Nano2g works on all PC's but mine!!!

When I plug my Nano2G into my PC it is not detected by Windows or ITunes and only charges.
I can't get it to be detected through any of my USB ports and resetting the ipod does not help.
I've got it to work perfectly with my brothers PC and laptop, so it must be a problem with my PC but I can't work out what!
Any help will be greatly appreciated.
iPod nano (Second Generation)   Windows XP  

iPod missing in "My Computer" or in iTunes for Windows (There are several links within this article that may help also...including the one below which has helped many that have posted about this problem)
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

Similar Messages

  • Hi I am using iphone 4, since last few days i am facing problem in touch screen at times it doesn't work at all for 5-10 mins and then it works out itself. Can anyone pls suggest what the problem is and how it can be sorted out?

    Hi I am using iphone 4, since last few days i am facing problem in touch screen at times it doesn’t work at all for 5-10 mins and then it works out itself. Can anyone pls suggest what the problem is and how it can be sorted out?

    Did you recently updated to 7.0.4? Even for me same also issues.

  • My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

    My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

    about message http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755

  • TS1398 my iPod 2 gen says that I'm in range for wifi, but does not allow me to use it after all the times i have tried. it works on every other device, but mine. Need help please?

    HELP

    Have you:
    - Tried another network?
    - Does the iPod see the network?
    - Tried a reset.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Powered off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Setting
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Changing the encryption on the router?

  • Buffalo Linkstation works with all PC's but not iMac - With Airport Extreme

    Hi. I hope someone can help. Been at this for days, even AppleCare can't help....
    We have a Buffalo linkstation hooked to a new Airport Extreme.
    All PCs can see it and view documents, iTunes, etc. My iMac cannot. Actually, I think it sees it but it's a mere file on my desktop. When I click on it, it pulls up a Finder type window, but this Buffalo icon (like network icon) can't be mounted in my normal finder main section. I can't figure out how to do that.
    When I open Finder, I don't see the buffalo at all but have to go thru many libraries to find it. When I click on it ("connect") to it, It says "Select the SMB/CIFS shared volume you want to connect to: I click on the name, but it says "the alias blablabla could not be opened because the original item cannot be found. It gives the option to fix alias so I hit that and it puts me in my "documents" area and won't let me go anywhere else.
    OMG... Can someone tell me how to get this thing working? I can see the files but they are so buried. I'd like to take this Buffalo which seems to be on my desktop and mount it? to the right area of my Finder.
    All I want to do is see the darned iTunes on the buffalo wirelessly via airport extreme. LOL All other computers (PC's) did this instantly. Help?

    Yes, I can see everything I need to see (external HD)....
    I even dragged the darned thing into the finder...
    Now my upper left box of the finder says:
    Network
    Share (that's my external buffalo HD)
    Windox XP
    iMac
    The problem with the above is that "Share" is not mounted. It has the eject button next to it. I think (maybe) I could get this functioning if I could mount this darned thing but I can't for the life of me get it to do that. Any ideas?
    EDIT: I'm not sure how to use directory access utility. Do I need to?
    Message was edited by: meagain1

  • Time Capsule works with all other computers but 1 not working

    Ok so I have read all the posts and fixes. I have checked the permissions and ran the fix disk with no errors. I get a failed to backup evertime I use my iMac but my Air works fine can figure out what I should do from here. I am really leary to erase the whole thing and start from the begining.
    HELP!!!!!

    The below is from buddy. The ``` are the removed name.
    Starting automatic backup
    Attempting to mount network destination URL: afp://```````%20`````````;AUTH=SRP@````````%20Time%20Capsule._afpovertcp._tcp.l ocal/Time%20Capsule
    Mounted network destination at mount point: /Volumes/Time Capsule using URL: afp://``````%20``````````:AUTH=SRP@%`````````20Time%20Capsule._afpovertcp._tcp. local/Time%20Capsule
    Disk image /Volumes/Time Capsule/``````````iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to /dev/disk7s2: /Volumes/Time Machine Backups/Backups.backupdb
    Failed to create progress log file at path:/Volumes/Time Machine Backups/Backups.backupdb/`````````````iMac/2014-03-23-214814.inProgress/.Backup .417318494.901702.log.
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (Error Domain=NSCocoaErrorDomain Code=512 "The file “4D456848-AD8C-4812-A098-7ADAE3BA1154” couldn’t be saved in the folder “2014-03-23-214814.inProgress”." UserInfo=0x7fa9e497c270 {NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/`````````````  iMac/2014-03-23-214814.inProgress/4D456848-AD8C-4812-A098-7ADAE3BA1154, NSUnderlyingError=0x7fa9e497bce0 "The operation couldn’t be completed. Input/output error"}) Creating directory 4D456848-AD8C-4812-A098-7ADAE3BA1154
    Failed to make snapshot.
    Backup failed with error 2: 2
    Ejected Time Machine disk image: /Volumes/Time Capsule/``````````` iMac.sparsebundle
    Ejected Time Machine network volume.

  • OBIEE - Filter SQL Expression Not Working At All - Shows SQL But Not Result

    Im at my wits end for this
    I have a report where I am using a filter with a simple SQL expression
    cast ( timestampadd(SQL_TSI_YEAR, -1, Cast(Cast(DATE '@{pv_as_of_date}{2013-04-01}' AS CHAR) AS TIMESTAMP) ) as DATE)So an end user may input a date and this is passed into the filter via a variable
    pv_as_of_date
    This is defaulted to 2013-04-01
    I want to subtract 1 year to make the end result
    2012-04-01
    When I run the report I am seeing two issues
    1) When displaying the filter at the bottom, I see the full SQL code. Shouldnt this show the date returned? In this case shouldnt the filter show 2012-04-01?
    2) The filter does not even work which is my bigger problem
    I tested the above code in a column and I KNOW that the date is being returned as expected
    But when I use the same SQL code in the filter then it doesnt work
    Am I missing some special button some where to enable SQL expressions?
    Any help immensely appreciated

    Ok
    So I was able to find an option "Protect Filter" that seemed to make a bit of difference and I got the date part working after using the above corrected code (thanks)
    But now I want to add in the rest of my filter conditions and it does not seem to be liking it
    Im trying to use this filter
    'Acad ' || cast ( cast (substring ('@{pv_acad_year_desc}{Acad 2013/14}' , 6, 4) as integer) - 1 as char(4)) || '/' || cast ( cast (substring ('@{pv_acad_year_desc}{Acad 2013/14}' , 11, 2) as integer) - 1 as char(2))Im expecting the output to be in this case
    Acad 2012/2013
    When I test the above code in a column it works just fine, its just again in the filter that it isnt working

  • My Apple TV does not recognise My iTunes password. It works on all other devices but not Apple TV? Any ideas why or how to fix?

    Any ideas why my Apple TV does not recognise my iTunes password, when all other devices, including these communities are good with it?

    Hi Mick2291,
    Thanks for visiting Apple Support Communities.
    I'd suggest restarting, and then restoring, your Apple TV if the issue persists:
    Apple TV (2nd and 3rd generation): How to restart your Apple TV
    http://support.apple.com/kb/HT3180
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Best Regards,
    Jeremy

  • My husband's gmail account works fine in standard view but mine has to be put in HTML only to keep it from locking up.

    My husband has had a gmail account for two years. When I switched from IE8 to Firefox 3.6 last week the account switched over with no problems. Loads and runs normally in standard view. I created my own gmail account yesterday and if I can't use it in standard view. It won't let me reply, open settings, sign out, etc. I can open emails and use the "back to inbox" button but clicking anything else locks up the whole browser. The only way around this issue is to switch to "HTML only" view which I don't particularly care for. Any idea why? I also added my ISP's McAfee security suite after switching to Firefox last week. I'm not getting an error message from either one but my ISP assures me that the problem isn't the anti-virus software. Any idea what could be causing this and how to fix it?

    Settings > iCloud > Delete Account will only delete his account from your iPad. Then you can add your own.

  • White screen of death from game.  And a new game not working at all

    My iPod touch 4th gen has been getting the white screen of death when I try to play plants vs zombies why does this keep happening and is there a way to stop it from happening again?
    And I recently installed fruit ninja and it won`t work at all it opens but it just says loading and then it crashes and I've tried running it in safe mode and it still dies the same thing what can I do to get the game to work?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Drag and drop feature on the project panel doesnt work. Cant adjust scale or any numer properties by sliding mouse. (click drag wont work at all nowhere)

    This issue just happened out of the blue. The last thing I did was create a new comp and import an Illustrator file.  Working on CC2014. Its like the mouse's left click wont be working at all... but that's not the case.  Cant even drag the comps in the composition, or move the layers around....
    Now the issue affects everything I do in After Effects, even on a new comp with just a plain solid
    Deleted cache,
    reseted workspaces,
    open/close after effects
    restarted computer
    newcomp with just a solid and nothing.
    plugged unplugged wireless mouse
    changed to wired mouse
    the issue is still there
    Curiously, after writing this post , publishing, and going back to after effects, the mouse will work, but for a couple of clicks or so then wont work again. This only happens on After Effects
    Mensaje editado por: Oswaldo Montúfar

    You're Right
    Its an Gigabyte GA-Z68XP-UD4   with an i7 k2600 clocked to 4.2ghz   w 16gbRam at 1333mhz
    Dual GPU , gtx 760 and gtx 780ti
    Running Windows 7 ultimate.
    The keyboard is a Genius G110  plus a wireless mouse Genius also.
    Adobe guys tried resetting cache (different than deleting) and user preferences, creating new user, disabling both video cards . The issue was still there.
    BTW!, After I switched windows in Win7 environment ( from after effects to the browser)  the mouse drag worked again. I could move objects in comp window, scale; move sliders on time line and drag projects to folders in project window... everything fine until i pressed ANY key, say, shift key or ctrl key.
    Probably we will never have the answer for this, since i had to format the C drive  (i have work to do). Currently i'm installing CC again. So if problem persists, I'll ditch the computer through the window.

  • The JS statement document.getElementsByName("PME_data_myfield").item(0).outerHTML=""; is not executed in FF, it works on all other browsers

    I am trying to remove an input element from a form with the above statement in a javascript. It works on all other browsers but not on FF. It does not generate an error either. Instead of removing the item it just seems to be ignoring the statement.
    I remove the element with the above statement and then re create a new one with document.createElement. In FF it duplicates the element.

    Firefox only supports innerHTML and not outerHTML, so you need to use other code for Firefox.
    See e.g.:
    * http://snipplr.com/view/5460/outerhtml-in-firefox/
    * http://stackoverflow.com/questions/1700870/how-do-i-do-outerhtml-in-firefox

  • Embedded youtube videos load on all other browsers but not Firefox

    I have embedded youtube videos into a website...
    They work on ALL OTHER BROWSERS but not on Mozilla Firefox.
    I have tried:
    1. Clearing cache & cookies and using Safe Mode.
    2. 18 different computers running Windows 7, Windows 8, Mac OSX, Linux Ubuntu 12.10 and Fedora 16.
    3. Using old embed code instead of iframe.
    4. Loading HTML5 works but Firefox cannot fullscreen (still under youtube development)
    5. Redoing site from scratch.
    Code is as follows, note middle video is old youtube code: http://pastebin.com/T3w09bqW
    Picture of problem: http://i.stack.imgur.com/rJjyu.png

    Good point. When I insert that snippet of code in a new page, it runs for me. (Except that the first one says the frame is too small.) Does this work for you? http://dev.jeffersonscher.com/yt/941211.html

  • Hi, i ve just brought a new pc ,we have transferred all our files but for some reason my daughters litunes library works , but mine does nt , its there but you cant play any songs from my list. my nano is older than my daughters. can anyone help?

    hi, just brought a new pc i have transferred all the files, but cannot access my itunes library to play music on the pc, its on the pc , but it wont let me play music. my daughters library works though, but she has a newer model than mine. how can i access my old library? at the moment the pc says all i can do sync my ipod , but that means clearing my songs and having my daughters library imported to my i pod thus losing my songs. is there anything i can do to restore my library?

    iPod Nano: Multiple Users- Single iTunes

  • My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does no

    My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?

    If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
    Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
    An Internet connection will be required (wired or wireless).
    At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.

Maybe you are looking for