Nasty page flash on swf pop up in IE 7 only - fix?

Go to
http://www.enhancedwireless.net/Technology/patentPortfolio.shtml
and rollover 71 Countries...
I know that it works on IE 7, but when you
rollover the "71 countries," the entire page has a nasty
flash to it as the
pop up is activated - in other words, the whole browser
window for a split
second flashes...that's not supposed to happen and doesn't
happen on any
browser except IE 7.
Would love a fix. Anyone?
KB

Thanks for reply - yes I know it pops up in IE 7, but only in
IE 7 there is an awful page flash when you rollover the 71
countries - very bad - the whole browser window flashes with a
strange flash for a split second - so how to fix this in IE 7?
KB

Similar Messages

Nasty page flash on swf pop up in IE 7 - fix?

Go to
http://www.enhancedwireless.net/Technology/patentPortfolio.shtml
and rollover 71 Countries...
I know that it works on IE 7, but when you
rollover the "71 countries," the entire page has a nasty
flash to it as the
pop up is activated - in other words, the whole browser
window for a split
second flashes...that's not supposed to happen and doesn't
happen on any
browser except IE 7.
Would love a fix. Anyone?
KB

Thanks for reply - yes I know it pops up in IE 7, but only in
IE 7 there is an awful page flash when you rollover the 71
countries - very bad - the whole browser window flashes with a
strange flash for a split second - so how to fix this in IE 7?
KB

Blank page flashes between SWF pages

Hi all!
I am building my first Flash website and have a small
problem.
I am building it using individual SWF files for each page.
However, when I click a button to navigate from one page to
another, I am getting a flashing blank screen for just a split
second. What i mean is, it doesn't quite flow from one page into
another - just for a split second, a blank screen appears.
Anyone got any idea why this is and how to get rid of it???
THANKS ALL!
Liam

Hi!
This is probably because it takes a bit of time to load the
files, and you
destroy the previous page before the new page is loaded. So
even if this is
fast on your connection, a slower connection would maybe see
an even longer
"blink".
What you need to do is do some kind of preloading of the
page, and wait with
exchanging the view of one page to the next until the new
page is fully
loaded. You can learn about preloading .swf files at:
http://www.gotoandlearn.com/
/Jensen/
"liamfahy" <[email protected]> wrote in
message
news:e80gaa$8r2$[email protected]..
> Hi all!
>
> I am building my first Flash website and have a small
problem.
>
> I am building it using individual SWF files for each
page. However, when I
> click a button to navigate from one page to another, I
am getting a
> flashing
> blank screen for just a split second. What i mean is, it
doesn't quite
> flow
> from one page into another - just for a split second, a
blank screen
> appears.
>
> Anyone got any idea why this is and how to get rid of
it???
>
> THANKS ALL!
>
> Liam
>

Page Flashes Yellow when Page Loads

Hi, I actually have a web guy doing a site for a client of
mine, but when the site loads, the whole background flashes bright
yellow and subsequently each page flashes yellow before it loads as
well, but only once. Web guy took out the SWF animations I sent him
and the flashing stopped. I've given SWF animations to other web
designers and this hasn't happened. Would someone be kind enough to
look at the site and let me know if they have any ideas. It's still
a work in progress. Here's the link:
http://www.trendmultimedia.com/arrowhead3/index.html">website[/L]

In the site CSS, there is this:
body {
background-color: #FFFF00; /**this is yellow**/
Change it to dark blue.
Also, that page has some html errors including 2
</body> </body> tags at the
end of the document. Only one end of body tag is required.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Mediadude8" <[email protected]> wrote in
message
news:gbg5r6$14q$[email protected]..
> Hi, I actually have a web guy doing a site for a client
of mine, but when
the
> site loads, the whole background flashes bright yellow
and subsequently
each
> page flashes yellow before it loads as well, but only
once. Web guy took
out
> the SWF animations I sent him and the flashing stopped.
I've given SWF
> animations to other web designers and this hasn't
happened. Would someone
be
> kind enough to look at the site and let me know if they
have any ideas.
It's
> still a work in progress. Here's the link:
>
http://www.trendmultimedia.com/arrowhead3/index.html
>

How to add a dropdown menu in flash document (.swf, .fla) ??

How to add a dropdown menu in flash document (.swf, .fla) ??
as i am developing a website for my semester proj, i need to add some flash contetn in the website..
here is the link, http://www.mediafire.com/?wnx1jkwkkx9c118
Check Out..
the thing is i want a dropdown list/menu in "language selection - tab " (check the html page in above link).. plz help me out..
Thank You,
sairam

For Flash questions check the Flash Forums.
http://forums.adobe.com/community/flash
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

How to detect end of flash movie (SWF file) in Javascript

I have used Dreamweaver CS4 to integrate my SWF file as shown
below. So far so good. See GoToNext()
my website
What I wouldd like to do is have the SWF movie trigger a
javascript function in my html page when the video is stopped
playing (i.e. when it is finished) There are no controlls in that
SWF file - it is basically am add banner. I would think this would
be easiest done by rasinng an event in SWF that is communicated to
javascript, where I can add an event listener, and thus trigger my
function.
How can this be done in the simplest way?
<div id="bodyFlash"
class="clearfloat"><p> </p>
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="760"
height="150" id="FlashID" title="Chillifire Banner">
<param name="movie" value="flash/chillifire.swf" />
<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<param name="swfversion" value="6.0.65.0" />

<param name="expressinstall"
value="Scripts/expressInstall.swf" />


<object type="application/x-shockwave-flash"
data="flash/chillifire.swf" width="760" height="150">

<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<param name="swfversion" value="6.0.65.0" />
<param name="expressinstall"
value="Scripts/expressInstall.swf" />

<div>
<h4>Content on this page requires a newer version of
Adobe Flash Player.</h4>
<p><a href="
http://www.adobe.com/go/getflashplayer"><img
src="
http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif"
alt="Get Adobe Flash player" width="112" height="33"
/></a></p>
</div>

</object>

</object>
</div>
...

on the last frame in the banner file you can use the
ExternalInterface class to call a specific JS method, and even pass
data if needed.

Flash Player security Pop up when using camera and microphone.

Hello Friends
Can any body suggest me how to remove flash player security pop up for camera and microphone through coding.
Thanks in advance.

The security pop-up was first introduced with FP7. If you want to bypass it I can name two ways off the top of my head:
1. Regardless of ActionScript version (2.0/3.0) in the Flash authoring enviroment, in the Publish Settings dialogue box, the Flash tab, near the bottom choose Access Network Only from Local Playback Security.
2. Publish your movie as a projector. Both of these techniques will allow to "play" your swf file locally.

When I reload an HTM page using a SWF file like a   menu, the HTML page doesn't shows the SWF again!

Dear Sirs,
I hope to be directing my question into the correct forum's place.
I'm new in flash and I'm trying to make some tests
My problem is the following:
I included one SWF file into 3 HTM pages.
This SWF works as a little menu.
The SWF file (named "menu.swf") contains 3 items working as command buttons to access the three different HTM pages
Each HTM page contains the same "menu.SWF" file, some HTML text and one picture.
The swf contains:
Button 1 -> calls page1.htm using:
            on (press) {
            getURL("./page1.htm", "_top");
Button 2 -> calls page2.htm using:
            on (press) {
            getURL("./page2.htm", "_top");
Button 3 -> calls page3.htm using:
            on (press) {
            getURL("./page3.htm", "_top");
When I enter to "page1.htm" it appears correctly showing the swf file and all the HTML text.
It is OK.
But when I'm in "page1.htm" and I click on "Button1" (to reload "page1.htm") the only thing that I can see (after reloading page1) is the HTML text and the picture, but I cannot view the "menu.swf" file.
"menu.swf" remains in its place, but "invisible".
You can click on its command buttons, but anytime I click on the button that loads the same page (for example: "Button 1" to reload "page1.htm") the
swf file(s) doesn't appears.
The same thing happens when I'm in page 2 with Button 2 to reload page2 .htm, and so on.
How can I do to solve this problem?
Sorry for my not good english but I'm spanish speaker.
Thank you!
Gus

The path in the buttons is not correct once you navigate to the htm page.
So here you are on the landing page and the menu button says to get to "page1.htm" go up one folder level (../) to the file page1.htm.
Now once you are up one level, either you loose access to the .swf because from that page the path to the .swf is not correct, or if the .swf does show, then the path in the buttons back to the other pages is not correct, because you are now one folder level higher.
If I am mis-reading your post and all pages are in the same folder, then remove the "../" part before the page name in the URL. Or perhaps you are using ./ to denote the current directory... I'd still suggest removing it. So the the getURL would look like this :
getURL("page1.htm", "_top");
if all pages are in the same folder.
And if I am reading your post correctly, then you cannot use the same button URL to get to ("./page1.htm", "_top"); and once on page1.htm use that same URL to get back down to your landing page.
So I'd say it's a pathing problem.
Give that a try and see if it helps.
Best wishes,
Adninjastrator

Flash 8 SWF loading Flash 6 and 7 SWF with quality issues

I have made a Flash 8 .exe that "loadmovie"s a
Captivate(Flash 6) SWF. The animation screenshots come out blurred
when the SWF is loaded in the Flash 8 .exe. If I create a test
Flash 7 .exe, this does not happen. Any Ideas?
PS - I need to use Flash 8 because of filters and VP6
video.

It's not completely clear what you're saying.
Do you have a wrapper SWF that first dynamically loads the
Flash 6 movie? If so, then is that wrapper in Flash 8 format? If
that's the case, then if someone has only the Flash 6 Player then
it may not be displayed anyway.
If what you're doing is loading the Flash 8 movie into Level
0 of the Flash 6 movie, then this may be causing some of the mess
you're experiencing.
Normally there are two ways to catch a viewer that doesn't
have the Flash 8 Player: 1) a detection script, which usually
works, and is part of many of the HTML templates that are built
into Flash (HTML Settings panel); or 2) Put the Flash 6 movie on a
separate HTML page from the Flash 8 SWF.

Acrobat reader X unable to display flash content (swf) why?

Basically we have a OBIEE dashboard page which has some flash content and we also have the ability to download/ export this swf file into PDF
when i try to export it and save it to my local machin the pdf file opens but it just shows an empty page with the SWF placeholder nor does it play the movie.
My system config:
Windows 7
Flash player 10 debugger version
Adobe acrobat reader X version 10.0.0.0
But when i do the same on my friends laptop it works fine..
(he has similar configurations but Dell laptop and both connecting to same server to download pdf)
WHY is this happening and how do i resolve this?
HELP PLEASE!

Post your problem in the forum for Adobe Reader.

Flash 6 and flash 8 swf on same site

bob ayers tax website
initially, i load a FLASH 6 swf to tell visitors to upgrade
to FLASH 8 ...
when they click to enter website, i unload the FLASH 6 movie
from level 0 and load the FLASH 8 swf to level 0 ...
problem is that (what i suspect to be) remnants (blue
horizontal lines) of the FLASH 6 appear in the background of the
FLASH 8 movie ...
any suggestions?
thanx!

It's not completely clear what you're saying.
Do you have a wrapper SWF that first dynamically loads the
Flash 6 movie? If so, then is that wrapper in Flash 8 format? If
that's the case, then if someone has only the Flash 6 Player then
it may not be displayed anyway.
If what you're doing is loading the Flash 8 movie into Level
0 of the Flash 6 movie, then this may be causing some of the mess
you're experiencing.
Normally there are two ways to catch a viewer that doesn't
have the Flash 8 Player: 1) a detection script, which usually
works, and is part of many of the HTML templates that are built
into Flash (HTML Settings panel); or 2) Put the Flash 6 movie on a
separate HTML page from the Flash 8 SWF.

[Flash] Creador de pop up

http://www.flash-db.com/PopUp/

The security pop-up was first introduced with FP7. If you want to bypass it I can name two ways off the top of my head:
1. Regardless of ActionScript version (2.0/3.0) in the Flash authoring enviroment, in the Publish Settings dialogue box, the Flash tab, near the bottom choose Access Network Only from Local Playback Security.
2. Publish your movie as a projector. Both of these techniques will allow to "play" your swf file locally.

How can I disable warning: "This page contains some SWF objects..."

"This page contains some SWF objects that may not work properly in the most recent version of IE..."
Is there a way to suppress this warning?! I'm doing a find and replace on an old web site, which does not pay well! and this pops up on every page. I have to click on it to continue every time. Making me mad.
Thanks

Thanks for answering. In my case that won't work because I'm doing a global find and replace of some text.
I agree though, that process would eliminate the message when I have to come back to edit the site again. It's just the thought of many dozens of pages that would need it and to be honest, I'm really not feeling that motivated to do all the up front work right now
Like I said, there should have been a setting for this...

Insert animated gif or flash files (.swf) in Form?

How can i insert animated gif or flash files (.swf) or another type of animated files in Form?

If you are web deployed you can put an animated gif as the image to an iconic button.
Image items cannot display animated gifs.
Anything else you can do through a JavaBean if you need to.

Pop-up allows first pop-up page and the second pop-up page (linked from the first one) but does not open the data in the second pop-up page.

I want to print my online bank statement.
Please see screen shots below.
The webpage has a link that says:
VIEW STATEMENT
Click the link and a pop-up opens that warns you about downloading using a public-access computer or sharing a computer with others.
If you want to continue click OKAY.
When you click this link another pop-up appears (a pop-up within a pop-up)
but it is blank.
When the process used to work, the statement would appear.
MacBook running OS X 10.6.8
When I tried it with Safari everything worked as it should so the problem is not with the bank.
I went back to Firefox (my preferred browser) and did the troubleshooting RESET.
Nothing changed.
In the Tools menu - Page Info - Permission - Open Pop-up Windows is set @ Default - Allow
In Preference - Content - Block pop-up windows is unchecked
or when it is checked the website is listed in the Allowed column.
It is the correct url because when I clicked the yellow options bar to Allow it, FireFox automatically chose it.
I also tried adding the extended url as it appears on the web page which has the first pop-up link.
Firefox would not accept it.

Screenshots:
# Part of bank's webpage with the link to the first pop-up
# The first pop-up page with link to the statement pop-up page.
# The second pop-up page - blank where there should be the statement. The page appears but the data doesn't.

Nasty page flash on swf pop up in IE 7 only - fix?

Similar Messages

Maybe you are looking for