Transaction /n/TMWFLOW/CMSCONF

Hello!
If I execute the Tcode /n/TMWFLOW/CMSCONF I can see the projects created in tcode "SOLAR_PROJECT_ADMIN" but there are red.
Is there some activation steps to do it?
Other issue:
I have SOLMAN 4.0 and can see only two tabs, but not the tabs like "Distribution routes", etc.
Are these tabs only by SOLMAN 3.2?
<b>Is there some configuration guide or .sim-file describing the usage of Change Request Management?</b>
Thank you!
regards

Hey Thom,
Issue 1).
In SOLAR_PROJ_ADMIN, the reason you get those red icons because settings which are maintained are not as recemmended by SAP,
For e.g
if you define a Production sytem in your project landscape, then Cross-client changes are NOT permitted, however its permitted if it were a Development system.
Just click on the red icon and then on your right, you will see the tab where you get know what went wrong and correct it if neccssary.
Issue 2)
With Solman 4.0 distribution routes tabs are not present.
There are *.sim files and configuration available for Change request management in sap marketplace, but they are valid only for SOLMAN 3.2.
This is where you get them.
<a href="https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&">https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&</a>
Just click on Techincal or functional roles on your right and there you get everthing.
For SOLMAN 4.0, there are no config guide or SIM files available yet.
Please Reward for usefull post and close this thread if your problem is solved
Regards,
Anand.

Similar Messages

Tab missing in Transaction /n/TMWFLOW/CMSCONF

We have upgraded our SMR 3.2 to SMR 4.0, in SMR 3.2 i can able to see the tab named "Distribution Routes" using /TMWFLOW/CMSCONF transaction.when i used the same t-code SMR 4.0 , i can only able to see System Change Options and Critical objects,Other tabs are not in visible mode ??? how can we retrive the same tab . or else is there any other t-code for Distribution routes ???? guide me ..
im struck up while following the SPRO settings in ChaRM.Send me is there any step by step weblogs are available ???

Hi Prakash,
If you are trying to create project cycles with /TMWFLOW/CMSCONF-> Distribution Routes-> Project environment, go to SOLAR_PROJECT_ADMIN -> System landscape-> Project cycles. With Release 4.0, some functions that existed in 3.20 outside of the original tools of the Solution Manager have been reintroduced.
If you need to go to Transport Domains and to navigate to TMS system configuration, go to Transaction SMSY-> Environment -> Domain Controller Overview.
If you need this tab for other function, let us know.
Regards,
Raquel Cunha.

/n/tmwflow/cmsconf

Hi,
In Transaction '/n/tmwflow/cmsconf' i am only getting two tabs
1)System Change Option &
2)Critical Objects.
I believe it should have someother tab like General Settings,Distribution Routes & Project structure.
Why its missing here.I am on Solution manager 4 with latest SP's.
Regards,
Cherry

Hi All,
Any solution for this error, I am also getting same error
I have activated Change request management, It refresh successfully, But when i create New Maintenance Cycle it gives 'Solution Manager and Change Request
Management are not consistent'.
SLG1 Error
1) Message no. /TMWFLOW/TASKLIST139
Diagnosis
The task list could not be created correctly. Other messages are in the Application Log, which you can reach as follows:
with the 'Messages about Changes' (next to the 'Display/Change...' radio button ) or 'Creation Messages' (next to the 'Create...' radio button) pushbutton, in the Maintenance Cycle and Projects tabs, in the Environment -> Scheduling menu, in the /TMWFLOW/CMSCONF transaction.
with the transaction SLG1, object /TMWFLOW/CMSCV
2) Message no. /TMWFLOW/TASKLIST145
Diagnosis
The settings in Change Request Management do not correspond to the settings in Solution Manager: The projects of the Change and Transport System (CTS projects) for the Solution Manager project TESTPJ are different.
System Response
The system does not allow you to complete the task list.
Procedure
Go to the central configuration tool of Change Request Management and synchronize the configuration.
3) I have checked the application log from /n/tmwflow/charmchk and found no error

Re:/tmwflow/cmsconf transaction - scheduling and distribution routes hided

Hi gurus,
Iam configuring the ChaRM for this i have done the IMG,TMS all the activities but i can t find the systems in the /tmwflow/cmsconf transaction. The distribution button and the sceduling button are hided ,how to enable it !
solutions awarded for sure!
regards,
esr kumar

Hi,
Please kindly ensure that the IMG has been configured correctly especially in the perspective for ChaRM;
SAP Solution Manager
- Advanced Configuration
   -Scenario-Specific Settings
     -Change Request Management
       -Standard Configuration
         -Transport Management System
Extended Configuration is for the purpose, if you need to specify
Critical Transport Objects, or Reproting Service. But before coming to
this part, the standard configuration has to be completed and working.
Hope this helps.
Cheers
SH

/TMWFLOW/CMSCONF error

Dear All
Upon executing transaction /TMWFLOW/CMSCONF, I am encountering the following error:
Runtime Errors         IMPORT_ALIGNMENT_MISMATCH
Except.                CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          10.11.2009 15:00:57
Short text
Error when importing object "GS_SYST".
What happened?
Error in the ABAP Application Program
The current ABAP program "/TMWFLOW/SAPLCONFIG_SERVICES" had to be terminated
      because it has
come across a statement that unfortunately cannot be executed.
Can somebody help me out ??
Regards
Bilal Nazir

Is nobody aware of this error ???
Here is the error analysis !
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "/TMWFLOW/ONE_SYSTEM_CHANGE_GET" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "GS_SYST", the structure did not match the
structure of the target object. The error occurred in component
no. 55.

Re: /n/tmwflow/cmsconf - how to find tcode central configuration

Hi gurus,
Iam configuring the ChaRM for this i have done the IMG,TMS all the activities but i can t find the systems in the /tmwflow/cmsconf transaction. The distribution button and the sceduling button are hided ,how to enable it !
solutions awarded for sure!
regards,
esr kumar

Hey Thom,
Issue 1).
In SOLAR_PROJ_ADMIN, the reason you get those red icons because settings which are maintained are not as recemmended by SAP,
For e.g
if you define a Production sytem in your project landscape, then Cross-client changes are NOT permitted, however its permitted if it were a Development system.
Just click on the red icon and then on your right, you will see the tab where you get know what went wrong and correct it if neccssary.
Issue 2)
With Solman 4.0 distribution routes tabs are not present.
There are *.sim files and configuration available for Change request management in sap marketplace, but they are valid only for SOLMAN 3.2.
This is where you get them.
<a href="https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&">https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&</a>
Just click on Techincal or functional roles on your right and there you get everthing.
For SOLMAN 4.0, there are no config guide or SIM files available yet.
Please Reward for usefull post and close this thread if your problem is solved
Regards,
Anand.

/tmwflow/cmsconf

We are implementig ChaRM and we have the following situation:
Some domain control are configured in production systems and other in
development systems.
Only the systems that are domain control in development system appear
correctly in /tmwflow/cmsconf transaction and is possible set up
"project assignment" to mandatory. When the domain control is in the
production system is not possible set up this. In change Attribute
definition screen, only productions clients appears.
When we change the domain control to development system, this problem
doesn't occurs.
Is mandatory that domain control to be in development systems? I have
system that is better domain control in production system.

Hi,
Do you have a domain link between SOLMAN domain contoller with the other domain controllers?
What does /TMWFLOW/CHARMCHK say?
Feel free to revert back.
--Ragu

/TMWFLOW/CMSCONF - Unable to see overview of systems

Hi
I am unable to see an overview of systems at /TMWFLOW/CMSCONF.
I have configured the system landscape at SMSY. I have 3 clients in the landscape which I use as DEV, QA and PRD.
At SOLAR_PROJET_ADMIN, I have added these components to teh landscape.
However I am unable to see any "Change Request Management" relevant tabs in the "System landscape" tab here (as some posts in this forum suggest).
Are these two issue related?
Regards
SN

Hi
Yes I have created the project as "Internal Maintenance Project".
The problems that I see are:
1. I do not see any "Project Cycle" tab in System Landscape tab at SOLAR_PROJECT_ADMIN.
2. At SOLAR_PROJECT_ADMIN-> System Landscape-> Systems: When I check the System Landscape, It says: Logical component ZECCis not used in Project ZPRJ. (However it shows a green light.) At SMSY however I see the project ZPRJ and the logical component assigned to the project with all its systems.
3. /TMWFLOW/CMSCONF is not showing any projects/components. For projects to show up at this transaction I think there are some settings tht I have missed.
Can anyone walk me through the steps that I need to have done in SMSY, DSWP, Transport management etc that can help me see what I have missed? I must have missed some configuration?
Is there any Configuration in SPRO to be done?
Regards
SN

Systems missing in /TMWFLOW/CMSCONF

Hi Experts,
We have configured ChaRM in solution manager for several landscapes(PI,BI,CRM,SRM..etc). We now want to activate CSOL and unable to see few systems in /TMWFLOW/CMSCONF.
Example my PI Landscape is :T11, A11, P11. i am able to see T11 but not A11 and P11. similar is heh case with BI landscape too.if anybody has encountered this issue and has solution, please help
Appreciate your quick help
Anand

Hi,
You missed some more config steps, pls follow the christian guidlelines as stated below
[Specifying Critical Transport Objects under Change Management Extend config|Specifying Critical Transport Objects under Change Management Extend config]
[No system listed in /TMWFLOW/CMSCONFIG|No system listed in /TMWFLOW/CMSCONFIG]
let us knw once you checked.
Jansi

No systems found in /tmwflow/cmsconf

Hi,
I have included a 4 system landscape DEV -> QAS -> PPR -> PRD in my Maintenance project. Activated Change request Management.
Created Maitenance Cycle.
CTS was configured successfuly.
I could see all green messages in /tmwflow/charmchk
Created Trusted RFCs as well.
But I could not see my system under System Change Options in /tmwflow/cmsconf. Contradicting this, I could see my system under Critical Objects in /tmwflow/cmsconf.
Really wondering what am I missing.
Any pointings will definitely be rewared. Please help.
--Ragu

Hi,
maybe a job is missing.
Try report /TMWFLOW/CONFIG_BATCH_GET to fix this manually or schedule job /TMWFLOW/CONFIG_BATCH_GET
see: http://help.sap.com/saphelp_sm40/helpdata/EN/d1/489ba9e6a94a508aee01797d06f912/frameset.htm
regards
Andy

/n/TMWFLOW/CMSCONF lists no systems

Hi,
I have configured STMS and other CHARM related activities.
When I execute above tcode, no system is listed for CSOL.
solman7.1SP04
per your experience, what is missing?
Thanks a lot!

Hi,
Try to execute report /TMWFLOW/CONFIG_BATCH_GET in se38 and check if you get list of systems in /n/TMWFLOW/CMSCONF .
Regards,
Archana

Specifying Critical Transport Objects under Change Management Extend config

I'm trying to configure Change Management and I am in SPRO under SAP Solution Manager -> Config -> Scenario-specific settings -> Change Managment-> Extended config -> Change Request Management -> Specify Critical Transport Objects.
It states that you need to select the system/clients for which you want to specify critical transport objects. however, i do not see my systems listed there. I'm assuming i've missed a prior step somehow.
Any help would be appreciated! Thank you!
Margo

Hi.
There are several things necessary to make the system appear in this transaction (/N/TMWFLOW/CMSCONF -> critical obejcts)
You need:
- a smi project
- a logical component assigned to that project which contains your systems
- at least one system within your logical component of type "developement system"
- the project needs to be released for change request management (tx: solar_project_admin, "activate change request management")
Hope this helps.
/cheers

ChaRm and CTS+ configuration

Hello Experts,
Can anyone forward ChaRm and CTS+ configuration document to me, I have received Business requirments and trying to configure the same. I would appreciate step by step configuration guide for both.
Thanks in advance.
Regards,
Swapnil Lakhe
lakhess<at>gmail

Hi,
Please find the below steps for Charm confirguration :
1.SAP Solution Manager Implementation Guide  SAP Solution Manager  Basic Settings  SAP Solution Manager System  Activate Integration with Change Request Management
Click on the Execute icon with the text Activate Integration with Change Request Management
Double click the Activate Change Request Management and set up client
It will show the following window type your Change Request Management Client Number
Click on the Integration Solution Manager
If you have different system for Change Request Management gives the RFC destination for that System.
Click back button
Double click on the Integration Change Request Management
You have to maintain the following data here
Column 1: Application: CHARM
Column 2: + : W
Column 3: RFC Destination: NONE
Column 4: + : CUST620
Column 5: + : 1.0
2.SAP Solution Manager Implementation Guide  SAP Solution Manager  Scenario-Specific Settings Change Request Management  Standard Configuration 
General activities
Click on the Execute button with the text u201CActivate BC Sets u201C
It will take us to SCPR20 Transaction which is used to Activate the BC sets
Select the BC set SOLMAN40_CHARM_BASICFUNC_001 , it is for solution manager version 4.0
Click on the Activate Button
Create a Request for Activating the BC Set
Click Save button to assign with a TP .Other wise Create a new Transport Request (TP).
In Overwrite Data Box, select the Overwrite data, and in Activation Mode box select Expert Mode Option , Click on OK Button to activate this BC set.
3.SAP Solution Manager Implementation Guide  SAP Solution Manager  Scenario-Specific Settings Change Request Management  Standard Configuration 
Transport Management System.
In Order to do all the Settings under the Transport Management System do follow the steps.
All the below settings has to be done in satellite system not solution manager
1.     Define Transport Routes for System Landscape
Go to Transaction STMS
Choose Overview -> Systems.
Double-click each system.
The Display TMS Configuration: System <system ID> screen appears.
Select the Transport Tool tab page.
If the entry CTC does not appear in the Parameters column, enter it there, and then in the Value column, enter 1.
Save your entries.
Configure Transport Strategy
Go to Stms Transaction
Go to Menu Overview  Transport Route
Doubt click on Each System . In the Transport strategy group box, select Single transports
(since only Import Single and Import Project All are used).
In the Quality assurance group box, deselect Delivery after confirmation
1.     Choose Continue.
Activate TMS Trusted Services
Choose Overview -> Systems.
Choose Goto -> Transport domain.
In Management Tab
In Security Options group box
Click on Trusted Services Active
Go to QA Approval Procedure
You should not assign any QA approval system there
Save your Entries
Call Transaction STMS.
Choose Overview  Systems. The system overview appears.
Choose SAP System  Create  Domain link.
The dialog box Request for Linking 2 Domains appears.
Enter the system name, host name and system number of the domain controller you want to link to, and then confirm your entries.
Your SAP System performs the following actions automatically:
o     Generates the required RFC destinations.
o     Sends the address data of the controller to the controller in the other domain.
You can now see that you have requested the domain link to the other domain in the system overview.
Click the Distribute and Activate TMS Configuration ICON on the Application Toolbar
After that Go to SAP System  Check  Connection Test, transport directory and transport tool
Check all once whether it is having inconsistency.
4.Check Configuration of Transport Domain
Log on to every domain controller that is connected to your transport landscape.
Call transaction STMS
Apart from the information "You are logged onto the domain controller", you should not be able to see other messages or warnings.
Generate RFC Destinations to Client 000
Call Transaction SMSY.
Go To Landscape Components
Go to your Satellite System
Click on the Domain Controller System
In the Right side Tab strip, Click on the Clients, Select 000 client Click on RFC generate Button
Give the User name for Read Access and Change Manager
Click the OK Button to Continue
Add Import Authorization to Operator/Administrator
Make sure that the operator and administrator users in client 000 of the target systems have the same name as their user in the Solution Manager   system.
Assign import authorization to the operator and administrator users in client 000 of the target systems (SAP_CHANGEMAN_OPERATOR and SAP_CHANGEMAN_ADMIN roles).
5.Set Project Assignment of Requests as Mandatory
If you want to enable your change request project is mandatory while creating a request for workbench or customization object, follow the steps
Go to Transaction
/N/TMWFLOW/CMSCONF
Select the Change Request Management System
Double click on the Project Assignment column
A new windows opened as follows
In the Attribute Required for Requests Box , Select Mandatory on the Default for all clients List
In the Client u2013Specific Setting Activate the tick mark of the Right side of the Table Control
6.Change Transport Request Option
Requirements
u2022     Repository changes are permitted in the system where you want to change the transport request option. (If they are not, proceed as described in SAP Note 327351.)
u2022     You do NOT use template projects.
Go to Transaction SE38
Enter the following Program   SAPLSCMA
Click on the Display Button
Click the Find icon and type the following keyword,
G_ACTIVATE_CORRECTION_SYSTEM
Click on the OK Button to search
Using Modification, Edit the Program in Change Mode
Delete the following lines ,
message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
And Insert the following lines ,
no_automatic_recording = 'X'.
Call Transaction SCC4
Select the Change Request Management Client and Click the Display ICON.
Go to Transaction SE 11
Enter the table SCMATREED
Choose Display
In Menu Click on Goto -> Indexes,
Choose Yes in the dialog box, and enter the index name 001, and the following short description: Index for Node in SCMATREE.
Maintain Number Ranges
Go to Transaction SNRO
Enter Object Name /tmwflow/M
Click on Number Range Button on the Application Toolbar
Click on the Change Intervals Button
For the new interval, enter 01, and use the F4 Help function to select a value for the From Number field.
The system returns 000000001 to 999999999.
Save the Entries
Come to the SNRO First Screen again; follow the same procedure for the following objects
/tmwflow/d and /tmwflow/v.
SAP Solution Manager Implementation Guide  SAP Solution Manager  Scenario-Specific Settings Change Request Management  Extended Configuration  Schedule Manager
( Note in HLL We have using the Standard SAP Variants )
Create Customer-Specific Variant for Task Lists
Click on the Execute button
To Create a New Entries, Click on the Create New Entries Button
Type the Variant Name in the Variant Column Starts with the name space of u2018Zu2019, and in the Description Column you can maintain the description
Define Additional Tasks for Task Lists
Create Customer-Specific Header and Footer Tasks
Install Template Report
For all the above Refer IMG Node, follow the Steps
SAP Solution Manager Implementation Guide  SAP Solution Manager  Scenario-Specific Settings Change Request Management  Change Transaction
Check Installation Activities
Make sure that you have performed the iBase IMG acitivities before you proceed with the Change Transaction IMG activities: SAP Solution Manager -> Basic Settings -> SAP Solution Manager System -> Service Desk -> iBase.
Check the all the following settings has been done .
Initially Create and Assign the Component Systems as iBase Components
Manually Create and Assign the Component Systems as iBase Components
Assign Business Partners to iBase Components
In the following Link all the Settings comes with BC Set.
SAP Solution Manager Implementation Guide  SAP Solution Manager  Scenario-Specific Settings Change Request Management  Change Transaction
USER Authorization
Administrator
SAP_CM_SMAN_ADMINISTRATOR
Change Manager
SAP_CM_SMAN_CHANGE_MANAGER
IT Operator
SAP_CM_SMAN_OPERATOR
Developer
SAP_SOCM_DEVELOPER
Regards
Sreedhar Reddy.A

Set Project Assignment of Requests as Mandatory in Change RequestManagement

Hi Guys,
I am working solution manager 4.0 CHARM implementation. now my issue is i want to set project assignment of requests as mandatory in CHARM. but when i go to transaction code /tmwflow/cmsconf i dont find any projects.
Before this i have created a maintenance project for CHARM with maintenance cycle and activated change request management and i also generated IMG project for my maintenance project, but still i could not find any projects in /tmwflow/cmsconf. Therefore i would like to request you people to give your valuable inputs for this at the earliest possible.
Thanks&Regards
Raju

Hi Yorker,
For the first part of your question where you want to make a field mandatory in the sales view of article master, you can do it through t-codes OMSR and OMS9 where you can find the field selection group to which your field is attached and change that field to reqd entry.
And for the secod part where you want to find out articles where this field does not have a value. Goto SE16N or SE16 and for that field click on the selection options button and select = and leave the field blank. This will give you all articles that don't have a value in this field.
Regards
Kaizad.

Change Management. Cannot go to the next phase ... And common questions.

Hi dear colleagues!
Here there are some unpleasant problems which has arisen during Change Management functions realization...
1. After approving of Urgent Correction by so-called "Change Manager", "developer" couldn't set it status "in development" -> and begin corrections in DEV system. It outputs in status bar: "NO ACTIONS IN THE WORK LIST".
2. How should i link some urgent correction (or simply Service Message) to a specific Maintenance Cycle?
The same problem I cannot go to the next phase, system outputs that "No Maintenance Cycle is open for the current system".
3. And please can u explain in a simple words: Should i always make a maintenance project for using "Change Management" functions?
4. Can we use "Change Management" for 4.0C (vers. of satellite) systems?
Any help and tips would really appreciate.
Best regards,
Vladimir

Hi,
For configuring change management, you will have to follow the SPRO guidelines for setting up transport routes between satellite systems.
Well i list down the activities that you need to do. Details you can find in SPRO -- > SAP Solution Manager --> Scenario Specific Settings --> Change Request Management --> Standard Configuration --> transport management System
1) Activate Extended transport control by setting System Parameter CTC=1 in STMS --> Systems
2)Create Client specific transport route between satellite systems
3) Ensure that all the systems in the domain have the same transport group.
4)Configure or activate Single transport Strategy in STMS --> Overview --> transport routes.
5)Activate TMS Trusted services in STMS --> Overview --> Systems --> Goto --> transport Domain --> Management Tab page --> Security option group box.
Besides these activities, you will have to execute the SPRO IMG Activity
SAP Solution Manager --> Basic Settings --> SAP Solution Manager System --> Activate Integration with Change Request Management
For activity Intigration Solution Manager make the following entry
APPL: Change Request Management
RFC Destination : NONE
For activity Integration Change Request Management
make the entries in table BCOS_CUST as g
iven in the IMG instruction.
Now in SOLAR_PROJECT_ADMIN you can activate a maintenance project for change management by going to System Landscape --> Project Cycle
Click the check box Activate Change request Management.
(NOTE: The above option comes only in Solution Manager 4.0, for SOLMAN 3.2 you can directly create maintenance cycle in /n/tmwflow/cmsconf --> Distribution Routes --> Project Landscape group box .)
Now you can create a maintenance cycle by clickin on the button Create Task List in project cycle tab page.
Navigate to task list and activate the tasklist (Maintenance Cycle) by clicking on the status button.
Now while creating change request ensure that you are assigning the correct ibase /component of the production system in the satellite system landscape. You have to enter the ibase component of the client of the production system to whcih the client specific transport route has been made. You can find this number in transaction IB52
Hope now u can move on with CHARM.

Transaction /n/TMWFLOW/CMSCONF

Similar Messages

Maybe you are looking for