My router keeps disconnecting

And when i try to connect it says "Not connected" but i have internet?..

I have been having the same problem for a few months. I recently replaced my 54G router with a 150N and updated the drivers for my wireless card on my Dell laptop and it now works but I also have an IBM laptop that still connects but says it is not connected. It only stays connected for a short time then disconnectes and I must reconnect manually. Then the process repeats. This is what my Dell had been  doing. I can't figure out why one is now working and the other is not. The Dell is the main pc.
I am using mac filtering but have been before the problem started.
Thanks for any ideas or help with this.

Similar Messages

  • Wireless router keeps disconnecting...

    Hello there,
    I own a Linksys Wireless Router (BERW11S4). I recently updated it's firmware to the latest version (1.52.02) which supports WPA-PSK (TKIP).
    I have set the group renewal interval of 7200 seconds, which is the max the software will accept.
    My problem is after a certain period, it keeps disconnecting, which i believe is because of the group renewal interval, which can't be turned off. How do I eliminate this problem as it is really annoying to keep re-connecting half-way everytime?
    Thanks in advance.

    still disconnecting every hour and then...
    please help. im so frustrated.
    any other settings i should try?
    or solution?
    help me out 300N users!

  • Linksys WRT54GS Wireless Router keeps disconnected

    Hi, My wireless router WRT54GS keeps on disconnecting without any reason. I have also changed the channel to 11 but still the same issue. It connects for 1 minute and then it stops working even though the signal says "excellent strength" and all the bars are green.

    Hmm. I seem to be having a similar problem (see my thread). Check the cable that is pulugged into the back of the computer. That is where my problem lies. The computer doesn't seem to be reading it. If i get some info, ill help you.
    EDIT:You have to check the IP address of the computer connected to router. If you are getting an IP of 169.254.x.x, then the router might be defective.
    Message Edited by eviluchiha1 on 04-21-2008 02:27 PM

  • Lion iChat server - router keeps disconnecting/reconnecting

    I have an issue with the iChat server in Lion. While it generally works for logging in, presence and sending messages to users, there appears to be an issue with the Rooms component and the jabberd router. From system.log:
    9/5/11 12:27:56.273 AM Rooms: Starting up...
    9/5/11 12:27:56.273 AM Rooms: Loading persistent rooms from disk...
    9/5/11 12:27:56.274 AM Rooms: Finished loading rooms from disk
    9/5/11 12:27:56.274 AM Rooms: Connecting to XMPP server at 'internal.red-abstract.com' as 'rooms.internal.red-abstract.com'...
    9/5/11 12:27:56.566 AM jabberd/router: [127.0.0.1, port=64818] connect
    9/5/11 12:27:56.567 AM jabberd/router: [127.0.0.1, port=64818] disconnect
    9/5/11 12:27:59.020 AM jabberd/router: [127.0.0.1, port=64819] connect
    9/5/11 12:27:59.021 AM jabberd/router: [127.0.0.1, port=64819] disconnect
    9/5/11 12:27:59.283 AM jabberd/router: [127.0.0.1, port=64820] connect
    9/5/11 12:28:00.284 AM jabberd/router: [127.0.0.1, port=64820] disconnect
    9/5/11 12:28:00.291 AM Rooms: Component disconnected from router, removing all occupants from rooms
    9/5/11 12:28:02.094 AM jabberd/router: [127.0.0.1, port=64821] connect
    9/5/11 12:28:02.095 AM jabberd/router: [127.0.0.1, port=64821] disconnect
    9/5/11 12:28:04.310 AM jabberd/router: [127.0.0.1, port=64822] connect
    9/5/11 12:28:04.313 AM jabberd/router: [127.0.0.1, port=64822] disconnect
    9/5/11 12:28:04.318 AM Rooms: Component disconnected from router, removing all occupants from rooms
    9/5/11 12:28:05.232 AM jabberd/router: [127.0.0.1, port=64825] connect
    9/5/11 12:28:05.234 AM jabberd/router: [127.0.0.1, port=64825] disconnect
    9/5/11 12:28:07.738 AM com.apple.backupd: Waiting for index to be ready (100)
    9/5/11 12:28:08.041 AM jabberd/router: [127.0.0.1, port=64826] connect
    9/5/11 12:28:08.043 AM jabberd/router: [127.0.0.1, port=64826] disconnect
    9/5/11 12:28:08.328 AM jabberd/router: [127.0.0.1, port=64827] connect
    9/5/11 12:28:08.331 AM jabberd/router: [127.0.0.1, port=64827] disconnect
    9/5/11 12:28:08.336 AM Rooms: Component disconnected from router, removing all occupants from rooms
    9/5/11 12:28:10.939 AM jabberd/router: [127.0.0.1, port=64828] connect
    9/5/11 12:28:10.940 AM jabberd/router: [127.0.0.1, port=64828] disconnect
    9/5/11 12:28:12.348 AM jabberd/router: [127.0.0.1, port=64829] connect
    9/5/11 12:28:12.353 AM jabberd/router: [127.0.0.1, port=64829] disconnect
    9/5/11 12:28:12.410 AM Rooms: Component disconnected from router, removing all occupants from rooms
    9/5/11 12:28:13.966 AM jabberd/router: [127.0.0.1, port=64830] connect
    9/5/11 12:28:13.967 AM jabberd/router: [127.0.0.1, port=64830] disconnect
    9/5/11 12:28:16.422 AM jabberd/router: [127.0.0.1, port=64833] connect
    9/5/11 12:28:16.427 AM jabberd/router: [127.0.0.1, port=64833] disconnect
    9/5/11 12:28:16.432 AM Rooms: Component disconnected from router, removing all occupants from rooms
    9/5/11 12:28:16.433 AM Rooms: Component disconnected from XMPP server
    9/5/11 12:28:16.433 AM Rooms: Service is shutting down...
    9/5/11 12:28:16.482 AM jabberd/router: [127.0.0.1, port=64834] connect
    9/5/11 12:28:16.483 AM jabberd/router: [127.0.0.1, port=64834] disconnect
    9/5/11 12:28:17.439 AM Rooms: Shutting down
    This repeats over and over, quite frequently. Any good jabberd gurus know where I should look? I checked out the router.xml but nothing stood out as obvious.

    Had a similar thing just now with Mountain Lion (after much trouble post the Server 2.2 update) where the hash in these files eg
    /Library/Server/Messages/Config/jabberd/c2s.xml
            <!-- Username/password to authenticate as -->
            <user>jabberd</user>
            <!-- default: jabberd -->
            <pass>HASHED_SECRET</pass>
    /Library/Server/Messages/Config/jabberd/router.xml
            <secret>HASHED_SECRET</secret>
    and others in that folder all matched, but they mismatched with info in these plists…
    /usr/libexec/PlistBuddy -c "Print secret" /Library/Preferences/com.apple.Proxy65.plist
    /usr/libexec/PlistBuddy -c "Print password" /Library/Server/Messages/Config/Rooms.plist
    set those with eg
    /usr/libexec/PlistBuddy -c 'Set secret HASHED_SECRET' /Library/Preferences/com.apple.Proxy65.plist
    (use single quotes so the various hash characters like * and ! etc work)
    After that and an off/on of messages, the syslog improved and after a reboot went totally stable (wrt jabber anyway!)

  • Router hub 4 keeps disconnecting and restarting ev...

    HI MY HUB 4 ROUTER KEEPS DISCONNECTING AND RESTARTING  FLASHES ORANGE THEN GOES BLUE ABOUT 5 OR MORE TIMES A DAY.
    I HAVE HAD THIS PROBLEM WITH AOL THEN TALKTALK AND NOW BT PHONE LINE CLEAR AND NO PROBLEMS,
    IT'S JUST BROADBAND EVEN CHENGED FILLTER. ANY IDEAS 
    Solved!
    Go to Solution.

    Hi Welcome to the community forums
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
    once you have posted the information asked for then the community members can help you more
    if using a hub 4 locate these lines located in the hub logs
    Lines should look like this
    19:11:29, 07 Nov. (2290101.460000) DSL noise margin: 7.00 dB upstream, 6.10 dB downstream
    19:11:29, 07 Nov. (2290101.390000) DSL line rate: 448 Kbps upstream, 288 Kbps downstream
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    Please can you not use not use capitals as it is considered as shouting on a forum
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Linksys WRT120N Keeps disconnecting

    Greetings everyone!
    Well, my problem is that my Cisco Linksys WRT120N router keeps disconnecting, my family and me are all using the wireless connection. But sometimes the router just disconnect us all, its like its restarting, it only close down for like 5 - 10 secounds and then its back on. Sometimes it does it like every secound hour and sometimes it does it 3 times in 10 min. I usually play games on it and even tho I am the only one using it, it still disconnects. 
    We got 2 wireless cameras running on a secound router that is merged (Thats what the nerd that setted it up for us told me) with the primary existing router. I am not really that good at computer I just dont want to get disconnected all the time. 
    Have a really good weekend and take care!
    //Rasm8715.
    Solved!
    Go to Solution.

    Hi there,
    If this is true on both wired and wireless connection, isolate the concern by connecting your computer to the modem directly. Observe the connection while connected to the modem. If the connection is unstable behind the modem, you need to contact your ISP (Internet Service Provider) to fix the issue. If the connection is fine on the modem, reset and reconfigure the router. If the problem is present only on the wireless connection, you can reconfigure the wireless settings. Change the channel width to 20 MHz only and select channel 1, 6 or 11 to avoid wireless interference. Also make sure the router is on a higher and open location. By the way, it would help if the router’s firmware is up to date.

  • Wrt54g keeps disconnecting

    hi, i have a pc connected OS: win xp sp 2. connected wired to the router wrt54g v7 the other computer is a laptop connected wirelessly to the router the router keep disconnecting the pc and the laptop at random time. Can anyone help me with this problem. thanks regards, bongel

    Access routers setup page using http://192.168.1.1  ... you will see username & password ......
    Leave username blank & in password use admin ......
    Click on "Status" tab ...... it will show firmware version of the router ....
    Check the latest firmware from http://www.linksys.com/download .....
    After reset .... reconfigure the router ....

  • My router keeps dissconnecting

    my router keeps disconnecting then it will reconnect. but it is really a downer cause i have to wait like 2 or 3 minuites before it will let me connect again. it keeps saying that there is a problem connecting. plus when i am trying to play xbox live on it it is doing the same thing. which is really really a downer. any help would be appreciated...

    please let me know the router model number .. the isp details whether cable or DSL ... check whether everything works fine when connected directly to the modem ..

  • My internet keeps disconnecting

    Hi,
    I have seen many posts now about macusers having the same problem as me. I have recently upgraded to IOS Lion and have kept the software updted on a weekly basis.
    For some reason my wireless internet keeps disconnecting at speradic times during the day and it has become very irritating. It is not the connection as my PC, Iphone and Ipads are connected while both my Macbook pros decide to go wandering. I never had this problem when i was using the previous operating system but i see other uses had problems with that as well.
    Does anyone have any fixes for the problem or know of any patches that can solve the problems. Please help a very irritated Macuser.
    Thanks Nobby

    Well try upgrading the firmware of the router & keep on holding tightly
    the reset button in such a way that power light is blinking on the
    router & then do a complete network power cycle i.e., unplug the power
    cables from the modem & from the router & then plug in the power cable
    to the modem first once all the lights are solid green you could plug
    in the power cable to the router & check out it will definately work!!

  • WiFi keeps disconnecting in Mountain Lion 10.8.2 on Macbook Pro

    I have an early i7 2011 Macbook Pro. Since upgrading to Mountain Lion 10.8.2 my WiFi keeps disconnecting. There isn't a certain time it disconnects - sometimes it works fine for a few hours, sometimes for just 10 minutes. When the connection is lost, it shows that its connected in the taskbar at the top, however when going into network preferences it shows the WiFi as turned off. In order to turn it back on I need to restart the Mac.
    I have tried the following:
    reset SMC
    delete network preferences
    create new network connection
    add DNS servers
    Add manual MTU
    Require password to turn on/off WiFi / change network (still disconnects!)
    Change order of preferred networks
    I phoned Apple Care who told me to delete the network preferences, this worked for about 5 mins and then the problem returned!
    I cannot change the router settings as I connect to my employers network. All other employees using Window machines are working fine and my iPhone connects perfectly fine also.
    Somebody please help me! I feel my only option now would to do a clean install - not ideal! Apple, please HELP.
    Merry Christmas everyone.

    Hi - I have the same problem with my MacBook Pro mid 2010 which drops the wifi connection randomly (not necessarily when I move it or the lid - see other posts on this) and then often ends up freezing when I try to investigate.
    I installed Mavericks to see if that would resolve the issue but it doesn't.
    Somebody in one of these posts suggested it might be a faulty connection between airport card and mother board... which I suppose could be caused by a jolt to the machine (mine travels as hand luggage on planes every now and then).
    I am running OS X 10.9 on a 13 inch Mid 2010 MBP with a 2.4 GHz Intel Core 2 Duo and 4 GB 1067MHz DDR3 memory.
    If anyone comes up with an answer to this PLEASE post it here so that we can all resolve our wifi dropping/freezing issues!
    Thanks

  • WLAN keeps disconnecting on N8

    I now have a new problem with my Nokia N8. When i'm connected to my WLAN netwrok, it keeps disconnecting and reconnecting. I've reset my router several times. but it keeps doing it. It happends when i use the Dukto App and when I download files onto the N8. It's really starting to annoy me know. How can I get the N8 to stay connected to the WLAN network?????

    I go back and forth between two countries. in my house in mainland europe which has a Bluewin router, what you are describing happens all the time, then in the UK my phone works perfectly fine thorugh my virgin media wireless hub. Also works fine through all other routers and public wlan etc.
    So yeah i agree with kelevra, it has something to do with the hub. I dont know if theres a solution. probably not. its just once again down to nokia cutting corners with their sofware again i suppose.

  • Wifi keeps disconnecting, only at work

    I have a Macbook Pro Retina 13" and at work it keeps disconnecting from the router. I've tried a lot to try to fix it and there are certain conditions that apply (none of the fixes work):
    This ONLY happens at work and ONLY with my computer. There are also two Macbook Air, one Macbook Pro Retina, a bunch of PC's, tablets and phones connecting to it, but ONLY I get disconnected. I've tried maintaining a connection with around 10-15 other networks and they all work flawlessly.
    There are several wifi spots around.
    It disconnects randomly, at times it gets worse around lunch time. It can be 10 times in an hour, then stable for two hours, then one disconnect.
    I've tried several router channels.
    I have a DIR-655 D-link.
    Held Shift+Command+Alt and clicked the power button at startup.
    Deleted all other wifispots, the only one is the work one. Tried deleting it and added it again.
    Deleted several .plist files, don't remember which ones but Googled and tried it.
    Fixed permissions.
    Used Onyx (before Maverick update).
    Added a network location.
    Updated proxys to Google's public ones (8.8.8.8).
    Changed MTU.
    Restarted computer.
    No heavy load.
    I've done several changes to the router, none have worked. There's so many I cannot write it down here.
    It's NOT WEP, it's WPA2 Personal encryption, something we must maintain since it's secret material being broadcasted.
    Everything on my computer is updated to the latest version.
    No sleep mode is activated once connected to a power source. Only screen after 15 minutes.
    Changing router might work, but that might take a while since the bosses need to approve the purchase.
    If I disconnect Airport and then connects again it will work until it randomly disconnects again.
    None of my iPad or iPhone disconnects.
    It disconnects about 10-100 times daily.
    I'm currently trying to ping the router constantly in a hidden terminal window. Hopefully it works even though it ***** as a solution.
    That's all I can remember right now... I've tried a lot more without result. But if a suggestions arises I'll let you know if I've tried it before.
    Can it be some interference? The microwave isn't on. I have a monitor, external harddrive, Wacom Intuos 5, iPad and an iPhone close to the computer. None of these matter on other spots. None of my co-workers have the same problem. The exact same problem happened in OSX Mountain Lion so it isn't Maverick specific, but I write here because I have no clue where else to put it.
    I reason like this: it can't be a hardware malfunction since it doesn't happen anywhere else, it can't be the router either since my co-workers doesn't have the same issue. There's no heavy load since I basically just browse, but I do have Dropbox (I've tried limiting the bandwidth, didn't work) and a NAS and I am a designer so my files are rather large. So, my theory is that there's some sort of load that disconnects me from the router. No other here uses files even close to the size of mines so that is the only unique thing I can come up with, that and my placement. But we are in a big room together so the person of 7 that is furthest away from me is 3 meters. Is there a way to restrict the network load the Macbook uses? Like a cap. I've had this problem with routers before that just overloads routers.
    So... any help is very appreciated. It's a drag working like this.
    M.

    iMac 2011, the same WiFi disconnections problems after Mavericks installation.
    I've installed Mavericks on another disk and now I have WiFi disconnections every 30-35 mins. I rebooted to Snow Leopard and tested there and found zero problems. My WiFi WPA-2, 2.4GHz, Edimax router, another home devices doesn't have such a problem. Turn off and turn on the WiFi on iMac resolved the problem but only for another 30 mins. I tried to create another Location settings — the same issue. And it doesn't matter I use WiFi or no — disconnections still here. I run ping to router's IP — it timeouts when WiFi stops to work so it's not DHCP or DNS problem (I've also tried to use static IP — the same result). I don't have 5GHz WiFi so I can't check it. Also I've changed channels on the router — without results.
    I\m sure that this is a problem with WiFi drivers on Mavericks.
    How can we send such reports to Apple support — they must fix it in nearest Mavericks update!

  • Airport keep disconnecting every few minutes

    Hi,
    I don't know why, but my airport keeps disconnecting every few minutes, although it reconnects after that.
    I'm sure there's no problem with my router since other PCs in my home are fine.
    It's totally fine when I use my windows in the macbook (via bootcamp).
    Anyone has the same problem or anyone knows the solution?
    Thanks.

    I've had this issue for about a week and it has made my Macbook nearly impossible to use for anything other than local disk work.
    Last night I tried running the standalone upgrade and it worked beautifully, however, upon booting up this AM I'm back to square one, constantly dropping the connection, ran the standalone update again and back in business with no drops.
    While this is appears to be my temp workaround I don't want to be doing this on a daily basis.
    HELLO APPLE what is the deal ?

  • Yahoo keeps disconnecting on ichat on lion 10.7

    I am trying to use yahoo on ichat and its been working fine for the past days but today it keeps disconnecting and i cannot use it. when i connect to yahoo thru Adium it owrks fine. any ideas?

    HI
    Ports 80 and 443 should be open in most routers anyway.
    I cannot say I have seen a Table where there can be multiple Trigger Ports.
    If you are using iChat 3 then it can be written this was.
    Trigger  5678 (UDP only) as this is the Visible Invite and Start of A/V stuff
    Incoming ports are then 5060 (if iChat 3) then the group (16384-16403 for iChat 3) 16393-16402 (Smaller group but inside the iChat 3 ones)
    Text Chatting in AIM is on port 5190 TCP by default in iChat versions prior to 6 as is the Login.
    If you Change the Login port (to 443) then the Text chat moves
    File Sharing on AIM needs port 5190 on UDP
    I would tend to heave the Login Port trigger the File Sharing port.
    As you can set up the Jabber one the way you have I would not alter it.
    As already stated I am not seeing this here in the UK  (I get pushed to a UK Yahoo Server)
    I am also using UPnP in my router.
    10:15 PM      Monday; January 9, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Mi424 wr rev I keeps disconnecting slingbox 350 after 48-55 hrs

    mi424 wr rev I keeps disconnecting slingbox 350 after 48-55 hrs. If I unplug the ethernet cable from the LAN port on the router it will work again only temporarily. I can't access the slingbox from outside the LAN. I just says "connecting" and is being blocked by the router.yet it is working for a few days before disconnecting. Help?

    ddvoro wrote:
    ok i set the lease type to static on the slingbox. why does it say that the lease type will expire in 1439 minutes? Also the andriod phone shows up on the "my network" screen on the router. Does that need to be assigned a static lease also? I need for the router to allow the andriod phone to have acess outide the LAN when i am using wifi or 4g data when away from my home.
    Because its PSEUDO static.  Actual static requires purchase of static addresses from your provider (i.e. Verizon) and is usually only used by businesses.

Maybe you are looking for

  • Flash 11.7.700.169: "Adobe Flash Player 11.7 r700 has stopped working"

    Okay, I posted this already, and have had no one help me. I posted this 2 days ago!!! Original post: http://forums.adobe.com/message/5314268#5314268 Please. If I'm missing something, let me know. If there's help, where is it? Where's Adobe's prompt h

  • UTF-8 characters not displaying in IE6

    Dear Sirs, I have an issue in displaying UTF-8 characters in Internet explorer 6. I set up my all jsp pages encoding as UTF-8. Any language characters(like chinese,tamil etc) perfectly dispaying in firebox browser. But in internet explorer, the chara

  • Component vs HDMI

    Which is better? Component vs HDMI?

  • How do I fix this iTunes issue???

    I store all my media on an external drive that I have networked.  I have gotten rid of the local copy iTunes keeps on my macbook because it was taking up too much space.  Now I'm trying to put everything back into iTunes from it's network location an

  • Content viewer

    Is Adobe Content Viewer included in  Creative cloud membership?