N79: SMS cannot send/receive after update is perfo...

Hi, I am nokia N79 user. I encountered problem to send out/ receive sms after an update is performed to change "Download!" to "Ovi store". Before the update, I was able to send receive sms like normal. Once the update is done, sms is banned from sending out or receiving. I checked all the settings, they are fine. To confirm that this is phone software problem, another sim card is inserted into the phone, yet the problem is still there. I have tried to restart my phone by taking out the battery and do restore factory setting. But the sms is still no way to send out / receive.
My phone is using the latest software.
Can anybody help me?
If "Ovi store" is the culprit, is there any way I can revert the update?
Solved!
Go to Solution.

there's no relationship between them but u can perform a soft reset after backup your phone
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Similar Messages

  • Can send SMS but not receive after update...

    After updating my iPhone 4S to ios6 i have problems with receiving messages.I can send SMS but not receive. What to do?

    Although I don't believe in consequences, I think this might be one of them. My email was working fine until I installed my VPN. I use the Thunderbird email application, which I like a lot, for three Hotmail accounts and two Yahoo accounts. After installing the VPN I could receive mail but could not send it on any of my accounts. I contacted the VPN and they sent me some numeric IP Addresses to put in my account settings. One for the Hotmail accounts and one for the Yahoo accounts. I did as instructed and the email seemed to work okay. It was late in the evening and I went to bed. The next morning, I could send and receive emails on the Yahoo accounts, but could only send emails on all of the Hotmail accounts.
    I guess I'd like to know if anyone else is having this same problem. I'd hate to think it was just me. :-)
    I would like for Thunderbird to tell me if there is a way to change the outgoing server in the Account Settings, so I can enter the IP Address in there, or does the fact that I entered an IP Address in the Server Name box, cause it to override any other entries? Or should that even make a difference with me receiving mail?
    Also, at what time limit does Thunderbird send back a message that the connection to the server timed out? I continually get that message.
    I found a way to do a ping on the Hotmail server and the fastest response time for the last two days was 258.09 which seems very slow for a business computer. At least for a business that wants to stay in business. So is that time above the Thunderbird threshold of the connection time out message to be generated?
    Thanks for all your help and suggestions, Carole

  • Cannot send email after update on iphone 5

    cannot send email from one account after update,  states my password and/or user name incorrect.  I have it written down,it's not incorrect.

    After the iOS 7 update, in order to send email from my iPhone5 and my daughters (also from our iPads) I had do follow Apples reset instructions. Hold the HOME buttton and the START/AWAKE button until your device restarts and you see the Apple logo when your device restarts. You do not have to swipe the message bar which shows up sometimes as your iPhone is shutting down. Sadly to say, but on my daughters iPhone 5, I had to do this 5 times.
    If you live near an Apple store, make them do it so that someone at Apple will send a fix for other people. I looked for a simple way to contact Apple and there is none. There is a series of prompts and links that are time consuming to be able to reach support about even a simple problem.

  • Since upgrading to IOS 8.1.2, I cannot send/receive emails from either of my Apple or Verizon email accounts.  Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts.  I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Hi Milrclan,
    Thanks for contributing to the Apple Support Communities. 
    If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Best Regards,
    Jeremy 

  • Can't send files after update

    I'm having problem with sending files after update to 7.0.0.12 with xp
    It is trying to send file but then it says: This photo is unavailable
    Solved!
    Go to Solution.
    Attachments:
    skype.jpg ‏22 KB

    Hi
    I also cannot send files for a few weeks now. It used to work and now it does not. I tried reinstalling and everything I could think of but it still does not work.
    I even thought it could be because I installed skype on my phone which seems to be always signed in no matter what I do (but that's another issue) so I uninstalled it from my phone as well. I read all articles and solutions. Nothing helps. I checked my IE and it is v11.
    I cannot send files to anybody (not just specific contacts). The opposite side does not even get notified about a file being send or something, while on mine there is this ever rolling circle on the right corner of the message (see screen-shot).
    Some time ago I had problems saving the received files so I have been touching some options - could it be that I changed something which I should not have?
    Please advise!!!
    Attachments:
    2015-02-23_160543.png ‏11 KB

  • Thunderbird is no longer able to connect to internet (sending/receiving email, updating, creating a new account,...Firefox connects well

    Version 24.4.0 worked fine until yesterday (2014-04-06) running under windows 8.1 and suddenly it could no longer connetc to internet (sending/receiving email, updating, creating a new account,..). No change was done on my accounts configuration. Other applications connect correctly to internet. Some Windows 8.1 updates were automaticaly applied during the same period (??).
    Any suggestion would be appreciate
    Rgds

    Thank you for your answer. Of course before posting I checked the differetn relmated topics..
    As I explained nothing changed between the moment Thunderbird worked and the moment it stopped working. I checked the firewall (Norton intenet security) and the firewall of my router (Netgear). Nothing relates to Thunderbird.
    I cans get my mail from another workqtation (ubuntu/evolution) with the same provider (same parameters). I just wonder if the last windows 8.1 updates could provoke this trouble...
    For the moment I cannot get rid of this.

  • TS3274 how come all of a sudden, I cannot send/receive messages, but I can receive e-mails in my Ipad?

    HOW COME I CANNOT /SEND RECEIVE MESSAGES, BUT I CAN RECEIVE EMAIL?

    Sending and receiving messages has absolutely no relation at all to sending and receiving email.
    Your iPad is not a cellular telephone.  It cannot send or receive SMS text messages.  It can only send or receive iMessages, which are messages to/from other Apple devices (only) on a WiFi or a cellular network that supports iMessage.

  • HT4623 I cannot send texts since updating to Ios7

    I cannot send texts since updating to ios7

    Hello Aupperl,
    Thanks for using Apple Support Communities.
    The following support article has some great troubleshooting steps for you to follow in order to fix the issue of not being able to send email.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Take care,
    Alex H.

  • TS4002 Cannot locate iCloud after updating to iOS 6

    Cannot locate iCloud after updating to iOS 6 on my iPad 3

    Disable all restrictions in Settings > General >Restrictions

  • Since upgrading to Yosemite three days ago I cannot send/receive emails. Can anyone help please?

    Since upgrading to Yosemite three days ago I cannot send/receive emails. Can anyone help please?

    I would try to reset all the settings in Mail, Preferences, Accounts (outgoing and incoming servers) according to your mail providers specs.

  • Curve 8520 cannot send/receive calls or SMS when in range of WiFi - since foreign holiday

    Re-posting this in the Curve forum, where it belongs... hoping someone can help.
    Recently the whole family went to Spain for two weeks. All four of our phones (a Google Nexus 4, a BB Curve 9300 and two BBCurve 8520s) worked OK in Spain, connected to local mobile networks, sent and received texts and so on.
    Since returning to the UK, the BlackBerry handsets have all had problems getting re-registered to our home network (giffgaff, which uses the O2 network, as I understand it). The nexus has been fine from the moment we got back, but the BB handsets are not.
    The symptoms: when in range of a registered WiFi connection, the phones cannot send or receive texts (SMS) or make or receive calls, when out of range of WiFi, they do (sometimes) succeed. It is as though the WiFi settings are over-ruling the service books / HRT for the mobile network.
    The 9300 seems to have sorted itself out, thanks (possibly) to an OS upgrade. The 8520s remain basically useless.
    We have tried: battery pulls, SIM pulls, manual network registration, clearing the service books and re-registering, switching SIM cards between the phones (whichever SIM is in the 9300 works OK, whichever SIM is in the 8520 does not work), OS upgrade.
    The network shows on the handset screen, and connection is shown as EDGE. But calls do not get connected and SMS messages fail with "too many retries". Attempts to re-register the handset result in a message being received that the handset has been registered but it makes no difference.
    The network provider (giffgaff) say they have done everything they can, and I should speak to "an engineer" - but it seems very unlikely to me that all three phones suffered a hardware fault while flying home from Spain, and that the 9300 somehow fixed itself. So I'm convinced it is a registration issue, but giffgaff are not exactly confident in their support for BB.
    So - has anyone ever seen this behaviour before, and how can we fix it?
    Thanks

    Good day
    I took a into the BlackBerry knowledge data base here is some info you can follow
    I cannot make or receive calls
    I cannot send SMS text messages
    Want to contract me? You can follow me on Twitter @RobGambino
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Outlook 2010 cannot send/receive mail AND states mailbox is being optimized due to upgrade AND outlook hotmail connector needs updating.

    As of 2014-March, the same thing happening on my system. This seems to have occurred, after the latest batch of 28 patches (including SP2 - KB2687455) from Microsoft Updates applied on 13-Mar-2014 and 19-Mar-2014.  I have been running Outlook 2010
    since it was first available.
    An unhelpful error is thrown, after trying to manually perform a Send/Receive:
    Not Implemented
    While in Outlook 2010, clicking FILE > INFO reveals the following warnings in red:
    "Upgrade in Progress. Your mailbox is currently being optimized as part of upgrade to Outlook 2010. This one time process may take over 15 minutes and performance may be affected while the optimization is in progress."
    There's an "Upgrade Now" button but it fails to produce any visible result. Next to the button, another warning in red:
    "You must upgrade to the latest version of Outlook Hotmail Connector to continue using this e-mail account."
    Again, I do not have the Outlook Hotmail Connector installed. Nor have I recently upgraded to Outlook 2010.
    I am unable to access ANY account settings, as well as poll my various mailboxes.
    While reviewing the list of installed updates (Control Panel > Programs and Features > View Installed Updates), there are 28 approximate patches -
    specifically, Service Pack 2 (KB2687455) - that were recently applied to Microsoft Office Professional Plus 2010.
    Microsoft, what the #$%# is going on?
    I've read some related posts that suggest the core issue is other than what Outlook is reporting.  The posts recommend the following.  However, in my case, the below steps did not correct the
    issue.  In fact, the new profile would not allow me to view/manage the associated accounts or data files.
    (1) Remove your current Outlook Profile. No worries - this doesn't affect your mail data (.PST files):
    http://office.microsoft.com/en-au/outlook-help/remove-a-profile-HP010356455.aspx
    (2) Create a new Outlook Profile:
    http://office.microsoft.com/en-au/outlook-help/introduction-to-profiles-HA010355553.aspx
    Note: Outlook complained "An unknown error occurred, error code: 0x80040154."  However, exiting the Mail config window and relaunching shows that the new profile is intact.
    (3) If you previously had the Outlook Hotmail Connector installed, reinstall it.  If not, then just ignore and the warning should go away after creating a new Profile.
    32-bit connector: http://www.microsoft.com/download/en/details.aspx?id=24677

    I was able to resolve this issue as follows.  However, why it occurred is unknown at this time and
    unrelated to a corrupted Outlook Profile, as mentioned on my prior post.  It seems highly probable that it was caused by the recent batch of Microsoft Updates for this product which included Service Pack (SP) 2.
    1) Performed a "repair" of Outlook 2010, via the Control Panel > Programs and Features.
    2) Rebooted.
    3) Prior to launching Outlook, returned to Control Panel > Mail and configured the location of my PST file (not in default directory).
    4) Had to reestablish as off my mail accounts, settings/preferences/etc. This step was the most tedious and frustrating.

  • I cannot send emails after latest update/release for "an unknown reason"

    Sorry to duplicate, but the reply I got to my first question didn't help, and there didn't seem to be any follow up. So I am trying to be more specific. I can receive but not send emails. I have read the page of suggested Mozilla solutions (Cannot send messages), tried them all, to no avail. I have contacted Network Solutions. Everything checks out their end. Disabling my anti-virus software does not help. I can send messages from a cell phone. As an experiment, I downloaded Opera, and tried it. I can send messages from Opera. But I don't want to use Opera. I want to use Thunderbird. The exact error message I get when trying to send is... "The message could not be sent using SMTP server XXXXX for an unknown reason. Please verify that your SMTP server settings are correct and try again, or contact your network administrator." I'd be very grateful for help with this.

    closing in favor of https://support.mozilla.org/en-US/questions/1037758
    Also closed https://support.mozilla.org/en-US/questions/1037765

  • Cannot send/receive iMessages

    Hi guys.
    I have an iPhone 5s (AT&T) running iOS 7.1.1. Ever since I updated to 7.1, I've had issues with iMessage. At the time, iMessages would only send to certain people. The issue was bothering me, so I decided to restore my phone. The issue persisted. When 7.1.1 released, I'd restored my phone and upgraded. Note that I am not restoring from a backup, but setting it up as a new device every time. Only this time, I cannot send nor receive iMessages on my phone at all.
    I've tried disassociating my Apple ID and sending an iMessage. When I go to Settings > Messages > iMessage, it shows iMessage as enabled. There is no "activation error," as other users have experienced. When I use another iPhone to try and send a message to myself, even if iMessage is disabled on my end, it shows the blue Send text, meaning I'm running iMessage. I still receive iMessages on both my Macs.
    Since I still get internet on my phone, it leads me to believe this is a software issue.
    Since I've restored my phone multiple times, and the issue was present in multiple versions of iOS, it leads me to believe it is a hardware issue.
    Since I can't send iMessages even without an Apple ID associated with my phone, it leads me to believe it is an issue with AT&T.
    Since I can still send SMS/MMS messages, it leads me to believe it is an issue with Apple.
    As you can see, there are quite a few of contradictory thoughts I'm having.
    Any advice at all is appreciated.
    Thanks in advance,
    Jacob

    Note that I have gone through the procedures listed at http://support.apple.com/kb/ts2755.
    I have also followed a few techniques other users have found who've experienced other iMessage issues (ex. turning off iMessage, resetting network settings, rebooting.)

  • Problems sending mail after update

    Is anyone having difficulty sending mail after the most recent ipad IOS update?  Getting message saying that cannot connect to outgoing server.  Know server is fine for other apple devices.

    Can you receive emails on the account?
    Reset/restart your router and try gain.
    Try deleting the account and setting it up again.

Maybe you are looking for

  • "Edit in Photoshop": Why is Photoshop is greyed out?

    I have LR 3.2 and PS CS5 Extended installed on a Win 7 64 bit PC.  Preferences|External Editing shows Photoshop but when I choose an image and right click, Edit in shows Photoshop greyed out.  (Also when chossing Edit In from the Photo drop-down menu

  • Wish to create an Installation Service Request for Field Service with Multiple S/N

    We are using Oracle 12.1.3 with Teleservice, Field Service and Installed Base. We ship multiple Serial Numbers in a given order then need to dispatch our Field Service technicians in order to install them at the customers locations. I am having a har

  • Notification commands in MDM visio workflow

    Hi Folks I have a doubt about a feature or command in SAP MDM 7.1 for SP10 package to fetch a field in MDM. Can someone help me in using the command  %Code=Name% Regards Shifali

  • Sky Hub upgrade query

    I have been a customer of Sky unlimited for some years now and the service has been very reliable but awful for speed as I'm more than 2 miles from the exchange. A steady but miserable 3.5mbps. I have the white SR101 router. Last week my local cabine

  • Debug version of RSL

    I have a question about how Flash Builder compiles a debug version of application. I've created a test project with enabled "Use local debug runtime shared libraries when debugging". According a documentation, this option allows step into debug RSL f