My project was not saved and is now gone...where did it go?
Help
My project was not saved and is now gone...where did it go?
Check to see if Premiere autosaved your project. Open Premiere and start a new project.
File Menu > Project Settings > Scratch Disks
The last entry is 'Project Auto Saves'. See where this is pointing on your computer. If you are very lucky, Premiere may have autosaved your project from before and you'd be able to find it and open it that way.
Otherwise, you won't be able to recover a project that wasn't saved.
Similar Messages
-
I have pre ordered books, when available download was not completed, it now shows book in library but indicates " paused" i have gone back to store and purchased tab and tried to download again but it is not allowing?
Sorry, it's not a device it's a resource that's missing. None of my books will open.Please help
-
I used to use this feature multiples times a day as it was a great way to look up all correspondance that a person had sent through.
This option is gone now with mountain lion and I am wondering why as it was great! you just had to click on an email address and you could select looking it up within mail.Hi There Linc Davis,
Wow, you are the best.
Yip this is what the website looks like. Great job Linc Davis.
Not surprised that the "Shop" tab is missing. Darn.
Well can you try to access it's "sister" website: astralmusic.com and astralmusicshop.com?
Since you are awesome with the "Flash" can you investigate if this website has a issue withis this "Flash" too?
Please Linc Davis -
Before when I scanned a photo, it would automatically save and ask to scan another photo. Now, the photo is not saving and it doesn't ask to scan again. Help?
What Scanner and scanware are you using....?
Check out > Mac Basics: Using a scanner
I only use Image Capture and it always sends my photos to wherever I tell it to. -
i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?
Is it this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Otherwise:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message saying that X11 was not supported and directed to a site to download an update "XQuartz" which I did. Now when I try to launch WordSearch9 I get a message "X11 cannot be found". I did follow the instructions to download and install XQuartz, but there still seems to be a problem. Anyone have an idea?
Your report indicates Mountain Lion, but your footer indicates Lion. I'll assume you're on 10.8.2; on the current Mountain Lion version.
Rebooting is fine.
The posted diagnostics look like there might be a problem with the Xquartz install, or it is not starting, or it's not authorized for the sandbox. (But I don't know enough about that to be certain.)
Try launching X11.app directly from your Applications > Utilities folder, and see if that works, or if shows any dialog boxes, or that reports any errors.
If you had an Xquartz kit installed and it's not the 2.7.4 (current) Xquartz kit, then please update to that version. (I'm assuming that site is where you got your Xquartz kit from, too.)
I'd also suggest also discussing this more directly with the Xquartz folks via mailing list or the IRC channel, or collecting up the Xquartz logs and then posting a bug over at the Xquartz site; here are the details on bug reporting for Xquartz. -
I have a powermac G5 running 10.5.8 I kept getting a screen that told me to upgrade, which I did, then was told it was not compatible and now I have nothing.
How can I get back to my old system or download one that will work.'''bold text'''Firefox 4+ versions don't support the old Power PC architecture.
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/<br />
http://tenfourfox.blogspot.com/ <br />
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported -
Error"Update was terminated' while doing picking and data was not saved
hi experts,
I have created a sales order. for that i created a deliery.then i created shipment .and i have put pick qty and batch.
it gives a message Express document " Updated was terminated "received from author XXXX.
and picking is not saved and i'm not able to do PGI.
Please help me.....
Thanks in advance,
riaHai,
Analyse this error in ST22 - ABAP runtime error or in SM13 - update request.The system will show the error update records in red color. Click the error & see the problem in funciton module.THis may be because of no ranges problem or any changes in print out program. Also if u have any BADI activation for the sale order & any changes in this program also leads to this error. -
My Iphone was not unlocked and i accidentally upgarded my phone. Now it asks me to get insert a SIM without a PIN lock and would only let me make emergncey calls. How do i get phone working ?
You will need to establish an account with whoever the phone is locked with and restore it. Or you will not to unofficially unlock it again.
-
Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
My hard disk crashed and the backup of my library was not saved. Fortunatly my music files are on a seperate server. How can I sync my Playlists back in my library?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
I plugged my phone into my a different computer (mac) that was not mine and it asked me to restore the phone. I started to back up the phone, then ended the phone got unplugged in the middle of the backup. Now we can't find where the iPhone backed up.
If it there is a backup you will find in in ~/Library/Application Support/MobileSync/Backup. (Just open Finder>Go>Go To Folder..., past this in the path box and click Go.)
-
My iPad is trying to install an update of Pages for one week and doens't get it. Every time it begins a message " it was not possible do update now" shows up. What should I do? I can't lauch Pages till now.
The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562
-
I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created. It was only showing me an error message "EFI files are missing", I realized that it is trying to boot from the new partition I created for the installation of the linux I intended to do.
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
Oops... a server error occurred and your email was not saved.
after completion of mail content when try to send the message error shows as
"Oops... a server error occurred and your email was not saved."
This problems are being experienced very often since installation of Firefox version 5.0Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Maybe you are looking for
-
Dear Sir We are populateing the Binding object from the backing bean as the following code : public String writeToOutput() { DCIteratorBinding process = getIterator("processIterator"); process.getCurrentRow().setAttribute("SimpleElemet", "Simple Elem
-
How to add text to a pdf file using Access VBA??
I'm down on my hands and knees, begging. I have 300 files that I want to put a variable string at the top of the first page (centered, or at the right hand side). I am using Acrobat X and Microsoft Access 2010 and I do have the SDK and have spend o
-
Order and invoice for miscellaneous sales with down payment
I have followed follwing steps-- 1) MiSc type order (500 EUR) 2) VF01 with billing doc type VFZ (down payment) (200 EUR) actually m doing some testing work--- now next step is Cash the advance: According to the payment method of the customer, the inc
-
Differentiate between quantity contract and value contract?
Hi, How can i differentiate between quantity contract and value contract? The agreement type of contract is is not MK or WK , its custom created. regards N Banu
-
Hi ... After I have installed IOS 6 on my Iphone 4, the WiFi connection is trying to authenticate in the Apple site but the page is not found. Do you have any idea on how to bypass this authentication ?? Regards, Gilson