N900 wifi critical issue

I'm having so much trouble using wifi. and I spent two weekends figuring out a workarround of my problem.
When Ever I go out of range or switch off my wifi router while my n900 conntected to it. After some time it gives the following error in dmesg.
[44597.423706] wl1251: ERROR timeout waiting for the hardware to complete
initialization
After this error if I do a top in terminal it shows wlancond is taking 100% of cpu. rmmod and sudo gainroot hang the terminal.
I raised my voice in maemo bugzilla and forum, no one seems to care about this issue.
I reflash my device with all the old and latest glabal and US n900 images and the issue is there. Can any one alteast let me know if it's a hardware fault so I can send this device back to nokia?
I tried with power setting disabled also nothing seems to be resolving my issue.
I tried different open and locked wifi router in office and back home cisco, netgear... you name it.
help me out plz.

Please check the last post in this bug:
https://bugs.maemo.org/show_bug.cgi?id=6416
restart solves this problem. but for the time being. If I move again or if I shutdown my wifi router, the problem appears again.
I did what I can to make sure I'm not missing any thing... from reflashing to different kernel module compilation. but nothing worked.
Another full day spent and with no clue and help what I need to do next.

Similar Messages

Simultaneous read and write to a cube - critical issue

Hello xperts,
I am facing a critical issue.
I have Cube A which has loads of data in it. I need to take the data of CubeA to a new CubeB as a backup purpose.This activity will take a lot of time.
Concern1 - In the night we have the master data job which runs including the attribute change run job. Will this have any effect on the load happening from Cube A to Cube B.
Concern 2 - After master data job finishes in the system , we then run the transaction data jobs which would update Cube A with the delta data. Now the issue is can this delta load happen to Cube A while there is data load going on from Cube A to Cube B??
Please help me out with this ASAP.
Thanks & Regards
Rohit

Rohit,
Attribute change runs will get affected only when you drop or rebuild the indices - this activity locks the cube - any activity that locks the cube will affect attribute change run - reads on a cube will not lock the cube.
However when you are loading data into your new cube - you cannot load data into the cube - for the very fact that when you load data into the cube - you will drop indices - this will affect the data load into the new cube.
Arun

Critical Issue - 500- Internal Server Error for request in User's Inbox

Hi,
We have developed and deployed SOA composite and custom task flow (For Customized Email notifications).[30.7.1.1 Creating a Task Flow with a Router - http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_designtf.htm#SOASE744]
When a request is generated it goes for an approval. In Approver's inbox in identity console you can see request is pending. When Approver clicks on that link to see request details error is displayed - "500- Internal Server Error "
In OIM logs I can see this:
oracle.adf.controller.ControllerException: ADFC-02001: The ADF Controller cannot find '/WEB-INF/oracle/iam/ui/soa/tfs/remote-taskdetails-tf.xml'.
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:466)
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.loadUnmutalbeMetadataResources(MdsMetadataResourceProvider.java:367)
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.getResources(MdsMetadataResourceProvider.java:179)
        at oracle.adfinternal.controller.metadata.MetadataServiceImpl.getTaskFlowDefinition(MetadataServiceImpl.java:209)
        at oracle.adfinternal.controller.util.SecurityUtils.invokeURLAllowed(SecurityUtils.java:33)
        at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:210)
        at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.invokeTaskFlowByUrl(RemoteTaskFlowCallRequestHandler.java:99)
        at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.doCreateView(RemoteTaskFlowCallRequestHandler.java:64)
        at oracle.adfinternal.controller.application.BaseRequestHandlerImpl.createView(BaseRequestHandlerImpl.java:57)
        at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.createView(ViewHandlerImpl.java:95)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:831)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:422)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)
        at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
        at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
        at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/WEB-INF/oracle/iam/ui/soa/tfs/remote-taskdetails-tf.xml"
        at oracle.mds.core.MetadataObject.getBaseMO(MetadataObject.java:1408)
Screenshot of Error in Inbox:
This is critical issue for us and is showstopper for Go-Live. So any kind of help is highly appreciated.
Thank you,
Tanmay

If its Java only error then there wont be any dump in ST22.
Strange issue for you, in general if we get 500 error, there should be details of it in the same page.
You said this issue is occuring for only one user, is it getting replicated every time?
You are also seeing the same error when u login as that particular user?
Do one thing, assign him the Content Admin role and then do the preview of this iView form content admin and see if ur still seeing this error.
Regards
Yugandhar Reddy

HP Slate 21 Pro: WiFi connection issues

Hi,
I recently ordered two HP Slate 21 Pro devices. Unfortunately, both of them have WiFi connection issues. After some time the properly configured WiFi connection will be dropped, which results in connectionless devices. The WiFi AP is disabled after this, and so a timed reconnect will not succeed.
After inspecting the Logcat I found following lines:
12-05 08:56:58.939 V/EthernetStateTracker(675): report interface is up for eth0
12-05 08:56:58.939 I/EthernetStateTracker(675): interface up event, kick off connection request
12-05 08:56:58.939 I/EthernetStateTracker(675): interface up but ethernet is disabled, stop this interface
12-05 08:56:58.939 I/EthernetStateTracker(675): stop dhcp and interface
12-05 08:56:58.947 V/EthernetStateTracker(675): report interface is up for eth0
12-05 08:56:58.948 I/EthernetStateTracker(675): interface up event, kick off connection request
12-05 08:56:58.948 I/EthernetStateTracker(675): interface up but ethernet is disabled, stop this interface
12-05 08:56:58.954 I/EthernetStateTracker(675): report new state DISCONNECTED on dev eth0
12-05 08:56:58.954 V/EthernetStateTracker(675): update network state tracker
12-05 08:56:58.954 V/EthernetStateTracker(675): Ethernet is disabled, ignore state change event
12-05 08:56:59.080 D/ConnectivityService(675): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
12-05 08:56:59.080 D/ConnectivityService(675): Attempting to switch to BLUETOOTH_TETHER
12-05 08:56:59.080 V/EthernetStateTracker(675): reconnect +++
12-05 08:56:59.080 D/ConnectivityService(675): Attempting to switch to ETHERNET
12-05 08:56:59.094 D/ConnectivityService(675): resetConnections(wlan0, 3)
12-05 08:56:59.201 I/EthernetStateTracker(675): stop dhcp and interface
12-05 08:56:59.208 D/Nat464Xlat(675): requiresClat: netType=1, hasIPv4Address=false
12-05 08:56:59.208 D/ConnectivityService(675): handleInetConditionChange: no active default network - ignore
Especially this line:
12-05 08:56:59.080 D/ConnectivityService(675): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
Is this issue already known? Has someone a solution for me?
Thanks in advance,
Christian

That really shouldn't affect it.
I'm a little stumped because I haven't seen this issue with this device before. The only similar issue I found was this, and it's unresolved.
Have you tried doing a hard reboot of the Slate 21?
I work on behalf of HP (But this isn't my job)
Mark my post as “Accept as Solution" if you feel my post solved your issue, so that others with the same question can find the answer.
Please give me Kudos if I wrote something that helped you.

Critical Issue: Availabilty check & alternative BOM selction issue

During the upgradation project I'm working facing the following critical issues:
1)While creating the sales order, system carries out the availability check in APO.In material master checking group Z5 is defined.
 Actually I want to know hw the system carries out the search in APO & what are the settings in R/3 or APO we have to make?
2)Suppose there are 3 alternative BOM's of a finished product.A requirement is while creating the sales order availabilty check should be carried out & system should check the availability of components on the required date.If the component is not avalable system should go & check the second alternative...third alternative until it gets the confirmation of component availability.
 How we can set this functionality & what are the prerequisites or customisation settings we needs to make?
 Would appreciate providing your inputs on this critical issue.
Thanks,
Nilesh

Before you understand how the APO Availability Checking concept works, I would suggest you understand about the regular R3 availability checking. As this is the core for the SD and APO GATP. Refer help.sap.com
Question 1:
Settings in R3: You have the ATP integration model in CFM1 transaction. You need to activate this just one time and never again. what this does is basically transfer all your availability checking customizing to APO.
All the settings for the Availability Checking group ( Z5, etc) are already maintained in R3 and they get transferred to APO by the integration model. You donot need to anything else.
Settings in APO:
If you are using Product Allocation Concept, You have to maintain the Check Instructions.... Otherwise there are no other settings in APO
Availability Check in APO :
( see the following blog for the requirements class( Name in R3) or check mode( Name in APO) determination http://solution-timezone-issue.blogspot.com/ )
The check mode and the business event( These are hardcode internally in R3 - For SD- A) are determined from the order and based on this in APO it follows the following order
(1) Reads the check instructions settings in APO
For example say the following have been determined from the SD Order : Check Mode 041 and Business Event A
Say we have maintained in APO that the first step is Availability Check and all the other two steps we havent maintained or left blank ( Product Allocation and Forecast)
Look for the customizing in APO
SPRO>APO>GATP>General Settings>Maintain Check Instructions ****
(2) Carries out availability Checking same as in R3 and no different
From the masterial master considers the availability checking group ( Ex: Z1) and the business event( SD transactions- A)
Very Important and the core of availability checking which is similar in R3 and APO***
Against these 2 combinations, the settings are checked which define what stock and in/outward movements are to be considered during the availability check
For customzing settings in APO
SPRO>APO>GATP>Maintain Check Control>
 For Customizing in R3
SPRO>Sales and Distribution>Basic Functions>Availability Check and transfer of requirements>Availability check with ATP logic or planning>Carry out control for availability check
This is the answer to your first question.
Your second question would need some time and I will try to answer it as well.
Hope this helps you..

Wifi disconnect issue w new Mac

I bought a new Mac about a week ago. Right away I started experiencing wifi disconnect issues. I called customer support line and they had me reset the eprom. I don't recall the key sequence now. The problem went away for a week but has now returned. Is this a hardware quality issue?

right my friend, you know this is not an uncommon issue with mac, all my macs have the same issue (macbook, mac pro, mac mini and older imac), i disconnect the wifi and reconnect to sole the issue. it depends alot on what you have thats goign on around you, if there is a lot of wireless networks in your area then this might cause the issue. i improved this problem using a time machine and set the wireless to 5ghz only - it helped. i also bought an airport express to strengthen the network and touchwood this is a rare problem for me now!
try moving the modem around in case it this - ensure its not on the floor or touching the floor, there are many tips for improving modem connections look on youtube
however the sequence for this is on
http://support.apple.com/kb/HT1379

In testing 9 and X, "Compare Docs" we have a critical issue and really need help!

For years we have used Acrobat 7 to do PDF compares and we love it! However, the company recently advised we must upgrade to 9 and then eventually to X. In testing 9 and X, Compare Docs we have a critical issue and really need help. Our PDFs are produced by IT in a batch process and one of our main, critical functions is to compare previous PDFs to current PDFs; however, in using 9 the Compare screen automatically sets the Doc Description for our PDFs to "Scanned Doc" and does not produce any differences! If you try to change the setting to Reports --it totally shuts down both documents without running! Version 7 runs the compare of the same PDFs beautifully, pointing out all the differences, as usual! Has this every happen to anyone? Do you know what we can do to our PDFs to allow version 9 to do the compare and produce results? Why is 9 treating these non-scanned PDF docs as such? Thanks so much for any help or insight you can give me on this issue!

(Moved the discussion to the correct forum)

Critical Issues During SAP Implementation or After Golive

Can anybody tell me one of the most critical/ challenging issues During SAP Implementation or After Golive
in these modules:-
MM implementation
PP implementation
SD implementation
FI/CO implementation
PS implementation
QM implementation
HR implementation
BI implementation
XI implementation
Thanks and regards
RS

hi,
I will list out few of critical issues in
Implementation :
1 . Ensure 100% mapping of business process for all modules with SAP(avoid customization in support phase)
2. Unit & Integeration testing should be through with all validations
3. Master datas(Vendor,Customer) care must be taken will uploading datas thru LSMW,
If there are common vendors for all plants,Create a vendor for a plant extend it to other plants
4. Check tax procedures are customized according to requirements.
5. Complete all print document customizations before go live
6. Complete end user training(2 or more cycles) should be top priority before go live(This will avoid
cancellation/reversal of documents after post go live)
7. Ready with standard MIS reports & customized reports for business decision making
8. Excise opening balance updation in tables for RG1 register in tables(Note 951955) on go live
9. Check all tables datas are updating correctly
10. Declare go live to SAP Support
11. Check All user authorization should be correct according to their roles.
12. Centeralize all master datas creation(avoid duplication)
13. Create transaction variants to avoid entires in unnecessary fields & make certain fields mandatory.
14. Ensure document numbering is completed for all documents
15. Validate accounting entries are hit properly according to requirement in quality client with FI CTM(Core team member).
After Go live :
1. Missing authorization for users will play key part here,For ex : PGI while doing delivery,Excise capture & post in MIGO/J1IEX.
2. Do internal audit every month,identify transactions if there will possibility for misuse or wrong entries,requires validation,identify users weak in certain areas.
3. Identify there is enhancements to be done in transaction process(By step-2)
4. Prepare a list of month & year end activities to be performed for all modules give to users
5. Prepare a list of frequently used transaction codes module wise give it to users
6. If there is subcontracting,ensure challan creation,GR,reconcillation should be done regulary(monthly)
7. Train the users,take reports in respective modules.
8. Additonal customization might be done in print documents.
9. Instruct users/CTM's to adapt SAP Standard practise
10. Update excise tax rates after every indian budget
Hope it helps.
Edited by: Jeyakanthan A on Apr 29, 2010 6:48 PM

Critical Issues on CRM

Hi, all can any one send me some critical issues related to crm marketing and internet sales and basecustomization. Plz send urgently.
thanks in advance
[email protected]

Hi Vasanth,
If you want to see the issues related to Marketing or Internet Sales.
Just click on Search forum in SDN as Marketing or Internet Sales you can see the related issues questioned by various consultants.
Regards,
Johnny.

Critical issues in support

hello
please any body send me some critical issues and their solutions which u faced in support desk. please kindly sent me its urgent
thanks in advance
guru
[email protected]

Hi Guru
All the questions posted in the forum are practical issues only . You can select some of them sub module wise and present them to the interviewers.
Good luck

Can any one share with me any two critical issues in DP support project

Hello friends,
I am new to DP support project in SCM5.0 version,can any one share with me my queries
1.what is my support rolles and responsiblities .in DP
2.can any one share with me any two critical issues in DP and how can you resole it

Hi Sivaram,
1. As a DP functional consultant you need to resolve all the incidents raised in APO DP module( Forecasting, lifecycle planning, master data in APO DP, Planning books, macros , release to APO SNP or R/3 or other systems, CVC maintenance etc) which will also include BW part of SCM -APO related to DP, like data extraction and back up into and from infocubes. You will also support all the interfaces realted to APO DP , for the APO related part of the interface.
You need to reoslve these incidents in the time frames defined by SLAs for the support project.
You will have to also carry out problem management of some of the critical incidents so that incidents do not re-occur.
Further you will have to support Release /Change managment support( if it is part of your contract of Support project).
This willl involve testing changes in quality system, before these are moved to production system.
2 I found 2 crtical issues in APO DP support as below:
2.1 Sales history extraction data interafces from BW system used to have problems : technical problems of interface / jobs in BW running late, functional problems: sales history extract in BW not correct because various reasons
This used to lead to delayed job runs in APO and finally delayed forecasting and ptehr DP processes .
By proactive monitoring by BW team and taking appropriate actions for master data issues, this issue occurance frequency was reduced , but not completely eliminated.
2.2 Another major issue was related to back up process of APO DP planning data into infocubes. Finally by splitting the jobs as per daily, weekly and monthly bakc up procedure , we were able to resolve the issue.
I hope I have answered your queries.
Pleasse check and confirm.
Regards
Datta

Can u please give me two critical issues in app

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
can u please tell me two critical issues in app and explain me how i can solve that critical issues.
and also tell me two critical issues in account receivables or g/l accounting and explain me how i can solve that critical issues

There are no refunds.
You can try contacting itunes support and asking for an exception:
http://www.apple.com/support/contact/

As FI consultant, What are critical issues with other Functional Consultant

Hai, Masters
Can you express about Critical issues with other functional consultant with exmples
Regards
Ramesh K

Hi Ramesh K,
I think the critical issue should be the definaition cross application should be consistency( Ex in FI, CO, MM or SD).
And the Main issue is the result updated from FI to other applications or from other applications to FI is correct or not!
With Best Regards,
Gladys Xing

Material Determination - Critical Issue

Dear Friends,
We are using material determination automaticall
The reason for substitution here is non availability of stock of ordered material, because of which system seeks the stock of substitute material.
The way we have configured is: When material is entered in sales ordered, system check stocks of entered material, if available partially provides the available stock & seeks for substitute material, where even if partial stock for substitute material is available, one more line is created for this material.
This line created as a sub item (like in sales BOM). Futher even after seeking substitute the order quantity is not fulfilled one more line is created for the original ordered material with a backorder tick.
The order items look as under:
10 000000000005893343 50.000 EA Cover
11 000000000005893343 9.000 EA Cover
12 000000000005893653 3.000 EA CYLINDER HEAD
13 000000000005893343 38.000 EA Cover
10) is entered item.
11) entered item available stock
12) substitute item available stock
14) unavailable backorder stock for entered item.
At this point of time we can deliver the order items 11 & 12 with further processing.
But later when we upload the stock for entered item, availability check cannot be carried out in the order, since all the items become grey out, when we create first delivery.
This is a very critical issue in our case.
Please suggest soon as possible so that we crack the issue.
With Best Regards
Nate.
p.s. This Question is posted old ago by Dhananjay. But The solution no exist.
(reference)Material Determination - Critical Issue

Dear Friend.
Thank you for your help.
All the items become grey out after we create first delivery.
So i should be just click on item availabilty, but it doesn't run.
<Step>
1. Material determiantion setting : A(highItem) - A(subitem) - B(subitem)
2. Material stock A : 10 ea, B: 10ea
3. Sales Order Creation : Material A 25 ea -> A 10 ea Confirmation, B 10 ea Confirmation and 5 ea Open, S/O No. QQQQ
4. Deivery Creation : Material A 10 ea , Material B 10 ea Delivery, G/I and Billing
5. Material B 5 ea supplement
6. Sales Order QQQQ Material B : re ATP carry out. But Don't run. All the Items become grey out.
Regards
nate.

Resolve SharePoint Central Administration Critical Issues

In the photo I have tried to fix the critical issues, but have had no luck.
The top three issues are the most important ones i want to get rid of.
Please provide steps to resolving these issues permanently.
"One or more servers not responding" is a stop/start timer issue with SPTimerV4 which is relating to a specific server of mine (Portal10A). I go to this server to start SPTimerV4 in the cmd. When I start the timer, this critical
issue goes away. However, the SPTimerV4 randomly stops again (4 hours later to a day later). Just starting the SpTimerV4 is only a temporary solution, until the SPTimerV4 stops again and I have to restart.
Thank you!

1. Ensure that SharePoint 2010 Timer Service is in Started mode under Start > Services.
2. Ensure your SharePoint 2010 Timer Service is running under your Farm Account. This Farm Account must be part of your admin group and ensure that this account has admin permissions to run services.
The farm account is also referred to as the database access account and is used
as the application pool identity for Central Administration, and as the process account for the Microsoft SharePoint Foundation 2010 Timer service.
Plan for
administrative and service accounts in SharePoint (This article is also applicable to 2010 version)
3. If both of above is already done and issue not resolved yet then restart the SharePoint 2010 Timer Service.
4. If all above does not resolves your issue then please re-run SharePoint Configuration Wizard and restart your SharePoint Application Server.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

N900 wifi critical issue

Similar Messages

Maybe you are looking for