/n/tmwflow/cmsconf

Hi,
In Transaction '/n/tmwflow/cmsconf' i am only getting two tabs
1)System Change Option &
2)Critical Objects.
I believe it should have someother tab like General Settings,Distribution Routes & Project structure.
Why its missing here.I am on Solution manager 4 with latest SP's.
Regards,
Cherry

Hi All,
Any solution for this error, I am also getting same error
I have activated Change request management, It refresh successfully, But when i create New Maintenance Cycle it gives 'Solution Manager and Change Request
Management are not consistent'.
SLG1 Error
1) Message no. /TMWFLOW/TASKLIST139
Diagnosis
The task list could not be created correctly. Other messages are in the Application Log, which you can reach as follows:
with the 'Messages about Changes' (next to the 'Display/Change...' radio button ) or 'Creation Messages' (next to the 'Create...' radio button) pushbutton, in the Maintenance Cycle and Projects tabs, in the Environment -> Scheduling menu, in the /TMWFLOW/CMSCONF transaction.
with the transaction SLG1, object /TMWFLOW/CMSCV
2) Message no. /TMWFLOW/TASKLIST145
Diagnosis
The settings in Change Request Management do not correspond to the settings in Solution Manager: The projects of the Change and Transport System (CTS projects) for the Solution Manager project TESTPJ are different.
System Response
The system does not allow you to complete the task list.
Procedure
Go to the central configuration tool of Change Request Management and synchronize the configuration.
3) I have checked the application log from /n/tmwflow/charmchk and found no error

Similar Messages

/TMWFLOW/CMSCONF error

Dear All
Upon executing transaction /TMWFLOW/CMSCONF, I am encountering the following error:
Runtime Errors         IMPORT_ALIGNMENT_MISMATCH
Except.                CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          10.11.2009 15:00:57
Short text
Error when importing object "GS_SYST".
What happened?
Error in the ABAP Application Program
The current ABAP program "/TMWFLOW/SAPLCONFIG_SERVICES" had to be terminated
      because it has
come across a statement that unfortunately cannot be executed.
Can somebody help me out ??
Regards
Bilal Nazir

Is nobody aware of this error ???
Here is the error analysis !
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "/TMWFLOW/ONE_SYSTEM_CHANGE_GET" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "GS_SYST", the structure did not match the
structure of the target object. The error occurred in component
no. 55.

Systems missing in /TMWFLOW/CMSCONF

Hi Experts,
We have configured ChaRM in solution manager for several landscapes(PI,BI,CRM,SRM..etc). We now want to activate CSOL and unable to see few systems in /TMWFLOW/CMSCONF.
Example my PI Landscape is :T11, A11, P11. i am able to see T11 but not A11 and P11. similar is heh case with BI landscape too.if anybody has encountered this issue and has solution, please help
Appreciate your quick help
Anand

Hi,
You missed some more config steps, pls follow the christian guidlelines as stated below
[Specifying Critical Transport Objects under Change Management Extend config|Specifying Critical Transport Objects under Change Management Extend config]
[No system listed in /TMWFLOW/CMSCONFIG|No system listed in /TMWFLOW/CMSCONFIG]
let us knw once you checked.
Jansi

Tab missing in Transaction /n/TMWFLOW/CMSCONF

We have upgraded our SMR 3.2 to SMR 4.0, in SMR 3.2 i can able to see the tab named "Distribution Routes" using /TMWFLOW/CMSCONF transaction.when i used the same t-code SMR 4.0 , i can only able to see System Change Options and Critical objects,Other tabs are not in visible mode ??? how can we retrive the same tab . or else is there any other t-code for Distribution routes ???? guide me ..
im struck up while following the SPRO settings in ChaRM.Send me is there any step by step weblogs are available ???

Hi Prakash,
If you are trying to create project cycles with /TMWFLOW/CMSCONF-> Distribution Routes-> Project environment, go to SOLAR_PROJECT_ADMIN -> System landscape-> Project cycles. With Release 4.0, some functions that existed in 3.20 outside of the original tools of the Solution Manager have been reintroduced.
If you need to go to Transport Domains and to navigate to TMS system configuration, go to Transaction SMSY-> Environment -> Domain Controller Overview.
If you need this tab for other function, let us know.
Regards,
Raquel Cunha.

No systems found in /tmwflow/cmsconf

Hi,
I have included a 4 system landscape DEV -> QAS -> PPR -> PRD in my Maintenance project. Activated Change request Management.
Created Maitenance Cycle.
CTS was configured successfuly.
I could see all green messages in /tmwflow/charmchk
Created Trusted RFCs as well.
But I could not see my system under System Change Options in /tmwflow/cmsconf. Contradicting this, I could see my system under Critical Objects in /tmwflow/cmsconf.
Really wondering what am I missing.
Any pointings will definitely be rewared. Please help.
--Ragu

Hi,
maybe a job is missing.
Try report /TMWFLOW/CONFIG_BATCH_GET to fix this manually or schedule job /TMWFLOW/CONFIG_BATCH_GET
see: http://help.sap.com/saphelp_sm40/helpdata/EN/d1/489ba9e6a94a508aee01797d06f912/frameset.htm
regards
Andy

Transaction /n/TMWFLOW/CMSCONF

Hello!
If I execute the Tcode /n/TMWFLOW/CMSCONF I can see the projects created in tcode "SOLAR_PROJECT_ADMIN" but there are red.
Is there some activation steps to do it?
Other issue:
I have SOLMAN 4.0 and can see only two tabs, but not the tabs like "Distribution routes", etc.
Are these tabs only by SOLMAN 3.2?
<b>Is there some configuration guide or .sim-file describing the usage of Change Request Management?</b>
Thank you!
regards

Hey Thom,
Issue 1).
In SOLAR_PROJ_ADMIN, the reason you get those red icons because settings which are maintained are not as recemmended by SAP,
For e.g
if you define a Production sytem in your project landscape, then Cross-client changes are NOT permitted, however its permitted if it were a Development system.
Just click on the red icon and then on your right, you will see the tab where you get know what went wrong and correct it if neccssary.
Issue 2)
With Solman 4.0 distribution routes tabs are not present.
There are *.sim files and configuration available for Change request management in sap marketplace, but they are valid only for SOLMAN 3.2.
This is where you get them.
<a href="https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&">https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&</a>
Just click on Techincal or functional roles on your right and there you get everthing.
For SOLMAN 4.0, there are no config guide or SIM files available yet.
Please Reward for usefull post and close this thread if your problem is solved
Regards,
Anand.

Re: /n/tmwflow/cmsconf - how to find tcode central configuration

Hi gurus,
Iam configuring the ChaRM for this i have done the IMG,TMS all the activities but i can t find the systems in the /tmwflow/cmsconf transaction. The distribution button and the sceduling button are hided ,how to enable it !
solutions awarded for sure!
regards,
esr kumar

Hey Thom,
Issue 1).
In SOLAR_PROJ_ADMIN, the reason you get those red icons because settings which are maintained are not as recemmended by SAP,
For e.g
if you define a Production sytem in your project landscape, then Cross-client changes are NOT permitted, however its permitted if it were a Development system.
Just click on the red icon and then on your right, you will see the tab where you get know what went wrong and correct it if neccssary.
Issue 2)
With Solman 4.0 distribution routes tabs are not present.
There are *.sim files and configuration available for Change request management in sap marketplace, but they are valid only for SOLMAN 3.2.
This is where you get them.
<a href="https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&">https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&</a>
Just click on Techincal or functional roles on your right and there you get everthing.
For SOLMAN 4.0, there are no config guide or SIM files available yet.
Please Reward for usefull post and close this thread if your problem is solved
Regards,
Anand.

Re:/tmwflow/cmsconf transaction - scheduling and distribution routes hided

Hi gurus,
Iam configuring the ChaRM for this i have done the IMG,TMS all the activities but i can t find the systems in the /tmwflow/cmsconf transaction. The distribution button and the sceduling button are hided ,how to enable it !
solutions awarded for sure!
regards,
esr kumar

Hi,
Please kindly ensure that the IMG has been configured correctly especially in the perspective for ChaRM;
SAP Solution Manager
- Advanced Configuration
   -Scenario-Specific Settings
     -Change Request Management
       -Standard Configuration
         -Transport Management System
Extended Configuration is for the purpose, if you need to specify
Critical Transport Objects, or Reproting Service. But before coming to
this part, the standard configuration has to be completed and working.
Hope this helps.
Cheers
SH

/n/TMWFLOW/CMSCONF lists no systems

Hi,
I have configured STMS and other CHARM related activities.
When I execute above tcode, no system is listed for CSOL.
solman7.1SP04
per your experience, what is missing?
Thanks a lot!

Hi,
Try to execute report /TMWFLOW/CONFIG_BATCH_GET in se38 and check if you get list of systems in /n/TMWFLOW/CMSCONF .
Regards,
Archana

/tmwflow/cmsconf

We are implementig ChaRM and we have the following situation:
Some domain control are configured in production systems and other in
development systems.
Only the systems that are domain control in development system appear
correctly in /tmwflow/cmsconf transaction and is possible set up
"project assignment" to mandatory. When the domain control is in the
production system is not possible set up this. In change Attribute
definition screen, only productions clients appears.
When we change the domain control to development system, this problem
doesn't occurs.
Is mandatory that domain control to be in development systems? I have
system that is better domain control in production system.

Hi,
Do you have a domain link between SOLMAN domain contoller with the other domain controllers?
What does /TMWFLOW/CHARMCHK say?
Feel free to revert back.
--Ragu

/TMWFLOW/CMSCONF - Unable to see overview of systems

Hi
I am unable to see an overview of systems at /TMWFLOW/CMSCONF.
I have configured the system landscape at SMSY. I have 3 clients in the landscape which I use as DEV, QA and PRD.
At SOLAR_PROJET_ADMIN, I have added these components to teh landscape.
However I am unable to see any "Change Request Management" relevant tabs in the "System landscape" tab here (as some posts in this forum suggest).
Are these two issue related?
Regards
SN

Hi
Yes I have created the project as "Internal Maintenance Project".
The problems that I see are:
1. I do not see any "Project Cycle" tab in System Landscape tab at SOLAR_PROJECT_ADMIN.
2. At SOLAR_PROJECT_ADMIN-> System Landscape-> Systems: When I check the System Landscape, It says: Logical component ZECCis not used in Project ZPRJ. (However it shows a green light.) At SMSY however I see the project ZPRJ and the logical component assigned to the project with all its systems.
3. /TMWFLOW/CMSCONF is not showing any projects/components. For projects to show up at this transaction I think there are some settings tht I have missed.
Can anyone walk me through the steps that I need to have done in SMSY, DSWP, Transport management etc that can help me see what I have missed? I must have missed some configuration?
Is there any Configuration in SPRO to be done?
Regards
SN

Error in background job for program RSGET_SMSY error message No active job

Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
Thom

Thank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards

Error while makingProject assignment Mandatory

Hi ,
In /tmwflow/cmsconf, When i try to make the project assignment mandatory, i am getting teh belwo Error. Can anyone help in fixing this issue.
System cancel RFC destination SM_<SID>CLNT000_TRUSTED, Call TMW_CHANGE_PROJECT_SETTING: Screen output without connection to user.
I have wide authorization in solman and Trusted authorization also in satellite system
Anand

Hi,
I Still guess it could be missing authorization. check for s_rfc and s_rfcacl objects for that user.
Check these links.
Re: "Screen output without connection to user"
http://www.sapnet.ru/abap_docu/ABENRFC_SYS_FAIL.htm
This should help.
Feel free to revert back.
-=-Ragu

Change Management. Cannot go to the next phase ... And common questions.

Hi dear colleagues!
Here there are some unpleasant problems which has arisen during Change Management functions realization...
1. After approving of Urgent Correction by so-called "Change Manager", "developer" couldn't set it status "in development" -> and begin corrections in DEV system. It outputs in status bar: "NO ACTIONS IN THE WORK LIST".
2. How should i link some urgent correction (or simply Service Message) to a specific Maintenance Cycle?
The same problem I cannot go to the next phase, system outputs that "No Maintenance Cycle is open for the current system".
3. And please can u explain in a simple words: Should i always make a maintenance project for using "Change Management" functions?
4. Can we use "Change Management" for 4.0C (vers. of satellite) systems?
Any help and tips would really appreciate.
Best regards,
Vladimir

Hi,
For configuring change management, you will have to follow the SPRO guidelines for setting up transport routes between satellite systems.
Well i list down the activities that you need to do. Details you can find in SPRO -- > SAP Solution Manager --> Scenario Specific Settings --> Change Request Management --> Standard Configuration --> transport management System
1) Activate Extended transport control by setting System Parameter CTC=1 in STMS --> Systems
2)Create Client specific transport route between satellite systems
3) Ensure that all the systems in the domain have the same transport group.
4)Configure or activate Single transport Strategy in STMS --> Overview --> transport routes.
5)Activate TMS Trusted services in STMS --> Overview --> Systems --> Goto --> transport Domain --> Management Tab page --> Security option group box.
Besides these activities, you will have to execute the SPRO IMG Activity
SAP Solution Manager --> Basic Settings --> SAP Solution Manager System --> Activate Integration with Change Request Management
For activity Intigration Solution Manager make the following entry
APPL: Change Request Management
RFC Destination : NONE
For activity Integration Change Request Management
make the entries in table BCOS_CUST as g
iven in the IMG instruction.
Now in SOLAR_PROJECT_ADMIN you can activate a maintenance project for change management by going to System Landscape --> Project Cycle
Click the check box Activate Change request Management.
(NOTE: The above option comes only in Solution Manager 4.0, for SOLMAN 3.2 you can directly create maintenance cycle in /n/tmwflow/cmsconf --> Distribution Routes --> Project Landscape group box .)
Now you can create a maintenance cycle by clickin on the button Create Task List in project cycle tab page.
Navigate to task list and activate the tasklist (Maintenance Cycle) by clicking on the status button.
Now while creating change request ensure that you are assigning the correct ibase /component of the production system in the satellite system landscape. You have to enter the ibase component of the client of the production system to whcih the client specific transport route has been made. You can find this number in transaction IB52
Hope now u can move on with CHARM.

Problem in CHaRM Configuration - Solution Manager 4.0 SP16

Hi All,
We are in the process of configuring CHaRM in Solution Manager 4.0 with SP16. We have created the project and the activated CHaRM for that project and created the task list as well.
We are able to create the Change Request transaction and also approve the transaction successfully.
ISSUE
The popup of selecting a maintenance cycle while approving the Change Request is not appearing.
When we go to the document flow and select the next document it says
No maintenance cycle is open for the current system
Message no. SOCM_ACTION_LOG011
Maintenance Cycle is very much active when we check from transaction /tmwflow/cmsconf --> Environment --> Scheduling --> Display maintenance cycles.
We are not able to see any maintenance cycle from transaction code crm_dno_monitor
Any help would be highly appreciated.
Thanks and Regards
Siddarth

I have a question regarding the organization of Solutions in Solution Manager.
First, I have 3 solution manager boxes
1 Sandbox
2 Dev
3 Prod
In sandbox, I have a sandbox 'solution' that contains all sandboxes
In dev, I have no 'solution'
In production, I have all dev through production boxes lumped into one 'solution'.
I was thinking that maybe I should break up the solution in Production to have only prod boxes, and then build one in dev that contains dev and qa boxes.
My question is that when I configure CHARM to manager transports, will that work to separate DEV/QA from Prod OR will I need all the dev, qa, prod boxes in one 'solution' since that is how transports flow??

/n/tmwflow/cmsconf

Similar Messages

Maybe you are looking for