N73 ME Music Button stop functioning

Dear All,
Please help me.
My Nokia N73 ME, I buy last 2 month having problem.
{problem}
Music Button stop functioning after ON so long time.
Power OFF and ON again the Music Button can function again.
After several hours ON, the problem occured again.
Last week I already update New Firmware version V4.0727.2.2.1 04-07-2007 still can not solve this problem.
Anyone facing same problem and what the countermeasure?
Thank you.
Best regards,
Abramosa

I have got the same problem...No choice I have add shortcut to top menu to play my music
N73 ME - V 4.0839.42.2.1 (27-09-2008)

Similar Messages

  • My N73 ME Music Button Not Function

    Dear All,
    Please help me.
    My Nokia N73 ME, I buy last 2 month having problem.
    {problem}
    Music Button stop functioning after ON so long time.
    Power OFF and ON again the Music Button can function again.
    After several hours ON, the problem occured again.
    Last week I already update New Firmware version V4.0727.2.2.1 04-07-2007 still can not solve this problem.
    Anyone facing same problem and what the countermeasure?
    Thank you.
    Best regards,
    Abramosa

    I have got the same problem...No choice I have add shortcut to top menu to play my music
    N73 ME - V 4.0839.42.2.1 (27-09-2008)

  • Bluetooth keyboard button stops functioning

    Hey guys,
    I got to buy me each year at least one new bluetooth keyboard as some day one of the keys stop to work.
    Last time it was the W and this time now it is Q button stop functioning.
    Any idea if this is a known qality issue of the keyboard or if there is a way to reset or any thing like that.
    I like the kb but it really ***** I got to buy me a new one at least once a year.....
    Let me pls know if you have got any advise or having made same experience..
    /frank

    Hi JMackey,
    Is there the same issue when sending emails via OWA?
    If you use "Ctrl+Enter" shortcut to send the email when the issue occurred, how about the result?
    Best regards,
    Niko Cheng
    TechNet Community Support

  • IOS 5: Phone button stopped functioning

    After updating IOS 5,  the phone button at my IP4 has stopped functioning. I can not make phone calls except using contacts button or listen my messages. I see that I have 4 messages but the application switches off after two seconds or does not start after pressing the phone button. There are other problems such battery draining. I realized that notification system is not functioning as well, despite me turning off all notifications I am still getting notifications from NYT and  Facebook as well.

    It took me a couple of days because most of the time I have the sound turned off.  It was only after my son was playing Slice Fractions and asked me to turn on the sound that I noticed it at all and only then because the app was loud as...well, it was really loud. 
    On the other end of the service report spectrum, for whatever reason, my gut told me to get Apple Care when I got the phone.  May have been the persuasive smile of the salesgirl or just good instincts...  Still, they were really professional on my text-chat session.  We tried a few of the things that were outlined above and then they just set me up with an appointment at the Genius Bar for Wednesday afternoon.  I am told there is a good chance that they will give me a new device if they can't fix it on the spot.  Since I will be restoring from a backup, the problem, if it is a glitch, should appear on the new phone as well and then we'll have our answer...
    Apple Care vs. Taking Care is like the difference between Good Whiskey vs. Cheap Whiskey: 
    Pay now or Pay later...
    I'll keep you posted...

  • Send Button Stops Functioning on Some Email

    We are using Exchange 2010 in online mode with Outlook 2007 (I have a couple of Outlook 2013 users who are having this problem, too, though). We experience
    an intermittent failure of the Send button. The email doesn't go to the Outbox - nothing happens when the Send button is pressed and appears to be disabled. We
    use the workaround of creating a new email and pasting everything over. 
    I have seen some chatter in the past about inline JPEG signatures (we have them, but this has happened without them) with HTML email (we are in HTML
    mode, but changing to RTF and then back to HTML, which has been suggested as a solution previously doesn't work). This happens on emails with attachments, emails with no attachments, emails that were saved to drafts, brand new replies, forwarded email, new
    email. I can't see a pattern.
    I remember reading something in 2011 about there being an issue with the Exchange store that was supposed to be resolved in a roll-up. We're current with our roll-ups and patches. 
    Is anyone else experiencing this issue? 

    Hi JMackey,
    Is there the same issue when sending emails via OWA?
    If you use "Ctrl+Enter" shortcut to send the email when the issue occurred, how about the result?
    Best regards,
    Niko Cheng
    TechNet Community Support

  • My sound button cant function even the sound also not sound but when i received call, it do ring..just when i try to play utube or play music it will never have sound...please help me. now i'm using ios7. It just recently happened.

    My sound button cant function even the sound also not sound but when i received call, it do ring..just when i try to play utube or play music it will never have sound...please help me. now i'm using ios7. It just recently happened.

    Hi hayscart,
    This article contains steps to try when you are having trouble with the iPhone's speaker:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    - Ari

  • Hi all, my ipad mute hardware button just stopped functioning, I have to use lock rotation to enjoy some apps..what do I do?

    Hi all, my ipad mute hardware button just stopped functioning, I have to use lock rotation to enjoy some apps..what do I do?

    Your statement doesn't make sense to me.... But it could just be me not understanding what you mean. Let me explain how the side switch and the control center work for screen rotation lock and system sounds.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • When my ipod nano 6th generation falls asleep or if the light dims the music will stop how can i fix this

    i cant get this to stop i have reseted it and everything. i have the 6th generation ipod nano and when i press the little sleep button so i wont press any buttons it turns off or when it dims the light the music will stop i dont know why please help

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
    i

  • My iPhone 4 is only 14 months old over dropped very well looke after, one day the lock button stops then the volume buttons, now the headphone port does not work and the battery lasts about 4 hours after full charge I still have a year left on my contract

    My phone is 2 months out of warranty, it's never been dropped or miss used yet the past week every day something has gone wrong with it. First the lock button stopped then the side volume buttons. Then the head phone port when I putt headphones in the phone turns the volume
    Down automatically and it won't turn up until I take my headphones back out. The battery lasts 4 hours max after a full charge and today I took my phone off the docking charger and all my music has gone! The phone is breaking down more and more everyday what is going on! I know people who have had there iPhones years an non of this happen! I still have a year left on my contract too!

    Who is your carrier and what is your coverage with them? If you are with say Verizon, and have Total Equipment Coverage or Extended Coverage, they will swap it out for you under Manufacturer Warrantee.

  • Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet thos albums appear on the nano icon on my desktop but none of the others. What's happening?

    Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet ONLY those albums appear on the nano icon on my desktop after being dragged there but none of the others. What's happening?
    I've read some of the post here that I thought might help but they refer to titles (Music) and triangles in the "Devices" window which are nowhere to be seen when I open the "Devices" window.
    I have iTunes 11.0.3 and Mac OS 10.6.8. Does this make a difference?

    I should mention that, for the first problem, I do make sure that my new tracks are stored in the folder where I told iTunes that my music is in. Also, when I say the cataloging of my library stops short of cataloging all my songs, I have tried leaving the computer unattended for days (my computer's sleep mode is disabled). It always stops before cataloging all of my music regardless of whether I am doing something else while iTunes is cataloging, or if I just let iTunes be the only program that's open during the cataloging process.

  • Music buttons not working in lock screen on my iPhone 4 after iOS7 update.

    After I updated my iPhone 4 to iOS7, the music buttons like PLAY, REWIND and FORWARD are not working in the locked screen as well as on swipe up menu. Any resolution please?

    hi there
    i had a problem with my wifes iphone 4s, today morning while travelling to work i changed a setting on repeat option and changed it to repeat artist, it was fine until when i finish my work and on my way back i found songs are not playing anymore, lots of stop signs next to my song list, play/pause button not working, album arkwork keep moving from one to another on its own, so after i reach home i try to do some research on Apple support communities, try to soft reset my phone closing all the apps on background didnt work, also note that control centre music player was not working as well. none of the solutions worked. after trying for two hours i found out that the trouble is in repeat options , so i changed it from repeat artist to repeat off. and the music start playing as usual, but i still have those stop buttons next to the songs i tried to play earlier. At least it fixed temporarily. please also note that in the meantime i tried to sync my phone with the pc and suddenly its start syncing all the songs again assuming there were no songs on my iphone.  so guys i think soft reset might not help all the time but try to remember what settings you changed recently and change it back to the original option, not sure ,but it might help.

  • My top button stopped working, the physical button is broken.

    My top button stopped working, the physical button is broken. Apple genius' stated they will not fix my phone because there are signs of moisture in my phone. What does that have to do with my broken button, and why can't my phone functioning the way it is supposed to due to an issue that is not my fault?

    wow i dont know who you are getting your phone "fixed" through but its not apple.
    Apple does not charge prices like that.
    If you got it 1 year ago in september, the hardware warranty has expired by now unless you had your device covered by applecare insurance.
    and if it WERE covered by limited hardware warranty, an obvious hardware issue like the power button not working is covered under the warranty UNLESS it was due to accidental damage.
    So if you paid 198 dollars, chances are its because you dropped your phone and thats why the button was not working,.
    ..and even then, the iphone 4 out of warranty/accidental damage replacement fee is 149. not 198.

  • I Pod Touch Music player stopped working but Sounds and iTunes samples still work?? Help.

    Howdy. My Music player has stopped working, but regular sounds and iTunes samples still work?? Can anyone help.
    Push the orange music button and the player opens, but when I push the play button nothing happens other than the pause icon comes up.
    Both side volume and the onscreen volume read at full.

    -restore ipod to latest ios if problems still happenes then it's a hardware problem nothing like a good old appointment at genuis bar would help.

  • New version (2014.1) bug : stop() function won't work

    Hi everyone,
    I would like to know if someone else had this issue.
    I've set a symbol that has an animation into another symbol that is put in the Stage. ( Stage -> symbol_father -> Symbol_with_animation) .
    I want to make this animation start only when i press a button into the Symbol_father.
    The issue is, as soon as I run the Stage,  my animation will start regardeless i've insert every type of "stop()" function ( for example : sym.stopAll() into the stage, or sym.stop(0) into the start function of the symbol_with_animation, and so on...)
    Thanks for your time,
    greetings.

    There is no such bug AFAIK.
    I have created a composition @ Dropbox - NestedSymbols.rar as you described, and everything seems to be working fine.
         Preview in the browser and click the green box.
    Let me know if it helps, else share your composition  so that we can test.
    hth,
    Vivekuma

  • My buttons stopped working?

    I was listening to my iPod and, without dropping it, the buttons stopped to work. The music was still playing and I could scroll the volume up and down, but the forward, back, menu and play buttons weren't working at all. I plugged it into my computer but it didn't fix anything. Any ideas? I think I probably I need to go to an Apple store. Thanks in advance.

    Hey there,
    Try toggling the hold switch on and off a few times and see if that does anything for you?
    Does the iPod show up on your computer and in iTunes? If it does, it would probably be a good idea to restore the iPod. Keep in mind that doing this erases and music and files from your iPod so make sure you have them all backed up on your computer. Instructions on restoring can be found in the Apple document below.
    http://support.apple.com/kb/HT1339
    B-rock

Maybe you are looking for