Narrow down search to a specific page?

Hello,
How can I narrow down a search to a specific page in a PDF document?
For instance, I want to search only page 5.
How can I do this?
Is there any documentation that specifically tells you how to narrow down a search to a page number?
Thanks
Linda

Actually, I need to find a particular page before I do a search on it.
My problem is that I need to search a specific book mark in a large document, however, the particular name of the bookmark appears three times and I want to search all three of these bookmarks.
Currently I am using the following to narrow my search to a specific bookmark:
if (global.mainDoc.bookmarkRoot.children[i].name.indexOf("XYZ")!=-1) {
// Do something
Unfortunately there are three bookmarks with the same name of XYZ and my search only goes to the last bookmark named XYZ.
I need to know how I can also search the other two bookmarks named XYZ.
The three same named bookmarks appear one right after the other.  Since I am able to search the last of the same named bookmarks, I would like to then go to the previous page and search that page.  Similarly I would like to go to the previous page before that one and search it as well.
I could obtain the number of the last bookmark named XYZ, subtract one from that page to obtain the previous page, and if there is a way to narrow a search to a page number I could search that page ,with the bookmark named XYZ, as well.
Any help is greatly appreciated.
Thanks
Linda

Similar Messages

  • Custom search in a specific page

    Oracle 9iAS R2
    Hi,
    I'm using custom seach portlets to provide teasers for the extended content placed in several content pages created in the same page group.
    As an example, there are two distinct pages (ContentPageA and ContentPageB) containing several "News" items each. "News" is a custom item type similar to the "text" item type. Users that can enter content in on page are not suposed to include content in the other.
    Then I place a custom search in the "Home" page customized to autoquery contents in "ContentPageA" and show only the last five items created. A link placed elsewhere provides access for the original page for users interested in complete content. The same is done for "ContentPageB".
    My problem is that I want to specify the custom search to search exclusively in one page and not the other. I know I can use categories or perpectives to make the distinction of the content, but I cannot force users to choose the right attributes. As a result, a search for the last five items would bring the mixed items from each page, which is not desirable.
    If autoquery is not in use, one can define the specific page for performing the search. How can I specify that in the autoquery mode???
    Thanks for the help.
    Joao

    The ability to pre-select a page to search in is planned for a future release.

  • Muse search bar to specific page

    Hello,
    I am very new to Muse, and so far its been great. This is also my first question on Adobe, so please take it easy on me if I've done anything wrong.
    So, here's what I want to do. I am designing a website where I can give a customer a number (such as an order number) and they can type that number into a search bar, and bring up a page with information about their product (eg, is it finished, has it been shipped, and so on.) By using a simple number, and not including any personal information, I can allow my customer to look up their product, without having to log in. Similar to how a UPS tracking number works.
    So, here's my problem. I have no idea how to do this. I don't know how to make this search bar, and I don't know how to link the numbers to the information. Should I create a new page with for each number? Is there a widget somewhere in the depths of the internet that would allow me to do this? Do I have to suck it up and force myself to learn HTML? So many questions.
    Thank you very much for any help you can provide. I am not a graphic artist, in fact, I'm a biology major. I'm lucky enough that my school has computers filled with Adobe software that I sneak in and play with, but I'm far from an expert.

    The only way you would be able to do that in Muse would be to create each page for the clients manually and send them the direct link. As an alternative you could use Business Catalyst as the host and use the tools with in Business Catalyst that do exactly what you need. There is a bit of a learning curve to that though.

  • Is there a way to search for a specific keyword within the sites to which the bookmarks are linked? I need to search all linked sites in the bookmark folder without having to open each page and "find" manually.

    Currently, I must browse through 50 or so bookmarked pages to see if a specific topic is covered. I would like to be able to search all bookmarked pages at once for a specific keyword. For example, if I have 50 news sites bookmarked and I would like to see which pages have the word "tuna" in them, I would need to open each page individually and do a "find". If I could search all of those pages at once, then I would save an immense amount of time. I have looked on the add-ons and found nothing...

    1. Create a smart album and in the drop down in the top right corner select file status
    2. Check mark the file status box and select 'Offline'
    Now you should have all your 'Offline' (Yellow Exclamation and/or Red Slash) files.
    To reconnect..
    1. Select the missing files.
    2. Go to File and scroll to Manage Referenced Files
    The dialog box will have one of the photos selected
    3. Select the drive and folder that contains the referenced file and select it
    4. Click 'Reconnect All'
    This might not reconnect all of them, but the dialog box will still be open and you can reconnect the ones left.
    Narvon
    Message was edited by: Narvon

  • How can i print specific pages against searched word or name (in one print command) from 1000 pages

    how can i print specific pages against searched word or name (in one print command) from 1000 pages

    Thanks, Alex!
    ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
    I don't try second approach, because at this time I have only one report
    I try also with VB macro: this is better (print3.vi) but.....if I use:
    Sub Print_Pages_From_To()
    ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
    End Sub
    is ok; print the pages selected; if I use:
    Sub PrintPages()
    ActiveDocument.ActiveWindow.PrintOut  Pages:="2-3"  
    End Sub
    printer print all pages.
    what do you think?
    regards,
    Italo
    Attachments:
    print Problem.jpg ‏39 KB
    print4.vi ‏19 KB
    print3.vi ‏19 KB

  • Problem while opening a link of a PDF that points to a specific page to another PDF

    PDF links whose URIs include backslashes are interpreted by Acrobat Reader browser plug-in as local file-system links even when they are not.  This means that a link that points to a specific page number will open the file but not automatically jump to the desired page .  In our browser-based viewing tool, this means that the links are perceived as not working.
    for example :  from IE Browser When we tried to open the link in PDF 1 which has the URL of the 5th section of PDF2 and the URL includes the backslashes then the Specific section of PDF2 is not getting opened . The link just opens the PDF2 first page. This Specific problem does not arrives if we try to open the link through Adobe Reader or if the URL mentioned in the PDF is formed using  forwordslashes instead of backslashes.
    Regards
    Yeshwant

    > not sure if i have explained this very well.
    You have not.
    But tables cells cannot wrap.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "cheers mate" <[email protected]> wrote in
    message
    news:e7obon$nim$[email protected]..
    > lets say i have a table one row deep and 10 columns
    wide, and while
    > viewing it
    > your window may allow only 3 of the first tables at the
    top and three on
    > the
    > next and three the next and finally one on the last.
    (the number of boxes
    > is
    > not an issue)
    >
    > the way the tables are shown is.
    >
    > lets say the window is resized to allow 4 boxes in the
    top row and so on
    > down
    > the page till all boxes are shown.
    >
    > not sure if i have explained this very well.
    >
    > if you do not understand please ask and i'll create a
    few pages to explain
    > what i am trying to do.
    >
    > i have seen this once or twice around some sites, but
    this was ages ago
    > and
    > have no idea what sites so i can not look to see how
    they did it.
    >
    >
    > please take a look at this link i have described what i
    am trying to do.
    >
    >
    http://pro-freelancers.com/cascadingboxes.htm
    >
    > Hope someone can help.
    >
    >
    > thanks
    >

  • Safari hangs while opening specific page

    So when I try to open one specific page (which is working because I could open it with Google Chrome) safari hangs in the middle of the blue bar and I can't open any other pages, it's like the internet had stopped working
    I already tried to reset it, deleted the files in the hidden library, disable plugins etc
    any ideias? Thanks
    PS: I'm using Safari 6.0.2 and Mountain Lion 10.8.2

    Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Narrowing down by keyword

    The apple help site says this To find photos that contain a specific keyword:
    To display photos that contain a specific keyword, click the keyword in the Keywords list. You can select more than one keyword to narrow your search.
    To hide photos that contain a specific keyword, click the keyword in the Keywords list while pressing the Option key. You can select more than one keyword to narrow your search.
    This does not work for me in Iphoto 5. When I select more than one keyword, it just shows every photo that has any of the keywords selected. I want it to only turn up the photos that have all of the selected keywords.
    How do I do this?

    Any suggestions would be appreciated
    You could use the specified find command (Cmd+F or menu Edit/find) and from
    this menu choose keywords and add the next by using the plus sign for the
    combined search and make a choice for the criteria method in the bottom
    section from this menu.
    An other option is to use the filter panel when you have found the files
    containing one of those words you can narrow it down by selecting all the 3
    mentioned criteria, in this way Bridge content window only shows the ones
    that meet all three filter criteria

  • Best way to handle a email subscription and narrow down the emails.

    We are using SCOM 2012 SP1 and have everything updated to UR5.
    We have 2 groups defined.   Machines with names starting with Corp- and Prod-.     We have a subscription to notify on errors with this group.   We get many different alerts that are not necessarily important with
    this subscription so we want to  narrow down the focus.
    We would like to use these two groups but only send out notifications when certain types of events happen like
    CPU utilization is too high or   logical disk space on C: drive is low (dont care as much about D: or E: etc).
    Is there a way to do this with criteria set to specific rules or monitors?
    Thanks Lance

    1) In the 'Subscription' Page there is a criteria "created by specific rules or monitors', use that.
    Get the rules/monitors that generate disk space and other alerts that you want and select them in the above mentioned criteria.
    2) to identify from email weather its for a CORP or PROD server, go to Channels tab and create two email notification channels one for each corp and prod. from the 'Format' page , just add "CORP:"  and "PROD:" in the beginning of the "E-mail subject:"
    option.
    Hope this helps.
    Thanks, S K Agrawal

  • When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

    When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
    'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
    I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
    HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
    http://www.musicstudentsforhire.co.uk/musicians-samples.html
    It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

    I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

  • How do I open a PDF to a specific page via the command line?

    Several questions about opening PDFs from the Mac OS X command line:
    1) How do I use the "open" command to open a PDF to a specific page? (I know I can open a document via: open doc_name.pdf)
    2) How do I use the "open" command to pass multiple arguments (page no, zoom scale, view mode, etc...) to open a PDF file in a specific manner?
    3) Does Preview handle the same parameters as Acrobat Reader? If not, what are the differences in options?
    I've spent hours searching for this answer and have come up dry. I've downloaded Adobe's "PDF Open Parameters" document -- it lists all of the parameters I need, however I can't get any of them to work from the command line.
    My goal: Open a PDF from the command line to a specific page. At first glance, I thought this would be simple to do and find -- however, after a lot of searching I haven't found an example on how to do it.
    Anyone have any experience doing this, and care to share?
    Much appreciated! ---> Kelsey

    I don't know of any way to do what you want using the 'open' command. It can probably be done with Applescript, which you could call from a shell script. The Preview application doesn't seem to be scriptable. I don't use Acrobat, so I can't tell you anything about that. Looking through the dictionaries of the apps I do have, it seems that Skim (another PDF viewer) has an AS 'page' class. Below are a couple of links that may get you started. Look for more specific guidance in Applescript forums.
    http://sourceforge.net/apps/mediawiki/skim-app/index.php?title=AppleScript
    http://links.tedpavlic.com/shell_scripts/skim

  • How do I search for a specific word in the code using Dreamweaver?

    I need to search for a specific word in the code for all of my website pages. How can I do that using Dreamweaver?

    To search local files of a Defined Site in DW...
    Open the Find & Replace tool with Ctrl + F
    Change the Find In dropdown to Entire Current Local Site
    Change the Search dropdown to Text or Source code
    Add the text to find in the Find field
    Add the text to replace in the Replace field (or nothing if you just want to delete the text)
    Hit Replace All

  • How do I go to a specific page in full-screen mode?

    I've been using page for almost 3 months now and always jumped to the top of the document and clicked on my TOC entry to get to the start of whatever chapter I wanted to write or edit. Today, I decided it would be faster to just use Cmd-G, like I would have in MS Word, to jump to a specifc page. I was shocked to discover that that repeated my last search. Is there any way to jump to a specific page without leaving full-screen mode and navigating by the page tumbs? Right now, I tend to rewrite entire chapters, so I have less need to go to specific pages, but that will change later on. Ideally, I'd like to be able to jump from section to section, too.

    Oddly, I never moved the cursor left to see the pages while in fullscreen mode. It's not as fast as a Cmd-[x]-[#] shortcut, but will work for my purposes.
    Thanks

  • How to print a specific page from the internet

    I have tried to print a specific page, and get about seven pages that are linked to it, without
    seeing the specific page I wanted printed out. The page settings under printer only lists header and footer
    info, and no choices to print only this page or frame. There is no way to print  one specific page on this printer?
    I always was able to do this  with the Epson printer I just replaced, but unable to with this printer.
    Please help! There must be a way to do this when printing from the internet. Thanks for any help.

    deezire
    Welcome to the HP Community Forum.
    I don't have any idea what you are trying to print, nor do I wish to know.  Smiling.
    The key may be to control this in Print Preview like you would with most things when you are printing from a Browser.
    Manage Print Output with Print Preview
    ========================================================================
    Depending on which browser you are using, you might also be able to make use of Smart Print:
    Downloads and Information:
    HP Printing Software
    Scroll down > look on the right side of the page under Web Page Printing for the HP Smart Print download
    How-To:
    Smart Print Help and FAQ
    Includes: How to update your installed version of Smart Print:
    #6: How do I get the latest version of Smart Print?
    Smart Print updates automatically using the default settings. You can choice to update manually by selecting the "?" on the Smart Print Preview/Print bar located in the upper left corner of Smart Print. Select the Updates tab to get the latest version.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • How to create a table of contents (TOC) linking to specific pages of different (multiple) PDFs

    Hi All,
    I would like to create clickable Table of Contents (TOC) that can lead to a sub clickable TOC that would lead to a specific page of different PDFs within a folder.
    Is that possible?
    Secondly, is is possible to create a search box that upon typing a specific word (not related to text within the PDFs), that word to be linked to a specific page of a particular PDF out of many within a folder?
    To make it more clear, I have a database of specifications of equipment and drawings of a building, all in multiple PDF files. I would like to be able to unify all those PDFs and if I type the room number of the building to be presented with a menu of choces pointing to services assosiated with that room, being elctrical power drawings, lighting drawings or drawings of Air Conditioning and Ducting associated with that room. So I type a room number, then I get a menu of Power, Lights, Fire Alarm, or Ducting all associated with that room, then if I click Fire Alarm to be directed straight to the drawing within a PDF related to that room.
    Thanks

    I would say: Try and Error. Create a copy of your document and unmark in the copied document in the document inspector all boxes for the TOC. Then mark them again. Maybe you should also delete the paragraph styles and mark them again. If that doesn't work, try to copy the complete text of your document to a new created one. Maybe that works.
    Good luck!
    P.S.: If that doesn't work look here. Maybe this helps.

Maybe you are looking for