N96 and Navicore 2007

Does anyone have any idea how to get Navicore to work on the N96?
I have Navicore 2006 and the upgrade to 2007 which I used on my N95. I have tried to install it on the N96 but it will not run.
Nokia maps are fine other than for the fact that having paid for Navicore I am reluctant to pay again for voice guidance. Further, Navicore includes traffic and speed cameras.

V5 on N96 runs perfectly far better than v4 20 ever did on the n95
I get a good signal even with a solar reflect screen
the GPS gets a signal far quicker the the n95 ever did
I think it may be how you are using it
The GPS will only work if the card is registerd to the phone otherwise it works on a external garmin GPS unit not the inbuilt N96 one
make sure you have the correct registration details on the card If you copy the aplication OFF the original garmin card to another SD it wil NOT work as there is an alogrithem of the card serial number and the garmin version that activates the GPS each sd card has its own unique serial
Garmin Will be able to help but you may need to buy a new registration if it is on different card
Nokia user / modder since Nokia Orange and Mobira user too before that

Similar Messages

  • Hoping for some help with a very frustrating issue!   I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

  • I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook.

    I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook. When I attempt to sync in itunes I get a popup message asking if I want to delete, Merge or cancel. Not wanting to delete of cancel the only option left is Merge.
                When selecting Merge all of the entries in outlook are added to the idevice. The next time I merge all of the same entries plus any new ones are added, resulting in older entries being repeated i.e an entry like “John’s Birthday” will appear 5 or 6 times on the same date.
                How do I resolve this issue? How do I get the the sync process to add only new entries?

    This is a great question. First, facetime will not work because it has to establish a Call connection first. iMessage should work, but how to get it going I am not sure. Two great Apps to try are, Viber and Skype. Viber is excellent, it works over WiFi, you can make free calls and free text messages all over the world with other users who have Viber installed. It does not even have to be open on screen to work. Viber does have to recieve one text message with activation code, to activate it, this will be your only hurdle, but maybe Verizon can help you get that one text message. Skype does have to be open on screen however, but this can function like Facetime with WiFi connection. Definitely get Viber free in App Store, and put it on all your iDevices so the old Verizon iPhone can function as a telephone when on WiFi.

  • Hotsync problem with Windows 7 and Outlook 2007

    Hello,
     I try to make contact between my Palm Tungsten E2 and outlook 2007 on my laptop with Windows 7 for synchronizing.Before this, I worked on this laptop with Windows Vista and also Outlook 2007.I installed the standard software and after that the update for outlook 2007 (palmoutlook2007conduits.zip (7.2MB)).In Vista this was working well, but not in Windows 7.I can see in the soft ware part that palmoutlook2007conduits is installed, but the in the log book I still have the same errors :
    - Not Synchronized
    Outlook Contacts synchronization failed
    When I go to the settings, also there is the same error : “This version of Outlook is not supported by the Outlook Conduit application. Supported outlook versions are Outlook 98, 200, XP(2002) and 2003.”. It looks like the upgrade with palmoutlook2007conduits have no effect in Windows 7. 
    I hope someone have a solutions for this problem.
    Post relates to: Tungsten E2
    Post relates to: Tungsten E2

    My new computer came with Windows 7 64-bit, and I need to HotSync my Tungsten E2 with Outlook 2007.  Did anyone find a way to do this?

  • XL Reporter with Windows Vista Basic and Excel 2007

    Hi there,
    I am facing a problem with my SAP Business One edition. I am using XL Reporter with my Windows XP Professional Edition and Microsoft Office 2003 and/or 2007, and it works perfectly, but when i try to connect my laptop, loaded with Windows Vista Basic edition and Microsoft Office 2007, it does not support.
    When i try to add IXXLReporter.dll in Excel 07, it does not work, it neither shows me any error or any confirmation message. When i try to run XL Reporter from SAP, it starts process and hangs.
    Can anybody tell me perfectly that whether SAP B1 is compatible with Vista Home Edition or not ...???
    If it works, what changes i have to make in my SAP or Vista or Excel, please inform me soon. . .
    Thanks
    DhanraJ

    Thanks to all of you for replying,
    I have tried all the above given instructions and suggestions. But still m not able to solve my problem. Anyways i have started using this in my another system, but still waiting for proper solution.
    If anybody find answer please reply me.
    Thanks Again,
    Dhanraj

  • Can't sync Palm Centro and Outlook 2007/Windows 7 - please help!

    Hello,
    I've never posted on a forum, but I'm at my wits end...!  I've been trying to get my Palm Centro to sync Contacts/Calendar/Memos to Outlook 2007 on my new laptop for a week now with no success.  It used to sync just fine to my old computer with Windows XP and Outlook 2003.  Then that computer crashed (my Outlook files were backed up on an external harddrive).  I received my new computer with Windows 7 XP (32-bit) and Outlook 2007.  I've downloaded the Palm Desktop 6.2, Windows 2007 Conduit, and Software Update 1.03 (Windows installer) for Centro for Verizon. 
    When I sync my phone to my new Outlook, it completes all 12 steps, but does not load Contacts/Calendar/Memos to Outlook.  This is a list of the error messages:
       HotSync session started on 04/14/10 12:11:25, and completed in 100.0 seconds
     Outlook Calendar synchronization completed with messages
     Duration: 5.4 seconds
     Outlook Calendar
     Please set the option "Enable Synchronization when Outlook is offline" in UI inorder to synchronize in Offline mode
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Outlook Contacts synchronized successfully
     Duration: 0.0 seconds
     Outlook Contacts
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Outlook Tasks synchronized successfully
     Duration: 0.0 seconds
     Outlook Tasks
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Outlook Notes synchronized successfully
     Duration: 0.0 seconds
     Outlook Notes
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Media synchronized successfully Duration: 3.8 seconds
     Backed up some files successfully to Backup Folder 
     Duration: 90.0 seconds
     Backed up 9 file(s) successfully
     AddressingLibRecent-HsCh
     AddressingLibRecent-HsCi
     Messages Database
     PhoneCallDB
     Cookie Data
     AddressCompaniesDB
     psysLaunchDB
     Saved Preferences
     AddressTitlesDB
     Failed to backup 1 file(s) PmTraceDatabase Protocol Error: Handheld file could not be opened. (4004) SYNCERR_FILE_NOT_OPEN
    Can someone please help me transfer Contacts/Calendar/Memos from my Palm Centro to my computer's Outlook 2007?
    I've ready about 3rd party software in posts (Pocket Mirror), but I don't know if it applies here because the Contact/Calendar/Memo information is in my Centro - not in Outlook.  I need to get it from my Centro to Outlook 2007. 
    Any help is greatly appreciated!  Thank you!

    hat wrote:
    I have a Pre Plus and am using CompanionLink software.  If the Centro is like the Plus (which I believe it is) it will not sync with Outlook.  Here is a link to Companion Link:
    http://www.companionlink.com/index.html
    I have been using this and it works great.  On their site you can choose the phone and the particular program you need to sync with and choose which you way you want to sync.
    Hope this helps
    Sorry hat, the Centro has absolutely nothing in common with a webOS device!  It runs PalmOS.  Nice of you to reply with your suggestion though! 
    @SyncHelpPlease:  OLERR errors are covered in this Palm KB article:
    http://kb.palm.com/wps/portal/kb/common/article/31167_en.html
    Something I noticed in your post - you installed Palm 6.2.2 AND the 2007 conduit.  Palm Desktop 6.2.2. has the 2007 conduits built into it already, and the patch is not needed.  Whether this is the cause of your problems, I'm not sure, but I've fielded several posts of the same issue where the user did the same thing you did!
    I'd suggest doing a clean uninstall, and reinstall of Palm Desktop 6.2.2 only. 
    I admit, I do not use Outlook, nor Win7, so I'm giving you my best guess at a way to solve your problem.  Hopefully, this may lead to a solution! 
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Duplicates IPhone and Outlook 2007

    Yo!
    I am continually getting duplicates between my IPhone 4 and Outlook 2007.
    I delete the duplicate from Outlook and re-sync - still duplicated on phone after next sync.
    I delete the duplicate from the IPhone - still get the duplication in Outlook after the next sync.
    I am wondering if the way I make the entries into Outlook is causing the problem.
    Here is how I enter data into my Outlook Contact list:
    If it is a name of a person: I just enter the full name into the "Full Name" field: ex: John Smith
    However, if it is a business or I want to manipulate the name so that it is organized alphabetically, I enter the name just into the "Company Name" so that the "File As" field will display and sort the name alphabetically. Ex:
    If it is "John Smith Plumbing and Electrical", I enter this into JUST the "Company" field. I do NOT enter a name into the "Full Name" field.
    After syncing using iTunes, going through my contact list, I will see a duplicate of the John Smith Plumbing and Electrical contact. One will my original, and the duplicated one will have John Smith Plumbing and Electrical in the "Full Name" field.
    Hopefully I have described my situation clear enough.
    Is there a known fix for this?
    Thanks in advance

    Go to contacts on your phone/ipad, click groups, make sure that the only checked contacts are icloud. That shoud do.
    http://www.youtube.com/watch?v=1UjL9U66G3o

  • Q regarding Acrobat 9 Standard and Excel 2007

    Using 9 Standard and Excel 2007, what settings do I need to change to create a pdf document that looks like my Excel print preview?  Some of the graphs within our excel documents are large, say 3 graphs 5 inches wide each, which are then forced to fit the print area using excel's Fit-to page settings.  When we attempt to convert these to pdf using 9 Standard, the graphs end up 5 inches wide each, and do not fit on the pdf page.  These pages pdf perfecly using Pro 8 but not using 9 Standard.  Unfortunately, I can not change the Excel documents, because we have multiple users, some with 9 Standard and others with 8 Pro, all using the same Excel documents.
    Thanks in advance for any and all replies.
    jim

    Thank you for your reply, however the suggestion did not work.  My original problem still exists:  headers and footers are resized on each page, some so small they are unreadable.  Also (much worse), I did a 'save-as' on a file created in XL 07, saving as XL 97-03.  This caused a 'significant loss of functionality' within my file, affecting 286 different cells.  I often use XL07's =IFERROR formulas which are not recognized in 97-03.
    So... I still have only a partial solution.  Adjusting the dpi settings allows me to successfully convert XL 07 files to pdf, but Acrobat 9 Standard is currently useless, because I can not add proper headers and footers.
    Anyone else with suggestions?  All replies appreciated.
    Thanks
    jim

  • Why can't I download Microsoft Office Home and Student 2007 from my disk?

    I have recently purchased my new Imac and find that I can't download Microsoft Office Home and Student 2007 from my disk?  Why isn't this supported?

    Because it is a Windows version of MS Office. You will need a Mac version, such as listed below.
    http://www.microsoft.com/mac
    Stedman

  • Adobe v9 on W7 and office 2007. cannot create PDF from MS word using Adobe. But can from Excel, PPT

    Adobe v9 on W7 and office 2007. cannot create PDF from MS word using Adobe. But can from Excel, PPT and other MS office apps. Reinslalled Adobe, updated Office, and Adobe no help! Also I can create a pdf from the MS Word and it is using the Adobe 9. So one would think that's good. No it isn't when you need to combine different files to one big PDF document. Any suggetions? Thank you

    Yes, I’m saying that I can in WORD use “Save As ADOBE pdf” but cannot in ADOBE create a pdf file from a WORD (.doc or .docx) document. While I can from other MS Office apps like Excel and PowerPoint.
    I understand I can use “work around” and save doc in WORD as pdf then compile all files needed (xml, ppt, pdf) in the ADOBE v9. to one big pdf document. But that is not the point of this post.  
    Jarda @ PC+NET Solutions
    Mobile 613-532-7023
    Office  613-385-1268
    <http://www.pcplusnet.net/> www.pcplusnet.net

  • Having problems with OPA 10 and office 2007 templates

    Hi,
    I have a OPA 10 and office 2007 set up which is having some issues with the macros. Seems to me that the visual basic code is not kicking off really well sometimes. I am trying to map the sequence which leads to the errors and I believe that the issue is around opening an old word doc which has a old template version (.dot). This may be the cause for OPA getting lost when working with word 2007.
    For example, I ask to open a rules doc and the visual basic tells me that OPA couldn't open the doc but word is opening the doc anyway. However none of the toolbar commands work as well as I can 't save the doc etc.
    Have you experienced any issue with OPA 10 and Office 2007? Any special word configuration? Should i go back to office 2003?
    BTW, I have both dotm and dot templates loaded as add-ins in word. The dotm toolbar looks good but the dot toolbar is a bit strange in 2007.
    Cheers,
    Paulo

    Hi Paulo,
    Have a look at the following tips from Davin Fifield about troubleshooting the toolbar.
    Sometimes when using Oracle Policy Modeling, Microsoft Word documents that are part of a Policy Modeling project may appear without the OPA toolbar (in Office 2003) or OPA options on the Add-Ins ribbon (in Office 2007) when opened in Microsoft Word.
    This problem can be caused by various factors.
    Here are the top three troubleshooting steps to try to recover from this situation.
    1. With your project open in Oracle Policy Modeling, run Update Oracle Policy Templates from the Tools menu. This will attempt to make sure the correct Word template is attached to each project Word document that is not currently excluded from the build. Open a Word document to see if the toolbar/ribbon is now displayed correctly. If not, continue to step 2.
    2. Try changing the UI language for your project. To do this, choose Options, from the Tools menu in Oracle Policy Modeling. Select Environment. Selet General. Under Authoring UI Language, choose a language other than your preferred UI language, and click OK. Then repeat these steps to revert to your preferred language. Open a Word document to see if the toolbar/ribbon is now displayed correctly. If not, continue to step 3.
    3. Open one of the Word documents in your Policy Modeling project. Run the macro UpdateToolbar: In Word 2007, choose the View ribbon, then select Macros/View Macros, highlight the UpdateToolbar macro, then choose Run.
    Does this resolve your issue?
    Jasmine

  • Sync with Vista Business and Outlook 2007

    My old systems we running XP and Outlook 03 but I have recently upgraded to Vista Business and Outlook 2007. Since upgrading I have not be able to get either my contacts or calendar to sync. I have tried everything that I have come across in this forum and elsewhere but so far nothing has worked. I have the latest version of both iTunes and iPhone software. At this point it will not sync in either direction. Even though it says it is syncing it only takes about 10 seconds and nothing actually syncs. Any input would be greatly appreciated.

    If possible create a new user
    Once in the new user, Launch iTunes and Set it up
    Close out of iTunes
    Launch Outlook set it up without Email support so Outlook 2007 will be open
    Once this is done Add at least 1 contact and 1 Calender Event to Outlook 2007
    Once this is done assuming your iPhone has contact and Cal information on it, Go ahead and go into ITunes and Set the Info Tab to Sync to Outlook for Contacts and Cals, And report what happens.
    If this works. Then there is an issue with the Data in Outlook on other account.

  • Word 2007 and Outlook 2007 error 1605

    Hi,
    I keep getting this error with Word 2007 and Outlook 2007:
    Microsoft Office word can't open thesaurus. Windows Installer error 1605.
    Please advise on how to fix this.

    Thank you.  Thank you.  Thank you.  In all my searching for this problem, Yerger's was the only one that made much sense.  And it worked!  I no longer get an error when I open Outlook, and now I have my thesaurus back in Word!. 
    I suspect it will also fix the problem I was getting sometimes in Word that some kind of proofing tools were not available (although that was intermittent so I can't really tell for some time.) 
    Your solution was easy to follow and I like the explanation.  I am usually suspicious of making changes to the registry based on an unknown person's suggestions.  With this I could easily see that it was the relevant key.
    For those not sure how to edit their registry:  From the Start Menu, select Run, and type in regedit
    Thanks!

  • Type of Video Display "Out" Port on Mid-2006 and mid-2007 MBP's?

    Howdy
    The subject line above kind of says it all. I would like to know what type of video out port exists on these two models of MBP's: mid-2006 and mid-2007? In other words, what kind of Apple adapter would I have to buy to use these ports? Mini-DisplayPort, etc.?
    Thanks!
    DaveW

    Kappy, thank you for your fast reply. But, I am puzzled by it. A standard DVI port is rather Large and has many pins and the crosswise electrical flat pin. Are you saying that this large type of standard DVI port is present and physically fits on the edge of a Mac Book Pro?

  • Lion OS 10.7 and Quicken 2007 - Investments

    Ashland A
    In your transition to SEE you do not mention transfering a history of investments. This is an area where many of us
    have been left out. Did you transfer a long history (10 years +) of accounts with activity to SEE?

    Quicken Essential does not support investment tracking.  I have over 15 years of checkbook, stock/fund investments and Quicken 2007 tracks all my costs, gains, lots and exports that data to TurboTax at Tax time for my schedule D.  Spreadsheet Solutions don't support bill pay as Quicken 2007 does.  I simply enter the transaction into my quicken register, enter SEND instead of a check number and Quicken transmits the payment request to my bank.  No double entry and no requirement to use my bank's web bill pay.
    I can draw a net worth chart going back to the early 1990s because ALL my accounts and assets have been tracked since then in Quicken version up to 2007.  Unfortunately, I'm held hostage by their database format.  I don't know of any management tool that completely accepts a transfer of all my Quicken data.

Maybe you are looking for