My Seagate 80GB EHD is shown in Finder Mac External Drive but it will allow action to Verify or Repair. If there any hope to fix with software like Paragon NTFS?

My Seagate EHD seems to have died long ago even though it was spinning, the LED was on and I thought everything was backing up automatically. Working by phone with an Apple CTU Advisor 03/15/2015 to correct iCloud Keychain Security Code prompts, we determined there is reason to suspect the Seagate EHD failed way back whenever. Before I give up on the Seagate I'd like to check and use all resources and advice of others. With guidance from Seagate Tech Support I ran their diagnostics procedure which failed at the Verify step. I presume the EHD cannot work and will probably have to replace it. Can anyone out there in A. C. help?

Are there files on the drive that you're hoping to recover? If so give DataRescue a try http://www.prosofteng.com/datarescue4/
it has a free demo you can try to see if there are recoverable files and if there are you then need to pay for the full version if your files are worth it. If you're not worried about files throw it away 80GB isn't worth fooling with.

Similar Messages

  • Apple physically replaced the HD on my Imac.  I backed up everything on a Seagate Go Flex Desk for Mac external drive for Mac.  I went through the motions to restore my Iphoto Library back to my computer. Can't find them!!!!!

    Apple replaced my hard drive on my Imac.  I'm lucky I backed up everything on a Seagate Go Flex Desk for Mac external drive via Time Machine .  I followed directions in order to restore my iphoto library , but I can't seem to find it on my computer.  Are the files locked?

    No reason to assume they are locked. The library will be restored to the location it was backed up from, unless you specified somewhere else. Have you looked in your Pictures Folder?

  • My mac mini won't back up to my Seagate external drive but can read the information on it. Can i back up to it at all?

    My mac mini won't back up to my Seagate external drive but can read the information on it.
    Can i back up to it at all? and how do i do it?
    Simon

    I suspect the Seagate is not formatted to be used with the Mac. The correct format would be Mac OS Extended (Journaled), if you just bought the EHD then almost certainly it's formatted to be used with MS Windows machines. This is easy to fix, here are instructions on how to format it:
    http://pondini.org/OSX/DU1.html
    After formatting Time Machine http://support.apple.com/kb/ht1427 will launch and will begin backing up. The first backup will take some time however after the first backup it will go pretty quickly.
    NOTE!!!!!!!!!!!!!!! After formatting all data will be erased, so please if you have data on that move it to the internal HD first and then format. Then once you have backed up you will have a backup copy of the data. Also NEVER EVER use a backup disk to be used to store data. The reason being is if that drive crashes you have not only lost the data you have lost it's backup!!!!!!!!!!!!!!!

  • Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

    Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

    If you made backups of all of your photos and your catalog file using some third-party method (i.e. not using the PSE catalog backup command), then you should be able to restore everything.
    Step 1. Put the photos in the EXACT SAME LOCATION as before. For example, if they were in subfolders of C:\Users\<username>\Documents, then they must go into the exact same subfolders of C:\Users\<username>\Documents.
    Step 2. Move the catalog file to wherever you want it to be, and then double-click on it.

  • HT4889 Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive, it is constantly saying that it is "looking for other computers". It doesn't find the external drive. Why is it looking for other computers?

    I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?

    Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
    Thanks for the quick reply!

  • I am trying to export photos and keep receiving an error message. I tried relocating my catalog to see if that would help since I am saving to an external drive, but now I can't find my catalog at all either.

    I am trying to export photos and keep receiving an error message. I tried relocating my catalog to see if that would help since I am saving to an external drive, but now I can't find my catalog at all either. I am a newbie at this and don't know what I'm doing wrong or if I can even use an external drive for my photos and catalogs (I did enable smart previews so I do know how to do that part). Help!

    You can use an external drive with LR but I recommend only using it for
    image file storage while keeping your catalog on your internal HD for
    performance. If you moved files outside of LR (Finder or Explorer) you will
    have to clue LR in on where they are now. Use the left-hand folder panel in
    Library mode to navigate to the location on your external drive and use the
    find photo option get LR to reconnect them. If you moved the catalog and
    now LR can't find it you should get a window allowing you to select a new
    one where you can navigate to the new location and select it. You can also
    just start LR by clicking on the Lightroom 5 catalog.lrcat file to open it
    and start LR.

  • I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable on that is 2TB or a third party software that is compatable with the need I describe?

    I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable one that is 2TB or a third party software that is compatable with the need I describe?

    How much of a hurry are you in, and are you considering upgrading to Lion?
    File Vault on Snow Leopard only encrypts home folders you select, and doesn't work well with Time Machine.
    But Lion will have "full disk encryption" of local or external disks.  See File Vault 2 here: http://www.apple.com/macosx/whats-new/features.html

  • Migration cant find my external drive

    I can USB connect my external drive that I ran time machine backups on before I repleaced the hard drive.  I've now installed Mountain Lion and I am trying to utilize migration assistant to reload apps and files but it just spins like it can't find my external drive.  I can use finder and see the files on my external drive, why can migration assistant find it?

    Howdy all,
    This may be a resolution to the issue here…it worked for me, so I am sharing in case this works for others.
    In trying to migrate my older MacBookPro to a new MacBookPro, I was having the same issue that many folks are having where the Migration Assistant doesn’t see the external USB drive with my Time Machine backup. After reading through the posts by a user, Pondini, I discovered that I had the “bug” that was causing my automatic backups to exclude the Applications, System and Library folders. For those of you not familiar with this “bug”, it is described by user Pondini here: http://pondini.org/TM/D10.html. I performed the following steps which seemed to resolve the backup issue and subsequently allowed the Migration Assistant to “see” my external USB backup drive and perform the data migration:
    1. I performed the “Full Reset of Time Machine” as described by user “Pondini” here: http://pondini.org/TM/A4.html. I first deleted the file: /Library/Preferences/com.apple.TimeMachine.plist. NOTE: I DID NOT IMMEDIATELY PERFORM A NEW TIME MACHINE BACKUP AT THIS POINT…I did the next steps first.
    2. I quit ALL applications - including any that might be running in the background…like Intego’s Virus Barrier software that continuously runs “Real-Time Scanning” of my system. I believe that the Virus Barrier software was interfering with the Time Machine backup process and causing the Applications, System and Library folders to somehow be excluded from my backups. However, I cannot say this definitively. But turning off Virus Barrier seemed to solve the issue for me. Is anyone else with this issue running Intego’s Virus Barrier? Or perhaps something similar in the background?
    3. Next, I did a fresh Time Machine backup selecting the same external USB drive I had been using. When this subsequent backup was complete, the Application, System and Library folders were there.
    4. I turned on my new MacBookPro (running Mavericks), and started the Migration Assistant application. DO NOT PLUG IN THE EXTERNAL DRIVE YET. I selected the option to migrate from an existing Time Machine backup. Once at the screen with the spinning grey wheel that says: “Looking for sources…”, THEN I plugged in the external USB drive, turned it on and it was immediately discovered. I hit “Continue” and it transferred everything to the new MacBookPro as it was supposed to.
    5. I have run subsequent Time Machine backups from my new MacBookPro running Mavericks and have not seen the exclusion issue reoccur, but I’ll keep an eye on it.
    Hope this helps. Thanks to all for their input on this issue…especially user “Pondoni” - who I understand passed away before this issue was resolved.

  • Can't find my external drives in Lion.  Where did they go in Finder when I upgraded?

    Can't find my external drives in Lion.  Where did they go in Finder when I upgraded?

    Check the settings in the General and Sidebar tabs of the FInder's preferences.
    (66775)

  • I want to copy my iPhoto library to an external drive but I cannot find the folder on my Mac Air. When I open Finder there is no Picture folder showing so I cannot find the iPhoto library.

    I want to copy my iPhoto library to an external drive but I cannot find the folder on my Mac Air. When I open Finder there is no Picture folder showing so I cannot find the iPhoto library.

    Choose Go to Folder from the Finder's Go menu and provide ~/Pictures/ as the path. If that doesn't work, control-click a photo in iPhoto, show it in the Finder, and Command-click the folder's name in the window's title bar to find the path.
    (112151)

  • My GoFlexPro for Mac external drive will not work and freeze Finder after I switched to Mountain Lion. Anyone same trouble?

    My GoFlexPro for Mac external drive will not work and freezes Finder after I switched to Mountain Lion. Anyone same trouble?

    Search this site for many reports of problems with GoFlex drives.

  • Error -10810 after trying to relaunch finder. External drive may be problem.

    I bought a 3TB Seagate external drive a couple months ago and ever since then after a day or so of use, any application on the drive would stop working and the drive would become unresponsive. Ejecting it safely is impossible and if I try to open the drive in Finder, Finder becomes unresponsive and relaunching it gives the message "Finder cannot be opened -10180".
    Pulling the USB cord that connects the external drive gets Finder back up, but it of course damages my hard drive. I've been dealing with this for months by holding the power button every time this happens and forcing the mac to shut down. When I start it up again everything works fine for the time being but I'm at my wits end with this problem now.

    Don't know what else to suggest. The problem is with your external drive, either the file structure or the drive itself. How are you formatting exFAT? If using your Mac, try formatting using a PC.

  • My macbook pro can't find my external drive after upgrading os

    I have a macbook pro from 2009. I recently upgraded to Yosemite and now it won't read my external drive (Toshiba). I am able to find it in disk utility but I am not able to open it. The device works fine in other computers. I have all my pictures there. How can I fix this problem?

    Have you tried following through the trouble shooting tips in this knowledge base article on Firewire?

  • Itunes accesses files on external drive but not showing in finder

    I'm running OS  10.6.8. I have an external NTFS drive that I read and wirte to using NTFS mounter. I have files that iTunes show are in a folder on the external drive. iTunes will even play the songs. When I navigate to that folder in Finder there are no files displayed. I connected the drive to a PC and navigated to the folder. Windows says the file (folder) is corrupt. How is it possible that iTunes can read the files? How can I get read & write access to my files?

    You'll have to try to repair the drive on a PC.
    How is it possible that iTunes can read the files?
    Some things will still be readable when corruption occurs, the big problem is when writing occurs when there's corruption.

  • Seagate FreeAgent Go is making a clicking sound and the light is rapidly blinking. My Macbook is no longer recognizing it. Is there any way to fix it or recover my files? The SeaAgent is less than a month old!

    Seagate FreeAgent Go is making a clicking sound and the light is rapidly blinking. My Macbook is no longer recognizing it. Is there any way to pull all the songs I have saved on it? The SeaAgent is less than a month old!
    Does anyone know how to fix this issue?
    Or at least recover the lost data?
    Thanks!

    How to fix: the drive is in warranty, so contact Seagate for a replacement.
    How to recover your data: Do you have backups? (If not, you really, really, should.)
    You can try downloading Data Rescue, which will run in trial mode and let you know if the data is recoverable. (You can then choose to purchase the full version if it works for you.) A clicking drive, though, is usually (though not always) a sign that the drive cannot be recovered.
    Matt
    Edit: fixed link.

Maybe you are looking for

  • Scanner not working HP Photosmart C4780

    I have OS X 10.9.5 and a HP Photosmart C4780 printer.  I'm trying to scan something to a pdf and I'm getting a black image.  When I scan an 8.5 x 11 size document as an image it only scans 1/4 of the document.  Please let me know if there is a driver

  • ITunes match, disappearing library

    HELP!  I'd like to know how to restore my library, before iTunes Match. I had almost 1000 songs in my library (some added from CD or albums), and now only the ones purchased through iTunes appear in the library.  All my playlists are gone, as well. 

  • Data miss match when download to Excel

    Hi gurus, I have a Requirement in My Report where i need to show '000' when column value is null,for this I written in column formula like case when "tablename"."columnname" is null then '000' else "tablename"."columnname" end in report it showing '0

  • IBot failure: status keeps status "Running"

    Dear all, We installed OBI EE and would like to trigger an iBot. The creation of the iBot is succesful, but in the Job Manager the status of the instances keeps pending on status "Running" and no e-mail is send out. The database tabels also contain t

  • PE 5 - Will I lose my catalogs if I uninstall/reinstall to fix an error?

    I'm getting the error message "User name , organization or serial number is missing or invalid"  (after I used the Norton Utilities Registry Cleaner).  After searching for a fix, it sounds like I have to uninstall and reinstall the software to restor