N95 CANNOT UPDATE TO VERSION 30 ERROR WHEN USING N...

Firstly i have bought a N95 with version 10 on and my product code is 0535053 which says i can update to
30.0.015
It was on 02 but seems unlocked as i have used it abroad with different sims
I am currently in Thailand although it a u.k phone and have tried everything to sort this out
I have un-installed all nokia programs -re-installed and still it fails to complete
I have the latest NSU but do not see the amount of time to complete just the amount of data sent and it gets about 50% of the way and then i get the failed message and do i want to retry
Please help as i think the phone is great but is it much much better with version 30?
Thanks in advance

Hey please help still trying

Similar Messages

The report cannot be rendered because of error when using a word template

Hello
When using a report done with a word's template I always get the same error when I try to view as HTML:
String index out of range: -1
The report is validate in word and the HTML preview is done correctly.
Any idea of what can be wrong in the BI server?
Regards and thank you in advance
José Tirado

Hi Jose
Thats a tough error to diagnose ...
Can you send me your template + XML data
TimdotDexteratOracledotCom

I cannot update my itunes account. when I try to edit information I am getting an error message

cannot update my itunes account. when I try to edit information I am getting an error message

To everyone that is having this problem:
I just ended a 2 hour session with Apple Tech Support. We had to take it to a level 2 support person, but finally got it running. Here's what she had me do. Go to Control Panel, Add/Remove Programs. Uninstall ALL Apple products on the Computer. This inccluded Apple Mobile Device Itunes, Bonjour and Quicktime. I doubt if we would have had to but she had me download a fresh copy of iTunessetup.exe and run it. iTunes came up and ran on version 11.1.4. Then I reinstalled Quicktime.
It is my personal opinion that there is a flaw in version 11.1.4. You shouldn't have to go through all of these hoops just to update a single application that was working fine proir to the update attempt.
That's what worked for me. Hope this helps you. Any questions, get back to me.
Good Luck.

Upon updating to firefox 6, I get the error message "cannot update because 'libsmime3.dylib' is in use" Now firefox cannot start because it is partially updated and non-functional.

Firefox fails to open, now that it has been partially updated. Initially, it asked to replace the old firefox, which then proceeded to the next step when this appears: "cannot update because 'libsmime3.dylib' is in use". I have quit all applications and restarted, trying to run the install again as the first thing when the computer comes up. Mac version is OS X 10.5.8.

Firefox is already running but is not responding
* https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding
Profile in use
* http://kb.mozillazine.org/Profile_in_use
The program must close to allow a previous installation attempt to complete
* https://support.mozilla.com/en-US/kb/The%20program%20must%20close%20to%20allow%20a%20previous%20installation%20attempt%20to%20complete
Check and tell if its working.

After Effects CC, cannot update to version 12.1 from 12.0....tried uninstalling AE, tried reinstalling CC app...no change.

I'm having a similar problem with After Effects CC, cannot update to version 12.1 from 12.0....tried uninstalling AE, tried reinstalling CC app...no change.
I can install AE-CC 12.1 on a new machine without issue.
Please provide the files to be removed to force update.
I'm using 10.9 - Mavericks and cannot use AE without this update.

Attempted to install update manually but rcvd error listed below. Admin is not suppressing updates, I can confirm as I am the admin. Also, other apps update without issue.
I've noted that users have experienced a similar issue with Photoshop, listed here: http://forums.adobe.com/message/5875088#5875088

Error in SQL Query The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. for the query

hi Experts,
while running SQL Query i am getting an error as
The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. for the query
select T1. Dscription,T1.docEntry,T1.Quantity,T1.Price ,
T2.LineText
from OQUT T0 INNER JOIN QUT1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN
QUT10 T2 ON T1.DocEntry = T2.DocEntry where T1.DocEntry='590'
group by T1. Dscription,T1.docEntry,T1.Quantity,T1.Price
,T2.LineText
how to resolve the issue

Dear Meghanath,
Please use the following query, Hope your purpose will serve.
select T1. Dscription,T1.docEntry,T1.Quantity,T1.Price ,
CAST(T2.LineText as nvarchar (MAX))[LineText]
from OQUT T0 INNER JOIN QUT1 T1 ON T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
QUT10 T2 ON T1.DocEntry = T2.DocEntry --where T1.DocEntry='590'
group by T1. Dscription,T1.docEntry,T1.Quantity,T1.Price
,CAST(T2.LineText as nvarchar (MAX))
Regards,
Amit

Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.

Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.
Follow write permission on thread below - same error message
Re: CS6 updates and Mac write permissions
Need Adobe help to solve this. My own searches in Forums and Google all have failed.

It is not an Adobe problem. You have a OS permissions problem. You can try to correct this by using Disk Utility to Repair Permissions. It is in the First Aid area of Disk Utility.

HT201210 trying to update my phone and it says cannot update due to unknow error any help

i was trying to update my iphone 4 and it says cannot update due to unknow error any help ?

Hey alyreed22,
Thanks for the question. I understand you are having issues updating to iOS 7. The following articles may help you resolve the error message:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Thanks,
Matt M.

Cannot update OSX version 10.6.8 on my mac in order to sync iphone 5s with itunes

I cannot update OSX version 10.6.8 on my mac in order to sync iphone 5s with itunes, I am currently running 10.5.8 which appears not to support iphone 5s, i have available space on my mac but cannot seem to install. What am i doing wrong, what do i need to do ?

Choose About this Mac from the Apple menu and check the processor.
If it's a PowerPC Mac, it's already running the newest OS it can.
If it's an Intel Mac, click here, install the DVD, and run Software Update twice.
If you upgrade the OS, back up the computer first.
(107244)

Logic Pro 9.0 cannot update this version on Lion

I have Migrated Logic Pro v.9.0 from a snow leopard machine to a brand new MacPro (Lion) machine and I get the message that this version cannot run on this version of OSX I then try and update Logic Pro 9.0 to 9.1 to 9.7 and I get the message that it cannot update this version 9.0. Any help please?

oops! - sorted it now - I had suffixed the app with a version number as we were running 2 x versions and needed to identify each one. Taking the '9' out enabled software update to do its 'business'

RPC Server not Available error when using Windows Fax & Scan under Windows 7

RPC Server not Available error when using Windows Fax & Scan under Windows 7

Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Intermittent error when using the Disco Viewer client

Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!

Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael

[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)

Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.S

Dear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath

Error when using PPR in the OA page developed.

HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.

What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block.

UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)

Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
     //Example calling DSE internal function
     //UserFunc.uStop("Terminated by user");
     key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
     OutString = UserFunc.uDESEncrypt(key, Par);
     return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
Matt

Hi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
   a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems...

N95 CANNOT UPDATE TO VERSION 30 ERROR WHEN USING N...

Similar Messages

Maybe you are looking for