N95 "Unable to print image when connected in WLAN"

I am able to perform all the possible operations in WIFI zone & office WLAN except printing the images..
Can anyone help me to solve this problem???

Originally Posted by Jeffrey
What notebook are you talking about?
…and what operating system is preinstalled on this notebook?
Are you using the Toshiba preconfigured system?
Is the screen resolution for both devices (internal display and external monitor) set properly?
The laptop is a new Satellite Pro C70 64 bit with 6GB RAM, preconfigured with Windows 8.1
Resolution for laptop screen is 1600 x 900, but goes to 1289 x 768 when a normal monitor is connected.
I don't know what it is when the projector is connected because both screens are blank.

Similar Messages

  • Satellite Pro C70 - Unable to get image when connected to projector

    This machine was purchased for use in the classroom with projector and smart board. When connected to a monitor, the second screen works fine, but when connected to the Epson DLP projector, the laptop screen and projector are both blank Laptop PC's from other manufacturers work correctly when connected to this projector.
    Can you help?
    Message has been edited: notebook name has been added to title

    Originally Posted by Jeffrey
    What notebook are you talking about?
    …and what operating system is preinstalled on this notebook?
    Are you using the Toshiba preconfigured system?
    Is the screen resolution for both devices (internal display and external monitor) set properly?
    The laptop is a new Satellite Pro C70 64 bit with 6GB RAM, preconfigured with Windows 8.1
    Resolution for laptop screen is 1600 x 900, but goes to 1289 x 768 when a normal monitor is connected.
    I don't know what it is when the projector is connected because both screens are blank.

  • 4.0EA1 Diff Carts Unable to compare carts when connected as non-owner

    Unable to compare carts when connected as non-owner.
    Background:
    We have 2 identical environments and I want to compare their objects. I login as user3 with select_catalog_role
    Steps:
    Connect as user3 then populate two carts. One selecting tables from schema1 another cart selecting tables from schema2. Now run Diff Carts.
    Behavior:
    Text field for Connection is disabled: When there are 2 carts loaded Diff Carts does not allows to compare to Connection. This field remains disabled even when one of the cart tab is closed and Diff Carts is started again.
    Unable to compare:  Diffing with another cart has connection issues. Diff report shows error (table icon with exclamation mark).
    For Schema1 it says
    <schema1>.<table_name> using null connection.
    Unable to compare objects.
    Ensure that you have the required permissions. 
    You must own the objects or have select_catalog_role.
    For schema2 it says
    <user3>.<table_name> using null connection.
    It is trying to find table for user3 although owner is schema2 in cart2

    I am able to reproduce your issues with the diff from cart ui and have filed a bug and identified a fix for it.  The issue is that if the combo box is disabled, it remains disabled and the only way to get it enabled again is to restart sqldev. 
    When diffing between two carts, the connection that is used for the add to cart is used for the authorization so if you add it to the cart from user3, user3 will be used for permissions.  This is the intended behavior.  have also filed a bug for the error message with "null" for the connection.

  • I have a problem with my iPad 1 st. the problem is that I unable to locate even when connected to a WiFi network and the location is activated and restore and same thing happens .. may be I need help!  Thank you ...!

    I have a problem with my iPad 1 st. the problem is that I unable to locate even when connected to a WiFi network and the location is activated and restore and same thing happens .. may be I need help!
    Thank you ...!

    Hi there beni_m,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Printer offline when connected to Time Capsule

    I moved my HP All-In-One C4580 from my office to my home. At home, I use my Time Capsule as my primary wireless router.
    I have followed every step that HP tells me, in terms of removing and reinstalling the software, and still, the only way I can print is to have the printer connected directly to my MacBookPro via a USB cable. I was expecting to be able to use it either wirelessly, like it says it is supposed to be capable of, or with it wired to my Time Capsule via USB. The last piece of advice I got from tech support at HP was this:
    "I recommend you to open the EWS Page of your router and check the MAC filtering option. I would request you to contact Apple for the assistance on the same. The printer works after connecting to Mac using USB cable and the message 'Printer offline' appears after connecting to the Apple Time capsule base station."
    I cannot figure out what the EWS page is, or how I would get to it.

    Thanks LaPastenaue.
    I ran the network utility but only the macbook had a .local suffix.  I'm struggling to understand the info from Netstat to be honest and obviously I'm not keen on sharing my network data with the rest of the interweb.
    I did try moving the TC into the same room as the HH5.  I moved all the connections from the HH and plugged them into the gigabit ethernet ports on the TC and ran one Cat6 from the TC WAN port into the HH, using it as a modem only.  This was not the setup I was hoping for as I am running out of room for kit, but annoyingly, this does give me a solid AirPlay connection on all my devices when on the TC network.
    I did a comparison on each setup with netstat and I see that in the first 'Internet' table that the TC is not mentioned in the old setup(TC in separate room) but is listed in the 'Internet' table when I have it plugged up as above.
    It seems that whenever I have the music streamer plugged in to the TC directly I get AirPlay but if it daisy chained through the HH ethernet hub I get an intermittant and flaky AirPlay connection.
    Any more thoughts?

  • Unable to print images using ENVY 4500 - a red x appears

    I am unable to print certain images and instead see a red x where the image should be.
    This worked fine for a similar image a month ago.
    How can this be resolved?

    Hi there, from what type of device are you trying to print the images from e.g. a smartphone/tablet or a PC/laptop?
    Best
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • TS1398 I am unable to send email when connected to wifi

    HI
    I am unable to send a email when connected to any WI FI.  Have to discounnect from wi fi and then the message will send.
    On Bell in Canada and have set up correct SMTP settings as per bell
    Any help.

    It looks like Bell will only let the iPhone send emails over their cell network, see this thread -> Sending email issues
    You might be able to get some aditional info here -> Bell Customer Support Centre

  • Unable to change permissions when connecting over SMB

    As of OS 10.9, SMB2 is the default protocol when connecting two Macs running 10.9. Unfortunately, SMB2 seems to be half-baked at this time. Among the issues I've encountered, one of the more vexing ones is that it does not seem to be possible to change permissions on a remote file or directory over SMB. In Finder, the permissions section simply says "you have custom access" regardless of the file/folder's actual permissions. Even if I have full read/write access to the file/folder, I have no way to change its permissions.
    chmod and chown also don't work. They don't report an error – they simply don't do anything when I run them on remote files.
    If I connect to the same system via AFP, everything works fine and I can change permissions in Finder, and via chmod.
    Is anyone else seeing this behavior? Are permissions just broken under SMB2?

    So the background to this situation:
    1. The user had OS 10.6.8 installed on one volume, while his actual users home folders stored on a second volume, this is fine but can sometimes cause issues during/post upgrade to 10.7
    2. The user upgraded to 10.7 and while his home folders were still being accessed, he no longer had permission to change or modify them.
    3. The user downgraded to 10.6.4 again which broke the link for his users completely.
    4. In an attempt to change the permissions for his information he had the (common) mistake of changing the permissions of his root level of his drive, this did several things, in addition to negatively effecting his OS, it also locked the drive mount points in his (hidden) /Volumes/ folder.
    5. the steps taken to help rectify this issue:
    A. Open Terminal.
    B. TYPE:
    chmod -N /
    chmod 1775 /
    chown root:admin /
    C. Reboot computer
    D. Open Disk Utility.
    E. Repair permissions on the boot volume.
    F. Also the following commands were run on her second drive to allow him access to his stuff again:
    sudo chflags -R nouchg /path to drive/
    chmod -R 775 /path to drive/
    chmod -RN /path to drive/
    chown -R username:staff /path to drive/
    Once the permissions repair is complete the Users can be readded to the System Preferences>Accounts pane and the paths to home directories located in his second drive using the "Advanced Options..." section, but due to the time the permissions repair was going to take this step will be posted tomorrow.
    Also each user will require Terminal commands to make the permissions unique for each user: (this must be done PRIOR to the users being added in System Preferences>Accounts.
    chmod -N /
    chmod 1775 /
    chown root:admin /
    sudo chflags -R nouchg /path to home folder/
    sudo chmod -R 775 /path to home folder/
    sudo chmod -RN /path to home folder/
    sudo chown -R username:staff /path to home folder/
    EE

  • 10.6.1: Can't resolve FQDN when connecting via WLAN / Airport Base Station

    Hi everybody,
    after hours of work and having read many helpful topics in this forum (and other) I've successfully setup a Single Signon Environment for my home office. It's a dual core macmini server running 10.6.1 and only mac clients.
    The server is connected via switch to my airport extreme base station. This airport station uses PPPoE to connect to my ISP and it has the DHCP service running, handing out the clients' IP addresses. The server and the switch have all static IP addresses.
    My issue is the following:
    Whenever I connect via wifi or vpn using my MBP, I am not able to "bind" to the server (via system preferences : users : login setting) using the FQDN. The error is "can't resolve address. -2200" Instead it only finds myserver.local - and then I am able to set up my wifi connected client.
    However, when I set up the client with the .local address I am unable to get a kerberos ticket for my users. The ticket viewer says, that it can't resolve the address for myserver.mycompany.private
    I was able to get afp or ical to work on my vpn or airport connected clients when I used the server's IP address instead of a domain name - but only with kerberos turned off and with other problems.
    I've heard that if everything is configured right, the server should show up in every clients' sidebar with its FQDN and NOT the bonjour name. Right now it shows only the bonjour name - even on the clients connected via Ethernet.
    The other strange thing is that when I log into my client system I still have to authenticate with ticket viewer in order to get my kerberos ticket. Usually Single Signon should work with the login window, right?
    I really don't know what else to do. I double checked my DNS settings and everything seems ok. I entered the FQDN of the my server in the airport stations' DHCP settings as "LDAP server" - nothing changed...
    Do I need to use the server's DHCP service instead of the airport station's DHCP? And if I do this, how to I turn off airport's DHCP? It does not seem to be possible when connected via PPPoE to my ISP.
    I am unsure what to do in order to get things to work. Anybody out there who can help?

    Hi Davidh and thanks for posting!
    I had 3 DNS entries in my client's network settings - one was the server and the other 2 were from my ISP. Removing the ISP's DNS entries and keeping the server DNS IP solved my kerberos issue. Wow!
    I'd never thought that it won't work with more than the server given as DNS entries. I'll need to check this with my iPhone later, because I had a similar issue with that device yesterday when trying to connect via VPN.
    Thanks very much!
    Still one question:
    The sidebar of my clients still don't show the server's FQDN - but only its bonjour name. Is this right? I read in another forum that the client's sidebar should show the FQDN if everything is configured right.

  • When trying to update the i phone " fault 1630" occurs - both when connected to WLAN or USB. What can I do?

    When trying to update my i phone IOS 5.0 (connected by WLAN and USB to my computer) there is always "fault 1630" saying I`ve got no connection to the internet / network, which seems to be wrong to me (phone is online). What can I do?

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • Unable to print to directly connect printer via USB when on VPN

    We are experiencing and issue when users connect to the VPN and want to print. The printers in question so far are all HP printers J6450, J6500, J4500, F4280. There is the exception of one user who has a J6450 in one office and a K80 in another, the K80 will work over the VPN but the 6450 will not.
    All the printers are hooked up via USB none are wireless so there should not be any issue with not being a split tunnel VPN. The problem is the computer will not communicate with the printer while on the VPN so they cannot print locally, but as soon as they disconnect they are able to communicate and print.
    We have eliminated the possibility of Sophos (our antivirus/firewall) blocking anything by turning any services off, and also completely uninstalling it. We use checkpoint for our VPN. I am just curious if anyone has ran into an issue like this in the past and what they did to rectify the issue.

    Bump

  • Pixelated images when connected 3G

    I've searched all over and seem to not be able to find a resolution for the issue I am having. It also seems I am the only person, I know with an iPhone, with this issue. Hopefully my issue can be resolved through the community.
    When I am connected 3G and view images via apps, Facebook, Twitter, Instagram, etc., they appear to be pixelated and not clear. However, when I am connected via wifi, images are clear as day, non-pixelated.

    Try viewing your images at a viewing % (percentage) of 100% (actual pixels), 50% or 25%.
    Other viewing %'s will make images look pixelated.
    MTSTUNER

  • "Herky-Jerky" video image when connected to "Buddy"

    I have an iBook G4 and just bought a macally icecam. When I am connected to a buddy his image is smooth like a TV but mine is "herky jerky." I tried all I could but can't seem to smooth out the image. I greatly appreciate suggestions.
    Thank you -
    oldjoey and his grandkids.

    Hi
    Have you set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(dont use automatic)
    In ichats prefs click on video and change bandwidth limit to NONE.
    Restart iChat.
    Tony

  • TS3140 Unable to print Images

    When I create a document and add an image or when I recieve a dicument with an image on it, when I attemot to print it does.t print. ALL the writen/typed stuff is included but the image is eliminated!! How can I fix this?

    Hello, what type of docs? What App are you printing from? What exact Printer?

  • Jabber (Movi) 4.4 Mac - Black Image when connecting to Endpoint

    I've noticed that on the Jabber 4.4 for Mac client, when I dial into an endpoint (I use C40, C20, and SX20), occasionally all I see on the client is a solid black image.  The farend does see the person in front of the client.  If you quit the client, and redial the endpoint, it will most likely connect correctly.  I would say about 25% of the time, it requires multiple attempts until the client can display the video.
    I verified that the endpoint was transmitting video.  My search history in VCS shows the call conntected without issue.
    Has anyone seen this?

    Hi Patrick,
    have you checked your antivirus? is it blocking something. try to disable the antivirus and check again..
    collect the wireshark on the pc as well. it will give much clear idea.
    thanks
    alok

Maybe you are looking for