N95 NO LONGER CONNECTS TO THE WEB

I have been using my n95 for about 6 months to browse the internet but 3 days ago when I tried to open my browser it did not work.Whenever I press my web button the screen simply refreshes & nothing else happens (there is no error message to say why it will not work).I have contacted my service provider whom I also have an internet plan for my phone through & they have said that everything is fine on their end so it must be the phone.I am really at a loss as to wot to do as I have not done anything to my phone (no updates,no new applications) that might have caused this.If anyone has any ideas or solutions I would greatly appreciate it.

nvm I just did a HARD restart & it fixed the prob

Similar Messages

I can no longer connect to the web

I've got an iPad 2, about 3 years old and I can no longer connect to the web. I do get e-mails, but they come when they feel like it. I don't have trouble getting on the web on my iMac. Thanks for your help and please answer as you would to any neophyte. Cheers

Are you properly connected to WiFi?
Is your iMac using the same WiFi?
What happens when you try to reference a WebSite?

My printer no longer connects to the web...???

My HP Photosmart D110 All-In-One no longer has web capbility. I use it wth an HP Laptop with Windows 7 and a Dell with Windows XP.
Thank you!

Hello mkb,
When you are looking at your Internet connections or ( Wireless summary ) by going to the following.
-Tap on the silver Wireless button, Below the touchscreen
- go to Wireless settings
- from within there tap the right arrow and keep going until you see the Reset/Restore network Defaults, Tap ok when Highlighted.. and then Tap ok again on Yes when it ask's you " are you sure you want to restore the network defaults "
-also i would recommend turning you router off Whilst doing this to refresh it as well.
- let them restore and Reconnect the printer again with a fresh connection
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

After update to version 31, Firefox can no longer connect to the web.

After Firefox updated to v31 and I restated Firefox no longer can reach any website, while Chrome and IE continue to work fine.
Steps I have tried:
- rebooted Windows
- https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can?esab=a&as=aaq
- https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating?esab=a&as=aaq
- starting Firefox with "Add-ons Disabled" (Safe Mode)

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Connection from the web server to the database which is situated in another machine.

Thanks for the reply.
I need to know, whether there shold be a physical connection between the web server and database machine? or can we connect to the database machine through the web, if the database machine has a domain name? if there is a physical connection, we can use the jdbc/odbc connection. but if we are connecting through the web, how can I estblish the connection using a JDBC/ ODBC connection?
Regards,
George

As long as there's a network connection between the two machines, you should be able to make the connection. I'm not sure what the difference between a 'direct connection' and a 'connection through the web' is-- are you actually running a network cable from one machine to another?
When you cannot make the connection, are you able to do a 'tnsping' on the target database?
When you say 'connecting through the web', is it possible that you're going through a firewall? If so, the firewall may be blocking the ports you need to communicate on.
Justin Cave
ODBC Development

My Mac Book Pro suddenly will no longer connect to the Internet at my house. Help?

My Mac Book Pro suddenly will no longer connect to the Internet at my house. My son's MacBook connects just fine. My MacPro connects at work, at Starbucks, etc. just fine, but not at my house. My son's however has no problem whatsoever. I assume that since his computer connects that the router and modem is not the problem. And since my computer connects everywhere but here . . . . it is not a hardware issue. When directly connecting my MacBook Pro to the modem or router the problem was the same. . . no connection. Help?

From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.

Thinkpad Twist s230u: Can no Longer Connect to the Internet

Hello,
Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
Any sort of help or ideas would be greatly appreciated! Thank you so much!
Sincerely,
Ingrid

I just started to have similar problem. I cannot connect to interent via ethernet or wifi. Both connections show I am connected, but cannot acces any web pages. It is like it is not connected. I would like to know how to restore back to when I bought it, 12/20/13, and then re-load the Windows 8 pro that is somewhere on the partition HD. Any help out there?????? All my other devices/laptops/computers work fine on the internet.
Stadtusquo
ingschan wrote:
Hello,
Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
Any sort of help or ideas would be greatly appreciated! Thank you so much!
Sincerely,
Ingrid
ingschan wrote:
Hello,
Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
Any sort of help or ideas would be greatly appreciated! Thank you so much!
Sincerely,
Ingrid

WRT54G ver. 6 can no longer connect to the internet after reset

I reset my WRT54G ver. 6 to clear the password, and now I can no longer connect to the internet with it. I can see the router itself from my PC, but that is all. I've followed the directions here for connection problems, but I can't seem to get an IP Address for it in the Web Configuration tool. Anybody have any thoughts?

Since you reset your router, you need to reconfigure it back again. try the online utility that automates the configuration. download Easy Link Connect utility at www.linksys.com/connect then download "Netset" and follow instructions.
if not Easy Link connect didnt work then you need to do the configuration manually.
1. check physical connection modem should be connected wired to internet port of the router then PC to numbered ports of the router.
2. Brighthouse i believe is cable connection, right? try power cycle your devices (turn off modem and router then turn on modem 1st then router next). check if your online.
3. if not. check PC ip. click "start" then "run" type in "cmd" then press "OK". the command prompt should pop-up. type "ipconfig" and check IP and gateway. you should be getting an ip: 192.168.1.x and gateway: 192.168.1.1
4. access router. open IE, then type in http://192.168.1.1 on address bar.
5. you will be prompted with username and PW. "admin" is the default password. on setup, just below are subtabs. select "MAC address clone". in it, set "mac clone" to "enable" then click on "clone" then "save settings".
6. power cycle devices again. try to go online
note: if you dont have latest firmware. try updating if needed
Message Edited by whodas on 11-07-200601:28 PM
it is EVIL enough for GOOD men do NOTHING.

E1000 won't connect to Cisco Connect or the Web based set up

My router is working fine but I cannot connect to Cisco Connect or the web based advanced features now. I know I broke the cardinal rule by using advanced set up so that explains why Cisco connect won't work. But I can't figure out why I can't connect to the advanced web based utility now. Who made the decision to put some features in cisco connect but not include those features in advanced settings? And then if you use advanced settings cisco connect no longer works. This is such a turn off I'm actually thinking about returning the thing to Best Buy. That's like saying "if you open the hood of your car and touch anything parts of your car will no longer function". I call support and they repeat what they read on paper "reset the router and start over and don't use advanced settings". What a pain in the &^%$.

I've reinstalled the router again and just switched the ssid and password where it was before so all the devices in our home can connect. I first shut down the guest account using Cisco Connect (which is the only place you can control the guest account) and now I just use the advanced settings. So of course Cisco connect no longer works. I've got a strong signal all over our home. No disconnection issues at all. But this software design that puts some features in one part and other features in advanced and then shuts down cisco connect if you use advanced is insane. If I knew cisco was planning a firmware upgrade to give the advanced mode everything cisco connect has and more then I'd keep this thing. For the life of me I cannot understand why any software engineer would come up with such a design as this. And quite honestly I tried to play by their goofy rules of not using advanced settings and cisco connect died after about 4 uses. Never would connect again. Just said call support (in India) and after telling your life's story to someone simply being told to hit the reset button, power off and start the process all over again. If anyone at Cisco reads this stuff I think I have a legitimate complaint. Why on earth would you put features in Cisco Connect that aren't in advanced and why would you stop running Cisco connect just because I hard coded some mac addresses in advanced mode? I would love to know the logic behine such a crazy implementation of software.

Getting error"Broker Client is no longer connected to the Broker Host"

HI Guruu2019s,
I'm trying to featch Data from SAP using IDOCs in Real Time Job. I have configured Real-time service ,Client Interface and RFC details successfully .also I start my Real-time service, it is showing green symble -" Weating for Idocs "
when start Idoc process from SAP system ,I'm getting below Error-
*"Broker Client is no longer connected to the Broker Host AGLSAPSBXARDDB1:4000"
Pls-2 give me the solution where is the problem -in sap side or BODS side and I hope you should have some solution
I'm doing wait for your response.
Thanks & Regards,
Rajeev kumar
SAP-BODS Developer

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

Will no longer connect to the internet

All of a sudden Adobe Digital editions will no longer connect to the internet. It was fine before last Tuesday. Check internet settings and firewall and nothing helps. Why is it doing this and how can we fix it. Windows 7 - 64 bit

Did this [[Cannot connect after upgrading Firefox|start after upgrading firefox?]]
Generally if Firefox can't connect, but other applications can, it's a configuration problem with a [[Firewalls|software firewall]], either one you installed yourself, one that was included with other security software, or the built-in Windows Firewall.

My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute

My ipad will no longer connect to the internet. Everything else does.

My ipad 1 will no longer connect to the internet. Everything else does. and nothing new was done to the ipad. It's running ios 4 and was fine since the day it came out.

Emma-
In Safari, press on the Bookmarks icon and select History. Then press on Clear History at the top of that menu, and see it there is any improvement.
If not, try unplugging your WiFi router for a few seconds. Then reset the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect the iPad to WiFi.
Fred

Since updating my ipad it will no longer connect to the internet

since i've updated my software on my ipad it will no longer connect to the internet. my husbands iphone will not connect either. my laptop connects immediately and my internet signal is full strength. is there something we are missing?

Hello dchoffa,
Thank you for using Apple Support Communities!
I would start with this troubleshooting from the article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the above troubleshooting does not resolve the issue, I would next try the troubleshooting in one of the other sections down toward the bottom that fits your scenario.
Regards,
Sterling

Since updating my iphone 4s to the most recent update it will no longer connect to the wifi at work, where i am not a network administrator. All helps for this issue instruct turning off the router/other stuff that i cant access.Suggestions?

Since updating my iphone 4s to the most recent update it will no longer connect to the wifi at work, where I am not a network administrator and do not have privliges to reset passwords and turn the routers on and off. Any other suggestions for re-connecting? I have never had a problem before and can still connect to other networks i am a part of...

Try Resetting your iPad: Hold down the sleep and home buttons, wait for the Apple logo, let go of the buttons.

N95 NO LONGER CONNECTS TO THE WEB

Similar Messages

Maybe you are looking for