Nano screens are delayed when clicking through

Hello
My Nano has had this issue and I don't know if this is normal or not. When I click through screens, often the next screen is delayed in popping up like a hesitation. I think it is more noticeable when a song is playing.
When I click the next screen it sometimes hesitates, then the whole screen appears redrawn. Is this normal operation for these ipods? I think I only am noticing it recently.
By the way I just updated to iTunes 7 and restored my ipod to factory settings. But I haven't seen any difference.
Also in previous versions of iTunes, if your library was bigger than the ipod a dialog box came up asking if you wanted iTunes to automatically create a playlist for you. There doesn't seem to be this option in 7, only a box that says there isn't enough room!
Nano 1st generation Mac OS X (10.4.7)

For the messages in iTunes when your library is too big: That could just be a software change in iTunes related to the new way to update your iPod in iTunes 7.
For the lag: How long is it taking? The iPod might not respond instantly, but it shouldn't take longer that 1/2 second to 1 second to respond if the iPod isn't doing anything. If it's doing something (you just disconnected it from the computer, loading notes, sometimes music, etc) then there might be a short delay.
The iPod shouldn't be stalling to the point where it stops in between switching menus.
btabz

Similar Messages

My ipod nano4th gen will not download the purchased songs in itunes v11. Just upgraded to mac 10.6.8-won't synch new songs since this upgrade. The ipod is seen in the itunes as the devise, and the nano screens says synching when plugged into the macmini

my ipod nano4th gen will not download the purchased songs in itunes v11. Just upgraded to mac 10.6.8-won't synch new songs since this upgrade. The ipod is seen in the itunes as the devise, and the nano screens says synching when plugged into the macmini usb port, but the itunes window does not say it is synching like it has before so whats the culprit? Techno virgin in distress!
PS - I added an iphone5 which is whay these upgrades happened so this synching to the ipod error is since the iphone began synching.

I just learn in some post that the most common lapses in syncing is not checking if "sync music" in music section of the ipod is ticked. So double check if it is. Cheers!

When clicking through a yahoo photo gallery, firefox freezes into a white screen.

On Windows 8. Problem only started with latest release of Firefox. When I click on the white screen I go back to the page that has the gallery but it reloads from the beginning. Clicking through a second time it goes further into the gallery but inevitably freezes again.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

New windows in Firefox 29 on Windows 8.1 don't open fully maximized when clicked through a link

New problem in firefox 29:
When I click a link that opens the new page in a new window, the window pops open in the last partially maximized state that it was in. Should I maximize the new window (in Windows 8.1) and close it and re-click the original link, the window opens again in the partially maximized state, not the last fully maximized state that I previously closed it in.
To create it as I've encountered it:
-go to https://news.google.com
-click on any article. the default behavior should be to open the article in a new window
-the window won't be maximized in my experience
-you can maximize the window and then close the window/ article
-re-click on the same article and the new window should appear again in the non-maximized state, not the fully maximized state that you closed it in previously
One point of note. Right-clicking the same link that opens the new window and specifically choosing "Open Link in New Window" DOES open the new window in a fully maximized state. I repeat, the new window does open fully maximized when you choose "Open Link in New Window" from the right-click drop downs menu. But, this doesn't happen with the simple left-click, which I'm concerned with.

Reverted back to version 28.0, 29 just isnt working, layout is a mess. (Ok i got the old layout back by installing and setting up Classic Theme Restorer, but once you remove the orange title bar, the screen resize bug appears.) Also its a very bad thing such a large graphical overhaul took place without prior notice. If i wanted google Chrome i would have just installed that, dont need FF to provide me with it. Might upgrade again if bugs and layout are changed, otherwise ill stay with 28.0 or maybe start using Waterfox.

Screen Painter error when click or moving objects

Hi all,
from the last two or three releases of SAP B1, i get an error when i try to click with the mouse over a control in screen painter.
The object over i click on, become very large (width = large int) and the same with the top property.
Any suggestions ?
Thanks in advance.
Fausto.

Fausto,
Have you tried uninstalling and reinstalling the screen painter?
Eddy

Why is there a video delay when mirroring through HDMI?

Since I installed Mountain Lion, I am experiencing a delay of about 0.5s on video that is ouput through the HDMI port vs. the image that is showing on my screen.
Not only is it very distracting, since the cursor on the external display lags behind my motion on the trackpad, but the delay between the audio playing through the MacBook's speakers and the video playing on the external display destroys the viewing experience.
I'm wondering if anyone else is experiencing this. It only occured after Mountain Lion.
Sherif

Have the same problem with 42' LG TV. I have tested a few different HDMI cables without any success.

~10s delay when clicking on links before loading begins

I am having a delay of around 10 seconds after clicking on links before loading starts. On some websites it is worse than on others, worst being on reddit.com. I already tried resetting firefox but that didn't help. Thanks in advance for any help.

Did this occur when you didn't have the "Stealthy" extension installed, or does it make any difference if you disable it?
To rule extensions in/out as a potential culprit, you could try surfing for a while in Firefox's Safe Mode. That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

6th gen iPod Nano screen turns white when connected

I just got my replacement Nano for the 1st gen Nano recall. I plug it in to sync and the screen is white. Sync finished and I unplug it. I remove the dock connector cable and the homescreen appears, but is almost in a mirror like state. The screen is in the correct orientation, but the letters are backwards and hitting the lets say radio app opens the music app scrolling down, scrolls up, etc. Sleep-wake fixes the issue. Plug it in again and does it again. Restore it. Doesn't fix it. Hard reset, doesn't fix it.
Playing with it a bit, it seems to be an issue with the dock connector. I wiggle the cable and the screen turns white or goes to that mirror like state until I sleep/wake it. Unplug it, screen goes white/ to mirror like state until completely unplugged. In any case, if I touch the cable and wiggle it, the screen goes between white and mirror state.
Will an Apple Store replace it or do I need to send it in since it was a replacement program?
Thoughts?

You have 90 days warranty on your replacement Nano, see if you can visit an Apple Store or get it serviced.

When clicking "open in new tab" a link that is on the bookmarks toolbar, but hidden (meaning that they are visible when clicking on arrows on right side) nothing happens. Actually all right click features do not work on those "hidden" bookmarks.

I have lots of bookmarks on the bookmarks toolbar, so they some are hidden on the right side, you have to click on those arrows in order to reveal those, and that's were I found out that right clicking on any of those bookmarks does not have any effect.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Word documents are garbled when sent through Outlook Exchange. I know something in the profile folder gets corrupted. Anyone know what?

Our school district uses the web based version of Outlook Exchange. Several of us using Apple computers have had problems when sending word documents as attachments. When received, the document is full of garbled text. This has happened with different model computers, running 10.5.x or 10.6.x. I determined that removing the items from the folder in profiles (Users-> <user> ->Library->ApplicationSupport->Firefox->Profiles-><profile folder>) the problem is resolved. However, all preferences for Firefox are then lost. Does anyone know what specific item in the folder would cause this?

I think this is an excellent indicator that not only is Palm reviewing the feedback from the support forums here, but actively reviewing feedback/comments/wishes on other sites as well.
As the original poster copied this (quite solid, IMO) wishlist from Pre Central, the palm support staff acknowledged first seeing it there.

Size of Photoshop screen so small when downloaded through Firefox

On the search bar the max/min icons are small and I would like to have them larger. Also the Photoshop download I am getting, all the tool icons etc., are all very small and need to be bigger. The whole workspace configuration is small.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB

When left screen goes white when click on any tab

If i leave any tab for a while then click on it all firefox 4 goes white

If i leave any tab for a while then click on it all firefox 4 goes white

State not changed when clicking on bound JCheckBox (10g, JClient)

I have a JClient Panel with a JCheckbox bound to an attribute, and Selected / Unselected State Value set in the Boolean Binding Editor.
The checkbox correctly reflects the values in the DB when navigating through the rows. But neither the state of the checkbox nor the attribute values are changed when clicking the checkbox. What am I missing ?

Hello Pascal,
Many thanks for your "dead checkbox" solution!!! I ran into exactly the same error. (Oracle have not acknowledged this as a bug in spite of your May message?!)
Regards Sten
PS My conversion to ADF of my JClient medicare application has been really awful. So much is undocumented - both the correct coding technique and the bugs. Hope you are doing better!

Cs5 freezing when clicking between applications

flash seems to crash/freeze when clicking through to other applications.
anything that can be done????? i cant get any work done becuase its crashign all the time.

Hi,
Does this happen even if you have a blank FLA file? Or, does it seem to happen with larger files?
Are you on a Mac or Win? Did you get a crash log?
Thanks,
Nivesh

Delay when using Airport Express

a friend hooked up an airport express yesterday in a place with a few macs - there seems to be about a 2 second delay when clicking on any mp3 song in itunes. Is this normal?
Any way to reduce the delay?

Thanks snives,
You're talking about Airtunes right
Yes, Airtunes.
Try to not let it bother you.
Just can't use it for professional timing needs - so useless for us...
Alternative wireless methods would be to transmit raw audio using another device
* interesting - what other device are you thinkng of?
or use an audio cable if that's possible in your situation.
already tried that - works fine - but don't want the cable

Nano screens are delayed when clicking through

Similar Messages

Maybe you are looking for