined Generic delta for my datasrc.delta specific field is "PROJID" and under settings i have checked "New status for changed records".
plz help.

Hi,
The SAP help on this DS recommends these steps
When you extract the documents for the first time, select the complete posting period.
SAP recommend that you carry out initialization and full upload in a number of steps in order to create smaller packages. To improve the performance, select an update via the PSA. The data is extracted in accordance with the selection criteria. In this case, the posting date of the documents is used as the selection criteria.
Initialize all future posting dates, even if the enhanced selection area does not yet contain any documents. The new documents are automatically entered by delta processing.
Carry out delta processing at regular intervals. We recommend that large utility companies carry out delta processing on a daily basis. Only documents with closed reconciliation keys can be processed.
Refer
http://help.sap.com/saphelp_nw70/helpdata/EN/87/c299397f3d11d5b3430050dadf08a4/frameset.htm
Hope this helps.
Thanks,
JituK

Print Services not logging pages printed

When setting up a print queue, we seem to have two options:
1 - Press the plus button, enter the printer's IP address and give the new queue a name.
2 - Add the printer to the print server, then share it using the queue that appears in Server Admin/Print.
If we add printers using method 1, we have to use the "Generic Postscript Printer" ppd but page logging works correctly. If we add printers using method 2, the user can use all the printer's features but pages aren't logged.
Anyone know of a way to set the printer's ppd correctly while still having the printed pages logged?

I forgot to mention, the printers show up in the client's default browser as "queue_name @ printserver" no matter how we add the queue to the server. Printing itself works perfectly, so far as the pages all come out the way we expect them too.

Safari not loading page properly

Hi all,
I have a fairly specific problem with Safari (8.0.3 on OS X 10.10.2) in that the Stripe login page does not load properly for me. All I see when I go here is basic HTML: http://dashboard.stripe.com/login
In terms of troubleshooting, I have tried the following
Disabled Extensions
Disabled plugins
Emptied Caches
Cleared cookies and other website data
I then decided to create a new user on my Mac to see what would happen. In the new user's Safari, the page loads exactly as it should.
So, my question is, what else can I do to troubleshoot this? Have I missed something?
Cheers,
Pete

Back up all data before proceeding.
Quit Safari if it’s running. Then select
           ▹ Force Quit…
from the menu bar. A small window will open with a list of running applications. Safari may appear in that list, even though you quit it. If so, select it and press return. Close the window.
Step 1
Hold down the option key and select
          Go ▹ Library
from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
          Caches/com.apple.Safari
          Caches/com.apple.Safari.SearchHelper
          Caches/com.apple.SafariServices
          Caches/com.apple.WebKit.PluginProcess
          Caches/com.apple.WebProcess
          Caches/Metadata/Safari
          Preferences/com.apple.WebKit.PluginHost.plist
          Preferences/com.apple.WebKit.PluginProcess.plist
          Saved Application State/com.apple.Safari.savedState
Leave the Library folder open. Try Safari again. If the problem is solved, stop here. Close the Library folder. If you still have a problem, continue.
Step 2
Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
Step 3
If Safari still doesn’t work, quit, go back to the Finder, and move the following items from the open Library folder to the Desktop (again, some may not exist):
          Cookies/Cookies.binarycookies
          Internet Plug-Ins
          Preferences/ByHost/com.apple.Safari.*.plist
          Preferences/com.apple.Safari.Extensions.plist
          Preferences/com.apple.Safari.LSSharedFileList.plist
          Preferences/com.apple.Safari.plist
          Preferences/com.apple.WebFoundation.plist
          PubSub/Database
          Safari
          SyncedPreferences/com.apple.Safari.plist
Here, "*" stands for a long string of letters, numbers, and dashes.
Note 1: You are not moving the Safari application. You’re moving a folder named “Safari.”
Note 2: This step will remove your Safari extensions, if any, and their settings. If you choose to reinstall them, do so one at a time, testing each time to make sure you haven’t restored the problem.
Try again. Your settings and bookmarks will be lost. The default set of bookmarks will be restored. Delete them all.
If Safari is now working normally (apart from the lost settings), look inside the “Safari” folder on the Desktop for a file named “Bookmarks.plist”. Select
          File ▹ Import Bookmarks...
from the Safari menu bar. Import from that file. Recreate the rest of your Safari settings. You can then delete the items you moved to the Desktop.
If the issue is still not resolved, quit Safari again and put all the items you moved to the Desktop back where they were, overwriting the newer ones that may have been created in their place. You don’t need to replace the files you deleted in Step 1. Stop here and post again.
If you don’t like the results of the last step, you can undo it completely by quitting Safari and restoring the items you moved or deleted in that step from your backup, overwriting any that were created in their place.

Touch pad not taking driver properly

I have a snyaptic touch pad on my laptop. It was well supported when I was using window 8 x64 and x86 as well as on windows 7 ultimate. But after
I upgraded my OS to windows 8.1 x64 it doesn't work properly. It shows my touch pad as a wheel mouse using PS/2 port. On going to setting in mouse properties->Device settings there are not any options to scrolling and other functions.
Just there are options for left button click and right button click. My laptop is Acer Aspire 4741G (It too supports
Alps pointing device but it doesn't work properly. My touch pad clicks automatically in quick random time so that i can't use it for moving the cursor and scrolling pages. It also worked properly when I was in windows 8 and windows 7 ultimate.)

Hi,
This could be driver issue.
Please try to download the latest driver for your touch pad, and install it in Windows 8.1 compatibility mode to check the results.
Otherwise, contact the manufacture to feedback the issue and wait for the updated package for Windows 8.1.
Kate Li
TechNet Community Support

Template not updating pages properly

I have several pages, all started from the same template. The path to an image in the template is <img src="../index.php" width="140" height="200" alt="Balgonie Baptist Church Logo"> but on the pages that are updated from this template they are:
<img src="index.php" width="140" height="200" alt="Balgonie Baptist Church Logo"> . The 2 periods from the source path are not there on the pages. I think something like this happened before, what am I doing wrong? I'm a newbe.

#1 .PHP is not an image extension. It is an HTML page containing server-side code.
Images should have file names with .jpg or .png or .gif.
#2 template.dwt files reside inside a Templates folder. That's why links in templates contain the leading dots -- ../images/somefile.jpg
#3 When you create a new page from template and save it to the root of your site, DW correctly removes the leading dots for you -- images/somefile.jpg. At least that's how it should work.
Nancy O.

Safari 5.1.5 not loading pages properly after Java install

Safari kept telling me I need to install a java runtime, so I finally let it, and now certain pages (like accuweather.com) take forever to load unless I turn off Java in preferences. The page background will appear but the "loading whatever # of #" hangs on the last number and just sits there until the page finally appears. Has anyone else had this problem, and if so, how can it be fixed?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

IIS not serving page properly

The issue is related to:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=602&threadid =1263709&highlight_key=y&keyword1=IIS
I have a master/detail spry section (using Spry 1.6) running
off of II6. Problem is some of the scripting on the site is running
inconsistently. I am using an HTM table as the data source in a
file with .htm extenstion.
The page loads fine, but none of the elements on the left
hand master side are clickable. I changed the mime type of the JS,
xml, etc, but the behavior has not change.

The issue is related to:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=602&threadid =1263709&highlight_key=y&keyword1=IIS
I have a master/detail spry section (using Spry 1.6) running
off of II6. Problem is some of the scripting on the site is running
inconsistently. I am using an HTM table as the data source in a
file with .htm extenstion.
The page loads fine, but none of the elements on the left
hand master side are clickable. I changed the mime type of the JS,
xml, etc, but the behavior has not change.

Problems with Safari not loading pages properly, Problems with Safari not loading pages properly

I updates to the newest version of Safari via apple and now none of my pages load correctly. Most of the times I have to reload the page several times to get everything loaded. When I first load a page there are little question marks where images should be, sometimes it doesn't load at all and says it can't find the server or something. Some sites just load super funny. All I did was load the newest version of Safari. Anyone have any idea on how to fix this?

http://support.apple.com/kb/TS3408
http://docs.info.apple.com/article.html?path=Safari/5.0/en/9313.html
http://docs.info.apple.com/article.html?path=Safari/5.0/en/9274.html

New MacBook Air does not read Pages properly

I migrated my old MacBook Air (2 years old) to my new MacBook Air (one month old) transferring Pages application and many documents in Pages, which I use to edit a magazine.
At first my new MBA refused to open any Pages documents, so I re-installed iWork from CD (using Remote Disc from my iMac). Now my new MBA does open Pages documents, but with disrespect for fonts:
- what was in bold appears in regular font
- what was in italics appears either in regular font or bold+italics
This is a complete disaster as it means I cannot work in the magazine when I travel with my MBA. Plus, I have already given away my old MBA to a friend!
Can anybody help?
Thank you !
Isabel

Lelel wrote:
I migrated my old MacBook Air (2 years old) to my new MacBook Air (one month old) transferring Pages application and many documents in Pages, which I use to edit a magazine.
Did you moved the folder
Macintosh HD:Library:Application Support:iWork '09:
from the old machine to the new one ?
This folder contain a lot of required items.
Without them, iWork's applications can't work.
Don't forget that the license clearly state that *_you must remove the app from the old machine_*
Yvan KOENIG (VALLAURIS, France) mardi 15 février 2011 11:04:24

Printer is not working spool processor shows error

Dear Experts,
Please solve my query, here one printer is not taking any print at sap level and the same printer takes the print at windows level
For that I checked in spad configuration but that configuration is ok
I did not get why its getting
Please solve me if you know about this
Regards

hi Francisco Javier Hernanz
thanks for your adivce and just now i found Error in sm50 (processors overview)
in sm50 processors i found one error at opposite of one spool processor
i selected that error and display file and it opens trace data ( dev_w28) file
in that
ERROR => RFC-GUI: ThSendAndWait in read returned: 18 [abrfcsys.c 6920]
ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcsys.c : 6925
please give me solution if you know
regards

Printer is not working properly after I updated OS

My printer is not working after I updated my OS software. It will only print out pages as a mirror image. All the programs are not printing properly. Could really use some help fixing this issue.

What software did you update?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue. Have you contacted the printer manufacturer tech support? Read the printer's user manual? Your printer drivers updated to match your updated software?

My printer is not taking pages properly.

Similar Messages

Maybe you are looking for