My Understanding of CRM 5.0

Hi Guys,
I have read on SAP service regarding the CRM 5.0 and this is my undesrstanding.
Can you Guys please correct me if I am wrong.
The 4.0 is more focussed on the Marketing  but the 5.0 is more focussed on SALES
Mobile SALEs is not fully supported with 5.0 thats what i undesrstood from going through the notes 877707, 910222, 925902
We are right now using the Mobile Sales in CRM 4.0 .I dont have good knowledge regardign the VB part of mobile Sales.
When I checked for the cousrses offered by SAP there are no courses for Mobile Sales in America.
Some of the mobile courses are offered in Europe but nothing in US and that looks strange.
any one has clues why there are no courses offered

Thanx guys!!! for ur reply. I have checked system VMC is working fine.
Now how will I come to know that SPE is working fine, since I haven't downloaded condition records into system.
Also when I look at middleware parameters, there are some parameters that need to be defined to run SCE. Also in basic settings in SPRO, we have to define RFC for dispatcher & SCE. Now as per notes no RFC needs to be defined for the same.
so shall I leave them as it is, & how to varify that SCE is also running fine, since again I haven't downloaded products from ECC.
Thanx in advance.
Cheers
Hits

Similar Messages

  • Help in understanding SAP CRM 6.0

    Hi
    I am new to SAP CRM and would appreciate someone sending me the documents or links or files or PDF for SAP CRM 6.0. (Base customisation/Marketing and Campaign mgt/Interaction center/Sales and others)
    Thanks in Advance.
    Bala

    hi
    try these links
    http://help.sap.com/saphelp_crm60/helpdata/en/b7/973642a0feb36be10000000a155106/frameset.htm
    http://help.sap.com/saphelp_crm60/helpdata/en/86/3af0840ccb4e8c97161f5514cfd88d/frameset.htm
    http://esoadocu.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/render.asp?packageid=DBBB6D8AA3B382F191E0000F20F64781&id=347DD31EB5AB4BC592BD8B29C0981A1B
    give me ur id i will send the document to you.
    best regards
    ashish

  • How to find table name for the fields from Standard Extractor in CRM system

    How to find table name of fields from the standard extractor in CRM system ?
    e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
    Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • SAP CRM multiple clients possible

    Hi,
    We have a NetWeaver  SAP CRM system (ABAP + JAVA) stack.
    We run an internet webshop application on the JAVA stack connected to CRM ABAP stack, client 010. The CRM ABAP stack connects to SAP ERP.
    Q1: Is it possible to add a new client 020 in the ABAP stack of the CRM system?
    Q2: I don't understand in CRM the connection between the JAVA and ABAP stack. If I add a new ABAP client 020, do I need to copy the JAVA stack/client also?
    Who can help me guiding in which direction I have to go?
    Note: We want to connect a non-SAP system to client 020.
    Overview:
    ERP ABAP (client 010)    --> CRM ABAP (client 010) --> CRM JAVA stack
    non-SAP (legacy system) --> CRM ABAP (client 020) --> CRM JAVA stack
    Q3: What are the problems (challenges) I can expect?

    Hi Rene,
    I think it is not supporting multiple clients. Wait for some additional replies.
    Regards,
    Ravindra

  • Sales Document Creation in CRM System

    Dear all,
    We are implementing CRM 5.0 and ECC 6.0 (IS-Retail) for our client. As per the Business Process Customer creation take's place in CRM, which uploads Customer Records into ECC system.
    Material Master (Article), Pricing Procedure and Condition Types are being maintained in ECC system only.
    Now the new requirement is to create Quotations in CRM system, in turn it has to upload into ECC system. We have to enable or maintain all article data, Pricing Data and Discounts in CRM system also.
    I don't know how could we exchange the Article Master Records (Material), Pricing Procedures and condition types between ECC system.
    I have expertise in CRM Marketing. by getting basic understanding of CRM and ECC data flow landscape, Middleware Settings and Object downloads, I have confidence to map the requirement into SAP successfully.
    I request you to educate me on this scenario, your help and suggestions will be highly appreciated.
    Thank you
    Raghu ram.

    Hi,
    i'm not quite sure about ECC retail, but for sure, as per CRM 5.0 and ECC 6, depending on your scenario, you may not need whole complete set of pricing, nor the condition tables to be maintained in CRM.
    you can use minimum pricing which is basic condition type PR00. once the quotation is saved in CRM, during the replication process, the pricing will be determined in the ERP and passed back to CRM. so when you look into CRM quotation document, you will be able to find all the condition types maintained in CRM.
    however, this scenario is not suitable if you require customer to review the pricing before saving the quotation, let say internet sales / e-commerce. then in that case you'll probably need to have complete set of pricing in CRM.
    hope this helps.

  • Add fields to rebate aggrement in CRM system

    hi ,
         i need to add some of fields to Rebate aggrement in the Tcode Crmd_order. For this the Business transcation type is <b>REBATE</b> . But when i go inside i don't find the <b>Rebate</b> transcation . Is there any alternative transcation type for the rebate aggrement .
    can u please him in finding out this issue?
    Regards,
    kiran kumar batchu.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • Launch CRM 7.0 from SAP Solution Manager

    We are buiding the BPH in SAP Solution Manager and would like to store the CRM Business Processes in it as well. Therefore we'll also store the TCodes under the "Transaction" Tab.
    Now, i understand that CRM 7.0 uses a web GUI for configuring TCodes. If we launch the TCode from SAP Solution Manager, does it launch a browser with the right IMG Object for the TCode? How does this work?
    Anyone offer any suggestions/thoughts?
    Thank you, in advance.

    Dear Ramesh,
    I'm pretty sure that it's possible to launch CRM web GUI components from Solution Manager. You can assign BSP Applications to process steps and launch them.
    Most of the configuration in CRM 7.0 is still done via SAP GUI. I think it's only the UI view configuration that can be done in web GUI. However, if you find out which BSP application it is, you should be able to assign it to process steps in the configuration tab. It's done in the same way like assigning TCodes; just use type BSP_APPLICATION instead of BMTA.
    Best regards
    Jens

  • ABAP & Workflow for CRM

    Hello  Buddies,
            I have seen so mail threads somewhat near to my doubt but could you please tell me some good link for learning ABAP & Workflow for CRM. Also please advise me, being ABAP-Workflow Consultant which section of CRM is best suitable for me.
    Thanks in advance. Your guidance is appreciated.
    Warm Regards,
    N. Singh

    Hi,
    ABAP    and Workflow for CRM is nothing different and specific to CRM. They are same and at least all the basic concepts are present. There might be some implementation and conceptual differences but they are more of functionality driven.
    You start learning SAP CRM Fucntionality which will help you to understand SAP CRM much better. And then you can have a feel of the CRM feature and where and how it's been used to drive the ABAP and Workflow functionality.
    Hope this helps. You can scan the forum for good links and resources.
    Best Regards,
    Samantak

  • To Know more about CRM

    Hello Friends,
    For the past four years i am an SEIBEL end user, One of my friend suggested me about doing an course in SAP, Already i am designing Business object for my team,
    Can u tell me how is the global opportunities for SAP CRM, and will my experience as a (SIEBEL and Business objects) end user will be considered as an experience.
    Kindly give a detail answer, I am very eager in doing CRM.
    Thanks & Regards
    Karthik

    Hi Karthik,
    I assume that its SEIBEL CRM experience.
    Now about SAP CRM then its indeed very very interesting module and there are many sub module and streams so one can always chose somehing of his choice in CRM and continue working. Being end user of any CRM system i always benifitial to understand the CRM business process.
    From your [ast experience i am sure you are well acquainted with CRM Business Processes and with SAP, you need to put your this business knowledge into SAP CRM Framework to map the processes. I am sure that wont be difficult at all.
    Regarding SAP CRM Market then its very good and with better appreciations year after year . Even in Recession there were the Jobs and Projects offering SAP CRM Positions everywhere.
    All the best.
    Regards,
    Suchita

  • CRM 4.0 and ITS

    My client is using CRM 4.0 with external ITS. I understand that CRM 4.0 has internal WAS so is it possible to get rid of external ITS and use Internal WAS/ITS. If Yes, how much effort would be required in doing the same.
    An early reply will be appreciated.
    Kurella

    Hello Kurella,
    SAP CRM 4.0 has SAP_BASIS 620 (SAP Basis component. it doen't have the "internal" ITS. You still must use the external ITS only.
    See this SAP Note for more information.
    [Note 829035 - Collective Note: Performance and Service News Integrated ITS|https://service.sap.com/sap/support/notes/829035]
    Easwar Ram
    http://www.parxlns.com

  • Crm online

    For online services(any information provided to a prospect/client) comment can be entered to a specific comments field. However changes in the comments are not tracked.
    A history (like for the comment field have to be available.
    Transaktion: xxxxxxxxx online services
    system xxx
    by creating online service, history is not available
    can anyone help me on this??
    regards,
    latha reddy.

    Hello,
    We have a CRM 2013 instance and planning to move to CRM 2015 online.
    Wanted to understand if CRM 2015 online is recommended only for LBI & MBI data or it's good for HBI data as well.
    Thanks
    Tarun
    Tarun

  • CRM Online Security with Data Classified as HBI

    I have an old CRM solution hosting on an CRM 4.0 On-Premise environment in a domain network. I am planning to migrate it to the latest CRM Online 2015. However, since the data is classified as HBI, does anyone know if CRM Online will encrypt all data in
    the cloud database? Does CRM Online has any security policy to allow us and secure to put the HBI data on the cloud? Thanks.

    Hello,
    We have a CRM 2013 instance and planning to move to CRM 2015 online.
    Wanted to understand if CRM 2015 online is recommended only for LBI & MBI data or it's good for HBI data as well.
    Thanks
    Tarun
    Tarun

  • Sending CRM survey templates to Mobile handheld using Mobile infrastructure

    Hi,
    I have a a requirement to send survey templates to handheld client using mobile infrastructure. Also the survey results have to be send from handheld client to CRM using the mobile infrastructure.
    Has anybody send CRM objects using mobile infratructure? Usually CRM middleware is used for sending and receiving data to mobile devices.
    But Mobile infrastucture is different from CRM middleware and use download modules to fill syncBO structures and then create XML files to send to handheld cleint. When it gets the XML results from client, it fills the syncBO from the xml and then call upload modules to send data to update backend (CRM or ERP ) objects.
    Please let me know if you have done similar development and if you faced any complexities to send CRM data using mobile infratructure.
    thanks
    Jay

    Hi
    I´m not technical consultant but I need to know whether is possible to sync data between CRM and  Symbol devices just using CRM Middleware or whether is necesary pass on MI platform to achieve that?
    it is a little confusing for me to understand if CRM middleware/CDB is also needed for a Mobile scenario where I have MI also,  or both are required.
    Could you clarify that for me, please?
    Thanks  for your help

  • CRM ABAP

    Hi Experts,
    I'm basically an ABAPer , want to switch to CRM technical side.
    Here my doubts is' Is CRM developments also same like ABAP developments?
    Please give me the reply with proper explainations and examples.
    Thanks ,
    Indra

    CRM Technical requirement is an strong experience in ABAP with strong O-Orientation.
    1) Exposure to BSP(MVC Paradigm)  programming (with Java Scripts and AJAX ).
    2)Web UI enhancements( not just UI config tool but lot of coding involved).
    3)Setting UP of Interactive reports in CRM.
    a) Should be able to program using BOL( used in reports, ALV, UI coding)
    b)Should understand GENIL components and GENIL classes.
    c)Every BUSINESS OBJECT has a corresponding API as the data is tranferred through API's to the corresponding tables.(BDC is not supported here.)
    4)ALE/IDOC configuration.
    5)Ablility to work with WEB SERVICES from ES-Repository
    6)Creation of webservices using WStool and be able to use them in the template designer.
    7)Shoul be at ease with the Transaction launcher.
    8)Not to mention having good understanding of CRM DATA model.
    If you are cofortable with this you are in.
    regards.

  • CRM Sales training Material

    Hi,
    Please help me understand for CRM Sales is the CR300 is latest training aterial or do we have ay other training material available.
    I need to understand latest training material available for CRM sales and Interaction Center
    Thanks
    Gurusaran

    Hi again,
    this is training material CR410 Interaction Center WebClient in CRM (Col92)
    Everything could be found on our service market place
    http://service.sap.com/trainingcontent
    Best regards
    Rene Markytan

Maybe you are looking for